Search

Although gypsum-based building materials exhibit many positive characteristics, solutions are still being searched for to reduce the use of gypsum or improve the physico-mechanical properties of board materials. In this study, an attempt was made to produce gypsum boards with hemp fibers. Although hemp fibers can be a specific reinforcement for gypsum-based board materials, they negatively affect the gypsum setting process due to their hygroscopic characteristics. Fibers impregnated with derivatives based on polyvinyl acetate, styrene–acrylic copolymer and pMDI (polymeric diphenylmethane diisocyanate) were used in this study. Gypsum–fiber boards produced with impregnated fibers showed approximately 30% higher mechanical properties as determined by the 3-point bending test. The positive effect of the impregnates on the hemp fibers was confirmed by FTIR (Fourier-transform infrared spectroscopy) and TG/DTA (thermogravimetric analysis/thermal gravimetric analysis) analysis. [ABSTRACT FROM AUTHOR]

The pursuit of lightweight, environmentally friendly composite structures in transportation is crucial for minimizing ecological footprints and promoting energy-efficient manufacturing techniques. This study presents a novel approach by replacing traditional long glass fiber reinforced homopolymer polypropylene (homoPP) compounds with short hemp fiber reinforced homoPP, incorporating graphene nanoplatelets (GNP) derived from recovered carbon black via waste tire pyrolysis, resulting in a remarkable 15% weight reduction. With new compound formulation by adjusting the amounts of compatibilizer and GNP, injection moulding process was integrated with overmoulding process by using bio-based UD prepregs to enhance the adhesion of injected part and interfacial interaction by decreasing the stress concentrations in the structure. This novel hybrid composite design having 40 wt% hemp fiber, 1.0 wt% GNP and 2.7 wt% compatibilizer provided to improve flexural modulus and strength by 169% and 67.9%, respectively, compared to neat homoPP. The overmolding process employed bio-based natural fibers reinforced UD tapes as inserts, leading to an impressive enhancement of 211% in tensile modulus and 93.6% in strength, further surpassing the performance of neat homoPP. This work not only achieves the conversion of conventional composite structures into recyclable, sustainable thermoplastic composites but also introduces multi-scale reinforcements with customizable functionality, demonstrating a significant step forward in the development of environmentally conscious materials and manufacturing methods by adopting Life-Cycle Assessment (LCA) methodology regarding the sustainability of the newly developed composites. [ABSTRACT FROM AUTHOR]

This paper presents the results of the research on the effects of ionizing radiation on the properties of a composite material consisting of polypropylene (PP) and hemp fibers (HFs). The radiolysis effects were investigated for the composites having HF contents in the amounts of 10, 20, 30, and 40% by weight, as well as for pure PP. Particular attention was paid to the protective effects the aromatic compounds contained in the HF had on the radiolysis of PP/HF composites. This phenomenon may explain the deviations that the irradiated composites displayed upon the addition of HFs and their dependency on the HF content. Both the granules and the standardized composite specimens were subjected to radiation treatment. The gas chromatography (GC) technique was employed to determine the yield of radiolytically generated hydrogen (GH2) and absorbed oxygen (GO2). The oxidation phenomenon was studied during irradiation, 24 h after irradiation, and after a 40-day aging period at room temperature. Changes in the melt flow rate (MFR) and the mechanical properties were also determined. It was described how the radiation treatment of the investigated composites accelerates their degradation. It was found that this effect applies to both HF and PP. It was also demonstrated that PP not only does not enhance the resistance of HF to oxidation but, on the contrary, accelerates the processes of their post-radiation degradation. It was further observed that the phenomenon of postradiation degradation can be controlled by changing the PP content in the composite, as well as the amount of aromatic compounds present in the HF. The amount of the absorbed dose allows us to control the degradation time of the PP/HF composites. This applies in particular to the chain oxidation of the PP matrix triggered by the ionizing radiation. It was also found that composites based on PP and natural fibers susceptible to radiation degradation may have significant implications for the use of easily degradable polymer materials in the environment.

Copyright of China Pulp & Paper is the property of China Pulp & Paper Magazines Publisher and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Reinforcement of soils with fibers generally increases the mechanical properties of the fiber-reinforced soil (FRS) system. However, published literature is limited to investigating the undrained response of clay and synthetic fibers, with few studies targeting natural clay and natural fibers under drained conditions. There is a need to study the response of fiber-reinforced clay systems under drained conditions to assess long-term stability. This paper investigated the drained shear strength and durability of clays reinforced with natural hemp fibers using isotropically consolidated drained triaxial tests, in which the fiber content, confining pressure, and compaction water content were varied. Results showed that the incorporation of hemp fibers improved the deviatoric stress at failure by up to 60%, which increased the drained cohesion and friction angle of the FRS by 7–10 kPa and 3–7°, respectively. The increase in cohesive intercept was not affected by the compaction water content, while the increase in friction angle was pronounced in specimens compacted at optimum water content (w = 18%). Durability tests showed that the improvement in strength due to hemp fibers diminishes after 3 weeks of curing prior to drained testing, indicating the dramatic negative impact of degradation of natural fibers on the mechanical performance of fiber-reinforced clay and the need for industrial treatment of the fiber. [ABSTRACT FROM AUTHOR]

Hemp fibers derived from Cannabis sativa L. have experienced a resurgence in popularity over the past few decades, establishing themselves as one of the most sought-after fibers. This article delves into the intricacies of the hemp production chain, offering a comprehensive understanding from field to fiber. Key aspects covered include the botany of hemp, cultivation requirements, the impact of various factors on plant growth, the harvesting process, different methods of fiber extraction, fibers properties, and suitable spinning processes. Recent studies of hemp's Life Cycle Assessment are explored, shedding light on how it compares to other sustainable crops and providing insights into the true sustainability of hemp, substantiated by numerical data. The article also addresses challenges encountered throughout the hemp production chain and speculates on future directions that may unfold in the coming years. The overall goal of this study is to provide a knowledge base encompassing every facet of hemp fiber production. It elucidates how different technological approaches and the technical properties of fibers play pivotal roles in determining their ultimate applications. By offering a comprehensive overview, this article contributes to the broader understanding of hemp as a valuable and sustainable resource in the textile industry. [ABSTRACT FROM AUTHOR]

Hemp fibers derived from Cannabis sativa L. have experienced a resurgence in popularity over the past few decades, establishing themselves as one of the most sought-after fibers. This article delves into the intricacies of the hemp production chain, offering a comprehensive understanding from field to fiber. Key aspects covered include the botany of hemp, cultivation requirements, the impact of various factors on plant growth, the harvesting process, different methods of fiber extraction, fibers properties, and suitable spinning processes. Recent studies of hemp’s Life Cycle Assessment are explored, shedding light on how it compares to other sustainable crops and providing insights into the true sustainability of hemp, substantiated by numerical data. The article also addresses challenges encountered throughout the hemp production chain and speculates on future directions that may unfold in the coming years. The overall goal of this study is to provide a knowledge base encompassing every facet of hemp fiber production. It elucidates how different technological approaches and the technical properties of fibers play pivotal roles in determining their ultimate applications. By offering a comprehensive overview, this article contributes to the broader understanding of hemp as a valuable and sustainable resource in the textile industry.

Poly(lactic acid) (PLA) is a compostable aliphatic polymer with enhanced strength and toughness, and it is a promising material for packaging products. Polymer blending is a financially feasible and easy way to upgrade its properties, such as its slow degradation and crystallization rates and its modest elongation, and thus, make it more adaptable. Furthermore, the use of natural fibers as fillers can reinforce the biobased character of the final composite materials and enhance their antioxidant activity values, a crucial property of polymers that are addressed for active packaging. Herein, the influence of the addition of hemp fibers (HF) on the features of poly(lactic acid)/poly(propylene adipate) blends containing 85/15 w/w PLA/PPAd, was investigated. The utilization of a poly(lactic acid)-co-poly(propylene adipate) block copolymer (cop) as a compatibilizer was also examined. The thermal, morphological and mechanical assets of the composite materials were evaluated with the implementation of multiple techniques. The addition of HF enhanced the hydrophobicity and biodegradation of the composites, render them as candidates for several applications. Furthermore, the introduction of the compatibilizer successfully increases the adhesion between the polymeric matrices and the HF, resulting in enhanced properties.

ABSTRACTThe main purpose of the article is to present the potential use of hemp fibers as reinforcement in composites, but from a design perspective. The authors ask whether sustainable nonwovens, produced based on natural fibers, have the potential as a material for designers and artists and not only as a technical textile. Technical production of nonwovens like carding, punching and laser cutting was used to achieve not just functional, but also aesthetic quality of the samples. The possibilities of utilizing natural materials for design endeavors were presented. The production process of these items was described, along with the main design concept. Research was carried out through a series of interdisciplinary activities, using the knowledge and tools typical for textile and materials engineering, as well as the methodology and strategies derived from the fields of visual art and design. It has been shown that during the development of a new sustainable material significant attention should be paid to design aspects, so it shows its full potential, as not just being eco-friendly, but also functional and aesthetic. While technical hemp and PLA composites have been produced and studied before, the design aspect is unique in the current study.

The exploitation and utilization of natural fibers still face many challenges due to their high crystallinity and extensive hydrogen bond network. Therefore, sustainable and effective modification strategies are currently essential. In this work, we investigate the processing and mechanical performances of natural fibers modified by combining sodium periodate oxidation and subsequent Schiff base reaction. Steam‐exploded hemp fibers (HFs) were firstly oxidized with sodium periodate, and subsequently grafted with 1,10‐diaminodecane. A decrease in the glass transition temperature of oxidized‐aminated HFs (OAHFs) from 225 to 150°C was achieved as the dosage of periodate increased. Admirable mechanical properties were achieved despite a lower dosage of periodate due to melt bonding and chemical cross‐linking between the fibers during heat processing. Particularly, dynamic compression molding was applied to heat processes and effectively improved the melt bonding and the chemical crosslinking, which increased flexural strength from 58.2 to 69.9 MPa. This strategy was moderate and low cost. The resulted material has good processing performance and excellent mechanical properties, which have large industrial application prospects and potential in the field of biodegradable environment‐friendly materials. [ABSTRACT FROM AUTHOR]

Sticky rice–lime mortar, a representative ancient binding material widely employed in construction applications across Asian countries, has been a subject of substantial academic research and development efforts for its restoration. However, conventional sticky rice–lime mortar is characterized by suboptimal strength and limited toughness, necessitating further enhancements to expand its practical utility. This study presents the formulation of a high-performance sticky rice–lime mortar by incorporating metakaolin and hemp fibers. A comprehensive investigation of various parameters influencing the compressive and flexural properties of the resulting composite was undertaken, encompassing the volume content of hemp fibers, the mass content of sticky rice paste, and the mass content of metakaolin. The experimental outcomes demonstrate the efficacy of metakaolin and sticky rice paste in significantly elevating the compressive strength of the sticky rice–lime composite. Notably, the presented sticky rice–lime mortar attains a remarkable compressive strength of up to 3.5 MPa, exceeding that of conventional sticky rice–lime mortar by more than threefold. Moreover, the introduction of hemp fibers effectively enhances the flexural strength of the sticky rice–lime composite through fiber bridging mechanisms. The research culminates by proposing a relationship equation, derived from the empirical data, to characterize the compressive and flexural strength of the high-performance sticky rice–lime composite. Overall, these findings emphasize the importance of optimizing sticky rice–lime mortar through the integration of advanced constituents, thus highlighting its potential as a durable and versatile binding material for historical preservation and sustainable construction practices within Asian contexts and beyond. [ABSTRACT FROM AUTHOR]

The article presents the exploration of flax and hemp fibers' surface free energy depending on the chemical composition of the fiber, which is closely related to the plant variety and the method of extracting the fiber. For this purpose, tests of the surface free energy (SFE), evaluation of the percentage content of individual fiber components and FTIR analyses were conducted. The research was carried out with the use of fibrous materials prepared in three different ways: 1. To analyze the effect of subsequent stages of flax fibers refining process on chemical composition and SFE, 2. to explore the dependence of fiber SFE on hemp variety, the water-retting hemp fibers were used, 3. To evaluate the influence of the retting method of hemp fibers BIAŁOBRZESKIE variety on SFE, the fibers extracted with the use of dew and water retting were used as the research material. The study confirmed that the content of individual components in the fiber influenced its sorption capacity and therefore determined its hydrophilic properties. The values of Pearson's linear correlation coefficients determined in the statistical analysis proved that the surface free energy was strongly correlated with the content of individual components in the fibers. Understanding the wettability characteristics of bast fibers will allow modeling the properties of products made of these fibers and designing surface modification processes in order to obtain specific functionality of textile products, depending on their intended utilization. [ABSTRACT FROM AUTHOR]

There is a substantial need for removing the contaminants from aqueous waste stream using affordable, stable, and active adsorbents, such as heteroatom-doped carbonaceous materials. Heteroatom such as N-doped carbonaceous materials greatly improve the performance of carbon materials by enhancing their conductivity, basicity, oxidation stability, catalytic activity and adsorption capacity. In this study, hemp fibers (HFs) and N-aminoguanidine were utilized as carbon and nitrogen precursors to synthesize N-functionalized mesoporous carbon materials (N-HFCs) via simultaneous activation and carbonization with ZnCl2. Higher BET surface area with a distinctive mesoporous structure and the covalent bond between N and C was developed in the prepared carbon, making N-HFCs suitable for adsorbing naphthenic acids (2-naphthoic acid and benzoic acid) from aqueous waste streams. Developed covalent bond helps to prevent the leaching of carbonaceous materials during adsorption study. The results showed that N-HFC-2 (ZnCl2: N-HFs ratio = 2:1) exhibited a higher removal efficiency of naphthenic acids (2-naphthoic acid and benzoic acid) compared to nonfunctionalized porous carbon (HFC). Adsorption of 2-naphthoic acid and benzoic acid on the adsorbents followed the typical monolayer type of Langmuir adsorption model. The maximum adsorption capacity of HFC after 48 h was evaluated as 70 and 27 mg/g for 2-naphthoic acid and benzoic acid. Likewise, the maximum adsorption capacity of N-HFC-2 for 2-naphthoic acid and benzoic acid was found to be 71 and 33 mg/g. In the adsorption kinetic experiment, adsorption of 2-naphthoic acid and benzoic acid reached equilibrium within 1 h using both the adsorbents (N-HFC-2 and HFC). Adsorption kinetics were analyzed using pseudo-first-order and pseudo-second-order kinetic models and were found to follow a pseudo-second-order kinetic model. Although changing pH from 4.4 to 8.5 did not have any significant effect on the removal efficiency of 2-napthoic acid using HFC and N-HFC-2, the removal efficiency of benzoic acid was decreased from 94 to 60 % using HFC and increased from 98 to 100 % using N-HFC-2. Comparative evaluations demonstrated that the mesoporous carbonaceous materials derived from HFs are an attractive adsorbent for removal of such contaminants from contaminated aqueous streams.

Hemp fibers are promising biomaterials that have many advantages, such as biodegradability, low production costs, and rapid growth. They can be used as alternatives to other cellulosic fibers that have higher environmental impacts. However, to use hemp fibers effectively, they need to be separated from the lignin in the hemp biomass. This process is called delignification, and it is usually done by using harsh chemicals that are harmful to the environment and human health. In this work, we used a new and green solvent, called deep eutectic solvent-like mixtures, to delignify hemp biomass. Deep eutectic solvent-like mixtures are made from choline chloride and lactic acid, which are cheap, safe, and biodegradable. We tested different combinations of temperature (80–160 °C), time (60–240 min.), and solvent amount (1:10–1:60) to find the best conditions for delignification. We measured the Kappa number, which indicates how much lignin is left in the fibers, and the efficiency of delignification, which indicates how much lignin is removed. The Kappa number of delignified hemp fibers ranged from 10.7 (144 °C, 204 min, 1:30) to 21.8 (160 °C, 150 min, 1:17). The results showed that the optimal conditions to obtain the smallest Kappa number representing 6.6 are the boundary conditions of 160 °C, 240 min, and a ratio of 1:60. This method is more sustainable and environmentally friendly than the conventional methods, and it can help achieve the goal of sustainable development for mankind.

Although gypsum-based building materials exhibit many positive characteristics, solutions are still being searched for to reduce the use of gypsum or improve the physico-mechanical properties of board materials. In this study, an attempt was made to produce gypsum boards with hemp fibers. Although hemp fibers can be a specific reinforcement for gypsum-based board materials, they negatively affect the gypsum setting process due to their hygroscopic characteristics. Fibers impregnated with derivatives based on polyvinyl acetate, styrene–acrylic copolymer and pMDI (polymeric diphenylmethane diisocyanate) were used in this study. Gypsum–fiber boards produced with impregnated fibers showed approximately 30% higher mechanical properties as determined by the 3-point bending test. The positive effect of the impregnates on the hemp fibers was confirmed by FTIR (Fourier-transform infrared spectroscopy) and TG/DTA (thermogravimetric analysis/thermal gravimetric analysis) analysis.

NAO brake friction materials with 4%, 5%, and 6% (w/v) sodium hydroxide treated hemp fiber reinforcement having 25% wt. fiber loading and fixed percentage of phenol formaldehyde resin content (20% wt.) along with other fillers have been studied and reported by the authors earlier. However, the effect of variations in the resin content on the tribological performance has been studied and reported in the present paper. Five variants were prepared with varying percentages of phenol formaldehyde resin from 12% wt. to 22% wt. with incremental steps of 2% wt, along with the optimum of 6% (w/v) sodium hydroxide treated hemp fibers and other fillers. The prepared test variants' tribological characterization was done using Taguchi's L25 orthogonal array on a pin-on-disc experimental setup, as per ASTM G99, at room temperature and compared with the best of the earlier studied friction composite. Fade and recovery tests of the best of the earlier studied and present ones were performed on a chase tribology tester per SAE J661 standards. The results revealed moderate coefficient of friction of 0.4496, lower wear rate of 0.57 gm, and better fade recovery for the HF25P20 variant compared to its counterparts studied here. [ABSTRACT FROM AUTHOR]

The comfort of walking depends heavily on the shoes used. Consequently, the midsole of shoes is designed in such a way that it can dampen force peaks during walking. This significantly increases the overall wellness during walking. Therefore, the midsole usually consists of rubber-like polymers, such as polyurethane and ethylene-vinyl acetate copolymer. Furthermore, the manufacturing process of these polymers results in a foam-like structure. This further enhances the damping behavior of the material. Nevertheless, it would be desirable to find a cheap and sustainable method to enhance the damping behavior of the shoe midsole. The purpose of this work is to see if hemp fibers, which are part of the polymer matrix material, could improve the stiffness without losing the damping behavior. The mechanical properties of such prepared fiber-reinforced composites were characterized by quasi-static tensile testing and dynamic mechanical analysis. The mechanical properties were examined in relation to the fiber type, weight fraction, and type of polyurethane used. Furthermore, the investigation of the embedding of these fibers in the polymer matrix was conducted through the utilization of optical and electron microscopy. [ABSTRACT FROM AUTHOR]

The demand for eco-friendly packaging materials has urged researchers to look for alternatives to petroleum-based polymers. In this regard, paper-based products have turned out to be a promising choice; however, their weak resistance to water has limited their application. The use of various additives to enhance paper's moisture resistance is a common practice. However, considering the growing global agenda for sustainable development, the search for new bio-based paper additives has become increasingly important. This study investigated the potential synergistic impact of the addition of nanofibrillated cellulose (NFC) and chitosan additives (CHIT) to different fiber combinations to improve paper's properties, in particular, their wet strength. The efficacy of the additive application order was examined and was found to be crucial in achieving the desired outcomes. The results showed that incorporating CHIT after NFC enhanced the paper's tensile and burst indicators, as well as the paper stretch in the dry state, by 35–70%, 35–55%, and 20–35%, respectively. In addition, the tensile index and stretch in the wet state improved 9–13 times and 2.5–5.5 times over, respectively. The air permeability decreased 2.5–12 times over. These findings demonstrate that the sequential addition of the NFC and CHIT additives yield a greater enhancement of paper's properties than using each additive separately. [ABSTRACT FROM AUTHOR]

As a sustainable concrete material, hemp and recycled aggregate concrete (HRAC) is produced by partial replacement of natural coarse aggregates (NCA) with recycled concrete coarse aggregates (RCA) and industrial hemp fibers. The objective of the reported research was to investigate the structural performance of reinforced concrete beams prepared with HRAC and designed to fail in flexure, shear, or bond splitting modes of failure, and to compare that performance with companion control beams cast with conventional concrete. The significance stems for the fact that no previous research is reported on mixtures using such a combination of hemp fibers and RCA. Test results indicated that HRAC beams with 0.75% volumetric percentage hemp fibers and 50% RCA replacement had comparable peak load capacities to the control beams with no RCA and no fibers, with ±4% difference for all tested modes of failure. Additionally, the fracture energy of the HRAC beam was higher than the control beam by 3.6%, 17.9%, and 14.4% for the flexure, shear, and bond modes of failure, respectively. Moreover, a life cycle analysis (LCA) was considered to compare HRAC mix with conventional concrete mix in terms of the environmental aspects. LCA results indicated that HRAC is a sustainable concrete, specifically with respect to structural performance and lower environmental impact. [ABSTRACT FROM AUTHOR]

A significant increase in the consumption of recycled fiber products has been observed worldwide, and the industry is forced to solve the challenges of recycled fiber quality and add strength agents and/or virgin fibers to reach sufficient properties. In order to investigate whether the mechanical and air permeability properties of waste fiber (WF) material can be significantly improved by adding wood kraft fibers (KF), hemp soda fibers (HF), and ammonium persulfate oxidated cellulose nanofibrils (CNF), different fiber blends were prepared and tested. Results revealed the excellence of hemp fibers over wood fibers regarding the improvement of WF products. The results of WF after the addition of 10% mixed fibers (KF + HF) were higher than the results of a 50% KF addition. The impact of CNF depended on fiber composition and properties. A formula for modeling the CNF impact on different fiber compositions was proposed. Obtained fiber material samples showed suitability for home composting, thus contributing to the goals of the European Green Deal regarding reducing landfill waste and the development of cleaner products. [ABSTRACT FROM AUTHOR]

NAO brake friction materials with 4%, 5%, and 6% (w/v) sodium hydroxide treated hemp fiber reinforcement having 25% wt. fiber loading and fixed percentage of phenol formaldehyde resin content (20% wt.) along with other fillers have been studied and reported by the authors earlier. However, the effect of variations in the resin content on the tribological performance has been studied and reported in the present paper. Five variants were prepared with varying percentages of phenol formaldehyde resin from 12% wt. to 22% wt. with incremental steps of 2% wt, along with the optimum of 6% (w/v) sodium hydroxide treated hemp fibers and other fillers. The prepared test variants’ tribological characterization was done using Taguchi’s L25 orthogonal array on a pin-on-disc experimental setup, as per ASTM G99, at room temperature and compared with the best of the earlier studied friction composite. Fade and recovery tests of the best of the earlier studied and present ones were performed on a chase tribology tester per SAE J661 standards. The results revealed moderate coefficient of friction of 0.4496, lower wear rate of 0.57 gm, and better fade recovery for the HF25P20 variant compared to its counterparts studied here.

Fully biobased composite materials were prepared from poly(ethylene succinate) (PESu) and hemp fibers isolated from hemp agricultural wastes. Different amounts of hemp fibers were incorporated in PESu from 10% to 75%. Additionally, the effect of Joncryl ADR® 4400 (JC) as a compatibilizer was investigated. The chemical structure, thermal behavior, crystallization, mechanical properties, antioxidant activity, hydrophilicity and soil degradation of the materials were studied. Mechanical properties are initially increased up to 20–50% HF but decrease with further addition of hemp fibers. On the other hand, antioxidant activity and soil degradation increase proportionally with the HF content. Quite unexpectedly, hydrophobicity increases with the incorporation of HF probably due to the incorporation of non-cellulosic hydrophobic compounds in the polymeric matrix. Last but not least, JC effectively contributes to a higher fiber/polymeric matrix adhesion, resulting in improved properties.

This paper discusses a new method for decorticating bast fiber stalks, particularly hemp and flax, through a mastication process without damaging the fiber for use in biocomposites. Conventional automated decortication methods provide high stalk processing throughput, but they significantly damage the bast fibers and adversely affect their performance in biocomposite applications. Initial experiments with industrial hemp using a matched set of tools indicate that indexing the stalk by, at most, half a tooling period for each mastication cycle maximizes both the crushed stalk flexing action and dehurding efficiency. Further process insight was gained through simple stalk-crushing experiments (force vs. deflection) between matching teeth with no indexing, where force spikes correspond to initial collapse of the stalk cross section and initial hurd bending fracture along the stalk length. A more extensive experimental design with stiffer tooling reveals that hurding efficiency is maximized by adding spaces in the bottom die for hurd to fall through, using the smallest practical indexing distance of less than half a tooling period, and using as many teeth as possible. However, shorter indexing and more teeth also decrease the throughput rate and complicate stalk handling. Future work for optimizing and commercializing the process is suggested. [ABSTRACT FROM AUTHOR]

This article investigates the effects of combining a novel protic ionic liquid-based fire retardant (FR) with alkalized hemp fiber. A pivotal importance of this study refers to the hydrophilic properties and limits regarding poor thermal resistance of green composites where standard guidelines for fire risks are crucial. Although it is well-studied that alkalization is essential for green composite's moisture and mechanical durability, research on the flammability of such a combined treatment for natural fiber-reinforced biopolymer composites is lacking. The alkaline treatment used in the current study follows a process already studied as optimal, particularly for the selected hemp fiber. The fire performance was examined using a bench scale approach based on self and piloted ignition from cone calorimeter tests. The result from the Fourier-transform infrared analysis of the hemp fiber confirms phosphorylation following the fire-retardant treatment, which was visible from the morphological examination with scanning electron microscope. The presence of FR in the composites led to impactful moisture sorption. However, the FR composites demonstrated an enhanced response to fire, indicating potential use as a Class B standard for building construction, and hazard level 3 (HL3) classification as an interior material in vehicles, provided the problem of high emission of smoke is mitigated. [ABSTRACT FROM AUTHOR]

The fire reaction of various types of flammable lightweight materials is investigated using a cone calorimeter. The influences of parameters such as sample density, sample mass, effective heat of combustion and heat flux on the mass loss after exposition are discussed. Interpretations of the hemp fibers' tests results lead us to propose a phenomenological model able to calculate the peak of heat release rate (pHRR) of such thermally thin materials, with or without flame retardant. A database gathering the whole results of tests performed on a large set of materials including fibers, bio-resources panels, bio-based concretes and fabrics is used to validate the proposed model. Interestingly, the model is found to be relevant also for denser wood specimens. The model is based on the distinction of the contributions of the exposed top layer and the deeper layer to the combustion. Indeed, in such materials, the heat conduction is limited (either by the intrinsic properties of the material or by the formation of an insulating char) and therefore the pHRR only depends on a limited volume of materials directly absorbing the heat flux from the radiant cone. Accuracy and limitations of the model are discussed. [ABSTRACT FROM AUTHOR]

The continuous depletion of natural resources coupled with plastics pollution, has prompted the scientific community to explore alternative biobased and/or biodegradable polymers. Poly(ethylene succinate) (PESu) is a promising substitute due to its high processability and controllable biodegradation rate. Meanwhile, hemp possesses interesting properties such as being lightweight, exhibiting excellent long-term mechanical stability, and having low carbon emissions, making it an ideal option for wood replacement. Thus, PESu/hemp fiber composites (with and without compatibilizer) were prepared novel sustainable materials with improved properties. The present study aims to investigate the thermal degradation of PESu/hemp fiber composites. More specifically, thermogravimetric analysis (TGA) and pyrolysis-gas chromatography/mass spectrometry (Py–GC/MS) were employed to examine the degradation mechanism and identify decomposition products. The isoconversional methods of Vyazovkin and Friedman, as well as the model free methods, provided comparable results. Samples without compatibilizer were characterized by a two-step Cn autocatalytic mechanism, while those with compatibilizer showed a triple Cn mechanism. The main thermal degradation pathway of the composites was the β-hydrogen scission of the polymeric backbone. In conclusion, this study provides information about the thermal behavior of PESu/hemp fiber composites useful for their application as alternative "wood plastic composites (WPCs)". [ABSTRACT FROM AUTHOR]

Natural Fibers Reinforced Composites (NFRC) are finding much interest as substitutes for glass- or carbon-reinforced composites thanks to their lightness, easy handling, processing and recyclability. However, their polarity makes them incompatible with hydrophobic thermoplastic matrices, leading to extended moisture adsorption which causes the debonding between fibers and matrix, affecting, thus, the mechanical properties of NFRCs. In the present work, NFRCs were manufactured using hemp fibers previously chemically treated with NaOH alkali solutions or (3-Glycidyloxypropyl) trimethoxysilane (GPTMS) solutions of various concentrations. To assess the effectiveness of the used chemical treatments in hindering the moisture adsorption and the entailed mechanical failure of the NFRCs, untreated and treated hemp fibers based composites were subjected to moisture adsorption test and then to tensile testing as a function of the chemical treatment, temperature and concentration of reagents. The results show that the treatments with 5 wt% of both NaOH and GPTMS are the most effective, reducing composites' water uptake from 7.74% to 6.46% and 5.58% respectively at room temperature, and from 9.67% to 8.19% and 8.13% respectively at 50 °C. Moreover, the comparison between the mechanical testing results carried out before and after the moisture adsorption test, shows that the water uptake induces mainly a stiffness decrease (about 50% when alkali treatments were used and about 60% using silane treatment), while not significantly affect the loading capability of the composites regardless of chemical treatment. However, the specimen obtained using 5 wt% GPTMS is more effective in the prevent the failure of the composite induced by water uptake.

Hemicellulose and lignin were progressively removed from hemp fiber by hydrolysis. SEM, FTIR, XRD analysis and tensile properties evaluation on technical fibers were carried out to understand the structural and mechanical properties of hemp fibers. Significant influence of hemicellulose and lignin content on tensile properties was verified by ANOVA. The fiber tensile strength and initial modulus were decreased with the extensive removal of hemicellulose, along with a constant increasing of elongation at rupture. Torsion and expansion were observed in hemp fibers. It was suggested that the internal structure destruction and reorganization in the ultimate fiber cells was the main reason for the variation of mechanical properties when hemicellulose was gradually dissolved. On the other hand, fiber individualization was achieved by lignin removal and contributed to the elevation of fiber tensile properties. The elongation at break of the hemp fibers decreased slightly with the removal of lignin. NaClO2 solution treatment affected the fiber cells slightly, but effectively changed the properties of the middle lamella jointing between the ultimate fiber cells. The mechanical properties of the hemp fiber were mainly decided by the shearing between single fibers caused by the plastic-like deformation of the middle lamella.

The constant concern about environmental issues has led to the growth of researches about eco-friendly materials. Among them, the natural lignocellulosic fibers have already presented their potential in place of petroleum-based synthetics. However, a relevant number of studies still have to deal with their disadvantages, such as the weak bond on the matrices for a composite performance and limited thermal performance. Thus, the present study analyzes a combination of alkaline treatment and graphene oxide coating in hemp fibers, an NLF applied in several products but with few investigations in engineering applications. The hemp fibers were thermally characterized with thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). The GO-coating was evidenced by the Fourier transform infrared spectroscopy (FTIR) and Raman spectroscopy. Changes in crystallinity were presented by X-ray diffraction (XRD). It was observed an increase of about 4% to 11% of the crystallinity after the alkaline treatment. The thermal stability rose about 13°C in the 10 wt% NaOH-treated and GO-coated fibers, and a change of about 3.5°C was detected for the glass transition temperature. The GO-coating effect was also evidenced by changes in Raman spectra and FTIR curves and was visually detected in the scanning electron microscope (SEM).

Hemp is finding a strong renewal of interest in the production of fine fibers for garment textiles. This resource of long-line fibers would come as a complement to the highly demanded flax fibers, whose large production in the north-west of Europe cannot be extended. In Normandy, where a complete industrial value chain exists for flax, it is intended to adapt it to hemp, and this was demonstrated from the field to the scutched fibers with a complete value chain. In this region, early harvesting is necessary to leave enough time for dew-retting and permit dry storage of stems before mid-September. An early-flowering variety (USO-31) was harvested using dedicated hemp equipment to obtain a 1 m parallel and aligned windrow that can be further processed by flax equipment. The scutching process as well as the fiber's morphological and mechanical properties were particularly studied. Adapted scutching process parameters with reduced advancing speed and beating turbine velocity led to long fiber yields of about 18% of the stem mass. Stem yields were reaching about 6 tons/ha leading to a production of 1.1 tons/ha of long fibers. The tensile properties of the long fibers were highly sufficient for textile applications, and their thickness after hackling was in the range suitable for the production of fine yarns. Compared to other crops grown in Normandy, the hemp as produced in this 2020 case study provides good incomes to the farmer, higher than traditional crops such as wheat or barley, and the results of this study should encourage farmers to grow hemp for textile purposes. [ABSTRACT FROM AUTHOR]

The exploitation of natural fibers to reinforce polymers is a promising practice. Thus, biocomposites have gained increased attention in automotive, construction, and agricultural sectors, among others. The present work reports the reinforcement of recycled high-density polyethylene (r-HDPE) with hemp fibers to afford composite materials as sustainable analogues to conventional wood/plastic composite (WPC) products. HDPE bottles (postconsumer waste) were used as r-HDPE and further reinforced by the addition of hemp fibers. For the synthetic part, thirteen composite materials with different filler concentrations (10–75% wt. in hemp fibers) using either Joncryl or polyethylene-grafted maleic anhydride (PE-g-MA) as compatibilizers were prepared via melt mixing. Materials with good integrity were obtained with a fiber load as high as 75% wt. The structural, thermal, mechanical, and antioxidant properties of the r-HDPE/hemp composites were evaluated using multiple complementary characterization techniques. Stereoscopic microscope images demonstrated the satisfactory dispersion of the hemp fibers into the polymeric matrix, while scanning electron microscopy microphotographs revealed an improved adhesion between the filler and the polymeric matrix in the presence of compatibilizers. The incorporation of hemp fibers contributed to the improvement of the elastic modulus of the composites (almost up to threefold increase). The results showed that as the hemp fiber content increased, the antioxidant properties as well as the degradability of the composites increased. It is noteworthy that composites containing 75% wt. hemp fibers neutralized 80% of 2,2-diphenyil-1-picrylhydrazyl radicals within 45 min (DPPH assay). In conclusion, the present research work demonstrates that thermally recycled HDPE reinforced with biomass fibers received from agricultural waste is a valid alternative for the preparation of commodity products with an eco-friendly character compared to conventional wood/plastic composites. [ABSTRACT FROM AUTHOR]

Integrating bio‐resources in materials allows to reduce the environmental impact of the building industry. This study deals with fire‐retardant treatments, alternative to boric acid and ammonium salts solutions, applied to hemp fibers for thermal insulation application. The aim is to limit the energy, sanitary and environmental impacts of the treatment, while optimizing the technical performances. A laboratory protocol evaluates the flame‐retardant effect of the developed treatments. Treated fibers, including commercial treatments, are subjected to characterization tests: direct ignition small flame, thermal analysis (thermogravimetric analysis [TGA], differential thermal analysis [DTA]), pyrolysis‐combustion flow calorimeter and cone calorimeter. Some of the methods have been adapted to be applied to fibrous materials. The obtained results orientate the formulation of a treatment and highlight the complementarity of the analysis methods. Coupling the results, the ConeTools's predictive model leads to the estimation of the reaction to fire class according to the Euroclass. Euroclass C appears accessible with a tailored treatment. [ABSTRACT FROM AUTHOR]

The article presents the exploration of flax and hemp fibers’ surface free energy depending on the chemical composition of the fiber, which is closely related to the plant variety and the method of extracting the fiber. For this purpose, tests of the surface free energy (SFE), evaluation of the percentage content of individual fiber components and FTIR analyses were conducted. The research was carried out with the use of fibrous materials prepared in three different ways: 1. To analyze the effect of subsequent stages of flax fibers refining process on chemical composition and SFE, 2. to explore the dependence of fiber SFE on hemp variety, the water-retting hemp fibers were used, 3. To evaluate the influence of the retting method of hemp fibers BIAŁOBRZESKIE variety on SFE, the fibers extracted with the use of dew and water retting were used as the research material. The study confirmed that the content of individual components in the fiber influenced its sorption capacity and therefore determined its hydrophilic properties. The values of Pearson’s linear correlation coefficients determined in the statistical analysis proved that the surface free energy was strongly correlated with the content of individual components in the fibers. Understanding the wettability characteristics of bast fibers will allow modeling the properties of products made of these fibers and designing surface modification processes in order to obtain specific functionality of textile products, depending on their intended utilization.

The comfort of walking depends heavily on the shoes used. Consequently, the midsole of shoes is designed in such a way that it can dampen force peaks during walking. This significantly increases the overall wellness during walking. Therefore, the midsole usually consists of rubber-like polymers, such as polyurethane and ethylene-vinyl acetate copolymer. Furthermore, the manufacturing process of these polymers results in a foam-like structure. This further enhances the damping behavior of the material. Nevertheless, it would be desirable to find a cheap and sustainable method to enhance the damping behavior of the shoe midsole. The purpose of this work is to see if hemp fibers, which are part of the polymer matrix material, could improve the stiffness without losing the damping behavior. The mechanical properties of such prepared fiber-reinforced composites were characterized by quasi-static tensile testing and dynamic mechanical analysis. The mechanical properties were examined in relation to the fiber type, weight fraction, and type of polyurethane used. Furthermore, the investigation of the embedding of these fibers in the polymer matrix was conducted through the utilization of optical and electron microscopy.

This research aims to study the effect of using industrial hemp (Cannabis sativa) as an Eco-friendly material in jeans fabric, as it the most popular and preferred fabric for many men, women and children, Attention to environmental protection is the reason for the interest in these fibers, Industrial hemp (Cannabis sativa) is one of bast fibers with a high content of cellulose. Attention to environmental protection is the reason for the interest in these fibers it is almost a challenge for cotton fabrics in some properties and advantages.In this study, five samples of jeans fabric were produced with different blending ratios for the raw materials used in each of warp (100%cotton, 70%cotton:30% hemp) and weft(98%cotton :2%spandex, 48%cotton :2%spandex:50%hemp, 68%cotton :2%spandex:30%hemp), with weave structures(twill 3/1z) ,Tests were done to the produced samples (tensile strength tear strength , stiffness , Fabric Weight ,growth, Spray test (wettability) and Air permeability), The result of the research showed that increasing the percentage of hemp improves the tensile strength, tear strength and air permeability of the samples produced, in addition reducing weight and increasing the stiffness of the fabricThree different clothing products were implemented from sample no. (5) With blending ratios (70% cotton: 30% hemp in the warp // 48% cotton: 2% spandex: 50% hemp in the weft) due to the results of the tests, which showed the suitability of the sample properties and the availability of its comfort properties and its superiority over the cotton material in some properties when blending industrial hemp with cotton.

Natural fibers-reinforced polymer composites have progressed rapidly due to their undeniable advantages. Most of the commercial polypropylene (PP)-based materials are characterized by either high impact toughness or high stiffness, while the manufacture of PP composites with both good toughness and stiffness is challenging at present. In this work, poly[styrene-b-(ethylene-co-butylene)-b-styrene] (SEBS) and poly(styrene-b-butadiene-b-styrene) (SBS) copolymers were used in different amounts as modifiers in PP/hemp fibers (HF) composites, with the aim to use them for electrical vehicle parts. The interface in these multiphase systems was controlled by the addition of maleated polypropylene (MAPP). SEBS and SBS showed different effects on the elongation at break of the blends and the corresponding composites due to the HF that stiffened the multiphase systems. Similarly, a different action of MAPP was observed in the composites containing SEBS or SBS: higher Young's and storage moduli were obtained for the composite containing SBS, while greater elongation at break and impact strength values were recorded for the SEBS-containing system. In addition, a remarkable dispersion in the MAPP-containing composite and two times smaller average particle size were revealed by the SEM analysis for the SEBS particles compared to the SBS ones. The higher affinity of SEBS for PP compared to that for SBS and the different morphological characteristics of the systems containing SEBS and SBS may explain the different effects of these impact modifiers on the mechanical properties of the composites. The composites developed in this work were designed as substitutes for the fully synthetic polymeric materials or metal components used in the manufacturing of automotive parts. [ABSTRACT FROM AUTHOR]

Non-exhaust brake dust and pollution arising from metal, semi-metal, and ceramic brake pads have made recent research consider their replacement by potential natural fibers such as hemp, flax, sisal, etc. These natural fibers are lightweight, biodegradable, and cheap. This paper discusses the wear and friction analysis of hemp fiber reinforced polymer brake pad material. Three test specimens viz. HF4P20, HF5P20, and HF6P20 were prepared per ASTM G99 standards for the pin-on disc tribo-test. The test trials and validation were done using the Taguchi design of experiments and ANOVA. The optimum result showed a consistent coefficient of friction and lowered specific wear rate for HF6P20 brake pad material. Worn surface morphology was done using scanning electron microscopy. [ABSTRACT FROM AUTHOR]

Copyright of Annals of Warsaw University of Life Sciences - SGGW, Forestry & Wood Technology is the property of Wydawnictwo SGGW and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

The constant concern about environmental issues has led to the growth of researches about eco-friendly materials. Among them, the natural lignocellulosic fibers have already presented their potential in place of petroleum-based synthetics. However, a relevant number of studies still have to deal with their disadvantages, such as the weak bond on the matrices for a composite performance and limited thermal performance. Thus, the present study analyzes a combination of alkaline treatment and graphene oxide coating in hemp fibers, an NLF applied in several products but with few investigations in engineering applications. The hemp fibers were thermally characterized with thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). The GO-coating was evidenced by the Fourier transform infrared spectroscopy (FTIR) and Raman spectroscopy. Changes in crystallinity were presented by X-ray diffraction (XRD). It was observed an increase of about 4% to 11% of the crystallinity after the alkaline treatment. The thermal stability rose about 13°C in the 10 wt% NaOH-treated and GO-coated fibers, and a change of about 3.5°C was detected for the glass transition temperature. The GO-coating effect was also evidenced by changes in Raman spectra and FTIR curves and was visually detected in the scanning electron microscope (SEM). [ABSTRACT FROM AUTHOR]

The paper presents a comparative analysis of two extrusion methods of biocomposites with a poly(3-hydroxybutyrate-co-3-hydroxyvalerate acid) (PHBV) matrix filled with flax and hemp fibers in terms of biopolymer production, its processing in the further injection process, and an evaluation of the mechanical and functional properties of the products. Biocomposites containing 15% by weight of the filler were produced using single- and twin-screw extruders. The biocomposites were then processed by injection molding and then, among other things, the pressures in the mold cavity during processing were analyzed. The produced samples were tested by means of the following tests: uniaxial tensile strength, hardness, and impact tensile strength. The biocomposite's microstructure was also analyzed using scanning electron microscopy (SEM), as were the shrinkage and water absorption of the manufactured products. In addition, thermal gravimetric analysis (TGA) and differential scanning calorimetry (DSC) tests were performed. It was found that the extrusion method changed significantly the geometry of the filler fibers and the processing capabilities of the manufactured materials. Significant differences in the mechanical and functional properties of the obtained biocomposite products were also found. On their basis, the advantages and disadvantages of both extrusion methods were discussed. Most of the obtained properties of injection products indicate the choice of single-screw extrusion. The products were characterized by slightly better mechanical properties and lower processing shrinkage. In turn, composites obtained by the screw method were characterized by lower water absorption and lower viscosity of the composite during injection molding. [ABSTRACT FROM AUTHOR]

Motivated by green building applications (bio-composite and insulation materials), thermogravimetric and kinetic analysis is applied to investigate the thermal degradation of cleaned hemp fibers (F), obtained after water retting and mechanical decortication of dioecious plant stalks, and technical fiber (TF), obtained after field retting of monoecious plant stalks. Celluloses (microcrystalline PH105 cellulose and cotton linter cellulose) are used for comparison. F and TF dynamic curves are well described by a four-step scheme. The dominant one concerns pseudo-cellulose decomposition with the release of 70 and 54 mass% volatile matter, respectively. The corresponding activation energies are in the range of typical cellulose values (223 and 211 KJ mol−1). Fiber pretreatments (water washing, mild torrefaction, mercerization) modify the pseudo-cellulose content (release of 73–80 mass% volatile matter) and properties, as testified by the higher activation energies (229–248 kJ mol−1) of the decomposition process. The decortication method also contributes remarkably to the characteristics of the fiber cellulose. [ABSTRACT FROM AUTHOR]

Biomass contained significant amounts of lignin, cellulose and hemicellulose and these high crystallinity results in sub-optimal electrochemical properties. Herein, a hydrothermal method was employed to intentionally weaken the structural integrity of hemp fibers and eliminate cellulose impurities. After undergoing KOH activation, the resulting product achieved a maximum specific surface area of 1644.3 m2 g−1. In a three-electrode test, the specific capacitance of this electrode material was 255.6 F g−1 at a current density of 1 A g−1, representing a nearly double enhancement over the non-hydrothermally treated sample. Furthermore, the assembled symmetric supercapacitor has a specific capacitance of 56.9 F g−1 at 1 A g−1 and a capacitance retention of 102 % after 10,000 charge/discharge cycles (10 A g−1). Its maximum power density was 725 W kg−1 at an energy density of 16.6 Wh kg−1. The desirable capacitive properties indicated that the hydrothermal pretreatment method was expected to have wider applications in the preparation of other biomass-based electrode materials. [Display omitted] • High-performance porous carbon obtained by hydrothermal-assisted treatment. • High specific surface area up to 1644.3 m2 g−1 and good pore structure. • High specific capacitance of 255.6 F g−1, stable at 10,000 charge/discharge cycles. [ABSTRACT FROM AUTHOR]

A significant increase in the consumption of recycled fiber products has been observed worldwide, and the industry is forced to solve the challenges of recycled fiber quality and add strength agents and/or virgin fibers to reach sufficient properties. In order to investigate whether the mechanical and air permeability properties of waste fiber (WF) material can be significantly improved by adding wood kraft fibers (KF), hemp soda fibers (HF), and ammonium persulfate oxidated cellulose nanofibrils (CNF), different fiber blends were prepared and tested. Results revealed the excellence of hemp fibers over wood fibers regarding the improvement of WF products. The results of WF after the addition of 10% mixed fibers (KF + HF) were higher than the results of a 50% KF addition. The impact of CNF depended on fiber composition and properties. A formula for modeling the CNF impact on different fiber compositions was proposed. Obtained fiber material samples showed suitability for home composting, thus contributing to the goals of the European Green Deal regarding reducing landfill waste and the development of cleaner products.

This article investigates the effects of combining a novel protic ionic liquid-based fire retardant (FR) with alkalized hemp fiber. A pivotal importance of this study refers to the hydrophilic properties and limits regarding poor thermal resistance of green composites where standard guidelines for fire risks are crucial. Although it is well-studied that alkalization is essential for green composite’s moisture and mechanical durability, research on the flammability of such a combined treatment for natural fiber-reinforced biopolymer composites is lacking. The alkaline treatment used in the current study follows a process already studied as optimal, particularly for the selected hemp fiber. The fire performance was examined using a bench scale approach based on self and piloted ignition from cone calorimeter tests. The result from the Fourier-transform infrared analysis of the hemp fiber confirms phosphorylation following the fire-retardant treatment, which was visible from the morphological examination with scanning electron microscope. The presence of FR in the composites led to impactful moisture sorption. However, the FR composites demonstrated an enhanced response to fire, indicating potential use as a Class B standard for building construction, and hazard level 3 (HL3) classification as an interior material in vehicles, provided the problem of high emission of smoke is mitigated.

To reduce the use of carbon components sourced from fossil fuels, hemp fibers were pyrolyzed and utilized as filler to prepare EVA-based composites for automotive applications. The mechanical, tribological, electrical (DC and AC) and thermal properties of EVA/fiber biochar (HFB) composites containing different amounts of fibers (ranging from 5 to 40 wt.%) have been thoroughly studied. The morphological analysis highlighted an uneven dispersion of the filler within the polymer matrix, with poor interfacial adhesion. The presence of biochar fibers did not affect the thermal behavior of EVA (no significant changes of Tm, Tc and Tg were observed), notwithstanding a slight increase in the crystallinity degree, especially for EVA/HFB 90/10 and 80/20. Conversely, biochar fibers enhanced the thermo-oxidative stability of the composites, which increased with increasing the biochar content. EVA/HFB composites showed higher stiffness and lower ductility than neat EVA. In addition, high concentrations of fiber biochar allowed achieving higher thermal conductivity and microwave electrical conductivity. In particular, EVA/HFB 60/40 showed a thermal conductivity higher than that of neat EVA (respectively, 0.40 vs. 0.33 W·m−1 ·K−1); the same composite exhibited an up to twenty-fold increased microwave conductivity. Finally, the combination of stiffness, enhanced thermal conductivity and intrinsic lubricating features of the filler resulted in excellent wear resistance and friction reduction in comparison with unfilled EVA. [ABSTRACT FROM AUTHOR]

Large quantities of growing media residues that are rich in nutrients are disposed of after their use in hydroponics. The objective of this study was to investigate the benefits of different organic growing media (wood fibers, hemp fibers, sphagnum moss) residues from hydroponic tomato production as a nutrient source to produce Ethiopian kale. The amount of nutrients that can be reused as fertilizer and the associated CO2 savings have been calculated. Kale was cultivated in sand-residue mixtures, either with 25 or 50 vol% of the mentioned growing media residues. Control treatments with sand with or without nutrient addition were cultivated too. The incorporation of all growing media residues to sand increased the field capacity and growth. Plants that were supplemented with hemp fiber residues showed the strongest growth and highest yields. However, the hemp fiber residues that are used are not suitable for use in the open field due to its excessive content of certain nutrients, which restrict the output quantity. Regarding the fertilization effect of growing media residues, it was calculated that 11–300 kg nutrients ha−1 (N, P, K, Mg, Ca, S), with an average primary energy demand of 90–3435 MJ and 6–317 kg CO2 eq, could potentially be saved when different crops were considered. [ABSTRACT FROM AUTHOR]