Search

Mechanical responsiveness is essential to all biological systems down to the level of tissues and cells. The intra- and extracellular mechanics of such systems are governed by a series of proteins, such as microtubules, actin, intermediate filaments and collagen. As a general design motif, these proteins self-assemble into helical structures and superstructures that differ in diameter and persistence length to cover the full mechanical spectrum. Gels of cytoskeletal proteins display particular mechanical responses (stress stiffening) that until now have been absent in synthetic polymeric and low-molar-mass gels. Here we present synthetic gels that mimic in nearly all aspects gels prepared from intermediate filaments. They are prepared from polyisocyanopeptides grafted with oligo(ethylene glycol) side chains. These responsive polymers possess a stiff and helical architecture, and show a tunable thermal transition where the chains bundle together to generate transparent gels at extremely low concentrations. Using characterization techniques operating at different length scales (for example, macroscopic rheology, atomic force microscopy and molecular force spectroscopy) combined with an appropriate theoretical network model, we establish the hierarchical relationship between the bulk mechanical properties and the single-molecule parameters. Our results show that to develop artificial cytoskeletal or extracellular matrix mimics, the essential design parameters are not only the molecular stiffness, but also the extent of bundling. In contrast to the peptidic materials, our polyisocyanide polymers are readily modified, giving a starting point for functional biomimetic hydrogels with potentially a wide variety of applications, in particular in the biomedical field.

Stable helical polymers with a preferred handedness are compounds that offer intriguing characteristics. This review describes the progress in the synthesis of helical polyisocyanides and the investigations to determine their structural properties, such as helical pitch and handedness, by spectroscopic measurements and high resolution AFM. This review is not intended to be comprehensive; its purpose is to highlight recent studies that allow a better understanding of the main aspects of helical polyisocyanides.

We describe the synthesis of a series of phthalocyanine (Pc)-perylenediimide (PDI)(8) "octad" molecules, in which eight PDI moieties are attached to a Pc core through alkyl-chain linkers. There is clear spectroscopic evidence that these octads can exist as non-aggregated "monomers" or form aggregates along the Pc cores, depending on the type of Pc and the solvent medium. In the low dielectric constant solvents, into which the octads are soluble, photoexcitation of the PDI units leads to rapid energy transfer to the Pc centre, rather than a charge separation between moieties. In octad monomers, the Pc singlet excited-state decays within tens of ps, whereas the excitons are stabilised in the aggregated form of the molecules, typically with lifetimes in the order of 1-10 ns. By contrast, in an octad design in which pi-pi interactions are suppressed by the steric hindrance of a corona of incompatible glycol tails around the molecule, a more straightforward photophysical interaction of Forster energy transfer between the PDI moieties and Pc core may be inferred. We consider these molecules as prototypical multichromophoric aggregates, giving delocalised states with considerable flexibility of design.

The design and synthesis of functional biomimetic water soluble polymers with a defined secondary structure has been developed using β-sheet polyisocyanopeptide scaffolds. Water soluble isocyanopolymers were prepared by random copolymerisation of the azido functionalized isocyanopeptides with nonfunctionalised methyl ester isocyanides derived from alanine. Upon saponification of the latter function a rigid rod water soluble polymer was obtained with an accessible azide for postfunctionalization. The potential of these biomimetic polymers was successfully demonstrated by using the click chemistry reaction of these polymers with an acetylene functionalised rhodamine dye.

The ligand (S,S)-1,1,4,7,10,10-hexaphenyl-1,4,7,10-tetraphosphadecane, (S,S)-tetraphos, reacts with hexa(aqua)-nickel(ll) chloride in the presence of trimethylsilyl triflate (TMSOTf) in dichloromethane to give the yellow square-planar complex [Ni{(R,R) -tetraphos}](OTf)2, which has been crystallographically characterized as the square-pyramidal, acetonitrile adduct [Ni(NCMe){(R,R)-tetraphos}]OTf. Cyclic voltammograms of the nickel(ll) complex in dichloromethane and acetonitrile at 20 °C showed two reduction processes at negative potentials with oxidative (E p 0x ) and reductive (E p red ) peak separations similar to those observed for ferrocene/ferrocenium under identical conditions, suggesting two one-electron steps. The cyclic voltammetric data for the divalent nickel complex in acetonitrile at temperatures below -20 °C were interpreted according to reversible coordination of acetonitrile to the nickel(I) and nickel(0) complexes. The divalent palladium and platinum complexes [M{(R,R) -tetraphos}](PF6)2 and [M 2 {(R,R)-tetraphos} 2 ](OTf) 4 have been prepared. The reduction potentials for the complexes [M{(R,R) -tetraphos}](PF6)2 increase in the order nickel(ll) < palladium(ll) < platinum(ll). The reaction of (S,S)-tetraphos with bis(cycloocta-1,5-diene)nickel(0) in benzene affords orange [Ni{(R,R)-tetraphos}], which slowly rearranges into the thermodynamically more stable, yellow, double-stranded helicate [Ni 2 { (R,R)-tetraphos}2]; the crystal structures of both complexes have been determined. The reactions of (S,S)-tetraphos with [M(PPh 3 ) 4 ] in toluene (M = Pd) or benzene (M = Pt) furnish the double-stranded helicates [M 2 {(R,R) -tetraphos}2]; the palladium complex crystallizes from hot benzene as the 2-benzene solvate and was structurally characterized by X-ray crystallography. In each of the three zerovalent complexes, the coordinated (R,R)-tetraphos stereospecifically generates tetrahedral M(PP) 2 stereocenters of M configuration.

Contains fulltext : 36533.pdf (Publisher’s version ) (Closed access) Rigid rod polyisocyanopeptides have been synthesised containing acetylene groups on the side arms as scaffolds for multifunctional derivatisation by the copper-catalysed click reaction between an acetylene and an azide. All materials were characterised in detail by spectroscopic procedures and for the processable polymers, atomic force microscopy was used to determine the molecular weight parameters. The solubility properties of the synthesised macromolecules are very dependent on the stereochemistry and/or the presence of solubilising trimethylsilyl groups on the acetylene function. The potential for derivatisation of the acetylene-containing materials using click chemistry was successfully demonstrated by the reaction of these polymers with aliphatic tails functionalised with azide moieties.

The complex (M)-(-)-[Pt2{(R,R)-tetraphos}2](CF3SO3)4 · 4.5 H2O, where tetraphos = 1,1,4,7, 10,10-hexaphenyl-1,4,7,10-tetraphosphadecane, has been isolated and structurally characterized. The compound crystallizes in the space group C2 with two crystallographically different, but very similar, cations in the structure, each of which contains a 2-fold axis coincident with the crystallographic 2-fold axis. Each independent cation of the salt consists of a double-stranded, diplatinum(II) helicate that completes a ca. one-eighth turn of a double α-helix in the M direction, as evidenced by the angle between the two, non-orthogonal PtP4 square planes in each of the independent molecules. A feature of the structures is the 10-membered ring containing the two platinum atoms and the four chiral phosphorus stereocentres of R configuration; this ring has a distorted twist-boat-chair-boat conformation of λ helicity, which is responsible for the M twist of the helicate.

This contribution describes the synthesis and full characterization of oligo(ethylene glycol) functionalized polyisocyanopeptides. The thermal behavior of the resulting semi-flexible polymers was investigated in diluted aqueous conditions and features a tunable Lower Critical Solution Temperature (LCST). In line with previously described oligo(ethylene glycol) decorated polymers, the LCST of the materials shows a very small hysteresis effect and directly correlates with the oligo(ethylene glycol) side-chains length; short oligo(ethylene glycol) substituents are associated with lower LCST. In contrast with poly[oligo(ethylene glycol) methacrylate], a significant effect of the degree of polymerization (DP) of the poly(isocyanopeptide) core on the LSCT of the materials was observed. Most remarkably, poly(isocyanopeptide)-graft-oligo(ethylene glycol) chains of high DP lead to the reversible formation of strong hydrogels above the transition temperature, even at very low polymer concentration (0.1 wt.%). AFM studies point towards the formation of a highly organized fibrillar network in the gel-state, reminiscent of structures observed for low molecular weight gelators, polysaccharides, and protein-based (hydro)gels. It is proposed that the stiff and well-defined helical poly(isocyanopeptide) backbone avoids the collapse of the chains into globules at the transition temperature as usually observed for more flexible systems. Thus, above a critical DP the semi-flexible non-linear PEGs chains are getting kinetically trapped in an extended fibrillar network, when the oligo(ethylene glycol) corona hydrophilicity is lowered at higher temperature. As a result these polymers exhibit a strong ability to gel water at extremely low polymer concentrations.

We report on the synthesis and detailed photo-physical investigation of four model chromophore side chain polyisocyanopeptides: two homopolymers of platinum-porphyrin functionalized polyisocyanopeptides (Pt-porphyrin-PIC) and perylene-bis(dicarboximide) functionalized polyisocyanopeptides (PDI-PIC), and two statistical copolymers with different ratios of Pt-porphyrin and PDI molecules attached to a rigid, helical polyisocyanopeptide backbone. (1)H NMR and circular dichroism measurements confirm that our model compounds retain a chiral architecture in the presence of the chromophores. The combination of Pt-porphyrin and PDI chromophores allows charge- and/or energy transfer to happen. We observe the excitation and relaxation pathways for selective excitation of the Pt-porphyrin and PDI chromophores. Studies of photoluminescence and transient absorption on nanosecond and picosecond scales upon excitation of Pt-porphyrin chromophores in our multichromophoric assemblies show similar photophysical features to those of the Pt-porphyrin monomers. In contrast, excitation of perylene chromophores results in a series of energy and charge transfer processes with the Pt-porphyrin group and forms additional charge-transfer states, which behave as an intermediate state that facilitates electronic coupling in these multichromophoric systems.

Polyisocyanopeptides have been synthesised containing acetylene groups on the side arms as scaffolds for multifunctional derivatisation by the copper-catalysed click reaction with a variety of azides. By using ethylene glycol azide and perylene azide chromophoric water-soluble polymeric nanowires (Mw 1–2 million Daltons) were formed. The potential to incorporate multiple chromophores was also demonstrated by the reaction of the acetylene-containing polymers with perylene azide and azidocoumarin dyes. In the latter case a blue-shifted emission of the coumarin was observed due to the interaction with the coupled perylene molecules. In particular the ability to form water-soluble dye-containing polymers, which can be modified by the addition of biomolecules, such as antibodies, proteins and peptides, give materials that are very promising as novel biomarker materials.

The ligand (R,S)-Ph(2)PCH(2)CH(2)P(Ph)CH(2)CH(2)P(Ph)CH(2)CH(2)PPh(2), (R,S)-tetraphos, combines with silver(I) and gold(I) ions in the presence of hexafluorophosphate to diastereoselectively self-assemble the head-to-head (H,H) diastereomers of the double-stranded, dinuclear metal complexes [M(2)[(R,S)-tetraphos](2)](PF(6))(2) in which the two chiral metal centers in the complexes have M (R end of phosphine) and P (S end of phosphine) configurations. The crystal and molecular structures of the compounds have been determined: (H,H)-(M,P) -[Ag(2)[(R,S)-tetraphos](2)](PF(6))(2), monoclinic, P2(1)/c, a = 10.3784(2), b = 47.320(1), c = 17.3385(4) A, beta = 103.8963(5) degrees, Z = 4; (H,H)-(M,P)-[Au(2)[(R,S)-tetraphos](2)](PF(6))(2), monoclinic, P.2(1) (No. 4, c unique axis), a = 24.385(4), b = 46.175(3), c = 14.820(4) A, Z = 8. The complexes crystallize as racemic compounds in which the unit cell in each case contains equal numbers of enantiomorphic molecules of the cation and associated anions. The cations in both structures have similar side-by-side structures of idealized C(2) symmetry, the bulk helicity of each molecule in the solid state being due solely to the twist of the central ten-membered ring containing the two metal ions of opposite configuration, which has the chiral twist-boat-chair-boat conformation. When 1 equiv each of (R,S)-tetraphos, (R,R)-(+/-)-tetraphos, (S,S)-(+)-tetraphos, 2 equiv of Ph(2)PCH(2)CH(2)PPh(2) (dppe), and 7 equiv of [AuCl(SMe(2))] in dichloromethane are allowed to react for several minutes in the presence of an excess of ammonium hexafluorophosphate in water (two phases), the products are the double-stranded digold(I) complexes in which each ligand strand has recognized itself by stereoselective self-assembly, together with [Au(dppe)(2)]PF(6).

Numerous reports describe the photoluminescence of two- and three-coordinate gold(I)-phosphine complexes, but emission in their analogous four-coordinate complexes is almost unknown. This work examines the luminescence of tetrahedral gold(I) complexes of the types [Au(diphos)(2)]PF(6) (diphos = 1,2-bis(diphenylphosphino)ethane, 1) and [Au(2)(tetraphos)(2)](PF(6))(2) (tetraphos = (R,R)-(+/-)/(R,S)-1,1,4,7,10,10-hexaphenyl-1,4,7,10-tetraphosphadecane, (R,R)-(+/-)/(R,S)-2). Although nonemitting in solution, these complexes luminesce with an intense yellow color (lambda(max) 580-620 nm) at 293 K in the solid state or when immobilized as molecular dispersions within solid matrixes. The excited-state lifetimes of the emissions (tau 4.1-9.4 micros) are markedly dependent on the inter- and intramolecular phenyl-phenyl pairing interactions present. At 77 K in an ethanol glass, two transitions are observed: a minor emission at lambda(max) 415-450 nm and a major emission at lambda(max) 520-595 nm. For [Au(1)(2)]PF(6), lifetimes of tau 251.0 +/- 20.5 micros were determined for the former transition and tau 14.9 +/- 4.6 micros for the latter. Density functional theory (DFT) calculations and comparative studies indicate that the former of these emissions involves triplet LMCT pi(Ph) --Au(d)-P(p) transitions associated with individual P-phenyl groups. The latter emissions, which are the only ones observed at 293 K, are assigned to LMCT pi(Ph-Ph) --Au(d)-P(p) transitions associated with excited P-phenyl dimers. Other tetrahedral gold(I)-phosphine complexes containing paired P-Ph substituents display similar emissions. The corresponding phosphine ligands, whether free, protonated, or bound to Ag(I), do not exhibit comparable emissions. Far from being rare, luminescence in four-coordinate Au(I)-phosphine complexes appears to be general when stacked P-phenyl groups are present.

We report the preparation, isolation and characterization of oxide, sulfide, selenide, and borane derivatives of a series of indenylphosphines. Some members of the series had already been prepared, and we have completed the series. We have prepared (indenyl)xPh3-xPO (x = 1–3) for the oxide series, (indenyl)xPh3-xPS (x = 3) for the sulfides, (indenyl)xPh3-xPSe (x = 1,2) for the selenides, and (indenyl)xPh3-xPBH3 (x = 1–3) for the boranes. Linear relationships of the 31P NMR chemical shift with the number of indenyl groups were observed. The compounds were also characterized by 1H and 13C NMR spectroscopy and mass spectrometry. The solid-state structure of diindenylphenylphosphine selenide was determined by X-ray crystallography and found to be isomorphous with diindenylphenylphosphine sulfide. The solid-state structure of triindenylphosphine sulfide was also determined by X-ray crystallography and the indenyl groups were confirmed to all be the inden-3-yl isomer. Additionally, pentacarbonyl(triindenylphosphine)molybdenum(0), 1,3-bis(diphenylphosphino)indene diborane, and rac-bis(1-(diphenylphosphino)indenyl)ironII) diborane were prepared, isolated, and characterized.