Search

Abstract This study explores the potential use of low-cost natural fiber reinforced rope polymers (FRRP) to improve the compressive behavior of circular, square, and rectangular reinforced concrete (RC) specimens. A total of 42 specimens were tested under monotonic axial compression in three groups. Groups were formed to differentiate specimens with different cross-sectional shapes such as circular, square, and rectangular. The findings demonstrate that FRRP can effectively boost the compressive behavior of RC columns. Circular specimens with three-layer hemp FRRP exhibited a 200% increase in compressive strength and a 270% improvement in corresponding strain. Cotton FRRP provided a 117% boost in compressive strength and a 233% enhancement in strain. In square specimens, three-layer hemp FRRP resulted in a 110% rise in compressive strength and a 186% increase in strain, while cotton confinement yielded improvements of 95% and 144%, respectively. For the square and rectangular specimens, the improvement in the compressive behavior was reduced compared to the circular specimens because of stress concentrations near corners. Moreover, the study showed that the hemp FRRP confinement outperformed the cotton confinement. The investigation also revealed that the existing analytical models were inadequate in predicting the mechanical properties of RC confined with natural FRRP. Therefore, the study introduces novel equations to predict the compressive strength and corresponding strain for both hemp and cotton confined concrete in various cross-sectional types. These proposed equations exhibit a good level of accuracy in predicting the compressive strength and corresponding strain.

This study explores the potential use of low-cost natural fiber reinforced rope polymers (FRRP) to improve the compressive behavior of circular, square, and rectangular reinforced concrete (RC) specimens. A total of 42 specimens were tested under monotonic axial compression in three groups. Groups were formed to differentiate specimens with different cross-sectional shapes such as circular, square, and rectangular. The findings demonstrate that FRRP can effectively boost the compressive behavior of RC columns. Circular specimens with three-layer hemp FRRP exhibited a 200% increase in compressive strength and a 270% improvement in corresponding strain. Cotton FRRP provided a 117% boost in compressive strength and a 233% enhancement in strain. In square specimens, three-layer hemp FRRP resulted in a 110% rise in compressive strength and a 186% increase in strain, while cotton confinement yielded improvements of 95% and 144%, respectively. For the square and rectangular specimens, the improvement in the compressive behavior was reduced compared to the circular specimens because of stress concentrations near corners. Moreover, the study showed that the hemp FRRP confinement outperformed the cotton confinement. The investigation also revealed that the existing analytical models were inadequate in predicting the mechanical properties of RC confined with natural FRRP. Therefore, the study introduces novel equations to predict the compressive strength and corresponding strain for both hemp and cotton confined concrete in various cross-sectional types. These proposed equations exhibit a good level of accuracy in predicting the compressive strength and corresponding strain. [ABSTRACT FROM AUTHOR]

The utilization of recycled waste in the production of new concrete raises significant concerns regarding the quality of the resulting concrete. One prominent drawback of recycled aggregate concrete (RAC) is its inferior mechanical properties compared to natural aggregate concrete. In this study, we examine the impact of hemp fiber rope (HFR) confinement on improving the compressive stress-strain behavior of RAC, specifically using recycled brick aggregates from fired-clay solid bricks (RAC-FCSB) as a partial substitute for natural coarse aggregates. Furthermore, we explore and compare the effectiveness of HFR confinement in the form of strips versus fully wrapped confinement. To conduct the experiments, a comprehensive framework was developed, involving a total of 32 cylindrical specimens. The parameters of interest included the configuration of HFR confinement (strips or full wrapping), the number of HFR layers, and the inherent strength of the concrete. The results indicate that HFR strips can significantly enhance the compressive stress-strain response. However, their performance falls short when compared to the fully wrapped HFR confinement. Nonetheless, HFR strips were able to enhance the peak compressive stress and strain of RAC-FCSB up to 204% and 190%, respectively. The second part of the study investigated the performance of existing models of HFR confinement in predicting the peak compressive stress and strain of RAC-FCSB. The deficiencies in existing models were highlighted, and new models based on non-linear regression analysis were proposed to accurately predict the peak compressive stress and strain of HFR-confined RAC-FCSB.