Search

To study mechanisms involved in fertility, many experimental assays are conducted by incubating spermatozoa in the presence of molecules dissolved in solvents such as ethanol (EtOH) or dimethyl sulfoxide (DMSO). Although a vehicle control group is usually included in such studies, it does not allow to evaluate the intrinsic effect of the solvent on sperm parameters and its potential influence on the outcome of the experiment. In the present study, we incubated human spermatozoa for 4 h in a capacitation medium in the absence or the presence of different concentrations of EtOH and DMSO (0.1, 0.5, 1.0, and 2.0%) to assess the impact of these solvents on sperm motility, vitality, capacitation, and acrosome integrity. The presence of statistically significant relationships between increasing solvent concentrations and the investigated parameters was assessed using linear mixed models. A significant effect was observed with both solvents for total and progressive sperm motilities. We also evaluated the effect of time for these parameters and showed that the influence of the solvents was stable between 0 and 4 h, indicating an almost direct impact of the solvents. While EtOH did not influence sperm vitality and acrosome integrity, a significant effect of increasing DMSO concentrations was observed for these parameters. Finally, regarding capacitation, measured via phosphotyrosine content, although a dose-dependent effect was observed with both solvents, the statistical analysis did not allow to precisely evaluate the intensity of the effect. Based on the results obtained in the present study, and the corresponding linear mixed models, we calculated the concentration of both solvents which would result in a 5% decline in sperm parameters. For EtOH, these concentrations are 0.9, 0.7, and 0.3% for total motility, progressive motility, and capacitation, respectively, while for DMSO they are 1.5, 1.1, >2, 0.3 and >2% for total motility, progressive motility, vitality, capacitation, and acrosome integrity, respectively. We recommend using solvent concentrations below these values to dissolve molecules used to study sperm function in vitro, to limit side effects.

Mature spermatozoa are almost completely devoid of cytoplasm; as such it has long been believed that they do not contain ribosomes and are therefore not capable of synthesising proteins. However, since the 1950s, various studies have shown translational activity within spermatozoa, particularly during their in vitro capacitation. But the type of ribosomes involved (cytoplasmic or mitochondrial) is still debated. Here, we investigate the presence and activity of the two types of ribosomes in mature human spermatozoa. By targeting ribosomal RNAs and proteins, we show that both types of ribosomes are localized in the midpiece as well as in the neck and the base of the head of the spermatozoa. We assessed the impact of cycloheximide (CHX) and chloramphenicol (CP), inhibitors of cytoplasmic and mitochondrial ribosomes, respectively, on different sperm parameters. Neither CHX, nor CP impacted sperm vitality, mitochondrial activity (measured through the ATP content), or capacitation (measured through the content in phosphotyrosines). However, increasing CP concentrations induced a decrease in total and progressive motilities as well as on some kinematic parameters while no effect was observed with CHX. A quantitative proteomic analysis was performed by mass spectrometry in SWATH mode to compare the proteomes of spermatozoa capacitated in the absence or presence of the two ribosome inhibitors. Among the ∼700 proteins identified in the different tested conditions, 3, 3 and 25 proteins presented a modified abundance in the presence of 1 and 2 mg/ml of CHX, and 1 mg/ml of CP, respectively. The observed abundance variations of some CP-down regulated proteins were validated using Multiple-Reaction Monitoring (MRM). Taken together, our results are in favor of an activity of mitochondrial ribosomes. Their inhibition by CP results in a decrease in the abundance of several proteins, at least FUNDC2 and QRICH2, and consequently induces sperm motility deficits., Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2022 Bisconti, Leroy, Gallagher, Senet, Martinet, Arcolia, Wattiez, Kirkman-Brown, Simon and Hennebert.)

Sea stars adhere strongly but temporarily to underwater substrata via the secretion of a blend of proteins, forming an adhesive footprint that they leave on the surface after detachment. Their tube feet enclose a duo-gland adhesive system comprising two types of adhesive cells, contributing different layers of the footprint and de-adhesive cells. In this study, we characterized the catalogue of sea star footprint proteins (Sfps) in the species Asterias rubens to gain insights in their potential function. We identified 16 Sfps and mapped their expression to type 1 and/or type 2 adhesive cells or to de-adhesive cells by double fluorescent in situ hybridization. Based on their cellular expression pattern and their conserved functional domains, we propose that the identified Sfps serve different functions during attachment, with two Sfps coupling to the surface, six providing cohesive strength and the rest forming a binding matrix. Immunolabelling of footprints with antibodies directed against one protein of each category confirmed these roles. A de-adhesive gland cell-specific astacin-like proteinase presumably weakens the bond between the adhesive material and the tube foot surface during detachment. Overall, we provide a model for temporary adhesion in sea stars, including a comprehensive list of the proteins involved.

HSP70s constitute a family of chaperones, some isoforms of which appear to play a role in sperm function. Notably, global proteomic studies analyzing proteins deregulated in asthenozoospermia, a main cause of male infertility characterized by low sperm motility, showed the dysregulation of some HSP70 isoforms. However, to date, no clear trend has been established since the variations in the abundance of HSP70 isoforms differed between studies. The HSPA2 isoform has been reported to play a key role in fertilization, but its dysregulation and possible relocation during capacitation, a maturation process making the spermatozoon capable of fertilizing an oocyte, is debated in the literature. The aim of the present study was to investigate the fate of all sperm HSP70 isoforms during capacitation and in relation to sperm motility. Using Multiple-Reaction Monitoring (MRM) mass spectrometry, we showed that the relative abundance of all detected isoforms was stable between non-capacitated and capacitated spermatozoa. Immunofluorescence using two different antibodies also demonstrated the stability of HSP70 isoform localization during capacitation. We also investigated spermatozoa purified from 20 sperm samples displaying various levels of total and progressive sperm motility. We showed that the abundance of HSP70 isoforms is not correlated to sperm total or progressive motility.

Mutable collagenous tissues (MCTs) from echinoderms (e.g., sea stars, sea urchins) possess the remarkable ability to change their mechanical properties rapidly and reversibly thanks to the release of effector molecules regulating the number of cross-links between collagen fibrils. Among these effector molecules, tensilin has been identified as a stiffening factor in sea cucumber MCTs. Since its discovery and description twenty years ago, tensilin orthologs have been identified in a few sea cucumber species but no novel information about its molecular mode of action has been reported. In this study, using a combination of in silico analyses, we identified the tensilin present in the dermis of Holothuria forskali, Hf-(D)Tensilin. Anti-peptide antibodies showed that this protein is localised in the secretory granules of type 2 juxtaligamental-like cells, a MCT specific cell type. We then used the bacterium E. coli to produce recombinantly Hf-(D)Tensilin and confirmed its stiffening effect on pieces of the dermis and its aggregation effect on collagen fibrils extracted from the sea cucumber dermis. To investigate how tensilin can cross-bridge collagen fibrils, truncated recombinant tensilins were also produced and used in combination with various compounds. Results suggest that two types of interactions contribute to the aggregation effect of tensilin on the fibrils: (1) the N-terminal NTR TIMP like domain of the protein interacts strongly with sulfated GAGs attached to the surface of the collagen fibrils, and (2) the C-terminal part of the protein is involved in its dimerisation/oligomerisation through ionic but possibly also cation-π and hydrophobic interactions., Competing Interests: Declaration of competing interests Authors declare that they have no competing interests., (Copyright © 2022 Elsevier B.V. All rights reserved.)

Male infertility is a common health problem that can be influenced by a host of lifestyle risk factors such as environment, nutrition, smoking, stress, and endocrine disruptors. These effects have been largely demonstrated on sperm parameters (e.g., motility, numeration, vitality, DNA integrity). In addition, several studies showed the deregulation of sperm proteins in relation to some of these factors. This review inventories the literature related to the identification of sperm proteins showing abundance variations in response to the four risk factors for male infertility that are the most investigated in this context: obesity, diabetes, tobacco smoking, and exposure to bisphenol-A (BPA). First, we provide an overview of the techniques used to identify deregulated proteins. Then, we summarise the main results obtained in the different studies and provide a compiled list of deregulated proteins in relation to each risk factor. Gene ontology analysis of these deregulated proteins shows that oxidative stress and immune and inflammatory responses are common mechanisms involved in sperm alterations encountered in relation to the risk factors.

Sea stars can adhere to various underwater substrata using an adhesive secretion of which Sfp1 is a major component. Sfp1 is a multimodular protein composed of four subunits (Sfp1 Alpha, Beta, Delta, and Gamma) displaying different functional domains. We recombinantly produced two fragments of Sfp1 comprising most of its functional domains: the C-terminal part of the Beta subunit (rSfp1 Beta C-term) and the Delta subunit (rSfp1 Delta). Surface plasmon resonance analyses of protein adsorption onto different model surfaces showed that rSfp1 Beta C-term exhibits a significantly higher adsorption than the fibrinogen control on hydrophobic, hydrophilic protein-resistant, and charged self-assembled monolayers, while rSfp1 Delta adsorbed more on negatively charged and on protein-resistant surfaces compared to fibrinogen. Truncated recombinant rSfp1 Beta C-term proteins were produced in order to investigate the role of the different functional domains in the adsorption of this protein. The analysis of their adsorption capacities on glass showed that two mechanisms are involved in rSfp1 Beta C-term adsorption: (1) one mediated by the EGF-like domain and involving Ca 2+ and Mg 2+ ions, and (2) one mediated by the sequence of Sfp1 Beta with no homology with known functional domain in databases, in the presence of Na + , Ca 2+ and Mg 2+ ions., (© 2021. The Author(s), under exclusive licence to Springer Science+Business Media, LLC, part of Springer Nature.)

Many aquatic invertebrates are associated with surfaces, using adhesives to attach to the substratum for locomotion, prey capture, reproduction, building or defence. Their intriguing and sophisticated biological glues have been the focus of study for decades. In all but a couple of specific taxa, however, the precise mechanisms by which the bioadhesives stick to surfaces underwater and (in many cases) harden have proved to be elusive. Since the bulk components are known to be based on proteins in most organisms, the opportunities provided by advancing 'omics technologies have revolutionised bioadhesion research. Time-consuming isolation and analysis of single molecules has been either replaced or augmented by the generation of massive data sets that describe the organism's translated genes and proteins. While these new approaches have provided resources and opportunities that have enabled physiological insights and taxonomic comparisons that were not previously possible, they do not provide the complete picture and continued multi-disciplinarity is essential. This review covers the various ways in which 'omics have contributed to our understanding of adhesion by aquatic invertebrates, with new data to illustrate key points. The associated challenges are highlighted and priorities are suggested for future research., (© 2021 The Authors. Biological Reviews published by John Wiley & Sons Ltd on behalf of Cambridge Philosophical Society.)

Sea stars adhere to various underwater substrata using an efficient protein-based adhesive secretion. The protein Sfp1 is a major component of this secretion. In the natural glue, it is cleaved into four subunits (Sfp1 Alpha, Beta, Delta and Gamma) displaying specific domains which mediate protein-protein or protein-carbohydrate interactions. In this study, we used the bacterium E. coli to produce recombinantly two fragments of Sfp1 comprising most of its functional domains: the C-terminal part of the Beta subunit (rSfp1 Beta C-term) and the Delta subunit (rSfp1 Delta). Using native polyacrylamide gel electrophoresis and size exclusion chromatography, we show that the proteins self-assemble and form oligomers and aggregates in the presence of NaCl. Moreover, they adsorb onto glass and polystyrene upon addition of Na + and/or Ca 2+ ions, forming homogeneous coatings or irregular meshworks, depending on the cation species and concentration. We show that coatings made of each of the two proteins have no cytotoxic effects on HeLa cells and even increase their proliferation. We propose that the Sfp1 recombinant protein coatings are valuable new materials with potential for cell culture or biomedical applications. STATEMENT OF SIGNIFICANCE: Biological adhesives offer impressive performance in their natural context and, therewith, the potential to inspire the development of advanced biomaterials for an increasing variety of applications in medicine or in material sciences. To date, most marine adhesive proteins that have been produced recombinantly in order to develop bio-inspired adhesives are small proteins from mussels and barnacles. Here, we produced two multi-modular proteins based on the sequence of Sfp1, a major protein from sea star adhesive secretion. These two proteins comprise most of Sfp1 functional domains which mediate protein-protein and protein-carbohydrate interactions. We characterized the two recombinant proteins with an emphasis on functional characteristics such as self-assembly, adsorption and cytocompatibility. We discuss their potential as biomaterials., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.)

Maintaining durable adhesion between soft tissues and relatively hard implant materials is one of the most elusive technological difficulties in bionic devices due to contact damage between mechanically mismatched materials. Although there are many examples of coexistence of soft and hard tissues in living organisms, relatively little is known about the mechanisms used to overcome mechanical mismatches occurring at the interface between soft and hard tissues. Among the various creatures possessing mechanically mismatched biological tissues, Atrina pectinata is a good model system where the interface between stiff byssal threads and soft tissues is distributed all over an extended organ. In this study, we found a wide distribution of various types of carbohydrates and lectins at the mechanically mismatched interface of the byssus of Atrina using histological methods and proteomics. Reversible and robust interactions between the carbohydrate and lectins at the interface would play a major role in mitigating the contact damage at the Atrina interface. Based on these results, the adhesion between sugar and lectin would be useful to overcome a wide range of contact damage observed in research studies on bionic devices.

Sea stars use adhesive secretions to attach their numerous tube feet strongly and temporarily to diverse surfaces. After detachment of the tube feet, the adhesive material stays bound to the substrate as so-called 'footprints'. In the common sea star species Asterias rubens, the adhesive material has been studied extensively and the first sea star footprint protein (Sfp1) has been characterized. We identified Sfp1-like sequences in 17 additional sea star species, representing different taxa and tube foot morphologies, and analysed the evolutionary conservation of this protein. In A. rubens, we confirmed the expression of 34 footprint proteins in the tube foot adhesive epidermis, with 22 being exclusively expressed in secretory cells of the adhesive epidermis and 12 showing an additional expression in the stem epidermis. The sequences were used for BLAST searches in seven asteroid transcriptomes providing a first insight in the conservation of footprint proteins among sea stars. Our results highlighted a high conservation of the large proteins making up the structural core of the footprints, whereas smaller, potential surface-binding proteins might be more variable among sea star species. This article is part of the theme issue 'Transdisciplinary approaches to the study of adhesion and adhesives in biological systems'.

Many marine invertebrates use adhesive secretions to attach to underwater surfaces and functional groups borne by their adhesive proteins and carbohydrates, such as catechols and phosphates, play a key role in adhesion. The occurrence of sulfates as recurrent moieties in marine bioadhesives suggests that they could also be involved. However, in most cases, their presence in the adhesive material remains speculative. We investigated the presence of sulfated biopolymers in five marine invertebrates representative of the four types of adhesion encountered in the sea: mussels and tubeworms for permanent adhesion, limpets for transitory adhesion, sea stars for temporary adhesion and sea cucumbers for instantaneous adhesion. The dry adhesive material of mussels, sea stars and sea cucumbers contained about 1% of sulfate. Using anti-sulfotyrosine antibodies and Alcian Blue staining, sulfated proteins and sulfated proteoglycans and/or polysaccharides were identified in the secretory cells and adhesive secretions of all species except the tubeworm. Sulfated proteoglycans appear to play a role only in the non-permanent adhesion of sea stars and limpets in which they could mediate cohesion within the adhesive material. In mussels and sea cucumbers, sulfated biopolymers would rather have an anti-adhesive function, precluding self-adhesion., Competing Interests: Competing interestsThe authors declare no competing or financial interests., (© 2018. Published by The Company of Biologists Ltd.)

Background: Marine biological adhesives are a promising source of inspiration for biomedical and industrial applications. Nevertheless, natural adhesives and especially temporary adhesion systems are mostly unexplored. Sea stars are able to repeatedly attach and detach their hydraulic tube feet. This ability is based on a duo-gland system and, upon detachment, the adhesive material stays behind on the substrate as a 'footprint'. In recent years, characterization of sea star temporary adhesion has been focussed on the forcipulatid species Asterias rubens . Results: We investigated the temporary adhesion system in the distantly related valvatid species Asterina gibbosa . The morphology of tube feet was described using histological sections, transmission-, and scanning electron microscopy. Ultrastructural investigations revealed two adhesive gland cell types that both form electron-dense secretory granules with a more lucid outer rim and one de-adhesive gland cell type with homogenous granules. The footprints comprised a meshwork on top of a thin layer. This topography was consistently observed using various methods like scanning electron microscopy, 3D confocal interference microscopy, atomic force microscopy, and light microscopy with crystal violet staining. Additionally, we tested 24 commercially available lectins and two antibodies for their ability to label the adhesive epidermis and footprints. Out of 15 lectins labelling structures in the area of the duo-gland adhesive system, only one also labelled footprints indicating the presence of glycoconjugates with α-linked mannose in the secreted material. Conclusion: Despite the distant relationship between the two sea star species, the morphology of tube feet and topography of footprints in A. gibbosa shared many features with the previously described findings in A. rubens . These similarities might be due to the adaptation to a benthic life on rocky intertidal areas. Lectin- and immuno-labelling indicated similarities but also some differences in adhesive composition between the two species. Further research on the temporary adhesive of A. gibbosa will allow the identification of conserved motifs in sea star adhesion and might facilitate the development of biomimetic, reversible glues.

Spinochromes are principally known to be involved in sea urchin pigmentation as well as for their potentially interesting pharmacological properties. To assess their biological role in sea urchin physiology, experiments are undertaken on crude extracts from four species and on four isolated spinochromes in order to test their antibacterial, antioxidant, inflammatory and cytotoxic activities. First, the antibacterial assays show that the use of crude extracts as representatives of antibacterial effects of spinochromes are inaccurate. The assays on purified spinochromes showed a decrease in the growth of four strains with an intensity depending on the spinochromes/bacteria system, revealing the participation of spinochromes in the defense system against microorganisms. Secondly, in the 2,2-diphenyl-1-picrylhydrazyl antioxidant assays, spinochromes show an enhanced activity compared to the positive control. This latter observation suggests their involvement in ultraviolet radiation protection. Third, spinochromes present a pro-inflammatory effect on lipopolysaccharide-stimulated macrophages, highlighting their possible implication in the sea urchin immune system. Finally, cytotoxicity assays based on Trypan blue exclusion, performed in view of their possible future applications as drugs, show a weak cytotoxicity of these compounds against human cells. In conclusion, all results confirm the implication of spinochromes in sea urchin defense mechanisms against their external environment and reveal their potential for pharmacological and agronomical industries., Competing Interests: The authors declare no conflict of interest.

Despite their soft body and slow motion, sea cucumbers present a low predation rate, reflecting the presence of efficient defence systems. For instance, members of the family Holothuriidae rely on Cuvierian tubules for their defence. These tubules are normally stored in the posterior coelomic cavity of the animal, but when the sea cucumber is threatened by a potential predator, they are expelled through the cloacal aperture, elongate, become sticky and entangle and immobilise the predator in a matter of seconds. The mechanical properties (extensibility, tensile strength, stiffness and toughness) of quiescent (i.e. in the body cavity) and elongated (i.e. after expulsion) Cuvierian tubules were investigated in the species Holothuria forskali using traction tests. Important mechanical differences were measured between the two types of tubules, reflecting adaptability to their operating mode: to ease elongation, quiescent tubules present a low resistance to extension, while elongated tubules present a high toughness to resist tractions generated by the predator. We demonstrate that a mutable collagenous tissue (MCT) is involved in the functioning of these organs: (1) some mechanical properties of Cuvierian tubules are modified by incubation in a cell-disrupting solution; (2) the connective tissue layer encloses juxtaligamental-like cells, a cell type present in all MCTs; and (3) tensilin, a MCT stiffening protein, was localised inside these cells. Cuvierian tubules thus appear to enclose a new type of MCT which shows irreversible stiffening., Competing Interests: Competing interestsThe authors declare no competing or financial interests., (© 2017. Published by The Company of Biologists Ltd.)

The byssal threads of the fan shell Atrina pectinata are non-living functional materials intimately associated with living tissue, which provide an intriguing paradigm of bionic interface for robust load-bearing device. An interfacial load-bearing protein (A. pectinata foot protein-1, apfp-1) with L-3,4-dihydroxyphenylalanine (DOPA)-containing and mannose-binding domains has been characterized from Atrina's foot. apfp-1 was localized at the interface between stiff byssus and the soft tissue by immunochemical staining and confocal Raman imaging, implying that apfp-1 is an interfacial linker between the byssus and soft tissue, that is, the DOPA-containing domain interacts with itself and other byssal proteins via Fe3(+)-DOPA complexes, and the mannose-binding domain interacts with the soft tissue and cell membranes. Both DOPA- and sugar-mediated bindings are reversible and robust under wet conditions. This work shows the combination of DOPA and sugar chemistry at asymmetric interfaces is unprecedented and highly relevant to bionic interface design for tissue engineering and bionic devices.

Background: Flatworms possess pluripotent stem cells that can give rise to all cell types, which allows them to restore lost body parts after injury or amputation. This makes flatworms excellent model systems for studying regeneration. In this study, we present the adhesive organs of a marine flatworm as a simple model system for organ regeneration. Macrostomum lignano has approximately 130 adhesive organs at the ventral side of its tail plate. One adhesive organ consists of three interacting cells: one adhesive gland cell, one releasing gland cell, and one modified epidermal cell, called an anchor cell. However, no specific markers for these cell types were available to study the regeneration of adhesive organs., Results: We tested 15 commercially available lectins for their ability to label adhesive organs and found one lectin (peanut agglutinin) to be specific to adhesive gland cells. We visualized the morphology of regenerating adhesive organs using lectin- and antibody staining as well as transmission electron microscopy. Our findings indicate that the two gland cells differentiate earlier than the connected anchor cells. Using EdU/lectin staining of partially amputated adhesive organs, we showed that their regeneration can proceed in two ways. First, adhesive gland cell bodies are able to survive partial amputation and reconnect with newly formed anchor cells. Second, adhesive gland cell bodies are cleared away, and the entire adhesive organ is build anew., Conclusion: Our results provide the first insights into adhesive organ regeneration and describe ten new markers for differentiated cells and tissues in M. lignano. The position of adhesive organ cells within the blastema and their chronological differentiation have been shown for the first time. M. lignano can regenerate adhesive organs de novo but also replace individual anchor cells in an injured organ. Our findings contribute to a better understanding of organogenesis in flatworms and enable further molecular investigations of cell-fate decisions during regeneration.

Saponins are secondary metabolites that are abundant and diversified in echinoderms. Mass spectrometry is increasingly used not only to identify saponin congeners within animal extracts but also to decipher the structure/biological activity relationships of these molecules by determining their inter-organ and inter-individual variability. The usual method requires extensive purification procedures to prepare saponin extracts compatible with mass spectrometry analysis. Here, we selected the sea star Asterias rubens as a model animal to prove that direct analysis of saponins can be performed on tissue sections. We also demonstrated that carboxymethyl cellulose can be used as an embedding medium to facilitate the cryosectioning procedure. Matrix-assisted laser desorption/ionization (MALDI) imaging was also revealed to afford interesting data on the distribution of saponin molecules within the tissues. We indeed highlight that saponins are located not only inside the body wall of the animals but also within the mucus layer that probably protects the animal against external aggressions. Graphical Abstract Saponins are the most abundant secondary metabolites in sea stars. They should therefore participate in important biological activities. Here, MALDI imaging is presented as a powerful method to determine the spatial distribution of saponins within the animal tissues. The inhomogeneity of the intra-organ saponin distribution is highlighted, paving the way for future elegant structure/activity relationship investigations.

Sea stars rely on epidermal secretions to cope with their benthic life. Their integument produces a mucus, which represents the first barrier against invaders; and their tube feet produce adhesive secretions to pry open mussels and attach strongly but temporarily to rocks. In this study, we combined high-throughput sequencing of expressed mRNA and mass-spectrometry-based identification of proteins to establish the first proteome of mucous and adhesive secretions from the sea star Asterias rubens. We show that the two secretions differ significantly, the major adhesive proteins being only present in trace amounts in the mucus secretion. Except for 41 proteins which were present in both secretions, a total of 34 and 244 proteins were identified as specific of adhesive secretions and mucus, respectively. We discuss the role of some of these proteins in the adhesion of sea stars as well as in their protection against oxygen reactive species and microorganisms. In addition, 58% of the proteins identified in adhesive secretions did not present significant similarity to other known proteins, revealing a list of potential novel sea star adhesive proteins uncharacterized so far. The panel of proteins identified in this study offers unprecedented opportunities for the development of sea star-inspired biomimetic materials., (Copyright © 2015. Published by Elsevier B.V.)

Adhesive secretions occur in both aquatic and terrestrial animals, in which they perform diverse functions. Biological adhesives can therefore be remarkably complex and involve a large range of components with different functions and interactions. However, being mainly protein based, biological adhesives can be characterized by classical molecular methods. This review compiles experimental strategies that were successfully used to identify, characterize and obtain the full-length sequence of adhesive proteins from nine biological models: echinoderms, barnacles, tubeworms, mussels, sticklebacks, slugs, velvet worms, spiders and ticks. A brief description and practical examples are given for a variety of tools used to study adhesive molecules at different levels from genes to secreted proteins. In most studies, proteins, extracted from secreted materials or from adhesive organs, are analysed for the presence of post-translational modifications and submitted to peptide sequencing. The peptide sequences are then used directly for a BLAST search in genomic or transcriptomic databases, or to design degenerate primers to perform RT-PCR, both allowing the recovery of the sequence of the cDNA coding for the investigated protein. These sequences can then be used for functional validation and recombinant production. In recent years, the dual proteomic and transcriptomic approach has emerged as the best way leading to the identification of novel adhesive proteins and retrieval of their complete sequences.

The peculiar Cuvierian tubules of sea cucumbers function as a defense mechanism. They thwart attacks by creating a sticky network composed of elongated tubules within which the potential predator is entangled in a matter of seconds and thus immobilized. Cuvierian tubules are typical instantaneous adhesive organs in which tissue integrity is destroyed during the release of the adhesive secretion. However, very little information is available about this adhesion process. The adhesive epithelium-the mesothelium-and the sticky material it produces were studied in the species Holothuria forskali using different microscopy techniques (light microscopy, transmission electron microscopy, scanning electron microscopy, and atomic force microscopy). The mesothelium consists of two cell types-peritoneocytes and granular cells-organized in superimposed layers. In tubules before expulsion, peritoneocytes form an outer protective cell layer preventing adhesion when not needed. After expulsion, the elongation process removes this protective layer and allows granular cells to unfold and to become exposed at the tubule surface. At this stage, Cuvierian tubules are still not sticky. Upon contact with a surface, however, granular cells release their granule contents. Once released, this material changes in aspect, swells, and spreads readily on any type of substrate where it forms a thin homogeneous layer. After tubule peeling, this layer remains on the surface but is often contaminated with collagen fibers. Atomic force microscopy demonstrated the adhesive layer to be made up of globular nanostructures measuring about 70 nm in diameter and to be more adhesive than the collagen fibers left on it. The morphological organization of Cuvierian tubules therefore allows contact-dependent deposition of an adhesive material presenting a high affinity for various surfaces. It is certainly an adaptive advantage for a defense organ to be able to entangle different types of predators.

Sea stars adhere firmly but temporarily to various substrata as a result of underwater efficient adhesive secretions released by their tube feet. Previous studies showed that this material is mainly made up of proteins, which play a key role in its adhesiveness and cohesiveness. Recently, we solubilized the majority of these proteins and obtained 43 de novo-generated peptide sequences by tandem MS. Here, one of these sequences served to recover the full-length sequence of Sea star footprint protein 1 (Sfp1), by RT-PCR and tube foot transcriptome analysis. Sfp1, a large protein of 3,853 aa, is the second most abundant constituent of the secreted adhesive. By using MS and Western blot analyses, we showed that Sfp1 is translated from a single mRNA and then cleaved into four subunits linked together by disulphide bridges in tube foot adhesive cells. The four subunits display specific protein-, carbohydrate-, and metal-binding domains. Immunohistochemistry and immunocytochemistry located Sfp1 in granules stockpiled by one of the two types of adhesive cells responsible for the secretion of the adhesive material. We also demonstrated that Sfp1 makes up the structural scaffold of the adhesive footprint that remains on the substratum after tube foot detachment. Taken together, the results suggest that Sfp1 is a major structural protein involved in footprint cohesion and possibly in adhesive interactions with the tube foot surface. In recombinant form, it could be used for the design of novel sea star-inspired biomaterials.

The improvement of the (bio)adhesive properties of elastomeric polydimethylsiloxane (PDMS) coatings is reported. This is achieved by a surface modification consisting of the incorporation of block copolymers containing a PDMS block and a poly(2-(dimethylamino)ethyl methacrylate) (PDMAEMA) block in a PDMS matrix, followed by matrix cross-linking and immersion of the obtained materials in water. Contact angle measurements (CA), X-ray photoelectron spectroscopy (XPS), and atomic force microscopy (AFM) showed the presence of the PDMAEMA block at the surface, drastic morphology changes, and improved adhesion properties after immersion in water. Finally, underwater bioadhesion tests show that mussels adhere only to block copolymer-filled coatings and after immersion in water, i.e., when the PDMAEMA blocks have been brought to the coating surface. These observations highlight the significant role of hydrophilic groups in the surface modification of silicone coatings.

Sea stars are able to make firm but temporary attachments to various substrata by secretions released by their tube feet. After tube foot detachment, the adhesive secretions remain on the substratum as a footprint. Proteins presumably play a key role in sea star adhesion, as evidenced by the removal of footprints from surfaces after a treatment with trypsin. However, until now, characterisation was hampered by their high insolubility. In this study, a non-hydrolytic method was used to render most of the proteins constituting the adhesive footprints soluble. After analysis by SDS-PAGE, the proteins separated into about 25 bands, which ranged from 25 to 450 kDa in apparent molecular weight. Using mass spectrometry and a homology-database search, it was shown that several of the proteins are known intracellular proteins, presumably resulting from contamination of footprint material with tube foot epidermal cells. However, 11 protein bands, comprising the most abundant proteins, were not identified and might correspond to novel adhesive proteins. They were named 'Sea star footprint proteins' (Sfps). Tandem mass spectrometry analysis of the protein bands yielded 43 de novo-generated peptide sequences. Most of them were shared by several, if not all, Sfps. Polyclonal antibodies were raised against one of the peptides (HEASGEYYR from Sfp-115) and were used in immunoblotting. They specifically labelled Sfp-115 and other bands with lower apparent molecular weights. The different results suggest that all Sfps might belong to a single family of related proteins sharing similar motifs or, alternatively, they are the products of polymerization and/or degradation processes.

In sea stars, adhesion takes place at the level of a multitude of small appendages, the tube feet. It involves the secretion of an adhesive material which, after tube foot detachment, remains on the substratum as a footprint. It was previously reported that the two main organic components of this material are proteins and carbohydrates. The carbohydrate moiety of the adhesive secretion of Asterias rubens was investigated using a set of 16 lectins which were used on sections through tube feet, on footprints, and on the proteins extracted from these footprints. After gel electrophoresis, these proteins separate into eight protein bands which were named sea star footprint proteins (Sfps). Eleven lectins label the tube foot epidermis at the level of the adhesive cells, four react with footprints, and eight with two of the extracted footprint proteins, which are therefore classified as glycoproteins. Sfp-290 appears to bear mostly N-linked oligosaccharides and Sfp-210 principally O-linked oligosaccharides. The outer chains of both glycoproteins enclose galactose, N-acetylgalactosamine, fucose, and sialic acid residues. Another part of the carbohydrate fraction of the footprints would be in the form of larger molecules, such as sialylated proteoglycans. These two types of glycoconjugates are presumably key components of the sea star temporary adhesive providing both cohesive and adhesive contributions through electrostatic interactions by the polar and hydrogen-bonding functional groups of their glycan chains.

Sea star tube feet consist of an enlarged and flattened distal extremity (the disc), which makes contact with the substratum, and a proximal contractile cylinder (the stem), which acts as a tether. In this study, the different forces brought into play during tube foot functioning were investigated in two related species. The tube feet of Asterias rubens and Marthasterias glacialis attach to glass with a similar mean tenacity (0.24 and 0.43 MPa, respectively), corresponding to an estimated maximal attachment force of 0.15 and 0.35 N. The contraction force of their retractor muscle averages 0.017 N. The variation of the retractor muscle contraction with its extension ratio follows a typical bell-shaped length-tension curve in which a maximal contraction of approximately 0.04 N is obtained for an extension ratio of approximately 2.3 in both sea star species. The tensile strength of the tube foot stem was investigated considering the two tissues that could assume a load-bearing function, i.e. the retractor muscle and the connective tissue. The latter is a mutable collagenous tissue presenting a fivefold difference in tensile strength between its soft and stiff state. In our experiments, stiffening was induced by disrupting cell membranes or by modifying the ionic composition of the bathing solution. Finally, the force needed to break the tube foot retractor muscle was found to account for 18-25% of the tube foot total breaking force, showing that, although the connective tissue is the tissue layer that supports most of the load exerted on the stem, the contribution of the retractor muscle cannot be neglected in sea stars. All these forces appear well-balanced for proper functioning of the tube feet during the activities of the sea star. They are discussed in the context of two essential activities: the opening of bivalve shells and the maintenance of position in exposed habitats.

To attach to underwater surfaces, sea stars rely on adhesive secretions produced by specialised organs, the tube feet. Adhesion is temporary and tube feet can also voluntarily become detached. The adhesive material is produced by two types of adhesive secretory cells located in the epidermis of the tube foot disc, and is deposited between the disc surface and the substratum. After detachment, this material remains on the substratum as a footprint. Using LM, SEM, and AFM, we described the fine structure of footprints deposited on various substrata by individuals of Asterias rubens. Ultrastructure of the adhesive layer of attached tube feet was also investigated using TEM. Whatever the method used, the adhesive material appeared as made up of globular nanostructures forming a meshwork deposited on a thin homogeneous film. This appearance did not differ according to whether the footprints were fixed or not, and whether they were observed hydrated or dry. TEM observations suggest that type 2 adhesive cells would be responsible for the release of the material constituting the homogeneous film whereas type 1 adhesive cells would produce the material forming the meshwork. This reticulated pattern would originate from the arrangement of the adhesive cell secretory pores on the disc surface.