Search

The synthesis and applications of anisotropic nanostructures have attracted much attention in the last decade. The nanoflower-type structures are one of the nanomaterials with anisotropic structures most investigated because of owing to high densities of edges, corners, and stepped atoms present on their nano-petals. Here, silver nanoparticles obtained by a one-step green synthesis method using extract from Kalanchoe Daigremontiana´s leaves are reported. To identify the compounds responsible for reduction of silver ions, the functional groups present in plant extract were investigated by UV-vis and FTIR. Ag nanoparticles were characterized by UV-vis, XPS, ζ-potential, XRD, and SEM-EDS. Different solvents were used to eliminate agglomeration of the silver nanoparticles. These solvents produced nanoflower-like morphology with abundant nano-petals. This is the first report of the synthesis of Ag nanoflowers formed by green synthesis method using Kalanchoe Daigremontiana extract. The synthesized Ag nanoflowers are faced center cubic structure in nature with a petal thickness approximately of 25 nm. Photocatalytic activity of the different Ag nanostructures was evaluated through the degradation of methylene blue, where the degradation time as low as 1 min is reported. Furthermore these green synthesized Ag nanoflowers were found to show high antibacterial activity against Gram-negative bacteria Escherichia coli and Gram-positive Staphylococcus aureus., (Copyright © 2019 Elsevier B.V. All rights reserved.)

Downstream waste from industry and other industrial processes could increase concentration of heavy metals in water. These pollutants are commonly removed by adsorption because it is an effective and economical method. Previously, we reported adsorption capacity of a chitosan/polyurethane/titanium dioxide (TiO₂) composite for three ions in a dynamic wastewater system. There, increasing the chitosan concentration in composite increased the cation removal as well; however, for ratios higher than 50% of chitosan/TiO₂, the manufacturing cost increased significantly. In this work, we address the manufacturing cost problem by proposing a new formulation of the composite. Our hypothesis is that inulin could replace chitosan in the composite formulation, either wholly or in part. In this exploratory research, three blends were prepared with a polyurethane matrix using inulin or/and chitosan. Adsorption was evaluated using a colorimetric method and the Langmuir and Freundlich models. Fourier-transform infrared spectroscopy (FTIR) spectra, scanning electron microscopy (SEM) micrographs, differential scanning calorimetry and thermogravimetric analysis curves were obtained to characterize blends. Results indicate that blends are suitable for toxic materials removal (specifically lead II, Pb 2+ ). Material characterization indicates that polysaccharides were distributed in polyurethane's external part, thus improving adsorption. Thermal degradation of materials was found above 200 °C. Comparing the blends data, inulin could replace chitosan in part and thereby improve the cost efficiency and scalability of the production process of the polyurethane based-adsorbent. Further research with different inulin/chitosan ratios in the adsorbent and experiments with a dynamic system are justified., Competing Interests: The authors declare no conflict of interest.

Primary immunodeficiencies (PID) are a heterogeneous group of inherited disorders, the etiology are the defects in the development or function of the immune system. The principal PID manifestations are the infections in early age, malignancy and diseases of immune dysregulation as autoimmunity and allergy. PIDs are genetics disorders and most of them are inherited as autosomal recessive, also this group of diseases is more prevalent in males and in childhood. The antibody immunodeficiency is the PID more common in adults. The more frequent disorders are the infections in the respiratory tract, abscesses, candidiasis, diarrhea, BCGosis etc. Initial approach included a complete blood count and quantification of immunoglobulins. The delay in diagnosis could be explained due to a perception that the recurrent infections are normal process or think that they are exclusively of childhood. The early diagnosis of PID by primary care physicians is important to opportune treatment and better prognosis.

A novel, simple and inexpensive modification method using TEOS to increase the UV light, pH and temperature stability of a red-beet-pigment extracted from Beta vulgaris has been proposed. The effects on the molecular structure of betalains were studied by FTIR spectroscopy. The presence of betacyanin was verified by UV-Vis spectroscopy and its degradation in modified red-beet-pigment was evaluated and compared to the unmodified red-beet-pigment; performance improvements of 88.33%, 16.84% and 20.90% for UV light, pH and temperature stability were obtained, respectively,. Measurements of reducing sugars, phenol, and antioxidant contents were performed on unmodified and modified red-beet-pigment and losses of close to 21%, 54% and 36%, respectively, were found to be caused by the addition of TEOS. Polar diagrams of color by unmodified and modified red-beet-pigment in models of a beverage and of a yogurt were obtained and the color is preserved, although here is a small loss in the chromaticity parameter of the modified red-beet-pigment.

Dye-Sensitized Solar Cells (DSSCs), based on TiO(2) and assembled using a dye from Beta vulgaris extract (BVE) with Tetraethylorthosilicate (TEOS), are reported. The dye BVE/TEOS increased its UV resistance, rendering an increase in the cell lifetime; the performance of these solar cells was compared to those prepared with BVE without TEOS. The efficiency η for the solar energy conversion was, for BVE and BVE/TEOS, of 0.89% ± 0.006% and 0.68% ± 0.006% with a current density Jsc of 2.71 ± 0.003 mA/cm2 and 2.08 ± 0.003 mA/cm2, respectively, using in both cases an irradiation of 100 mW/cm2 at 25 °C. The efficiency of the BVE solar cell dropped from 0.9 ± 0.006 to 0.85 ± 0.006 after 72 h of operation, whereas for the BVE/TEOS, the efficiency remained practically constant in the same period of time.