Search

Lipopolysaccharides (LPS) are complex amphiphilic macromolecules forming the external leaflet of the outer membrane of Gram-negative bacteria. The LPS glycolipid portion, named Lipid A, is characterized by a disaccharide backbone carrying multiple acyl chains. Some Lipid A bear very-long-chain-fatty-acids (VLCFA), biosynthesized to span the entire lipid membrane profile. The synbiontic Bradyrhizobium BTAi1 strain carries an unique Lipid A specie, named HoLA, in which VLCFA terminus is covalently-bonded to hopanoid, a triterpenoid displaying structural similarity with eukaryotic sterols. Here, we investigate the role of HoLA in regulating self-assembly, microstructure and thermotropicity of lipid membranes composed by 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphoethanolamine and 1-palmitoyl-2-oleoyl-sn-glycero-3-phospho-1'-rac-glycerol. DLS and SANS indicated the formation of multilamellar aggregates whose size increases when the hopanoid is present in the bilayer. EPR and DSC showed that HoLA induced a more rigid and ordered organization among the lipids in the bilayer, evocative of a mechanical strengthening. Notably, the presence of calcium ions promote an increase of the bilayer thickness and vesicles size, leading to low curvature aggregates. These results highlight the key role of the hopanoid covalently-linked to VLCFA in defining the physico-chemical properties of bacterial envelope, thus offering a robust scientific basis for the interpretation of the biological activity of the considered strain., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2021 Elsevier Inc. All rights reserved.)

Hypothesis: Biomimetic liquid crystalline systems are widely used in skin care cosmetics and topical pharmaceutical preparations. Our ability to rationally design such formulations, however, is hampered by our incomplete understanding of their structure on the nanoscale., Experiments: Using polarized light microscopy and small-angle and wide-angle X-ray scattering, the molecular architecture and properties of a barrier formulation prepared from distearoylphosphatidylcholine mixed with long chain fatty acid and alcohols, with and without antimicrobial pentanediols are directly probed. The nature and composition of the phases identified are determined through small-angle neutron scattering studies using chain-deuterated components, and the detailed structure and dynamics of the gel network lamellae are determined through molecular dynamics simulations., Findings: The formulations show molecular ordering with long and short periodicity lamellar phases and there is little change in these structures caused by changes in temperature, drying, or the application of shear stress. The diol-free formulation is demonstrated to be self-preserving, and the added pentanediols are shown to distribute within the interlamellar regions where they limit availability of water for microbial growth. In culmination of these studies, we develop a more complete picture of these complex biomimetic preparations, and thereby enable their structure-based design., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Elsevier Inc. All rights reserved.)

It is well-established that oil-in-water creams can be stabilised through the formation of lamellar liquid crystal structures in the continuous phase, achieved by adding (emulsifier) mixtures comprising surfactant(s) combined (of necessity) with one or more co-surfactants. There is little molecular-level understanding, however, of how the microstructure of a cream is modulated by changes in co-surfactant and of the ramifications of such changes on cream properties. We investigate here the molecular architectures of oil-free, ternary formulations of water and emulsifiers comprising sodium dodecyl sulfate and one or both of the co-surfactants hexadecanol and octadecanol, using microscopy, small-angle and wide-angle X-ray scattering and small-angle neutron scattering. We then deploy these techniques to determine how the structures of the systems change when liquid paraffin oil is added to convert them to creams, and establish how the structure, rheology, and stability of the creams is modified by changing the co-surfactant. The ternary systems and their corresponding creams are shown to contain co-surfactant lamellae that are subtly different and exhibit different thermotropic behaviours. The lamellae within the creams and the layers surrounding their oil droplets are shown to vary with co-surfactant chain length. Those containing a single fatty alcohol co-surfactant are found to contain crystallites, and by comparison with the cream containing both alcohols suffer adverse changes in their rheology and stability.

Creams are multi-component semi-solid emulsions that find widespread utility across a wide range of pharmaceutical, cosmetic, and personal care products, and they also feature prominently in veterinary preparations and processed foodstuffs. The internal architectures of these systems, however, have to date been inferred largely through macroscopic and/or indirect experimental observations and so they are not well-characterized at the molecular level. Moreover, while their long-term stability and shelf-life, and their aesthetics and functional utility are critically dependent upon their molecular structure, there is no real understanding yet of the structural mechanisms that underlie the potential destabilizing effects of additives like drugs, anti-oxidants or preservatives, and no structure-based rationale to guide product formulation. In the research reported here we sought to address these deficiencies, making particular use of small-angle neutron scattering and exploiting the device of H/D contrast variation, with complementary studies also performed using bright-field and polarised light microscopy, small-angle and wide-angle X-ray scattering, and steady-state shear rheology measurements. Through the convolved findings from these studies we have secured a finely detailed picture of the molecular structure of creams based on Aqueous Cream BP, and our findings reveal that the structure is quite different from the generic picture of cream structure that is widely accepted and reproduced in textbooks.

Late embryogenesis abundant (LEA) proteins comprise a diverse family whose members play a key role in abiotic stress tolerance. As intrinsically disordered proteins, LEA proteins are highly hydrophilic and inherently stress tolerant. They have been shown to stabilise multiple client proteins under a variety of stresses, but current hypotheses do not fully explain how such broad range stabilisation is achieved. Here, using neutron reflection and surface tension experiments, we examine in detail the mechanism by which model LEA proteins, AavLEA1 and ERD10, protect the enzyme citrate synthase (CS) from aggregation during freeze-thaw. We find that a major contributing factor to CS aggregation is the formation of air bubbles during the freeze-thaw process. This greatly increases the air-water interfacial area, which is known to be detrimental to folded protein stability. Both model LEA proteins preferentially adsorb to this interface and compete with CS, thereby reducing surface-induced aggregation. This novel surface activity provides a general mechanism by which diverse members of the LEA protein family might function to provide aggregation protection that is not specific to the client protein., (© 2019 The Author(s).)

Many polymer/surfactant formulations involve a trapped kinetic state that provides some beneficial character to the formulation. However, the vast majority of studies on formulations focus on equilibrium states. Here, nanoscale structures present at dynamic interfaces in the form of air-in-water foams are explored, stabilised by mixtures of commonly used non-ionic, surface active block copolymers (Pluronic ® ) and small molecule ionic surfactants (sodium dodecylsulfate, SDS, and dodecyltrimethylammonium bromide, C 12 TAB). Transient foams formed from binary mixtures of these surfactants shows considerable changes in stability which correlate with the strength of the solution interaction which delineate the interfacial structures. Weak solution interactions reflective of distinct coexisting micellar structures in solution lead to segregated layers at the foam interface, whereas strong solution interactions lead to mixed structures both in bulk solution, forming interdigitated layers at the interface.

Detergent micelles can solubilize membrane proteins, but there is always a need for a pool of free detergent at the critical micellar concentration to maintain the micelle-monomer equilibrium. Amphipol polymeric surfactants (APols) have been developed to replace conventional detergents in membrane-protein studies, but the role of free amphipol is unclear. It has previously been shown that the removal of free APol causes monodisperse outer membrane protein F (OmpF) to form long filaments. However, any remaining APol could not be resolved using electron microscopy. Here, small-angle neutron scattering with isotope contrast matching was used to separately determine the distributions of membrane protein and amphipol in a mixed sample. The data showed that after existing free amphipol had been removed from monodisperse complexes, a new equilibrium was established between protein-amphipol filaments and a pool of newly liberated free amphipol. The filaments consisted of OmpF proteins surrounded by a belt of Apol, whilst free oblate spheroid micelles of Apol were also present. No indications of long-range order were observed, suggesting a lack of defined structure in the filaments., (open access.)

Hypothesis: Oleosomes are stabilized by a complex outer phospholipid-protein-layer. To improve understanding of its structure and stabilization mechanism, this shell has to be studied in extracellular native conditions. This should be possible by SANS using contrast variation. Oleosomes are expected to be highly temperature stable, with molecular changes occurring first in the protein shell. Direct measurements of changes in the shell structure are also important for processing methods, e.g. encapsulation., Experiments: Extracted soybean oleosomes were studied directly and after encapsulation with pectin by SANS using contrast variation. In order to determine structure and size, a shell model of oleosomes was developed. The method was tested against a simple phospholipid-stabilized emulsion. The oleosomes' temperature stability was investigated by performing SANS at elevated temperatures., Findings: Size (R g  = 1380 Å) and shell thickness of native and encapsulated oleosomes have been determined. This is the first report measuring the shell thickness of oleosomes directly. For native oleosomes, a shell of 9 nm thickness surrounds the oil core, corresponding to a layer of phospholipids and proteins. Up to 90 °C, no structural change was observed, confirming the oleosomes' high temperature stability. Successful coavervation of oleosomes was shown by an increase in shell thickness of 10 nm after electrostatic deposition of pectin., (Copyright © 2018 Elsevier Inc. All rights reserved.)

Understanding the origins of lipid membrane bilayer rearrangement in response to external stimuli is an essential component of cell biology and the bottom-up design of liposomes for biomedical applications. The enzymes phospholipase C and D (PLC and PLD) both cleave the phosphorus-oxygen bonds of phosphate esters in phosphatidylcholine (PC) lipids. The atomic position of this hydrolysis reaction has huge implications for the stability of PC-containing self-assembled structures, such as the cell wall and lipid-based vesicle drug delivery vectors. While PLC converts PC to diacylglycerol (DAG), the interaction of PC with PLD produces phosphatidic acid (PA). Here we present a combination of small-angle scattering data and all-atom molecular dynamics simulations, providing insights into the effects of atomic-scale reorganization on the supramolecular assembly of PC membrane bilayers upon enzyme-mediated incorporation of DAG or PA. We observed that PC liposomes completely disintegrate in the presence of PLC, as conversion of PC to DAG progresses. At lower concentrations, DAG molecules within fluid PC bilayers form hydrogen bonds with backbone carbonyl oxygens in neighboring PC molecules and burrow into the hydrophobic region. This leads initially to membrane thinning followed by a swelling of the lamellar phase with increased DAG. At higher DAG concentrations, localized membrane tension causes a change in lipid phase from lamellar to the hexagonal and micellar cubic phases. Molecular dynamics simulations show that this destabilization is also caused in part by the decreased ability of DAG-containing PC membranes to coordinate sodium ions. Conversely, PLD-treated PC liposomes remain stable up to extremely high conversions to PA. Here, the negatively charged PA headgroup attracts significant amounts of sodium ions from the bulk solution to the membrane surface, leading to a swelling of the coordinated water layer. These findings are a vital step toward a fundamental understanding of the degradation behavior of PC lipid membranes in the presence of these clinically relevant enzymes, and toward the rational design of diagnostic and drug delivery technologies for phospholipase-dysregulation-based diseases., Competing Interests: The authors declare no competing financial interest.

Direct binding of calcium ions (Ca 2+ ) to phospholipid membranes is an unclarified yet critical signaling pathway in diverse Ca 2+ -regulated cellular phenomena. Here, high-pressure-liquid-chromatography, small-angle X-ray scattering (SAXS), UV-vis absorption, and differential refractive index detections are integrated to probe Ca 2+ -binding to the zwitterionic lipid membranes in nanodiscs. The responses of the membranes upon Ca 2+ -binding, in composition and conformation, are quantified through integrated data analysis. The results indicate that Ca 2+ binds specifically into the phospholipid headgroup zone, resulting in membrane charging and membrane swelling, with a saturated Ca 2+ -lipid binding ratio of 1:8. A Ca 2+ -binding isotherm to the nanodisc is further established and yields an unexpectedly high binding constant K = 4260 M -1 and a leaflet potential of ca. 100 mV based on a modified Gouy-Chapman model. The calcium-lipid binding ratio, however, drops to 40% when the nanodisc undergoes a gel-to-fluid phase transition, leading to an effective charge capacity of a few μF/cm 2 .

Small-angle neutron scattering has been used to probe the interfacial structure of foams stabilised by small molecule surfactants at concentrations well below their critical micelle concentration. The data for wet foams showed a pronounced Q -4 dependence at low Q and noticeable inflexions over the mid Q range. These features were found to be dependent on the surfactant structure (mainly the alkyl chain length) with various inflexions across the measured Q range as a function of the chain length but independent of factors such as concentration and foam age/height. By contrast, foam stability (for C < CMC) was significantly different at this experimental range. Drained foams showed different yet equally characteristic features, including additional peaks attributed to the formation of classical micellar structures. Together, these features suggest the dynamic air-water interface is not as simple as often depicted, indeed the data have been successfully described by a model consisting paracrystalline stacks (multilayer) of adsorbed surfactant layers; a structure that we believe is induced by the dynamic nature of the air-water interface in a foam.

Deep eutectic solvents have shown the ability to promote the self-assembly of surfactants in solution. However, some differences have been found compared with self-assembly in pure water and other polar organic solvents. The behaviour of alkyltrimethylammonium bromides in choline chloride:glycerol deep eutectic solvent has been studied by means of surface tension, X-ray and neutron reflectivity and small-angle neutron scattering. The surfactants were found to remain surface active and showed comparable critical micelle concentrations to the same surfactants in water. Our scattering studies demonstrate that these surfactants form globular micelles with ellipsoidal shape in solution. The size, shape and aggregation number of the aggregates were found to vary with the chain length of the surfactant. Specific solvent-headgroup interactions were not found in this system, unlike those we have previously postulated for anionic surfactants in choline chloride deep eutectic solvents.

Water-in-supercritical CO 2 microemulsions formed using the hybrid F-H surfactant sodium 1-oxo-1-[4-(perfluorohexyl)phenyl]hexane-2-sulfonate, FC6-HC4, have recently been shown to have the highest water-solubilizing power ever reported. FC6-HC4 demonstrated the ability to outperform not only other surfactants but also other FCm-HCn analogues containing different fluorocarbon and hydrocarbon chain lengths (Sagisaka, M. et al. Langmuir 2015, 31, 7479-7487). With the aim of clarifying the key structural features of this surfactant, this study examined the phase behavior and water/supercritical CO 2 aggregate formation of 1-oxo-1-[4-(perfluorohexyl)phenyl]hexane (Nohead FC6-HC4), which is an FC6-HC4 analogue but now, interestingly, without the sulfonate headgroup. Surprisingly, Nohead FC6-HC4, which would not normally be identified as a classic surfactant, yielded transparent single-phase W/CO 2 microemulsions with polar cores able to solubilize a water-soluble dye, even at pressures and temperatures so low as to approach the critical point of CO 2 (e.g., ∼100 bar at 35 °C). High-pressure small-angle scattering (SANS) measurements revealed the transparent phases to consist of ellipsoidal nanodroplets of water. The morphology of these droplets was shown to be dependent on the pressure, Nohead FC6-HC4 concentration, and water-to-surfactant molar ratio. Despite having almost the same structure as Nohead FC6-HC4, analogues containing both shorter and longer hydrocarbons were unable to form W/CO 2 microemulsion droplets. This shows the importance of the role of the hydrocarbon chain in the stabilization of W/CO 2 microemulsions. A detailed examination of the mechanism of Nohead FC6-HC4 adsorption onto the water surface suggests that the hexanoyl group protrudes into the aqueous core, allowing for association between the carbonyl group and water.

SuperParamagnetic Iron Oxide Nanoparticles (SPIONs) represent a suitable system for several applications especially in nanomedicine. Great efforts have been made to design stable and biocompatible functionalized SPIONs suitable for diagnostics and drug delivery. In particular, zwitterionic-surfactant functionalized SPIONs, obtained through a coating strategy based on hydrophobic interaction, are promising systems for biomedical applications. The size of functionalized SPIONs has emerged as a crucial parameter determining their fate in living organisms. However, not all the proposed functionalization strategies lead to monodispersed systems and SPION clustering often occurs. In this study, we report a systematic investigation on different surfactant-functionalized SPIONs in order to explore the possibility of tuning the particle size by choosing an appropriate amphiphilic molecule. By combining Small-Angle Neutron Scattering (SANS) and Dynamic Light Scattering (DLS) analysis, we have provided a detailed description of the functionalized SPION structure. Furthermore, we have also related the surfactant aggregation properties, i.e. the Critical Micelle Concentration (CMC), to their efficiency in coating the SPION surface. A lack in the formation of a compact shell leads to a clusters formation. On this basis, the present study contributes to furnishing decisive information to define synthetic strategies able to tune functionalized-SPION design.

Using high pressure small angle X-ray scattering (HP-SAXS), we have studied monoolein (MO) mesophases at 18 wt% hydration in the presence of 10 nm silica nanoparticles (NPs) at NP-lipid number ratios (ν) of 1 × 10(-6), 1 × 10(-5) and 1 × 10(-4) over the pressure range 1-2700 bar and temperature range 20-60 °C. In the absence of the silica NPs, the pressure-temperature (p-T) phase diagram of monoolein exhibited inverse bicontinuous cubic gyroid (Q), lamellar alpha (Lα), and lamellar crystalline (Lc) phases. The addition of the NPs significantly altered the p-T phase diagram, changing the pressure (p) and the temperature (T) at which the transitions between these mesophases occurred. In particular, a strong NP concentration effect on the mesophase behaviour was observed. At low NP concentration, the p-T region pervaded by the Q phase and the Lα-Q mixture increased, and we attribute this behaviour to the NPs forming clusters at the mesophase domain boundaries, encouraging transition to the mesophase with a higher curvature. At high NP concentrations, the Q phase was no longer observed in the p-T phase diagram. Instead, it was dominated by the lamellar (L) phases until the transition to a fluid isotropic (FI) phase at 60 °C at low pressure. We speculate that NPs formed aggregates with a "chain of pearls" structure at the mesophase domain boundaries, hindering transitions to the mesophases with higher curvatures. These observations were supported by small angle neutron scattering (SANS) and scanning electron microscopy (SEM). Our results have implications to nanocomposite materials and nanoparticle cellular entry where the interactions between NPs and organised lipid structures are an important consideration.

Superparamagnetic Iron Oxide Nanoparticles (SPIONs) are performing contrast agents for Magnetic Resonance Imaging (MRI). A functionalization strategy for SPIONs based on hydrophobic interactions is a versatile approach easily extendable to several kinds of inorganic nanoparticles and suitable for obtaining stable and biocompatible systems. Here we report on the original preparation of functionalized SPIONs with an 8 nm radius exploiting the hydrophobic interaction between a phosphocholine and an inner amphiphilic. With respect to other similarly functionalized SPIONs, characterized by the typical nanoparticle clustering that leads to large aggregates, our phosphocholine-decorated SPIONs are demonstrated to be monodisperse. We report the in vitro and in vivo study that proves the effective applicability of phosphocholine-decorated SPIONs as MRI contrast agents. The versatility of this functionalization approach is highlighted by introducing on the SPION surface a ruthenium-based potential antitumoral drug, named ToThyCholRu. Even if in this case we observed the formation of SPION clusters, ascribable to the presence of the amphiphilic ruthenium complex, interesting and promising antiproliferative activity points at the ToThyCholRu-decorated SPIONs as potential theranostic agents.

In recent years many studies into green solvents have been undertaken and deep eutectic solvents (DES) have emerged as sustainable and green alternatives to conventional solvents since they may be formed from cheap non-toxic organic precursors. In this study we examine amphiphile behaviour in these novel media to test our understanding of amphiphile self-assembly within environments that have an intermediate polarity between polar and non-polar extremes. We have built on our recently published results to present a more detailed structural characterisation of micelles of sodium dodecylsulfate (SDS) within the eutectic mixture of choline chloride and urea. Here we show that SDS adopts an unusual cylindrical aggregate morphology, unlike that seen in water and other polar solvents. A new morphology transition to shorter aggregates was found with increasing concentration. The self-assembly of SDS was also investigated in the presence of water; which promotes the formation of shorter aggregates.

Hypothesis: The interaction of amphiphilic block copolymers of the poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (PEO-PPO-PEO) group with small molecule surfactants may be "tuned" by the presence of selected alcohols, with strong interactions leading to substantial changes in (mixed) micelle morphology, whilst weaker interactions lead to coexisting micelle types., Experiments: The nature and the strength of the interactions between Pluronic P123 (EO20PO70EO20) and small molecule surfactants (anionic sodium dodecylsulfate, SDS, C12SO4Na), (cationic dodecyltrimethylammonium bromide, C12TAB) and (non-ionic polyoxyethylene(23)lauryl ether, Brij 35, C12EO23OH) is expected to depend on the partitioning of the short, medium and long chain alcohols (ethanol, hexanol and decanol respectively) and was probed using tensiometry, pulsed-gradient spin-echo nuclear magnetic resonance (PGSE-NMR) and small-angle neutron scattering (SANS)., Findings: The SANS data for aqueous P123 solutions with added alcohols were well described by a charged spherical core/shell model for the micelle morphology. The addition of the surfactants led to significantly smaller, oblate elliptical mixed micelles in the absence of alcohols. Addition of ethanol to these systems led to a decrease in the micelle size, whereas larger micelles were observed upon addition of the longer chain alcohols. NMR studies provided complementary estimates of the micelle composition, and the partitioning of the various components into the micelle., (Copyright © 2015 Elsevier Inc. All rights reserved.)

Hybrid surfactants containing both fluorocarbon (FC) and hydrocarbon (HC) chains have recently been shown to solubilize water and form elongated reversed micelles in supercritical CO2. To clarify the most effective FC and HC chain lengths, the aggregation behavior and interfacial properties of hybrid surfactants FCm-HCn (FC length m/HC length n = 4/2, 4/4, 6/2, 6/4, 6/5, 6/6, and 6/8) were examined in W/CO2 mixtures as functions of pressure, temperature, and water-to-surfactant molar ratio (W0). The solubilizing power of hybrid surfactants for W/CO2 microemulsions was strongly affected by not only the FC length but also by that of the HC. Although the surfactants having short FC and/or HC tails (namely, m/n = 4/2, 4/4, and 6/2) did not dissolve in supercritical CO2 (even at ∼17 mM, ≤400 bar, temperature ≤ 75 °C, and W0 = 0-40), the other hybrid surfactants were able to yield transparent single-phase W/CO2 mixtures identified as microemulsions. The solubilizing power of FC6-HCm surfactants reached a maximum (W0 ∼ 80 at 45 °C and 350 bar) with a hydrocarbon length, m, of 4. The W0 value of 80 is the highest for a HC-FC hybrid surfactant, matching the highest value reported for a FC surfactant which contained more FC groups. High-pressure small-angle neutron scattering measurements from FCm-HCn/D2O/CO2 microemulsions were consistent with growth of the microemulsion droplets with increasing W0. In addition, not only spherical reversed micelles but also nonspherical assemblies (rodlike or ellipsoidal) were found for the systems with FC6-HCn (n = 4-6). At fixed surfactant concentration and W0 (17 mM and W0 = 20), the longest reversed micelles were obtained for FC6-HC6 where a mean aspect ratio of 6.3 was calculated for the aqueous cores.

The human IgG1 antibody subclass shows distinct properties compared with the IgG2, IgG3, and IgG4 subclasses and is the most exploited subclass in therapeutic antibodies. It is the most abundant subclass, has a half-life as long as that of IgG2 and IgG4, binds the FcγR receptor, and activates complement. There is limited structural information on full-length human IgG1 because of the challenges of crystallization. To rectify this, we have studied the solution structures of two human IgG1 6a and 19a monoclonal antibodies in different buffers at different temperatures. Analytical ultracentrifugation showed that both antibodies were predominantly monomeric, with sedimentation coefficients s20,w (0) of 6.3-6.4 S. Only a minor dimer peak was observed, and the amount was not dependent on buffer conditions. Solution scattering showed that the x-ray radius of gyration Rg increased with salt concentration, whereas the neutron Rg values remained unchanged with temperature. The x-ray and neutron distance distribution curves P(r) revealed two peaks, M1 and M2, whose positions were unchanged in different buffers to indicate conformational stability. Constrained atomistic scattering modeling revealed predominantly asymmetric solution structures for both antibodies with extended hinge structures. Both structures were similar to the only known crystal structure of full-length human IgG1. The Fab conformations in both structures were suitably positioned to permit the Fc region to bind readily to its FcγR and C1q ligands without steric clashes, unlike human IgG4. Our molecular models for human IgG1 explain its immune activities, and we discuss its stability and function for therapeutic applications., (© 2015 by The American Society for Biochemistry and Molecular Biology, Inc.)

The self-assembly of achiral and chiral porphyrin trimers based on benzene triscarboxamide in solution is studied with the help of NMR, FT-IR, UV-vis, and CD spectroscopy. These studies revealed that in apolar solvents the porphyrin trimers self-assembled in columnar stacks via a combination of hydrogen bonding and π-π stacking interactions. While the critical aggregation constant is about 0.2 mM in chloroform, aggregation already occurs at micromolar concentrations in n-hexane. Small angle neutron scattering (SANS) studies in chloroform, toluene, and n-hexane confirmed aggregation of the trimers into columnar stacks. In chloroform and n-hexane, but not in toluene, the trimers gelated the solvent. In chloroform the stacks of the achiral trimer were found to contain on average about 70 molecules, while in toluene the stacks were much smaller and contained on average 7-9 molecules. In n-hexane the SANS studies revealed that the chiral trimer formed a gel with an average mesh size of the transient network of chains of approximately 90 nm, with chains being built up from effective cylindrical aggregates with an average length of 20 nm.

The structures of purified soluble porcine gastric (Muc5ac) and duodenal (Muc2) mucin solutions at neutral and acidic pH were examined using small-angle X-ray scattering and small-angle neutron scattering experiments. We provide evidence for the morphology of the network above the semidilute overlap concentration and above the entanglement concentration. Furthermore, we investigated the gelation of both types of mucin solutions in response to a reduction in pH, where we observed the formation of large-scale heterogeneities within the polymer solutions, typical of microphase-separated gels. The concentration dependence of the inhomogeneity length scale (Ξ) and the amplitude of the excess scattering intensity [I(ex) (0)] are consistent with previously studied gelled synthetic polymeric systems. The persistence lengths of the chains were found to be similar for both Muc5ac and Muc2 from Kratky plots of the neutron data (8 ± 2 nm)., (© 2014 Wiley Periodicals, Inc.)

Human IgG4 antibody shows therapeutically useful properties compared with the IgG1, IgG2, and IgG3 subclasses. Thus IgG4 does not activate complement and shows conformational variability. These properties are attributable to its hinge region, which is the shortest of the four IgG subclasses. Using high throughput scattering methods, we studied the solution structure of wild-type IgG4(Ser(222)) and a hinge mutant IgG4(Pro(222)) in different buffers and temperatures where the proline substitution suppresses the formation of half-antibody. Analytical ultracentrifugation showed that both IgG4 forms were principally monomeric with sedimentation coefficients s20,w(0) of 6.6-6.8 S. A monomer-dimer equilibrium was observed in heavy water buffer at low temperature. Scattering showed that the x-ray radius of gyration Rg was unchanged with concentration in 50-250 mm NaCl buffers, whereas the neutron Rg values showed a concentration-dependent increase as the temperature decreased in heavy water buffers. The distance distribution curves (P(r)) revealed two peaks, M1 and M2, that shifted below 2 mg/ml to indicate concentration-dependent IgG4 structures in addition to IgG4 dimer formation at high concentration in heavy water. Constrained x-ray and neutron scattering modeling revealed asymmetric solution structures for IgG4(Ser(222)) with extended hinge structures. The IgG4(Pro(222)) structure was similar. Both IgG4 structures showed that their Fab regions were positioned close enough to the Fc region to restrict C1q binding. Our new molecular models for IgG4 explain its inability to activate complement and clarify aspects of its stability and function for therapeutic applications., (© 2014 by The American Society for Biochemistry and Molecular Biology, Inc.)

An increasing human population requires a secure food supply and a cost effective, oral vaccine delivery system for livestock would help facilitate this end. Recombinant antigen adsorbed onto silica beads and coated with myristic acid, was released (∼15% (w/v)) over 24 h at pH 8.8. At pH 2, the myristic acid acted as an enteric coating, protecting the antigen from a variety of proteases. The antigen adsorbed onto silica particles, coated in myristic acid had a conserved secondary structure (measured by circular dichroism (CD) spectroscopy) following its pH-triggered release. Small angle neutron scattering (SANS) was used to measure the thickness of the adsorbed antigen, finding that its adsorbed conformation was slightly greater than its solution radius of gyration, i.e. 120-160 Å. The addition of myristic acid led to a further increase in particle size, with scattering data consistent with an acid thickness slightly greater than a monolayer of fully extended alkyl chains and a degree of hydration of around 50%. Whilst adsorbed onto the silica and coated in myristic acid, the protein was stable over 14 days at 42 °C, indicating a reduced need for cold chain storage. These data indicate that further investigation is warranted into the development of this technology., (Copyright © 2014 The Authors. Published by Elsevier B.V. All rights reserved.)

Nucleosomes containing a human histone variant, H2A.B, in an aqueous solution were analyzed by small-angle neutron scattering utilizing a contrast variation technique. Comparisons with the canonical H2A nucleosome structure revealed that the DNA termini of the H2A.B nucleosome are detached from the histone core surface, and flexibly expanded toward the solvent. In contrast, the histone tails are compacted in H2A.B nucleosomes compared to those in canonical H2A nucleosomes, suggesting that they bind to the surface of the histone core and/or DNA. Therefore, the histone tail dynamics may function to regulate the flexibility of the DNA termini in the nucleosomes., (Copyright © 2014 Biophysical Society. Published by Elsevier Inc. All rights reserved.)

Small-angle neutron scattering was used to probe the interfacial structure of nitrogen-in-water foams created using a series of tri-block polymeric surfactants of the poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (EOx-POy-EOx) range, from which the nature of the polymeric interface could be characterised. The data follow a pronounced Q(-4) decay, along with a number of inflexions and weak but well-defined peaks. These characteristics were well-described by a model embodying paracrystalline stacks of adsorbed polymer layers, whose formation is induced by the presence of the air-water interface, adsorbed at the flat air-water (film lamellae) interface. A minimum of approximately five paracrystalline polymer layers of thickness of the order of 85-160 Å, interspersed with somewhat thicker (400 Å) films of continuous aqueous phase were found to best fit the data. The thickness of the layer (L) was shown to follow a relationship predicted by anchor block dominated polymer adsorption theories from non-selective solvents, L ∼ EO(1)PO(1/3). The insight gained from these studies should permit a more rational design of polymeric stabilisers for hydrophilic polyurethane foams.

The interaction between deuterium-labeled Aerosol OT surfactant (AOT-d34) and sterically stabilized poly(methyl methacrylate) (PMMA) latex particles dispersed in nonpolar solvents has been studied using contrast-variation small-angle neutron scattering (CV-SANS). The electrophoretic mobilities (μ) of the latexes have been measured by phase-analysis light scattering, indicating that μ is negative. Two analogues of the stabilizers for the particles have been studied as free polymers in the absence of PMMA latexes: poly(12-hydroxystearic acid) (PHSA) polyester and poly(methyl methacrylate)-graft-poly(12-hydroxystearic acid) (PMMA-graft-PHSA) stabilizer copolymer. The scattering from both PHSA in dodecane and PMMA-graft-PHSA in toluene is consistent with extended polymer chains in good solvents. In dodecane, PMMA-graft-PHSA forms polymer micelles, and SANS is consistent with ellipsoidal aggregates formed of around 50 polymer chains. CV-SANS measurements were performed by measuring SANS from systems of PHSA, PMMA-graft-PHSA, and PMMA latexes with 10 and 100 mM surfactant solutions of AOT-d34 in both polymer/particle and AOT contrast-matched solvent. No excess scattering above the polymer or surfactant was found for PHSA in dodecane or PMMA-graft-PHSA in dodecane and toluene. This indicates that AOT does not significantly interact with the free polymers. Excess scattering was observed for systems with AOT-d34 and PMMA latexes dispersed in particle contrast-matched dodecane, consistent with the penetration of AOT into the PMMA latexes. This indicates that AOT does not interact preferentially with the stabilizing layers but, rather, is present throughout the colloids. Previous research ( Langmuir 2010, 26, 6967-6976 ) suggests that AOT surfactant is located in the latex PHSA-stabilizer layer, but all the results in this study are consistent with AOT poorly interacting with alkyl-stabilizer polymers.

Phospholipid vesicles (liposomes) formed in pharmaceutically acceptable nonaqueous polar solvents such as propylene glycol are of interest in drug delivery because of their ability to improve the bioavailability of drugs with poor aqueous solubility. We have demonstrated a stabilizing effect of cholesterol on lamellar phases formed by dispersion of distearoylphosphatidylcholine (DSPC) in water/propylene glycol (PG) solutions with glycol concentrations ranging from 0 to 100%. The stability of the dispersions was assessed by determining the effect of propylene glycol concentration on structural parameters of the lamellar phases using a complementary combination of X-ray and neutron scattering techniques at 25 °C and in the case of X-ray scattering at 65 °C. Significantly, although stable lamellar phases (and liposomes) were formed in all PG solutions at 25 °C, the association of the glycol with the liposomes' lamellar structures led to the formation of interdigitated phases, which were not thermostable at 65 °C. With the addition of equimolar quantities of cholesterol to the dispersions of DSPC, stable lamellar dispersions (and indeed liposomes) were formed in all propylene glycol solutions at 25 °C, with the significant lateral phase separation of the bilayer components only detectable in propylene glycol concentrations above 60% (w/w). We propose that the stability of lamellar phases of the cholesterol-containing liposomes formed in propylene glycol concentrations of up to 60% (w/w) represent potentially very valuable drug delivery vehicles for a variety of routes of administration.

High-pressure small-angle neutron scattering (HP-SANS) studies were conducted to investigate nanostructures and interfacial properties of water-in-supercritical CO2 (W/CO2) microemulsions with double-fluorocarbon-tail anionic surfactants, having different fluorocarbon chain lengths and linking groups (glutarate or succinate). At constant pressure and temperature, the microemulsion aqueous cores were found to swell with an increase in water-to-surfactant ratio, W0, until their solubilizing capacities were reached. Surfactants with fluorocarbon chain lengths of n = 4, 6, and 8 formed spherical reversed micelles in supercritical CO2 even at W0 over the solubilizing powers as determined by phase behavior studies, suggesting formation of Winsor-IV W/CO2 microemulsions and then Winsor-II W/CO2 microemulsions. On the other hand, a short C2 chain fluorocarbon surfactant analogue displayed a transition from Winsor-IV microemulsions to lamellar liquid crystals at W0 = 25. Critical packing parameters and aggregation numbers were calculated by using area per headgroup, shell thickness, the core/shell radii determined from SANS data analysis: these parameters were used to help understand differences in aggregation behavior and solubilizing power in CO2. Increasing the microemulsion water loading led the critical packing parameter to decrease to ~1.3 and the aggregation number to increase to >90. Although these parameters were comparable between glutarate and succinate surfactants with the same fluorocarbon chain, decreasing the fluorocarbon chain length n reduced the critical packing parameter. At the same time, reducing chain length to 2 reduced negative interfacial curvature, favoring planar structures, as demonstrated by generation of lamellar liquid crystal phases.

Solution structures for antibodies are critical to understand function and therapeutic applications. The stability of the solution structure of rabbit IgG in different buffers and temperatures was determined by analytical ultracentrifugation and X-ray and neutron scattering. Rabbit IgG showed a principally monomeric species, which is well resolved from small amounts of a dimeric species. The proportion of dimer increased with increased concentration, decreased temperature and heavy water from 8% to 25% in all buffers except for high salt (250 mM NaCl). The Guinier X-ray radius of gyration R(G) likewise increased with concentration in 137 mM NaCl buffer but was unchanged in 250 mM NaCl buffer. The Guinier neutron R(G) values increased as the temperature decreased. The X-ray and neutron distance distribution curves P(r) revealed two peaks, M1 and M2, whose positions did not change with concentration to indicate unchanged structures under all these conditions. The maximum dimension increased with concentration because of dimer formation. Constrained scattering modeling reproducibly revealed very similar asymmetric solution structures for monomeric rabbit IgG in different buffers, in which the Fab-Fc and Fab-Fab pairs were separated by maximally extended hinge structures. The dimer was best modeled by two pairs of Fab regions forming tip-to-tip contacts. The intact rabbit IgG structures explained the ability of its two ligands, the Fc receptor and complement C1q, to bind to the top of its Fc region that is fully accessible and unhindered by the Fab regions., (Copyright © 2012 Elsevier Ltd. All rights reserved.)

Small-angle neutron scattering, zeta potential measurements, and dynamic light scattering have been used to investigate the adsorption of polymer-surfactant mixtures at the oil-water interface. The water-hexadecane interface investigated was in the form of small oil-in-water emulsion droplets stabilized by the anionic surfactant sodium dodecyl sulfate, SDS. The impact of the addition of two different cationic polymers, poly(ethyleneimine), PEI, and poly(dimethyldiallylammonium chloride), polydmdaac, on the SDS adsorption at the oil-water interface was studied. For both polymers, the addition of the polymer enhances the SDS adsorption at low SDS concentrations at the oil-water interface due to a strong surface polyelectrolyte-surfactant interaction and complexation, but the effects are not as pronounced as at the air-water interface. For PEI/SDS, the adsorption was largely independent of solution pH and increasing PEI concentration. In marked contrast to the adsorption at the air-water interface, only monolayer adsorption and no multilayer adsorption was observed. For the SDS-polydmdaac mixture, the enhanced SDS adsorption was in the form of a monolayer, and the adsorption increased with increasing polymer concentration. The strong SDS/polydmdaac surface interaction resulted in regions of emulsion instability. The zeta potential measurements showed that the combination of SDS and polydmdaac at the interface resulted in charge reversal at the interface. This correlates with the regions of emulsion stability at both high and low polymer concentrations, such that the instabilities arise in the regions of low or zero surface charge. The results presented and their interpretation represent a development in the understanding of polymer-surfactant adsorption at the oil-water interface.

Nanocapsules containing poly(d,l-lactide) shell and retinyl palmitate core have been prepared by the pre-formed polymer interfacial deposition method. Dynamic light scattering measurements yielded an average hydrodynamic diameter of ∼220nm and a polydispersity index of ∼0.12. Small-angle neutron scattering experiments revealed the presence of two populations of nanocapsules of core diameters ∼192 and 65nm. Freeze fracture transmission electron microscopy showed a polydisperse population of nanocapsules (NC), with a poly(d,l-lactide) shell thickness between 11 and 3nm. For comparison purposes, nanoemulsions (NE, no polymer) and nanospheres (NS, polymer matrix) were also prepared. Each type of nanoparticles exhibited a different morphology (when examined by electron microscopy), in particular NC showed deformability by capillary adhesion. All three types of nanoparticles successfully encapsulated the poorly water-soluble molecules baicalein and benzophenone-3. The thermal behavior of the various nanoparticles was different to a physical mixture of its individual components. Cytotoxicity and phototoxicity assays, performed in human keratinocytes (HaCaT) and murine fibroblasts (BALB/c 3T3), showed that the NC were only cytotoxic at high concentrations. In vitro release studies of benzophenone-3, by the dialysis bag method using NC and NS, showed a sustained release; however, permeation studies using plastic surgery human abdominal skin in Franz diffusion cells showed that a higher amount of benzophenone-3 from NC penetrated into the skin, most probably due to the deformable nature of these nanoparticles., (Copyright © 2012 Elsevier Inc. All rights reserved.)

Establishing structure-property relationships in the black insoluble eumelanins, the key determinants of human pigmentation and skin photoprotective system, is a considerable conceptual and experimental challenge in the current drive for elucidation of the biological roles of these biopolymers and their application as advanced materials for organoelectronics. Herein, we report a new breakthrough toward this goal by the first detailed investigation on the nanoscale level of the oxidative polymerization of 5,6-dihydroxyindole (DHI), a model process of eumelanin synthesis. On the basis of a combined use of spectrophotometry, dynamic light scattering (DLS), and small-angle neutron scattering (SANS) investigations, it was possible to unveil the dynamics of the aggregation process before precipitation, the key relationships with visible light absorption and the shape of fundamental aggregates. The results indicated a polymerization mechanism of the type: Polymer(n) + DHI(x) = Polymer(n+x), where DHI(x) indicates monomer, dimer, or low oligomers (x ≤ 5). During polymerization, visible absorption increases rapidly, reaching a plateau. Particle growth proceeds slowly, with formation of 2-D structures ~55 nm thick, until precipitation occurs, that is, when large aggregates with a maximum hydrodynamic radius (R(h)) of ~1200 nm are formed. Notably, markedly smaller R(h) values, up to ~110 nm, were determined in the presence of poly(vinyl alcohol) (PVA) that was shown to be an efficient aggregation-preventing agent for polymerizing DHI ensuring water solubilization. Finally, it is shown that DHI monomer can be efficiently and partially irreversibly depleted from aqueous solutions by the addition of eumelanin suspensions. This behavior is suggested to reflect oxidant-independent competing pathways of polymer synthesis and buildup via monomer conversion on the active aggregate surface contributing to particle growth. Besides filling crucial gaps in DHI polymerization, these results support the attractive hypothesis that eumelanins may behave as a peculiar example of living biopolymers. The potential of PVA as a powerful tool for solution chemistry-based investigations of eumelanin supramolecular organization and for technological manipulation purposes is underscored.

The effect of encapsulating oils on the phase behaviour and the microstructure of wormlike micelles formed by polyoxyethylene cholesteryl ether (ChEO(10)) and triethylene glycol monododecyl ether co-surfactant (C(12)EO(3)) was investigated using rheology, Cryo-TEM and small-angle neutron scattering measurements. Six alkyl ester oils bearing small, systematic variations in their molecular structure were encapsulated: ethyl butyrate (EB(24)), ethyl caproate (ECO(26)), ethyl caprylate (EC(28)), methyl enanthate (ME(17)), methyl caprylate (MC(18)) and butyl butyrate (BB(44)), where the subscripts refer to the length of the alkyl chain and fatty acid chain, respectively, on either sides of the ester link. The addition of alkyl ester oils to ChEO(10)/C(12)EO(3) solutions promotes the longitudinal growth of the surfactant aggregates into wormlike micelles possessing an elliptical cross-section, with r(minor) 31±2 Å and r(major) varying from 45 to 70 Å. At fixed alkyl chain length, oils with longer fatty acid chains were found to be more efficient in inducing wormlike micelle formation or their elongation, following the order: EC(28)>ECO(26)>EB(24). Instead, at fixed fatty acid chain length, increasing the alkyl chain has a negative effect on the longitudinal micellar growth (MC(18)>EC(28) and EB(24)>BB(44)). At high co-surfactant concentrations and in the presence of EB(24), an unusual phase of ring-like micelles was detected. Overall, the orientation of the oil molecules within the micelles enables them to act as co-surfactants with a small head-group, decreasing the average cross-section area and promoting longitudinal growth of the micelles into worms., (Copyright © 2012 Elsevier Inc. All rights reserved.)

Solutions of negatively charged graphene (graphenide) platelets were produced by intercalation of nanographite with liquid potassium-ammonia followed by dissolution in tetrahydrofuran. The structure and morphology of these solutions were then investigated by small-angle neutron scattering. We found that >95 vol % of the solute is present as single-layer graphene sheets. These charged sheets are flat over a length scale of >150 Å in solution and are strongly solvated by a shell of solvent molecules. Atomic force microscopy on drop-coated thin films corroborated the presence of monolayer graphene sheets. Our dissolution method thus offers a significant increase in the monodispersity achievable in graphene solutions.

The relationships between molecular architecture, aggregation, and interfacial activity of a new class of CO(2)-philic hybrid surfactants are investigated. The new hybrid surfactant CF2/AOT4 [sodium (4H,4H,5H,5H,5H-pentafluoropentyl-3,5,5-trimethyl-1-hexyl)-2-sulfosuccinate] was synthesized, having one hydrocarbon chain and one separate fluorocarbon chain. This hybrid H-F chain structure strikes a fine balance of properties, on one hand minimizing the fluorine content, while on the other maintaining a sufficient level of CO(2)-philicity. The surfactant has been investigated by a range of techniques including high-pressure phase behavior, UV-visible spectroscopy, small-angle neutron scattering (SANS), and air-water (a/w) surface tension measurements. The results advance the understanding of structure-function relationships for generating CO(2)-philic surfactants and are therefore beneficial for expanding applications of CO(2) to realize its potential using the most economic and efficient surfactants., (© 2012 American Chemical Society)

As synthesized, bulk single-walled carbon nanotube (SWNT) samples are typically highly agglomerated and heterogeneous. However, their most promising applications require the isolation of individualized, purified nanotubes, often with specific optoelectronic characteristics. A wide range of dispersion and separation techniques have been developed, but the use of sonication or ultracentrifugation imposes severe limits on scalability and may introduce damage. Here, we demonstrate a new, intrinsically scalable method for SWNT dispersion and separation, using reductive treatment in sodium metal-ammonia solutions, optionally followed by selective dissolution in a polar aprotic organic solvent. In situ small-angle neutron scattering demonstrates the presence of dissolved, unbundled SWNTs in solution, at concentrations reaching at least 2 mg/mL; the ability to isolate individual nanotubes is confirmed by atomic force microscopy. Spectroscopy data suggest that the soluble fraction contains predominately large metallic nanotubes; a potential new mechanism for nanotube separation is proposed. In addition, the G/D ratios observed during the dissolution sequence, as a function of metal:carbon ratio, demonstrate a new purification method for removing carbonaceous impurities from pristine SWNTs, which avoids traditional, damaging, competitive oxidation reactions., (© 2011 American Chemical Society)

Sodium cholate (NaC) and sodium deoxycholate (NaDC) in binary and ternary aqueous mixtures were investigated by means of surface tension, electron paramagnetic resonance spectroscopy (EPR), small angle neutron scattering (SANS) and mutual diffusion coefficient analysis. Concerning the NaC-H(2)O and NaDC-H(2)O binary mixtures, the surface tension, EPR and diffusion measurements confirmed the formation of micelles above a well detectable critical concentration. The SANS data indicated for both systems, the formation of ellipsoidal micelles whose major axis increased with concentration and minor axis remained constant. The data were interpreted under the assumption that aggregate growth occurred via hydrogen bonding of small aggregates along one preferential direction. For the NaC-NaDC-H(2)O ternary mixtures, the surface tension and EPR results were in good agreement with the Clint model prediction for the ideal mixed micellization. Based on this model, the SANS data enabled a complete description of the mixed aggregates in terms of dimensions, composition and concentration. In turn, this strategy allowed for a satisfactory interpretation of the main and cross-term diffusion coefficient trends, which are quite complex.

The article addresses an important, and still unresolved question in the field of CO(2) science and technology: what is the minimum fluorine content necessary to obtain a CO(2)-philic surfactant? A previous publication (Langmuir 2002, 18, 3014) suggested there should be an ideal fluorination level: for optimization of possible process applications in CO(2), it is important to establish just how little F is needed to render a surfactant CO(2)-philic. Here, optimum chemical structures for water-in-CO(2) (w/c) microemulsion stabilization are identified through a systematic study of CO(2)-philic surfactant design based on dichain sulfosuccinates. High pressure small-angle neutron scattering (HP-SANS) measurements of reversed micelle formation in CO(2) show a clear relationship between F content and CO(2) compatibility of any given surfactant. Interestingly, high F content surfactants, having lower limiting aqueous surface tensions, γ(cmc), also have better performance in CO(2), as indicated by lower cloud point pressures, P(trans). The results have important implications for the rational design of CO(2)-philic surfactants helping to identify the most economic and efficient compounds for emerging CO(2) based fluid technologies., (© 2011 American Chemical Society)

Small-angle neutron scattering and pulsed-gradient spin-echo NMR have been used to examine the solution conformation of a series of water soluble poly(N-(2-hydroxypropyl) methacrylamide) P(HPMA) co-polymer drug delivery vehicles incorporating a coiled-coil peptide motif as a novel pH sensitive non-covalent linker. The conformation of the HPMA homopolymer is well-described by a Gaussian coil model and changing pH from pH 7 to pH 5 has little effect on the solution conformation, as quantified via the radius of gyration. Copolymerisation with 5-10mol% of the K3 peptide bearing methacrylate monomer (K3-MA), gave a series of copolymers that exhibited an increase in radius of gyration at both pH's, despite being typically 30% lower in molecular weight, indicating that the K3-MA causes a perturbation (expansion) of the copolymer conformation. Subsequent addition of an equimolar amount of the complementary peptide E3 makes little further difference to the conformation, indicative of the intimate binding (coiled-coil motif) between the two peptides. Again, the effects of pH are small. Only the addition of a large aromatic structure such as methotrexate causes a further perturbation of the structure - the hydrophobic interaction between the MTX units causes a significant collapse of the polymer coil. These findings further elaborate the understanding of those factors that determine the solution conformation of novel polymer therapeutics., (Copyright © 2011 Elsevier B.V. All rights reserved.)

Five non-ionic dialkylglycerol poly(oxyethylene) ether surfactants, designated 2C(m)E(n) (where m, the number of carbons in each alkyl chain=16 or 18, and n, the number of oxyethylene units=12, 16 or 17) have been examined for their ability to form vesicles when dispersed in water or in an aqueous solution of 154 mM NaCl, alone or in the presence of 50 mol% cholesterol. Freeze fracture electron microscopy and light scattering showed that regardless of the hydrating fluid, all the non-ionic surfactants, with the exception of 2C(16)E(17) and 2C(18)E(17), formed vesicles in the absence of cholesterol - 2C(16)E(17) and 2C(18)E(17) instead formed micellar aggregates. All surfactants, however, formed vesicles in the presence of 50 mol% cholesterol. Small angle neutron scattering studies of the surfactant vesicles enabled the bilayer thickness and repeat distance (d-spacing) to be determined. The bilayers formed by all the non-ionic surfactants in the absence of cholesterol were surprisingly thin (∼50 Å for the E(12) containing surfactants and ∼64 Å for 2C(18)E(16)) most likely due to the intrusion of oxyethylene groups into the hydrophobic core of the bilayers. In contrast, however, the non-ionic surfactants exhibited a relatively large d-spacing of around ∼130-150 Å. The addition of 50 mol% cholesterol had a dramatic effect on the thickness of the vesicle bilayer, increasing its size by 10-20 Å, most probably because of an extrusion of oxyethylene from the hydrophobic region of the bilayer and/or a reduction in the tilt on the surfactant alkyl chains. Additionally the presence of cholesterol in a vesicle tended to reduce slightly both the d-spacing and the thickness of the water layer separating the bilayers. The presence of NaCl, even at the low concentrations used in the study, did affect the properties of the bilayer such that it reduced the d-spacing and, in the case of cholesterol-containing systems, also reduced bilayer thickness., (Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.)

We report the formation of wormlike micelles (WLM) in poly(oxyethylene) cholesteryl ether (ChEO(10)) aqueous solutions by the addition of lipophilic monoglycerides at room temperature (monolaurin (ML), monocaprin (MC), and monocaprylin (MCL)) bearing 12-, 10-, and 8-carbon alkyl chains, respectively. A combination of rheology, small-angle neutron scattering (SANS), and cryo-TEM was used to study their viscoelastic properties and structure. With the successive addition of cosurfactant, a significant increase in viscosity and a clear solidlike behavior is obtained, suggesting the formation of a viscoelastic network of wormlike micelles. Only for MCL is typical Maxwellian behavior obtained. The onset of micellar growth, as detected by the occurrence of solidlike behavior and a significant increase in viscosity, is obtained for 0.30 (1 wt%), 0.34 (1 wt%), and 0.60 (1.5 wt%) cosurfactant/ChEO(10) molar ratios with ML, MC, and MCL, respectively. With ML and MC, extremely long relaxation times (exceeding 20 s) compared to those of MCL are obtained, and zero-shear viscosity values are more than 1 order of magnitude higher than with MCL. These results show that cosurfactants with longer alkyl chain lengths (ML and MC) induce the formation of longer wormlike micelles and do so at lower concentrations. SANS measurements on dilute solutions confirm that the viscoelastic behavior correlates with an increase in contour length and reveals an elliptical cross-section with an axial ratio of around 2. Cryo-TEM images provide visual evidence of the wormlike micelles and confirm the elliptical shape of the cross-section. The addition of small amounts of aliphatic oils (ethyl butyrate, EB, and ethyl caprylate, EC) and cyclic oils (peppermint, PP, and tea tree, TT, oils) to ChEO(10) solutions induces wormlike micelle formation at a lower cosurfactant concentration or even in its absence (for PP, TT, and EC) because of their probable localization in the palisade layer. The viscosity peak and height of the plateau modulus occur at increasing monoglyceride concentration following the order PP ≈ TT > EC > EB > no oil., (© 2011 American Chemical Society)

The self-assembly in solution of puroindoline-a (Pin-a), an amphiphilic lipid binding protein from common wheat, was investigated by small angle neutron scattering, dynamic light scattering and size exclusion chromatography. Pin-a was found to form monodisperse prolate ellipsoidal micelles with a major axial radius of 112 ± 4.5 Å and minor axial radius of 40.4 ± 0.18 Å. These protein micelles were formed by the spontaneous self-assembly of 38 Pin-a molecules in solution and were stable over a wide pH range (3.5-11) and at elevated temperatures (20-65 °C). Pin-a micelles could be disrupted upon addition of the non-ionic surfactant dodecyl-β-maltoside, suggesting that the protein self-assembly is driven by hydrophobic forces, consisting of intermolecular interactions between Trp residues located within a well-defined Trp-rich domain of Pin-a., (© The Owner Societies 2011)

The fluorinated double-tailed glutarate anionic surfactant, sodium 1,5-bis[(1H,1H,2H,2H-perfluorodecyl)oxy]-1,5-dioxopentane-2-sulfonate (8FG(EO)(2)), was found to stabilize water-in-supercritical CO(2) microemulsions with high water-to-surfactant molar ratios (W(0)). Studies were carried out here to obtain detailed information on the phase stability and nanostructure of the microemulsions by using a high-pressure UV-vis dye probe and small-angle neutron scattering (SANS) measurements. The UV-vis spectra, with methyl orange as a reporter dye, indicated a maximum attainable W(0) of 60 at 45 and 75 °C, and SANS profiles indicated regular droplet swelling with a linear relationship between the water core nanodroplet radius and W(0). This represents the highest water solubilization reported to date for any water-in-CO(2) microemulsion. Further analysis of the SANS data indicated critical packing parameters for 8FG(EO)(2) at the microemulsion interface >1.34, representing approximately 1.1 times the value for common aerosol-OT in water-in-heptane microemulsions under equivalent conditions.

Recent work shows a correlation between chiral asymmetry in non-terrestrial amino acids extracted from the Murchison meteorite and the presence of hydrous mineral phases in the meteorite [D. P. Glavin and J. P. Dworkin, Proc. Natl. Acad. Sci. U. S. A., 2009, 106, 5487-5492]. This highlights the need for sensitive experimental tests of the interactions of amino acids with clay minerals together with high level computational work. We present here the results of in situ neutron scattering experiments designed to follow amino acid adsorption on an exchanged, 1-dimensionally ordered n-propyl ammonium vermiculite clay. The vermiculite gel has a (001) d-spacing of order 5 nm at the temperature and concentration of the experiments and the d-spacing responds sensitively to changes in concentration, temperature and electronic environment. The data show that isothermal addition of D-histidine or L-histidine solutions of the same concentration leads to an anti-osmotic swelling, and shifts in the d-spacing that are different for each enantiomer. This chiral specificity, measured in situ, in real time in the neutron beam, is of interest for the question of whether clays could have played an important role in the origin of biohomochirality.

Understanding the gelation of liquids by low molecular weight solutes at low concentrations gives an insight into many molecular recognition phenomena and also offers a simple route to modifying the physical properties of the liquid. Bis-(α,β-dihydroxy ester)s are shown here to gel thermoreversibly a wide range of solvents, raising interesting questions as to the mechanism of gelation. At gelator concentrations of 5-50 mg ml⁻¹, gels were successfully formed in acetone, ethanol/water mixtures, toluene, cyclohexane and chloroform (the latter, albeit at a higher gelator concentration). A range of neutron techniques - in particular small-angle neutron scattering (SANS) - have been employed to probe the structure of a selection of these gels. The universality of gelation in a range of solvent types suggests the gelation mechanism is a feature of the bis-(α,β-dihydroxy ester) motif, with SANS demonstrating the presence of regular structures in the 30-40 Å range. A correlation between the apparent rodlike character of the structures formed and the polarity of the solvent is evident. Preliminary spin-echo neutron scattering studies (SESANS) indicated the absence of any larger scale structures. Inelastic neutron spectroscopy (INS) studies demonstrated that the solvent is largely unaffected by gelation, but does reveal insights into the thermal history of the samples. Further neutron studies of this kind (particularly SESANS and INS) are warranted, and it is hoped that this work will stimulate others to pursue this line of research.