Search

We report long time (250 μs) emission from Al I in laser produced plasma in argon ambient and its dependence on laser power density, background pressure and distance from the target surface. Role of argon metastables as energy reservoirs is discussed.

BACKGROUND Dexmedetomidine is utilized as a sedative agent for drug-induced sleep cine magnetic resonance imaging studies due to its ability to mimic natural sleep and lack of respiratory depressant effects. The outcomes of dexmedetomidine sedation such as respiratory complications and unplanned admissions in obstructive sleep apnea patients undergoing these studies are currently unknown. AIM To describe the outcomes of dexmedetomidine sedation for outpatient drug-induced sleep magnetic resonance imaging in pediatric patients with obstructive sleep apnea. METHODS This is a retrospective chart review conducted in pediatric patients with obstructive sleep apnea undergoing outpatient drug-induced sleep cine magnetic resonance imaging studies with dexmedetomidine sedation. Demographics, comorbidities, polysomnography study results, vital signs, respiratory complications, airway interventions, successful completion of the scan, and unplanned hospital admissions were measured. MAIN RESULTS We analyzed 337 patients aged 2-18 years (median age of 11 years). The imaging was completed with dexmedetomidine as the sole sedative agent in 61% (N = 207) patients. Ketamine was administered as additional sedative agent in 36% (N = 122) of the patients. There was no difference in sedation-related adverse events and respiratory complications with regard to the severity of sleep apnea with the exception of mild desaturation episodes (SpO2 85%-90%). Patients who received additional sedative agents had significantly longer recovery room stay (71.5 [44] vs 55 [39] minutes; 95% CI of difference [9 to 23 min], p

In this work, dynamics of multi-charged ions emitted from an aluminum plasma produced by Q switched Nd: Yag laser is studied using time of flight (TOF) measurements from Langmuir Probe (LP) and spectroscopy (STOF) under Ar ambient of 0.02 mbar. The temporal evolution of multi-charged ions, background neutrals and ions is systematically studied for varying laser intensities. The temporal evolution shows all the species have double peak structure for all the laser intensities considered in the study. The fast peak is sharp whereas the slow peak is broad similar to that observed in previous studies. Moreover, higher charged ions have higher velocity, indicating acceleration from the transient electric field produced at the very initial temporal stages of expansion. Interestingly, the fast peak gets delayed, whereas the slow peak advances in time with increased laser intensity, which has not been reported in earlier studies. The observations point towards the possible role of ambipolar electric fields in the unexpected observed behavior of the TOF profiles., Comment: 8 pages, 10 figures

Transesterification of refined cottonseed oil (CSO) was carried out with methanol, ethanol, 1-butanol, and various mixtures of these alcohols to produce biodiesel. In the mixed alcohol transesterifications, formation of methyl esters was favored over ethyl and butyl esters. The influence of ester head group on fuel properties was determined. Specifically, cold flow properties, lubricity, and energy content improved in the order: CSO butyl esters (CSBE, best) > ethyl esters (CSEE) > methyl esters (CSME). Higher kinematic viscosities (KVs) as well as lower iodine values (IVs) and wear scars were observed with larger ester head groups. Blends of CSME, CSEE and CSBE exhibited properties intermediate to the neat esters. All ester samples were within the limits prescribed in ASTM D6751 and EN 14214 for cetane number, acid value (AV), glycerol (free and total) content, sulfur, and phosphorous. Also examined was the influence of blending alkyl esters with petrodiesel. All blends exhibited improved cold flow properties versus unblended alkyl esters. Enhanced lubricity was observed after blending. With increasing content of biodiesel, higher KVs and lower energy contents were observed. Finally, all blends were within the limits specified in ASTM D975 and D7467 for AV, KV and sulfur.

Biodiesel, defined as mono-alkyl esters of long-chain fatty acids derived from vegetable oils or animal fats, is an attractive renewable fuel alternative to conventional petroleum diesel fuel. Biodiesel produced from oils such as cottonseed oil and poultry fats suffer from extremely poor cold flow properties because of their high saturated fatty acid content. In the current study, Ethyl Levulinate (ethyl 4-oxopentanoate) was investigated as a novel, bio-based cold flow improver for use in biodiesel fuels. The cloud (CP), pour (PP), and cold filter plugging points (CFPP) of biodiesel fuels prepared from cottonseed oil and poultry fat were improved upon addition of ethyl levulinate at 2.5, 5.0, 10.0, and 20.0% (vol). Reductions of 4–5 °C in CP, 3–4 °C in PP and 3 °C in CFPP were observed at 20 vol % ethyl levulinate. The influence of ethyl levulinate on acid value, induction period, kinematic viscosity and flash point was determined. The kinematic viscosities and flash points decreased with increasing content of ethyl levulinate. All samples (≤15 vol % ethyl levulinate) satisfied the ASTM D6751 limit with respect to flash point, but none of the 20 vol % blends were acceptable when compared to the higher EN 14214 specification. Acid value and oxidative stability were essentially unchanged upon addition of ethyl levulinate. In summary, ethyl levulinate appears acceptable as a diluent for biodiesel fuels with high saturated fatty acid content.

The low temperature operability, kinematic viscosity, and acid value of poultry fat methyl esters were improved with addition of ethanol, isopropanol, and butanol with increasing alcohol content. The flash point decreased and moisture content increased upon addition of alcohols to poultry fat methyl esters. The alcohol type did not result in a statistically significant difference in low temperature performance at similar blend ratios in poultry fat methyl esters. In addition, blends of ethanol in poultry fat methyl esters afforded the least viscous mixtures, whereas isopropanol and butanol blends were progressively more viscous, but still within specifications contained in ASTM D6751 and EN 14214. Blends of alcohols in poultry fat methyl esters resulted in failure of the flash point specifications found in ASTM D6751 and EN 14214. Flash points of butanol blends were superior to those of isopropanol and ethanol blends, with the 5 vol.% butanol blend exhibiting a flash point (57 °C) superior to that of No. 2 diesel fuel (52 °C). Blends of alcohols in poultry fat methyl esters resulted in an improvement in acid value with increasing content of alcohol. An increase in moisture content of biodiesel was observed with increasing alcohol content, with the effect being more pronounced in ethanol blends versus isopropanol and butanol blends. Finally, none of the alcohol–methyl ester samples exhibited a phase separation at sub-ambient temperatures.

The low temperature operability and oxidative stability of cottonseed oil methyl esters (CSME) were improved with four anti-gel additives as well as one antioxidant additive, gossypol. Low temperature operability and oxidative stability of CSME was determined by cloud point (CP), pour point (PP), cold filter plugging point (CFPP), and oxidative stability index (OSI). The most significant reductions in CP, PP, and CFPP in all cases were obtained with Technol ® , with the average reduction in temperature found to be 3.9 °C. Gunk ® , Heet ® , and Howe's" were progressively less effective, as indicated by average reductions in temperature of 3.4, 3.0, and 2.8 °C, respectively. In all cases, the magnitude of CFPP reduction was greater than for PP and especially CP. Addition of gossypol, a polyphenolic aldehyde, resulted in linear improvement in OSI (R 2 = 0.9804). The OSI of CSME increased from 5.0 to 8.3 h with gossypol at a concentration of 1000 ppm.

Canola oil was transesterified using a 1 : 1 molar mixture of methanol and ethanol (M/E) with potassium hydroxide (KOH) catalyst. The effects of catalyst concentration (0.5–1.5 wt-%), molar ratio of M/E to canola oil (3 : 1 to 20 : 1) and reaction temperature (25–75 7C) on the percentage yield measured after 2.5 and 5.0 min were optimized using a central composite design. A maximum percentage yield of 98% was obtained for a catalyst concentration of 1.1 wt-% and an M/E to canola oil molar ratio of 20 : 1 at 25 7 Ca t 2.5 min, whereas a maximum percentage yield of 99% was obtained for a catalyst concentration of 1.15 wt-% and all molar ratios of reactants at 25 7C at 5 min. Statistical analysis demonstrated that increasing catalyst concentration and molar ratio of reactants resulted in curvilinear and linear trends in percentage yield, both at 2.5 and 5 min. However, reaction temperature, which affected the percentage yield at 2.5 min linearly, was insignificant at 5 min. The resultant mixed methyl/ethyl canola esters exhibited enhanced low-temperature performance and lubricity properties in comparison to neat canola oil methyl esters and also satisfied ASTM D6751 and EN 14214 standards with respect to oxidation stability, kinematic viscosity, and acid value.

Transesterification of cottonseed oil was carried out using ethanol and potassium hydroxide (KOH). A central composite design with six center and six axial points was used to study the effect of catalyst concentration, molar ratio of ethanol to cottonseed oil and reaction temperature for percentage yield (% yield) and percentage initial absorbance (%A385nm) of the biodiesel. Catalyst concentration and molar ratio of ethanol to cottonseed oil were the most significant variables affecting percentage conversion and %A385nm. Maximum predicted % yield of 98% was obtained at a catalyst concentration of 1.07% (wt/wt) and ethanol to cottonseed oil molar ratio of 20:1 at reaction temperature of 25 °C. Maximum predicted %A385nm of more than 80% was obtained at 0.5% (wt/wt) catalyst concentration and molar ratio of 3:1 at 25 °C. The response surfaces that described % yield and %A385nm were inversely related. Gossypol concentration (% wt), oxidative stability and %A385nm of biodiesel were found to be highly correlated with each other. Hence, color %A385nm is a measure of the amount of pigments present in biodiesel fuels that have not yet been subjected to autoxidation. High gossypol concentration also corresponds to a fuel with high oxidative stability. The fatty acid ethyl esters (FAEE) produced from cottonseed oil had superior oxidative stability to fatty acid methyl esters (FAME) produced from cottonseed oil.