Search

Historical buildings account for a significant portion of the energy use of today’s building stock, and there are usually limited energy saving measures that can be applied due to antiquarian and esthetic restrictions. The purpose of this case study is to evaluate the use of the building structure of a historical stone building as a heating battery, i.e., to periodically store thermal energy in the building’s structures without physically changing them. The stored heat is later utilized at times of, e.g., high heat demand, to reduce peaking as well as overall heat supply. With the help of Artificial Intelligence and Convolutional Neural Network Deep Learning Modelling, heat supply to the building is controlled by weather forecasting and a binary calendarization of occupancy for the optimization of energy use and power demand under sustained comfortable indoor temperatures. The study performed indicates substantial savings in total (by approximately 30%) and in peaking energy (by approximately 20% based on daily peak powers) in the studied building and suggests that the method can be applied to other, similar cases.

This IEA Annex 80 Subtask C report and the associated brochures provide examples of well-documented field studies. These field studies apply resilient cooling technologies to reduce energy demand and carbon emissions for cooling and reduce the overheating risk in different types of buildings, including newly constructed and existing buildings. Examples and details on building information, energy systems, resilient cooling technologies, key performance indicators (KPIs), and performance evaluation amd lessons learned are included in the report and the brochures. The present report summarizes all 13 field study buildings collected in Subtask C of IEA-EBC Annex 80. This summary presents information on the field studies, the resilient cooling technologies applied in the field studies, the KPIs, and the performance evaluation and lessons learned. The values of KPIs for building similar functions, i.e., residential buildings, under different climate conditions were discussed. In the field study brochures, detailed information is inlcuded for each building. The field studies are presented in brochure format. Each brochure contains information in a standardized format. This includes the introduction & climate, building information, resilient cooling, KPI evaluation, design simulation, performance evaluation, discussion, lessons learned, references & key contacts.

In this study, the performance of different cooling technologies from energy and economicperspectives were evaluated for six different prototype residential Nearly Zero Energy Buildings(NZEBs) within a planned future city district in central Sweden. This was carried out by assessingthe primary energy number and life cycle cost analysis (LCCA) for each building model and coolingtechnology. Projected future climate file representing the 2050s (mid-term future) was employed.Three cooling technologies (district cooling, compression chillers coupled/uncoupled with photovoltaic (PV) systems, and absorption chillers) were evaluated. Based on the results obtained fromprimary energy number and LCCA, compression chillers with PV systems appeared to be favorableas this technology depicted the least value for primary energy use and LCCA. Compared to compression chillers alone, the primary energy number and the life cycle cost were reduced by 13%, onaverage. Moreover, the district cooling system was found to be an agreeable choice for buildingswith large floor areas from an economic perspective. Apart from these, absorption chillers, utilizingenvironmentally sustainable district heating, displayed the highest primary energy use and life cycle cost which made them the least favorable choice. However, the reoccurring operational cost fromthe LCCA was about 60 and 50% of the total life cycle cost for district cooling and absorption chillers,respectively, while this value corresponds to 80% for the compression chillers, showing the high netpresent value for this technology but sensitive to future electricity prices.

A two-trough parabolic-shaped concentrating photovoltaic solar collector with a vertical half-size ‘phosphorus-passivated emitter rear totally diffused’ bifacial cell string receiver was designed and built for household applications, with the aim of smooth the electrical ‘duck curve’. The study consisted in testing the concentrating photovoltaic solar collector outdoors, under real weather conditions, for its daily electrical peak power and efficiency, as well as for its electrical transversal and longitudinal Incidence Angle Modifier direction. The outdoor testing measurements were conducted in a parabolic trough with low concentration coupled with a central vertical half-size ‘phosphorus-passivated emitter rear totally diffused’ bifacial cell string receiver. Furthermore, the electrical transversal Incidence Angle Modifier showed to be very delicate due to the position and outline of the receiver, which led to an electrical peak efficiency close to 10% at ±25° (i.e., for an electrical power output of around 49.3 W/m2). To validate the measured parameters, a ray-tracing software has been used, where the measured Incidence Angle Modifiers have a very good agreement with the simulated Incidence Angle Modifiers (e.g., deviation of <4%). Consequently, the concentrating solar collector met the objective of lowering the Photovoltaic cell stress and high radiation intensity, by shifting the electrical peak power at normal (e.g., at 0°) to higher incidence angles (e.g., ±25°); this aids the electrical demand peak shaving, by having the highest electrical power production displaced from the highest intensity solar radiation during the day.

The world is facing a rapid increase of air conditioning of buildings. It is the motivation of Annex 80 to develop, assess and communicate solutions of resilient cooling and overheating protection. Resilient Cooling is used to denote low energy and low carbon cooling solutions that strengthen the ability of individuals and our community to withstand, and prevent, thermal and other impacts of changes in global and local climates. It encompasses the assessment and Research & Development of both active and passive cooling technologies of the following four groups: Reduce heat loads to people and indoor environments.Remove sensible heat from indoor environments.Enhance personal comfort apart from space cooling.Remove latent heat from indoor environments.The present review sums up the state of the art in cooling solutions which may be regarded as resilient. Its main objective is to systematically describe the available cooling solutions, their physical basis, their benefits and limitations, their technology readiness level, their practical availability, and applicability. Doing so, the State-of-the-Art Review forms the basis for the work of Annex 80.

The use of the concept of "primary energy" is present in all types of regulations at both European and national level, so that all aspects related to the reduction of energy use and energy efficiency measures speak in terms of primary energy and Primary Energy Factors, necessary for its conversion. The existing consensus on the use of the term is not such in terms of the methodology for calculating the Primary Energy Factors to be adopted, which is the reason for the search for a methodology that acquires the status of global and standard. Using an analytical methodology, this study will analyze and compare the main methods used by agencies and institutions: the Physical Energy Content Method and the Partial Substitution Method, together with another less widely used method, the Exergy Method. The three calculation methodologies will be applied to the case study of the Swedish electricity production mix. The main objective of this thesis is to analyze the advantages and disadvantages of those methodologies, as well as discuss the difficulties of defining some variables such as efficiencies and system boundaries. The results obtained in this study demonstrate the complexity of trying to analyze a system as complex as the energy consumption of a country based on the calculation of a single number or Primary Energy Factor. The system boundaries affect the results. At the same time, the use of the Physical Energy Content Method is discarded because it incurs thermodynamic discrepancies. On the other hand, the use of the Partial Substitution Method and Exergy Method is encouraged, since they reflect more accurately the primary energy consumption, as long as the values of efficiencies that they use are clearly defined and referenced. However, there is a more widespread use of the Physical Energy Content Method in the institutions since the other methods present the great difficulty of establishing a consensus on the energy and exergy efficiencies values adopted. The compl

The building sector accounts for a third of the total energy use in Sweden, and district heating provides half of the heating needs. The peak demand loads within a district heating network occur both regularly and irregularly and impose a burden on the energy company to fulfill the demand, often by using more expensive and less environmentally friendly resources (e.g., fossil fuels) instead of the waste heat from industry or biofuels. Heat storage during hours of less demand and prior to colder periods can be used for load management and sustainable planning of energy supply, as well as reduction of total greenhouse gas emissions. Thus, heat supply to the building can be lowered temporarily during the peak power period to utilize the stored thermal energy within the building thermal inertia. The use of indoor temperature decay and the delivery of heating power to a multifamily building are studied here, and heating storage capacity and thermal inertia are calculated. During the performed decay test, the energy supply was estimated to be reduced by 61% for 5 h, which resulted in only a 0.3 °C temperature decay. Therefore, the suggested method can shave eventual peaks in supplied heat with minimal influence on the thermal comfort.

In the present study, a zero-dimensional thermal model has been developed to analyze a novel low concentration photovoltaic-thermal (CPVT) collector. The model has been developed by driving heat transfer and energy balance equations for each part of the collector and then solving all the equations simultaneously. Moreover, a Monte-Carlo ray-tracing software has been used for optical stimulations of the parabolic trough solar collector. The novel CPVT collector has been experimentally tested at Gävle University (Sweden) and the model has been validated against the experimental results. The primary energy saving equivalent to the thermal-electrical power cogeneration of the CPVT collector has been determined. The effect of glass cover removal, heat transfer fluid (HTF) inlet temperature and mass flow rate on the collector performance has been investigated. The optimum HTF mass flow rates of the collector for maximum electrical yield and overall primary energy saving were determined under specified operating conditions by considering the pump consumption. The effect of mean fluid temperature on the thermal and electrical efficiencies has been studied and the characteristic equation of the thermal efficiency has been obtained. The thermal and electrical peak efficiencies of the collector have been found to be 69.6% and 6.1%, respectively.

The world is facing a rapid increase of air conditioning of buildings. This is driven by multiple factors, such as urbanization and densification, climate change and elevated comfort expectations together with economic growth in hot and densely populated regions of the world. The trend towards cooling seems inexorable therefore it is mandatory to guide this development towards sustainable solutions. Against this background, it is the motivation of Annex 80 to develop, assess and communicate solutions of resilient cooling and overheating protection. Resilient Cooling is used to denote low energy and low carbon cooling solutions that strengthen the ability of individuals and our community as a whole to withstand, and also prevent, thermal and other impacts of changes in global and local climates. It encompasses the assessment and Research & Development of both active and passive cooling technologies of the following four groups: - Reduce heat loads to people and indoor environments. - Remove sensible heat from indoor environments. - Enhance personal comfort apart from space cooling. - Remove latent heat from indoor environments. The Annex 80’s main objective is to support a rapid transition to an environment where resilient low energy and low carbon cooling systems are the mainstream and preferred solutions for cooling and overheating issues in buildings

The increase in population and living standards, as well as global warming and heatwaves due to climate change, have created a challenge to meet the cooling demand in buildings. In this study, the cooling requirement for a multifamily building through simulations in a future city district in central-Sweden was determined. Different air supply set point strategies, window to floor ratio and building rotations were employed to minimize the cooling requirements. The building was modelled so as to meet the Nearly Zero Energy Building (NZEB) requirements. Window to floor ratio of 10% with a piecewise proportional controller for supply temperature was depicted as appropriate for the building. A 45° rotation of the building increased the cooling demand. The cooling demand of the building increased by employing the extreme climate condition, as a representative for future climate, with factors 3.8 and 6.4 for cooling set points 25°C and 27°C for window to floor ratio 10%. This implies the need for a resilient building to withstand future climate conditions. The requirement to update the climate files was also used for decision making in the design process and building regulation.

The Swedish environmental assessment certification system Miljöbyggnad rewards lower energy use in comparison to that of building regulations, related to total heated floor area. Previous studies suggest that this indicator shows the efficiency of the technical design of the building; not how well the building is utilized. Thus, a more suitable quantity/unit can be the one that takes into account the extent of how the building is used in a more efficient and sustainable way. The aim of this paper is to discuss if current energy units are sustainable enough to assess efficient use of buildings and investigate how indicators can affect the grades and criteria of a certification system. Normalization of simulated energy use of a school building, by using the total heated floor area, the total building’s enclosing area, number of occupants and the schedule of occupancy, give different results.

A concentrating Photovoltaic solar collector with a vertical half-size n-PERT bifacial cell string receiver was designed and built. The study consisted in testing the CPV solar collector for its daily electrical peak power and efficiency, as well as for its electrical transversal and longitudinal Incidence Angle Modifier direction. The outdoor testing measurements were conducted in a parabolic trough with low concentration coupled with a central vertical half-size n-PERT bifacial cell string receiver.The measurement results showed an electrical peak efficiency of 2.2% (20.9 W/m2, at normal incidence), 3.6% (24.5 W/m2, at +11º displaced from normal incidence) and 6.3% (49.3 W/m2, at +25º displaced from normal incidence) depending on the collector tilt angle employed. Moreover, the electrical Incidence Angle Modifier showed to be extremely sensitive for transversal incidence angles due to the specific placement and shape of the receiver, which led to an electrical peak efficiency of at ±25º. Therefore, the presented solar collector fulfilled the aim of lowering the PV cell stress and high radiation intensity, by shifting the electrical peak power to higher incidence angles., Swedish Foundation for International Cooperation in Research and Higher Education

The PVT technology combines solar PV and solar thermal in the same PVT panel. In this way, both electricity and heat are produced by the PVT panel. Compared to the PV technology and the solar heating technology the PVT technology is in the early market stage with only few small and weak industries active. Best practices for the PVT technology, which is still under rapid development, are summarized. Marketed systems with different PVT panel types, different PVT system types with different components for different applications are considered. The potential advantages for PVT systems and the needs for key actors in order to establish a successful sustainable future PVT market are given. Finally, recommendations for a subsidy scheme for PVT systems are given, so that a PVT market can be developed in parallel with the successful PV market.

This study investigates different cases to obtain optimal Window-to-Wall ratio (WWR) in seven different climate conditions based on the Köppen–Geiger climate classification. The optimal WWR was decided based on the minimum amount of total energy use (total of cooling, heating, and lighting energy use) of a building model during a complete year. The impact of overhang and automatic blinds were assessed on the optimization of WWR for a building with integrated automatic lighting control. Moreover, three different windows with different U-values and features were employed in order to analyze their effect on the energy use and WWR of the building. IDA-Indoor Climate and Energy (IDA-ICE) was used to carry out the simulations. The software has been validated based on ASHRAE Standard 140. Based on each climate condition, orientation, employed window type, and comfort conditions, an optimal range with a specific combination of window with blind, overhang, or neither was found.

This chapter investigates the implementation of district cooling systems by exploring several research studies reported in the literature. The topics addressed include typologies and design parameters, benefits and limitations, applications of the system, and the technology readiness level. District cooling systems are generally regarded as cost-efficient and environmentally friendly solutions. One might think that district cooling is only a solution for areas with a very warm climate. However, based on the reported results of the surveyed studies, the number of operating district cooling systems has increased over the years, with the Scandinavian countries taking the lead in this market within European countries. Implementation of these systems concluded reduction in primary energy and electricity use, they also proved to be an environmentally efficient way., kommande

Production, management, use, and end-of-life of buildings has a large impact on climate change. Therefore, environmental targets are set to lower the greenhouse gas (GHG) emissions from the building sector. To reach these targets building regulation and voluntary environmental assessment methods (EAMs) that evaluate and certify the building's environmental impact are put forward as tools to push the building sector towards lower GHG emissions. In Sweden, building design is governed by building regulations and the dominant EAM is ‘Miljöbyggnad’ (MB) (“Environmental building”). Today, more than 1900 buildings have been certified by MB and it has influenced the building and property sector. In this chapter the potential impact MB and the linked Swedish building regulations have on building performance, energy use and GHG emissions, will be reviewed and discussed. The analysis investigates several of the MB’s indicators, evaluate to what degree EAMs can influence the design of the building and the energy system to lower the energy use and GHG emissions based on material choices. The analysis presents important aspects that may influence the design of the building and its energy system and what challenges and possibilities the indicators, criteria and regulations can have on buildings and climate change. In addition, some modification and suggestion for improvements are presented.

The increase in population and living standards, as well as global warming and heatwaves due to climate change, have created a challenge to meet the cooling demand in buildings. In this study, the cooling requirement for a multifamily building through simulations in a future city district in central-Sweden was determined. Different air supply set point strategies, window to floor ratio and building rotations were employed to minimize the cooling requirements. The building was modelled so as to meet the Nearly Zero Energy Building (NZEB) requirements. Window to floor ratio of 10% with a piecewise proportional controller for supply temperature was depicted as appropriate for the building. A 45° rotation of the building increased the cooling demand. The cooling demand of the building increased by employing the extreme climate condition, as a representative for future climate, with factors 3.8 and 6.4 for cooling set points 25°C and 27°C for window to floor ratio 10%. This implies the need for a resilient building to withstand future climate conditions. The requirement to update the climate files was also used for decision making in the design process and building regulation.

Samhällsbyggnadssektorn i Sverige står för en betydande andel av landets utsläpp av växthusgaser. I ett led att styra branschen mot en mer hållbar riktning har Boverket fått i uppdrag att underlätta införandet av klimatdeklaration vid nybyggnation. Redan i januari nästa år, 2022, föreslås att nya krav på redovisning av klimatdeklaration vid uppförande av nya byggnader införs för de som söker bygglov. Men vad innebär redovisning av klimatdeklaration?