Search

Hybrid complexes incorporating synthetic Mn-porphyrins into an artificial four-helix bundle domain of bacterial reaction centers created a system to investigate new electron transfer pathways. The reactions were initiated by illumination of the bacterial reaction centers, whose primary photochemistry involves electron transfer from the bacteriochlorophyll dimer through a series of electron acceptors to the quinone electron acceptors. Porphyrins with diphenyl, dimesityl, or fluorinated substituents were synthesized containing either Mn or Zn. Electrochemical measurements revealed potentials for Mn(III)/Mn(II) transitions that are ~ 0.4 V higher for the fluorinated Mn-porphyrins than the diphenyl and dimesityl Mn-porphyrins. The synthetic porphyrins were introduced into the proteins by binding to a four-helix bundle domain that was genetically fused to the reaction center. Light excitation of the bacteriochlorophyll dimer of the reaction center resulted in new derivative signals, in the 400 to 450 nm region of light-minus-dark spectra, that are consistent with oxidation of the fluorinated Mn(II) porphyrins and reduction of the diphenyl and dimesityl Mn(III) porphyrins. These features recovered in the dark and were not observed in the Zn(II) porphyrins. The amplitudes of the signals were dependent upon the oxidation/reduction midpoint potentials of the bacteriochlorophyll dimer. These results are interpreted as photo-induced charge-separation processes resulting in redox changes of the Mn-porphyrins, demonstrating the utility of the hybrid artificial reaction center system to establish design guidelines for novel electron transfer reactions., Competing Interests: Declarations. Competing interest: The authors declare no conflict of interest., (© 2023. The Author(s), under exclusive licence to Springer Nature B.V.)

The development of functional organic materials is crucial for the advancement of various fields, such as optoelectronics, energy storage, sensing, and biomedicine. In this context, we successfully prepared a stable ambipolar perfluoroporphyrin-based polymeric film by electrochemical synthesis. Our strategy involved the synthesis of a novel tetra-pentafluorophenyl porphyrin covalently linked to four 3,4-ethylenedioxythiophene (EDOT) moieties. The resulting monomer, EDOT-TPPF 16 , was obtained through a straightforward synthetic approach with a good overall yield. The unique molecular structure of EDOT-TPPF 16 serves a dual function, with EDOT moieties allowing electropolymerization for polymeric film formation, while the electron-acceptor porphyrin core enables electrochemical reduction and electron transport. The electrochemical polymerization permits the polymer (PEDOT-TPPF 16 ) synthesis and film formation in a reproducible and controllable manner in one step at room temperature. Spectroelectrochemical experiments confirmed that the porphyrin retained its optoelectronic properties within the polymeric matrix after the electrochemical polymerization. The obtained polymeric material exhibited stable redox capabilities. Current charge-discharge cycles and electrochemical impedance spectroscopy of the electrochemically generated organic film demonstrated that the polymer could be applied as a promising active material in the development of supercapacitor energy storage devices., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)

The increase in the antibiotic resistance of bacteria is a serious threat to public health. Photodynamic inactivation (PDI) of micro-organisms is a reliable antimicrobial therapy to treat a broad spectrum of complex infections. The development of new photosensitizers with suitable properties is a key factor to consider in the optimization of this therapy. In this sense, four corroles were designed to study how the number of cationic centers can influence the efficacy of antibacterial photodynamic treatments. First, 5,10,15-Tris(pentafluorophenyl)corrole ( Co ) and 5,15-bis(pentafluorophenyl)-10-(4-(trifluoromethyl)phenyl)corrole ( Co-CF 3 ) were synthesized, and then derivatized by nucleophilic aromatic substitution with 2-dimethylaminoethanol and 2-(dimethylamino)ethylamine, obtaining corroles Co-3NMe 2 and Co-CF 3 -2NMe 2 , respectively. The straightforward synthetic strategy gave rise to macrocycles with different numbers of tertiary amines that can acquire positive charges in an aqueous medium by protonation at physiological pH. Spectroscopic and photodynamic studies demonstrated that their properties as chromophores and photosensitizers were unaffected, regardless of the substituent groups on the periphery. All tetrapyrrolic macrocycles were able to produce reactive oxygen species (ROS) by both photodynamic mechanisms. Uptake experiments, the level of ROS produced in vitro, and PDI treatments mediated by these compounds were assessed against clinical strains: methicillin-resistant Staphylococcus aureus and Klebsiella pneumoniae . In vitro experiments indicated that the peripheral substitution significantly affected the uptake of the photosensitizers by microbes and, consequently, the photoinactivation performance. Co-3NMe 2 was the most effective in killing both Gram-positive and Gram-negative bacteria (inactivation > 99.99%). This work lays the foundations for the development of new corrole derivatives having pH-activable cationic groups and with plausible applications as effective broad-spectrum antimicrobial photosensitizers.

Invasive candidiasis is an important cause of morbidity and mortality, and its occurrence is increasing due to the growing complexity of patients. In particular, Candida albicans exhibits several virulence factors that facilitate yeast colonization in humans. In this sense, the photodynamic inactivation of yeasts is a promising new alternative to eliminate fungal infections. Herein, the photodynamic activity sensitized by a free-base chlorin (TPCF 16 ) and its complexes with Zn(II) (ZnTPCF 16 ) and Pd(II) (PdTPCF 16 ) was investigated in order to eliminate C. albicans under different forms of cell cultures. A decrease in cell survival of more than 5 log was found in planktonic cells incubated with 5 μM TPCF 16 or ZnTPCF 16 upon 15 min of white-light irradiation. The mechanism of action mainly involved a type II pathway in the inactivation of C. albicans cells. In addition, the photodynamic action induced by these chlorins was able to suppress the growth of C. albicans in a culture medium. These photosensitizers were also effective to photoinactivate C. albicans pseudohyphae suspended in PBS. Furthermore, the biofilms of C. albicans that incorporated the chlorins during the proliferation stage were completely eradicated using 5 μM TPCF 16 or ZnTPCF 16 after 60 min of light irradiation. The studies indicated that these chlorins are effective photosensitizing agents to eliminate C. albicans as planktonic cells, pseudohyphae, and biofilms.

The appearance of microbes resistant to antibiotics requires the development of alternative therapies for the treatment of infectious diseases. In this work two polymers, PTPPF 16 -EDA and PZnTPPF 16 -EDA, were synthesized by the nucleophilic aromatic substitution of 5,10,15,20-tetrakis(pentafluorophenyl)porphyrin and its Zn(II) complex with ethylenediamine, respectively. In these structures, the tetrapyrrolic macrocycles were N , N '-ethylene crosslinked, which gives them greater mobility. The absorption spectra of the polymers showed a bathochromic shift of the Soret band of ~10 nm with respect to the monomers. This effect was also found in the red fluorescence emission peaks. Furthermore, both polymeric materials produced singlet molecular oxygen with high quantum yields. In addition, they were capable of generating superoxide anion radicals. Photodynamic inactivation sensitized by these polymers was tested in Staphylococcus aureus and Escherichia coli bacteria. A decrease in cell viability greater than 7 log (99.9999%) was observed in S. aureus incubated with 0.5 μM photosensitizer upon 30 min of irradiation. Under these conditions, a low inactivation of E. coli (0.5 log) was found. However, when the cells were treated with KI, the elimination of the Gram-negative bacteria was achieved. Therefore, these polymeric structures are interesting antimicrobial photosensitizing materials for the inactivation of pathogens.

A novel BOPHY-fullerene C 60 dyad (BP-C 60 ) was designed as a heavy-atom-free photosensitizer (PS) with potential uses in photodynamic treatment and reactive oxygen species (ROS)-mediated applications. BP-C 60 consists of a BOPHY fluorophore covalently attached to a C 60 moiety through a pyrrolidine ring. The BOPHY core works as a visible-light-harvesting antenna, while the fullerene C 60 subunit elicits the photodynamic action. This fluorophore-fullerene cycloadduct, obtained by a straightforward synthetic route, was fully characterized and compared with its individual counterparts. The restricted rotation around the single bond connecting the BOPHY and pyrrolidine moieties led to the formation of two atropisomers. Spectroscopic, electrochemical, and computational studies disclose an efficient photoinduced energy/electron transfer process from BOPHY to fullerene C 60 . Photodynamic studies indicate that BP-C 60 produces ROS by both photomechanisms (type I and type II). Moreover, the dyad exhibits higher ROS production efficiency than its individual constitutional components. Preliminary screening of photodynamic inactivation on bacteria models (Staphylococcus aureus and Escherichia coli) demonstrated the ability of this dyad to be used as a heavy-atom-free PS. To the best of our knowledge, this is the first time that not only a BOPHY-fullerene C 60 dyad is reported, but also that a BOPHY derivative is applied to photoinactivate microorganisms. This study lays the foundations for the development of new BOPHY-based PSs with plausible applications in the medical field., (© 2021 Wiley-VCH GmbH.)

The widespread use of antibiotics has led to a considerable increase in the resistance of microorganisms to these agents. Consequently, it is imminent to establish new strategies to combat pathogens. An alternative involves the development of photoactive polymers that represent an interesting strategy to kill microbes and maintain aseptic surfaces. In this sense, a conjugated polymer (PZnTEP) based on Zn(II) 5,10,15,20-tetrakis-[4-(ethynyl)phenyl]porphyrin (ZnTEP) was obtained by the homocoupling reaction of terminal alkyne groups. PZnTEP exhibits a microporous structure with high surface areas allowing better interaction with bacteria. The UV-visible absorption spectra show the Soret and Q bands of PZnTEP red-shifted by about 18 nm compared to those of the monomer. Also, the conjugate presents the two red emission bands, characteristic of porphyrins. This polymer was able to produce singlet molecular oxygen and superoxide radical anion in the presence of NADH. Photocytotoxic activity sensitized by PZnTEP was investigated in bacterial suspensions. No viable Staphylococcus aureus cells were detected using 0.5 µM PZnTEP and 15 min irradiation. Under these conditions, complete photoinactivation of Escherichia coli was observed in the presence of 100 mM KI. Likewise, no survival was detected for E. coli incubated with 1.0 µM PZnTEP after 30 min irradiation. Furthermore, polylactic acid surfaces coated with PZnTEP were able to kill efficiently these bacteria. This surface can be reused for at least three photoinactivation cycles. Therefore, this conjugated photodynamic polymer is an interesting antimicrobial photoactive material for designing and developing self-sterilizing surfaces.

Two novels structurally related pyrrolidine-fused chlorins were synthesized from 5,10,15,20-tetrakis(pentafluorophenyl)chlorin by nucleophilic aromatic substitution of the para-fluoro groups. The reaction with 2-dimethylaminoethanol produced TPCF 16 -NMe 2 in 77% yield, while TPCF 16 -NBu was obtained using butylamine in 87% yield. The latter was extensively methylated to form TPCF 16 -N + Bu in 92% yield. The synthetic strategy was designed to compare the effect of charge density distribution on chlorin in the efficacy to induce photodynamic inactivation of pathogens. TPCF 16 -NMe 2 has five tertiary amines that can acquire positive charges in aqueous medium by protonation. Furthermore, four of the cationic groups are located in amino groups linked to the chlorine macrocycle by an aliphatic structure of two carbon atoms, which gives it greater movement capacity. In contrast, TPCF 16 -N + Bu presents intrinsic positive charges on aromatic rings. Absorption and fluorescence emission properties were not affected by the peripheral substitution on the chlorin macrocycle. Both photosensitizers (PSs) were able to form singlet molecular oxygen and superoxide anion radical in solution. Uptake and photodynamic inactivation mediated by these chlorins were examined on Staphylococcus aureus and Escherichia coli. Both phototherapeutic agents produced efficient photoinactivation of S. aureus. However, only TPCF 16 -NMe 2 was rapidly bound to E. coli cells and this chlorin was effective to photoinactivate both strains of bacteria using lower concentrations and shorter irradiation periods. Our outcomes reveal that the charge density distribution is a key factor to consider in the development of new PSs. Accordingly, this work stands out as a promising starting point for the design of new tetrapyrrolic macrocycles with application in PDI., (Copyright © 2021 Elsevier B.V. All rights reserved.)

In this article, four novel fulleropyrrolidines derivatives were synthesized to study how the effect of polarity and positive charge distribution can influence the efficacy of photodynamic inactivation treatments to kill bacteria. The design of the photosensitizers was based on DFT calculations that allowed us to estimate the dipolar moment of the molecules. Neutral compounds bearing N-methyl bis-acetoxy-ethyl (1) and bis-hydroxyethyl (2) amine were the starting material to obtain the dicationic analogs N,N-dimethyl bis-methoxyethyl (3), and bis-acetoxy-ethyl) (4) methylammonio. As expected from fullerene C 60 derivatives, compounds 1-4 absorb in the UV region, with a peak at 430 nm, a broader range of absorption up to 710 nm, and exhibit weak fluorescence emission in toluene and reverse micelles. In the biomimetic AOT micellar system, the highest singlet oxygen photosensitization was found for compounds 1, followed by 3, 2, and 4. Whereas 4 was the most effective reducing nitro blue tetrazolium in the presence of β-NADH. The influence of type I and type II mechanism on the photodynamic activity of compounds 3 and 4 was further examined in the presence of L-tryptophan and two reactive oxygen species scavengers. In vitro experiments indicated that the compounds with the highest dipolar moments, 3 (37.19 D) and 4 (38.46 D), inactivated methicillin-resistant Staphylococcus aureus and Escherichia coli bacteria using an energy dose <2.4 J cm -2 . No inactivation was observed for the neutral analogs with the lowest dipolar moments. These findings help to optimize sensitizer structures to improve photodynamic inactivation., (© 2021 American Society for Photobiology.)

Upon photoinitiated electron transfer, charge recombination limits the quantum yield of photoredox reactions for which the rates for the forward reaction and back electron transfer are competitive. Taking inspiration from a proton-coupled electron transfer (PCET) process in Photosystem II, a benzimidazole-phenol (BIP) has been covalently attached to the 2,2'-bipyridyl ligand of [Ir(dF(CF 3 )ppy) 2 (bpy)][PF 6 ] (dF(CF 3 )ppy = 2-(2,4-difluorophenyl)-5-(trifluoromethyl)pyridine; bpy = 2,2'-bipyridyl). Excitation of the [Ir(dF(CF 3 )ppy) 2 (BIP-bpy)][PF 6 ] photocatalyst results in intramolecular PCET to form a charge-separated state with oxidized BIP. Subsequent reduction of methyl viologen dication (MV 2+ ), a substrate surrogate, by the reducing moiety of the charge separated species demonstrates that the inclusion of BIP significantly slows the charge recombination rate. The effect of ∼24-fold slower charge recombination in a photocatalytic phthalimide ester reduction resulted in a greater than 2-fold increase in reaction quantum efficiency.

A photostable and photodynamic antimicrobial surface was successfully obtained and applied to photoinactivate microorganisms. This approach was based on the synthesis of a fullerene C 60 derivative (EDOT-C 60 ) where fullerene C 60 is covalently linked to 3,4-ethylenedioxythiophene (EDOT) through a 1,3-dipolar cycloaddition reaction. This dual-functional monomer bears an EDOT center connected via an alkyl chain to a fullerene C 60 moiety. In this structure, EDOT acts as an electropolymerizable unit that allows the film formation over conducting substrates, while fullerene C 60 performs the photodynamic antimicrobial activity. Electrochemical polymerization of EDOT was used to obtain stable and photodynamic polymeric films (PEDOT-C 60 ) in a controllable procedure. Cyclic voltammetry and UV-visible spectroscopy studies showed that the fullerene C 60 units were not altered during the electropolymerization process, obtaining surfaces with high fullerene content. Photobleaching measurements demonstrated that the electropolymerized films were highly photostable. Moreover, photodynamic properties of PEDOT-C 60 were compared with fullerene C 60 and showed that electrodeposited films were able to generate reactive oxygen species (ROS) through the two photomechanisms, producing singlet molecular oxygen (type II) and superoxide radical anion (type I). All studies demonstrated that fullerene C 60 moieties covalently attached to the polymeric matrix mainly conserve the photodynamic characteristics. Hence, photodynamic action sensitized by PEDOT-C 60 was assessed in vitro against Staphylococcus aureus . The photosensitized inactivation by the electropolymerized films on bacteria suspensions produced >99.9% reduction in S. aureus survival. Fluorescence microscopy experiments with S. aureus adhered to the PEDOT-C 60 surface showed a complete microbe annihilation. Also, the eradication of biofilms formed on PEDOT-C 60 surfaces resulted in a photokilling >99.9% after visible light irradiation. Our results demonstrated that these antimicrobial photodynamic polymeric films are a promising and versatile platform to photoinactivate microorganisms and to obtain photostable self-sterilizing surfaces., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)

Herein, we report the use of polylactic acid coated with a halogenated BODIPY photosensitizer (PS) as a novel self-sterilizing, low-cost, and eco-friendly material activated with visible light. In this article, polymeric surfaces were 3D-printed and treated with the PS using three simple methodologies: spin coating, aerosolization, and brush dispersion. Our studies showed that the polymeric matrix remains unaffected upon addition of the PS, as observed by dynamic mechanical analysis, Fourier transform infrared, scanning electron microscopy (SEM), and fluorescence microscopy. Furthermore, the photophysical and photodynamic properties of the dye remained intact after being adsorbed on the polymer. This photoactive material can be reused and was successfully inactivating methicillin-resistant Staphylococcus aureus and Escherichia coli in planktonic media for at least three inactivation cycles after short-time light exposure. A real-time experiment using a fluorescence microscope showed how bacteria anchored to the antimicrobial surface were inactivated within 30 min using visible light and low energy. Moreover, the material effectively eradicated these two bacterial strains on the first stage of biofilm formation, as elucidated by SEM. Unlike other antimicrobial approaches that implement a dissolved PS or non-sustainable materials, we offer an accessible green and economic alternative to acquire self-sterilizing surfaces with any desired shape.

Langmuir and Langmuir-Blodgett films holding a synthetic bioinspired wound healing active compound were used as drug-delivery platforms. Palmitic acid Langmuir monolayers were able to incorporate 2-methyltriclisine, a synthetic Triclisine derivative that showed wound healing activity. The layers proved to be stable and the nanocomposites were transferred to solid substrates. Normal human lung cells (Medical Research Council cell strain 5, MRC-5) were grown over the monomolecular Langmuir-Blodgett films that acted as a drug reservoir and delivery system. The proliferation and migration of the cells were clearly affected by the presence of 2-methyltriclisine in the amphiphilic layers. The methodology is proposed as a simple and reliable model for the study of the effects of bioactive compounds over cellular cultures., Competing Interests: The authors declare no conflict of interest., (© 2021 The Author(s).)

A nanoplatform concept was developed to synthesize accessible photoactive magnetic nanoparticles (MNPs) of Fe 3 O 4 coated with silica. This approach was based on the covalent binding of 5,10,15,20-tetrakis(pentafluorophenyl)porphyrin (TPPF 20 ) to aminopropyl-grafted MNPs by nucleophilic aromatic substitution reaction (S N Ar) to obtain conjugate MNP-P1. After in situ modification, the remaining pentafluorophenyl groups of TPPF 20 attached to MNPs were substituted by dimethylaminoethoxy groups to form MNP-P2. The basic amine group of these conjugates can be protonated in aqueous media. In addition, MNP-P1 and MNP-P2 were intrinsically charged to produce cationic conjugates MNP + -P1 and MNP + -P2 + by methylation. All of them were easily purified by magnetic decantation in high yields. The average size of the MNPs was ∼15 nm, and the main difference between these conjugates was the greater coating with positive charges of MNP + -P2 + , as shown by the zeta potential values. Absorption spectra exhibited the Soret and Q bands characteristic of TPPF 20 linked to MNPs. Furthermore, these conjugates showed red fluorescence emission of porphyrin with quantum yields of 0.011-0.036. The photodynamic effect sensitized by the conjugates indicated the efficient formation of singlet molecular oxygen in different media, reaching quantum yield values of 0.17-0.34 in N , N -dimethylformamide. The photodynamic activity of the conjugates was evaluated to inactivate the Gram-positive bacteria Staphylococcus aureus , the Gram-negative bacteria Escherichia coli, and the yeast Candida albicans . The modified cationic MNP + -P2 + was the most effective conjugate for photodynamic inactivation (PDI) of microorganisms. Binding of this conjugate to bacteria and photoinactivation capability was checked by means of fluorescence microscopy. Also, sustainable use by recycling was determined after three PDI treatments. Therefore, this methodology is a suitable scaffold for the in situ modification of conjugates, and in particular, MNP + -P2 + represents a useful photodynamic active material to eradicate microorganisms.

The antimicrobial capability and recyclability of two conjugates that combines the versatility of iron oxide magnetic nanoparticles (MNPs) with the high photosensitizing proficiency of boron-dipyrromethene (BODIPY) dyes are assessed. By a relatively simple synthetic pathway, two conjugates were obtained. The first one, MNP-B1, contains a highly fluorescent dye for bioimaging and suitable inactivating properties. The other one, MNP-B2, is optimized to improve the production of cytotoxic reactive oxygen species (ROS) by incorporating heavy atoms in the BODIPY core. In vitro experiments in bacterial cell suspensions and at the single bacterium level reveal that both conjugates can inactivate either Gram-positive (methicillin-resistant Staphylococcus aureus ) and Gram-negative ( Escherichia coli ) bacteria. By means of fluorescence microscopy, not only cellular uptake of the conjugates but also recyclability and sustained performance over the cycles of photodynamic inactivation (PDI) are demonstrated. This is the first time that MNPs functionalized with BODIPY dyes are utilized to obtain fluorescent images of bacterial cells and photoinactivate pathogens.

Herein we report a simple fluorescence microscopy methodology that, jointly with four photosensitizers (PSs) and a cell viability marker, allows monitoring of phenotypic bacterial resistance to photodynamic inactivation (PDI) treatments. The PSs, composed of BODIPY dyes, were selected according to their ability to interact with the cell wall and the photoinactivating mechanism involved (type I or type II). In a first approach, the phenotypic heterogeneity allowing bacteria to persist during PDI treatment was evaluated in methicillin-resistant Staphylococcus aureus (MRSA) and Escherichia coli as Gram-positive and Gram-negative models, respectively. By means of propidium iodide (PI), we monitored with spatiotemporal resolution cell viability at the single bacterium level. All the PSs were effective at inactivating pathogens; however, the cationic nonhalogenated PS (compound 1 ) surpassed the others and was capable of photoinactivating E. coli even under optimal growth conditions. Compound 1 was further tested on two other Gram-negative strains, Pseudomonas aeruginosa and Klebsiella pneumonia e , with outstanding results. All bacterial strains used here are well-known ESKAPE pathogens, which are the leading cause of nosocomial infections worldwide. Thorough data analysis of individual cell survival times revealed clear phenotypic variation expressed in the cell wall that affected PI permeation and thus its intercalation with DNA. For the same bacterial sample, death times may vary from seconds to hours. In addition, the PI incorporation time is also a parameter governed by the phenotypic characteristics of the microbes. Finally, we demonstrate that the results gathered for the bacteria provide direct and unique experimental evidence that supports the time-kill curve profiles.

A novel biscarbazol triphenylamine end-capped dendrimeric zinc(II) porphyrin ( DP 5 ) was synthesized by click chemistry. This compound is a cruciform dendrimer that bears a nucleus of zinc(II) tetrapyrrolic macrocycle substituted at the meso positions by four identical substituents. These are formed by a tetrafluorophenyl group that possesses a triazole unit in the para position. This nitrogenous heterocyclic is connected to a 4,4'-di( N -carbazolyl)triphenylamine group by means of a phenylenevinylene bridge, which allows the conjugation between the nucleus and this external electropolymerizable carbazoyl group. In this structure, dendrimeric arms act as light-harvesting antennas, increasing the absorption of blue light, and as electroactive moieties. The electrochemical oxidation of the carbazole groups contained in the terminal arms of the DP 5 was used to obtain novel, stable, and reproducible fully π-conjugated photoactive polymeric films ( FDP 5 ). First, the spectroscopic characteristics and photodynamic properties of DP 5 were compared with its constitutional components derived of porphyrin P 6 and carbazole D 7 moieties in solution. The fluorescence emissions of the dendrimeric units in DP 5 were more strongly quenched by the tetrapyrrolic macrocycle, indicating photoinduced energy transfer. In addition, FDP 5 film showed the Soret and Q absorption bands and red fluorescence emission of the corresponding zinc(II) porphyrin. Also, FDP 5 film was highly stable to photobleaching, and it was able to produce singlet molecular oxygen in both N , N -dimethylformamide (DMF) and water. Therefore, the porphyrin units embedded in the polymeric matrix of FDP 5 film mainly retain the photochemical properties. Photodynamic inactivation mediated by FDP 5 film was investigated in Staphylococcus aureus and Escherichia coli . When a cell suspension was deposited on the surface, complete eradication of S. aureus and a 99% reduction in E. coli survival were found after 15 and 30 min of irradiation, respectively. Also, FDP 5 film was highly effective to eliminate individual bacteria attached to the surface. In addition, photodynamic inactivation (PDI) sensitized by FDP 5 film produced >99.99% bacterial killing in biofilms formed on the surface after 60 min irradiation. The results indicate that FDP 5 film represents an interesting and versatile photodynamic active material to eradicate bacteria as planktonic cells, individual attached microbes, or biofilms.

A novel chlorin derivative (TPCF 20 -NMe 2 ) has been synthesized as a syn adduct of a pyrrolidine-fused chlorin bearing a C-linked N,N-dimethylaminophenyl residue. The absorption spectrum of TPCF 20 -NMe 2 is essentially identical to that of TPCF 20 in N,N-dimethylformamide, indicating a very weak interaction between the chlorin macrocycle and the amine group in the ground state. However, the fluorescence emission of the chlorin moiety in TPCF 20 -NMe 2 is effectively quenched by the attached amine unit. Moreover, TPCF 20 -NMe 2 is unable to attain a triplet excited state or to photosensitize singlet molecular oxygen. Spectroscopic and redox properties indicate that intramolecular photoinduced electron transfer can take place from the N,N-dimethylaminophenyl group to the chlorin macrocycle. Thus, in an acid medium, protonation of the amino group leads to a considerable increase in the fluorescence emission, triplet excited-state formation, and singlet molecular oxygen production. Photodynamic inactivation of Escherichia coli sensitized by TPCF 20 -NMe 2 is negligible at neutral pH. However, this chlorin becomes highly effective in inactivating E. coli cells under acidic conditions. Therefore, these results indicate that TPCF 20 -NMe 2 is an interesting molecular structure, in which protonation of the amino group can be used as an off/on molecular switch activating red fluorescence emission and photodynamic activity capable of eradicating bacteria., (© 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

4,4-Difluoro-4-bora-3a,4a-diaza-s-indacene (BODIPY) derivatives have been proposed in several potential biomedical applications. BODIPYs absorb strongly in blue-green region with high fluorescence emission, properties that convert them in effective fluorophores in the field of biological labeling. However, BODIPY structures can be conveniently modified by heavy atoms substitution to obtain photosensitizers with applications in photodynamic therapy. Also, external heavy atoms effect can be used to increase the photodynamic activity of these compounds. In recent years, BODIPYs have been proposed as phototherapeutic agents for the photodynamic inactivation of microorganisms. Therefore, BODIPY structures need to be optimized to produce an efficient photocytotoxic activity. In this way, amphiphilic cationic BODIPYs can selectively bind to microbial cells, inducing an effective photokilling of pathogenic microbial cells. This review summarizes the attributes of BODIPY derivatives for applications as antimicrobial photosensitizing agents., (Copyright © 2017 Elsevier Masson SAS. All rights reserved.)

Plants are one of the most important resources for the discovery of new drugs. The potential of natural compounds as new drug leads is clearly illustrated by the discovery and development of many modern medicines. This is an encouraging factor that drives natural products research in the vegetable kingdom. Neocryptolepine is a tetracyclic nitrogen heterocycle isolated from the African climber Cryptolepis sanguinolenta, which is widely used in traditional African medicine in many countries of Central and West Africa. The natural product is one of the representative examples of the small family of indolo[2,3-b]quinoline alkaloids, being endowed of multiple biological activities, including DNA-binding and inhibition of the enzyme topoisomerase II. It is also cytotoxic, antibacterial, antifungal and molluscicidal, also displaying antiprotozoal activity, particularly as antitrypanosomal, antileishmanial, antischistosomal and antiplasmodial. Some of these activities have been related to the product's ability to bind to DNA and to inhibit topoisomerase II; however, the exact mechanisms behind all of the observed bioactivities have not been comprehensively clarified. Major research activities regarding neocryptolepine have been focused into two seemingly opposite fields, related to its cytotoxic and antimalarial properties. Optimization of the natural product as a cytotoxic agent implied improvements in its bioavailability and activity, while the need of non-cytotoxic compounds guided the design and optimization of antimalarial agents. Therefore, the aim of the present article is to systematically review the current knowledge about the diversity of the biological activities related to neocryptolepine, its analogs and derivatives.

The experimental studies were conducted in 2007-2008, 2008-2009 and 2009-2010 crop seasons, in order to know the agro-economic yield of 'Chinês' and "Macaquinho" taro clones, propagated using huge, extra, large, medium, small and tiny cormels. The harvest was done on average on 202 days after planting, in three crop seasons. Based on the joint analysis of variance carried out, it was observed that taro clones showed significant differences in the yield of fresh and dry weight of leaves, cormels, and commercial and non-commercial comels; besides, there were significant differences in yield of a crop season to another and the size of the cuttings induced significant differences in yield. In the conditions that the experiments were conducted, and considering the highest average yield of fresh weight of commercial cormels (28.69 t.ha-1) and highest net income (US $14,741.14) correspondent to the three crop seasons, it is recommended to cultivate 'Macaquinho' clone using small cuttings in propagation.