577 results on '"Heben, Michael J."'
Search Results
2. Hydrothermally deposited Sb2S3 absorber, and a Sb2S3/CdS solar cell with VOC approaching 800 mV
3. The effect of remnant CdSe layers on the performance of CdSeTe/CdTe photovoltaic devices
4. Approach to determining the limiting recombination mechanism in CdTe-based solar cells
5. Applications of spectroscopic ellipsometry for multilayer analysis of CdTe solar cell structures incorporating Magnesium–Zinc oxide high resistivity transparent layers
6. High vacuum heat-treated MZO: Increased n-type conductivity and elimination of S-kink in MZO/CdSe/CdTe solar cells
7. Four‐Terminal Perovskite‐CdSeTe Tandem Solar Cells: From 25% toward 30% Power Conversion Efficiency and Beyond
8. Deep reinforcement learning based optimization for a tightly coupled nuclear renewable integrated energy system
9. 20%-efficient polycrystalline Cd(Se,Te) thin-film solar cells with compositional gradient near the front junction
10. Real-Time Spectroscopic Ellipsometry for Flux Calibrations in Multi-Source Co-Evaporation of Thin Films: Application to Rate Variations in CuInSe 2 Deposition.
11. 17.2% Efficient CdSexTe1−x solar cell with (InxGa1−x)2O3 emitter on lightweight and flexible glass
12. Environmental Impact per Energy Yield for Bifacial Perovskite Solar Cells Outperforms Crystalline Silicon Solar Cells
13. Comprehensive Study of Carrier Recombination in High‐Efficiency CdTe Solar Cells Using Transient Photovoltage.
14. Maximize CdTe solar cell performance through copper activation engineering
15. Low-bandgap mixed tin–lead iodide perovskites with reduced methylammonium for simultaneous enhancement of solar cell efficiency and stability
16. Materials requirements for improving the electron transport layer/perovskite interface of perovskite solar cells determined via numerical modeling
17. Revisiting the Terawatt Challenge
18. Wet chemical etching of cadmium telluride photovoltaics for enhanced open-circuit voltage, fill factor, and power conversion efficiency
19. 17.2% Efficient CdSexTe1−x solar cell with (InxGa1−x)2O3 emitter on lightweight and flexible glass.
20. Seed‐Assisted Growth for Scalable and Efficient Perovskite Solar Modules
21. Understanding and Advancing Bifacial Thin Film Solar Cells under Dual Illumination
22. Incorporating Potassium Citrate to Improve the Performance of Tin‐Lead Perovskite Solar Cells
23. Optical simulation of external quantum efficiency spectra of CuIn1−xGaxSe2 solar cells from spectroscopic ellipsometry inputs
24. Controlling Band Alignment at the Back Interface of Cadmium Telluride Solar Cells using ZnTe and Te Buffer Layers
25. Enhanced Grain Size and Crystallinity in CH3NH3PbI3 Perovskite Films by Metal Additives to the Single-Step Solution Fabrication Process
26. Low Temperature Photoluminescence Spectroscopy of Defect and Interband Transitions in CdSexTe1-x Thin Films
27. Identification of Defect Levels in Copper Indium Diselenide (CuInSe2) Thin Films via Photoluminescence Studies
28. Optical design of perovskite solar cells for applications in monolithic tandem configuration with CuInSe2 bottom cells
29. Development of CdCl2 Activation to Minimize Zn Loss from Sputtered Cd1-xZnxTe Thin Films for Use in Tandem Solar Cells
30. Numerical Modelling of Front Contact Alignment for High Efficiency Cd1-xZnxTe and Cd1-xMgxTe Solar Cells for Tandem Devices
31. Efficient Cd(Se, Te) Solar Cells with Cd(O, S, Se, Te) at the Front Interface
32. Interrogating Dominant Recombination Pathways in CdTe Solar Cells Using Wavelength-Dependent External Radiative Efficiency Measurements
33. Environmentally Controlled Electroluminescence/Photoluminescence Imaging System with Current Density-Voltage Capabilities for Quantitative Degradation Analysis of Perovskite Thin Film Solar Cells
34. Temperature Dependent Fill Factor in CdSe/CdTe PV Devices from -20°C to 60°C Under AM1.5G and AM0 Spectra
35. Numerical Modeling of Bifacial Thin Film Solar Cells
36. Optical Properties of (InxGal-x)203 Alloys and Evaluation as Emitter Layer in CST PV
37. Defect Signatures in Admittance Spectroscopy of Perovskite Solar Cells
38. Cadmium Selenide (CdSe) as an Active Absorber Layer for Solar Cells with Voc Approaching 750 mV
39. Precursor Ink Engineering for Scalable Slot-Die Coating of Perovskite Films for Photovoltaic Mini-Module Production
40. Enabling High Efficiency, Flexible, and Lightweight CdTe Solar Cells with a Cadmium Stannate Transparent Conducting Oxide
41. Cadmium Telluride Accelerator Consortium (CTAC)
42. The Microstructure of Thin Film CdSe Following Cadmium Chloride Activation Treatment
43. SCAPS-ID Simulations of CdTe Based Solar Cells with an Amorphous Silicon-Based Back Buffer
44. Radiation Tolerance Studies of CdSe/CdTe Bilayer Solar Cells on Space-Qualified Cover Glass
45. Approaching 19% Efficiency in (InxGa(1-x))2O3/CdSe/CdTe Solar Cells with Improved Front & Back Interfaces
46. Effect of CdS Annealing on the Performance of Antimony Selenosulfide Solar Cells
47. CdTe-based thin film photovoltaics: Recent advances, current challenges and future prospects
48. Engineering Perovskite Precursor Inks for Scalable Production of High‐Efficiency Perovskite Photovoltaic Modules
49. Photolysis of Mixed Halide Perovskite Nanocrystals
50. Oxygen Management to Avoid Photo-Inactive Cd(S,Se) for Efficient Cd(Se,Te) Solar Cells
Catalog
Books, media, physical & digital resources
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.