Search

Background: Aseptic loosening remains a challenging problem after total hip arthroplasty. Accurate cup placement and supplementation of antioxidants in acetabular liners might reduce material failure rates. The aim of this study is to assess the effect of the cup position on the wear behaviour of UHMWPE-XE and UHMWPE-X liners in vivo using virtual radiographs. Methods: We conducted a prospective, randomized, controlled, multicenter trial. Clinical data of 372 probands were analyzed. Anteroposterior pelvic X-rays of 324 patients immediately postoperatively and after 1 and 5 years were evaluated by the RayMatch® analysis software regarding cup position and wear behaviour. Results: Mean cup anteversion was 20.3° (± 7.4) and inclination was 41.9° (± 7.0) postoperatively. 62.3% of all patients had an anteversion and inclination within the Lewinnek safe zone. Anterior and anterolateral approaches led to significantly higher cup anteversion compared to lateral approaches (27.3° ± 5.5; 20.9° ± 7.2; 17.5° ± 6.6; p < 0.001 and p = 0.001, respectively). Mean anteversion increased to 24.6° (± 8.0) after 1 year (p < 0.001). Only one revision occurred because of implant dislocation. Wear rates from UHMWPE-X and UHMWPE-XE did not differ significantly. Anteversion angles ≥ 25° correlated to increased polyethylene wear (23.7 µm/year ± 12.8 vs. 31.1 µm/year ± 22.8, p = 0.012) and this was amplified when inclination angles were ≥ 50° (23.6 µm/year ± 12.8 vs. 38.0 µm/year ± 22.7, p = 0.062). Conclusion: Anterior approaches lead to the highest inaccuracy of cup placement, but cup positioning outside the Lewinnek safe zone does not necessarily cause higher dislocation rates. Moreover, mean anteversion increased by approximately four degrees within the first year after operation, which is expected to be functional due to a regularization of pelvic tilt after intervention. Mid-term wear rates of UHMWPE-X and UHMWPE-XE liners are comparable, but steep cup positions lead to significantly increased polyethylene wear. In summary, a re-evaluation of target zones for intraoperative cup positioning might be considered. In the long-term reduced oxidative embrittlement could lead to superior wear behaviour of vitamin E-blended liners. [ABSTRACT FROM AUTHOR]

Background: Efficient digitization in medicine still is in its infancy but undeniably has great potential for current and future challenges in health care. Thus far, the rollout of medical apps has not resulted in widespread use of smartphones in the German health care sector-the reasons for this have not been clarified so far. Nevertheless, the lack of user involvement in the development process and content creation might contribute to low acceptance of these products., Objective: This study aims to outline an approach to involve medical expertise without any coding knowledge for developing medical app content and functions., Methods: An end user-operable backend was built. Its usability was evaluated using a usability evaluation test protocol. The results of the usability tests were evaluated by the app development team, and the usability test was repeated for optimizing backend usability. In total, 40 criteria to measure the ease of app usage were defined a priori. The usability test comprised 20 tasks that had to be fulfilled. Usability tasks were analyzed for completion, dropout, and test duration. Due to the COVID-19 pandemic, digital videoconferencing platforms (Zoom and QuickTime Player) were used to complete usability questionnaires. Finally, several backend-based apps for several specialties (infectiology, plastic and reconstructive surgery, and orthopedics) were developed by health care professionals as prototypes., Results: Initial usability testing was conducted with 5 participants (4 men and 1 woman; mean age 39.2, SD 5.97 years). All of them could complete the assigned backend tasks with only a few workflow interruptions and some minor errors. After usability optimization, the workflow completion time decreased from 5.03 minutes to 3.50 minutes, indicating a time saving. The basic backend structure was clear to all test users and the handling was intuitive to learn. Some minor errors in the backend occurred during the test rounds. The apps developed using the aforementioned approach are in clinical use as a proof of concept., Conclusions: Backends offering operability for medical professionals might have great potential for app development in the mobile health sector. Sophisticated and time-saving usability are pivotal for the acceptance of medical software, as illustrated by the backend-based apps presented herein, which are in clinical use as a proof of concept. Basic interventions are essential and sufficient for adequate usability optimization. Practicable, well-structured software usability evaluation is possible based on the usability evaluation test protocol., (©Florian Dittrich, Urs-Vito Albrecht, Julian Scherer, Sören L Becker, Stefan Landgraeber, David Alexander Back, Kai Fessmann, Marcel Haversath, Sascha Beck, Mona Abbara-Czardybon, Henning Quitmann, Anna Katharina Harren, Matthias Aitzetmüller, Marie Luise Klietz. Originally published in JMIR Formative Research (https://formative.jmir.org), 13.04.2023.)

Objective: Minimally invasive approaches are subject to controversy in orthopedic surgery. The aim of the current study was to compare the radiographic parameters between two minimally invasive approaches in total hip arthroplasty., Material and Methods: Between January 2018 and February 2019, the radiographic parameters of 80 patients undergoing total hip arthroplasty via minimally invasive approaches (DAA: n = 40; SuperPath® SP: n = 40) have been measured. The radiographic analysis was performed with digital software tool mediCad® (HECTEC™ GmbH, Landshut, Germany)., Results: Patients treated with DAA showed significantly higher inclination (SP: 39.7° ± 7.3° vs. DAA: 44.7° ± 5.3°) and significantly lower cup anteversion values (SP: 31.2° ± 7.9° vs. DAA: 27. 5° ± 5.3°, p < 0.001) than patients undergoing THA via SP postoperatively. The horizontal femoral offset was neither preoperatively nor postoperatively higher in DAA than in SP cohort (preoperative: p = 0.71, postoperative: p = 0.25) (preoperative: SP:37.2 mm ± 7.3 vs. DAA 38.2 mm ± 7.5; postoperative: SP: 38.0 mm ± 7.2 vs. DAA: 40.5 mm ± 7.0). At both times, the acetabular offset was significantly higher in DAA cohort than in SP cohort (preoperative: SP: 32.9 mm ± 5.9 vs. DAA: 36.8 mm ± 4.9; postoperative: SP: 28.9 mm ± 4.2 vs. DAA: 33.4 mm ± 3.8) (preoperative: 0.001; postoperative: p < 0.001). The vertical height was preoperatively and postoperatively not significantly higher in SP cohort than in DAA cohort (preoperative: SP: 16.1 mm ± 4.1 vs. DAA: 15.5 mm ± 4.9; postoperative: SP: 16.6 mm ± 4.6 vs. DAA: 16.1 mm ± 4.6) (preoperative: p = 0.77; postoperative: p = 0.58). The preoperatively existing leg length discrepancy of the affected leg could be compensated via surgery without showing significant differences between the two cohorts (preoperative: SP: -3.2 mm ± 5.4 vs. DAA: 1.9 mm ± 4.9; postoperative: SP: 1.5 mm ± 5.4 vs. DAA: 4.8 mm ± 5.6) (preoperative: p = 0.34; postoperative: p = 0.09)., Conclusion: The current study demonstrates suitable cup positioning and stem alignment in the coronal plane using minimal-invasive approaches DAA and Superpath®., (© 2022. The Author(s).)

When implanting osteosynthetic materials or orthopedic implants, the surface condition plays a decisive role for mid- to long-term osseointegration. BONIT ® , an electrochemically produced calcium phosphate (CaP) coating, has been used in the surface refinement of implants since 1995. More than 3.5 million coated implants have been successfully placed so far. BONIT ® has thus been able to demonstrate clinical success. However, due to its surface properties and solubility, and the resulting difficulty in culturing cells, there are no in vitro studies investigating its influence at the molecular level, particularly on bone metabolism. In a first step, the cells from a total of ten donors were seeded separately on four different surfaces: 1. a pure corundum-blasted titanium surface (CELLTex ® , CT), 2. CT with additional BONIT ® coating (CT + B), 3. a hydroxyapatite-blasted titanium surface (DUOTex ® , DT), 4. DT with additional BONIT ® coating (DT + B). In a second step, the cells were grown for 48 h. The proliferation behavior and differentiation potential of hMSCs were investigated at three consecutive time points (12 h, 24 h and 48 h) by quantifying the mRNA expression of ten important differentiation markers using quantitative real-time polymerase chain reaction (qRT-PCR). We were able to show that BONIT ® has an influence on the early proliferation and differentiation behavior of hMSCs in patients of all age groups. The additional BONIT ® coating on CELLTex ® or DUOTex ® led to a defined mRNA expression pattern for the investigated factors: a tendency towards a higher expression rate with coating present could be found for bone morphogenetic protein 2 (BMP2), osteopontin (OPN), osteocalcin (OC), receptor activator of NF-κB ligand (RANKL) and osteoprotegerin (OPG). A similar or lower expression rate was detected for runt-related transcription factor 2 (RUNX2), alpha-1 type I collagen (COL1A1), alkaline phosphatase (AP), osteonectin (ON) and insulin-like growth factor I (IGF1). We have developed a new method that allows the cultivation of human mesenchymal stromal cells (hMSCs) on the soluble coating BONIT ® for gene expression analysis. BONIT ® has a significant influence on the proliferation and differentiation behavior of human mesenchymal stroma cells. This study describes a defined gene expression pattern of bone metabolism that may help to understand the influence of this CaP coating on the early phase of implant osseointegration.

While autologous bone is still the gold standard for treatment of bone defects, its availability is limited. Sufficient numbers of mesenchymal stroma cells (MSC) may be an alternative. Small volumes of bone marrow aspirate (BMA) were harvested with two different needle systems comparing the yield and regenerative potency of the MSCs. BMA (10 mL) was aspirated from the posterior iliac crest of 12 patients with degenerative spinal disc disease using both needle systems in each patient: the Jamshidi needle (JAM) and on the contralateral side the Marrow Cellution ® Needle (AMC). Number of mononuclear cells (MNCs) and regeneration capacity (colony-forming unit/CFU) were determined. MSCs were characterized for surface markers and their differentiation into trilineages. There was no significant difference between the two harvesting needles regarding the quantity of MNCs in BMA: 5.2 ± 1.8 × 10 9 MNC/mL for AMC vs. 4.8 ± 2.5 × 10 9 MNC/mL for JAM, p = 0.182. The quantity of CFUs per ml BMA was similar for both groups: 3717 ± 5556 for AMC and 4305 ± 5507 for JAM ( p = 0.695). The potency of MSCs expressed as colony-forming potential per 10 6 MNC resulted in 0.98 ± 1.51 for AMC and 1.00 ± 0.96 for JAM ( p = 0.666). Regardless of the needle design, 10 mL bone marrow aspirate contains a sufficient number of about 40,000 MSCs that can be used to enhance bone healing.

Bone replacement materials have been successfully supplied for a long time. But there are cases, especially in critical sized bone defects, in which the therapy is not sufficient. Nowadays, there are multiple bone substitutes available. Autologous bone grafts remain the "gold standard" in bone regeneration. Yet, donor-site morbidity and the available amount of sufficient material are limitations for autologous bone grafting. This study aimed to provide information about the current status in research regarding bone substitutes. We report on the advantages and drawbacks of several bone substitutes. At the end, we discuss the current developments of combining ceramic substitutes with osteoinductive substances., Competing Interests: The authors declare that they have no conflict of interest., (Thieme. All rights reserved.)

Introduction: Inaccurate stem implantation can cause unsatisfactory offset reconstruction and may result in insufficient gluteal muscle function or aseptic loosening. In this study, stem alignment of a collarless straight tapered HA-coated stem was retrospectively analyzed during the learning phase of the direct anterior approach (DAA) for primary total hip arthroplasty (THA)., Material and Methods: From Jan 2013 to Jun 2015, a total of 93 cementless THA were implanted in patients with unilateral coxarthrosis via the DAA in a two surgeon setting using the Corail ® or Trendhip ® stem (DePuy Synthes or Aesculap). Varus(+)/Valgus(-) stem alignment was analyzed in postoperative anteroposterior pelvic radiographs. Effects on femoral offset reconstruction and correlation to patient's individual clinical and radiological parameters were evaluated., Results: 55 stems were implanted in varus (59%), 32 in neutral (34%) and 6 in valgus alignment (7%). Mean stem alignment in varus position was + 2.2° (SD ± 1.4°). Varus alignment was associated with male gender and preoperative coxa vara deformity: low CCD, high femoral offset and long thigh neck (p ≤ 0.001). Alignment was not correlated to femoral offset restoration, BMI or leg length difference. Mean cup inclination was 44° (SD ± 4.7°) and 90% matched the coronal Lewinnek safe zone., Conclusion: In the learning curve, the DAA can be associated with a high incidence of varus stem alignment when using a straight tapered stem, especially in men with coxa vara deformity: low CCD, high femoral offset and long thigh neck. An insufficient capsule release makes femur exposure more difficult and might be an additional factor for this finding. We recommend intraoperative X-ray in the learning phase of the DAA to verify correct implant positioning and to adjust offset options.

Background: The recently described 'critical trochanter angle' (CTA) is a novel parameter in the preoperative risk assessment of stem malalignment in total hip arthroplasty. As its reproducibility needs to be evaluated, the given study aims to investigate intra- and interobserver reliability. It is hypothesized that both analyses justify the clinical use of the CTA., Methods: A total of 100 pelvic radiographs obtained prior to total hip arthroplasty were retrospectively reviewed by four observers with different levels of clinical experience. The CTA was measured twice by each observer at different occasions in the previously described technique. Intra- and interobserver reliability was evaluated using intraclass correlation coefficients (ICC) with confidence intervals (CI) and the Bland-Altman approach., Results: The mean CTA in both measuring sequences was 20.58° and 20.78°. The observers' means ranged from 17.76° to 25.23°. Intraobserver reliability showed a mean difference of less than 0.5° for all four observers (95% limit of agreement: - 7.70-6.70). Intraobserver ICCs ranged from 0.92 to 0.99 (CI 0.88-0.99). For interobserver variation analysis, ICCs of 0.83 (CI 0.67-0.90) and 0.85 (CI 0.68-0.92) were calculated., Conclusion: Analyses concerning intra- and interobserver reliability in the assessment of the CTA showed 'very good' and 'good' results, respectively. In view of these findings, the use of the CTA as an additional preoperative parameter to assess the risk of intraoperative stem malalignment seems to be justified.

Background: Progressive oxidation of highly cross-linked ultra-high molecular weight (UHMPWE-X) liners is considered to be a risk factor for material failure in THA. Antioxidants such as vitamin E (alpha-tocopherol) (UHMWPE-XE) were supplemented into the latest generation of polyethylene liners. To prevent inhomogenous vitamin E distribution within the polymer, blending was established as an alternative manufacturing process to diffusion. The purpose of the present study was to investigate the in vivo wear behavior of UHMWPE-XE in comparison with conventional UHMWPE-X liners using virtual CAD-based radiographs., Methods: Until now, 94 patients from a prospective, randomized, controlled, multicenter study were reviewed at 5-year follow-up. Of these, 51 (54%) received UHMWPE-XE and 43 (46%) UHMWPE-X liners. Anteroposterior pelvic radiographs were made immediately after surgery and at 1 and 5 years postoperatively. The radiographs were analyzed using the observer-independent analysis software RayMatch ® (Raylytic GmbH, Leipzig, Germany)., Results: The mean wear rate was measured to be 23.6 μm/year (SD 13.7; range 0.7-71.8 μm). There were no significant differences between the two cohorts (UHMWPE-X: 23.2 μm/year vs. UHMWPE-XE: 24.0 μm/year, p = 0.73). Cup anteversion significantly changed within the 1st year after implantation independent from the type of polyethylene liner [UHMWPE-X: 18.2-23.9° (p = 0.0001); UHMWPE-XE: 21.0-25.5° (p = 0.002)]. No further significant changes of cup anteversion in both groups were found between year 1 and 5 after implantation [UHMWPE-X (p = 0.46); UHMWPE-XE (p = 0.56)]., Conclusion: The present study demonstrates that the addition of vitamin E does not adversely affect the midterm wear behavior of UHMWPE-X. The antioxidative benefit of vitamin E is expected to become evident in long-term follow-up. Cup anteversion increment by 5° within the 1st year is likely a result of the released hip flexion contracture resulting in an enhanced posterior pelvic tilt. Therefore, a reassessment of target values in acetabular cup placement might be considered.

Background: Despite continuous technical improvements, polyethylene wear debris induced periprosthetic osteolysis remains the main cause for failure of hip arthroplasty. Progressive oxidation of polyethylene was identified as another risk factor for material failure. To overcome this problem, antioxidants such as vitamin E (alpha-tocopherol) were supplemented by diffusion into the latest generation of polyethylene liners., Objective: The purpose of the present study was to investigate the clinical outcome of patients treated with vitamin E blended highly cross-linked ultra-high molecular weight polyethylene liners (UHMWPE-XE) in comparison with conventional UHMWPE‑X liners by evaluating patient-reported outcome measures (PROM's) at 3‑year follow-up., Methods: A total of 143 patients were recruited into this prospective, randomized trial in our academic center. Three years after implantation, 101 patients were examined in the outpatient clinic for follow-up. Of these, 51 (50.5%) received UHMWPE-XE and 50 (49.5%) UHMWPE‑X liners. Clinical outcome was evaluated using Harris-Hip-Score (HHS) UCLA-Score and Hip Disability and Osteoarthritis Outcome Score (HOOS)., Results: There was a significant improvement in all PROM's at one- and three-year follow-up compared to the status before implantation. PROM's did not differ significantly between the first and third year follow-up. Both liner groups showed an equal clinical outcome., Conclusion: The present study demonstrates that the supplementation of vitamin E to polyethylene liners is reliable and safe without showing higher complication rates compared with conventional polyethylene liners. The shortterm clinical outcome of vitamin E-blended (UHMWPE‑XE) is equivalent to those of conventional highly cross-linked polyethylene liners.

Background: Lapidus arthrodesis is an established treatment option for severe hallux valgus deformity especially in patients suffering from instability of the first tarsometatarsal joint. Surgery related metatarsalgia is known to be associated with persistent elevation of the first ray after realignment surgery. Nevertheless, detailed information on ideal positioning of the first ray in Lapidus surgery is missing so far. This study was designed to determine any correlations between radiographic and pedobarographic outcome following the Lapidus procedure with regard to clinical outcome and the occurrence of metatarsalgia., Methods: Thirty feet (28 patients) after Lapidus surgery were available for follow-up at 42.5±21.0 months. All subjects had radiographic and pedobarographic evaluation of the operated foot and patient satisfaction was recorded using questionnaires., Results: Metatarsalgia was associated with a poorer outcome in FADI and AOFAS scores (p<0.005). A lateral shift of plantar pressure distribution to the third metatarsal head in these cases could be observed. Although Lapidus surgery resulted in significant shortening of the first metatarsal, no correlation to the occurrence of metatarsalgia was detectable. Likewise, axial plane malalignment showed no influence, whereas elevation of the first ray was highly correlated to surgery related metatarsalgia (p=0.007). Subjects suffering from metatarsalgia had a higher BMI (body mass index), but its effect on metatarsalgia turned out not to be significant (p=0.090)., Conclusion: In Lapidus surgery realignment of the first metatarsal in the sagittal plane seems to be decisive for good clinical outcome. Failing to plantarflex the arthrodesis resulted in a lateral shift of plantar loading with overload of the lesser metatarsals and the occurrence of metatarsalgia., (Copyright © 2020. Published by Elsevier Ltd.)

During total joint replacement, high concentrations of mesenchymal stromal cells (MSCs) are released at the implantation site. They can be found in cell-tissue composites (CTC) that are regularly removed by surgical suction. A surgical vacuum suction handle was filled with bone substitute granules, acting as a filter allowing us to harvest CTC. The purpose of this study was to investigate the osteopromotive potential of CTC trapped in the bone substitute filter material during surgical suction. In the course of 10 elective total hip and knee replacement surgeries, β -tricalcium-phosphate (TCP) and cancellous allograft (Allo) were enriched with CTC by vacuum suction. Mononuclear cells (MNC) were isolated from the CTC and investigated towards cell proliferation and colony forming unit (CFU) formation. Furthermore, MSC surface markers, trilineage differentiation potential and the presence of defined cytokines were examined. Comparable amounts of MNC and CFUs were detected in both CTCs and characterized as MSC‱ of MNC with 9.8 ± 10.7‱ for the TCP and 12.8 ± 10.2‱ for the Allo ( p = 0.550). CTCs in both filter materials contain cytokines for stimulation of cell proliferation and differentiation (EGF, PDGF-AA, angiogenin, osteopontin). CTC trapped in synthetic (TCP) and natural (Allo) bone substitute filters during surgical suction in the course of a joint replacement procedure include relevant numbers of MSCs and cytokines qualified for bone regeneration.

Handball is one of the most traumatic sports. The knee is the most commonly injured joint. To prevent knee injuries, optimal functional knee stability is of great importance. Nevertheless, there is still no consensus about objective criteria for knee function. Depending on playing class, injury rates seem to differ. The purpose of this study was to evaluate knee function in handball depending on playing class and to establish reference data for functional knee stability. 261 handball players (25.1±5.8 years) performed a functional test including two- and one-legged stability assessments, jump tests, speed and agility analysis. Except for balance, differences between playing classes were detected in all tests with superior performance of high-class players (Germany's 1st ("Oberliga") and 2nd ("Verbandsliga") non-elite playing class). High-class players achieved significant better results in jumping height (p≤0.011-0.029), relative power per body weight in the two-legged counter movement jump (p≤0.023) and speed and agility tests (p≤0.001). This study illustrates the relevance of playing class specific screening. Sports and playing class-specific databases will help to identify individual deficits and strengths in order to prevent injury and increase performance. Moreover, objective criteria for return to sports can be established., Competing Interests: The authors declare that they have no conflict of interest., (© Georg Thieme Verlag KG Stuttgart · New York.)

Fractures and osteotomies are characterized by a structural discontinuity of the affected bone with formation of a gap. If bone healing does not lead to an osseous bridging of the fragments within a time period of 6 months a nonunion (pseudarthrosis) occurs. In this stage spontaneous bone healing is unlikely in the future without any intervention. Pseudarthrosis is classified into hypertrophic and atrophic types. Moreover, the differentiation between aseptic and septic conditions, the size of the defect, the local blood supply and the mechanical stability are crucial for treatment planning. The type of pseudarthrosis and the accompanying comorbidities can be classified in scoring systems and influence the selection of the treatment procedure. The operative principles aim at the vitalization of atrophic bone parts, achieving sufficient stabilization and cures the infection, whereas nonoperative measures are primarily supportive measures. The foundation of successful treatment is the minimization of individual risk profiles and sufficient patient compliance.

Background: Until today, a reliable diagnostic discrimination between periprosthetic joint infections (PJI) and aseptic failure (AF) after total joint arthroplasty (TJA) remains challenging. Nearly all recent research focused on synovial markers to be elevated in PJI rather than in AF patients. In this study, synovial bone sialoprotein (sBSP) was investigated in PJI and AF arthroplasty patients before revision surgery., Methods: sBSP and C-reactive protein (CRP) were determined in synovial fluid samples of PJI (n = 13) patients fulfilling the MSIS criteria and AF (n = 25) patients. Beside descriptive analysis and comparison, computed statistics determined the area under the receiver operating characteristics curve (AUC) to evaluate the discrimination ability of the tested synovial markers., Results: In patients with PJI according to the MSIS criteria, mean sBSP was significantly lower: 14.8 ng/ml (95% CI 5.5-24.1) vs. 38.2 ng/ml in the AF group (95% CI 31.1-45.3), p ≤ 0.001. Conversely, mean sCRP was significantly higher in PJI patients: 8.4 μg/ml (95% CI 0-17.2) vs. 1.8 μg/ml in the AF group (95% CI 0.9-2.8), p = 0.032. The AUC of sCRP in PJI patients was 0.71. The AUC of sBSP in AF revision arthroplasty patients was 0.83. The detection of osteolyses was not associated with higher sBSP concentrations., Conclusions: Considering the MSIS criteria, significantly higher sBSP concentrations were found in synovial fluid samples of AF compared to PJI patients. sCRP showed only fair, sBSP good discrimination potential. If it is not clear whether PJI is present or not, sBSP may be considered as an add-on synovial marker.

Background: Since a "gold-standard" is missing, diagnosing periprosthetic joint infection (PJI) remains a challenge in orthopedic surgery. The purpose of this study was to evaluate the accuracy of serum and synovial fluid Procalcitonin (S-PCT and SF-PCT) as a diagnostic parameter and to compare it to the biomarkers recommended in the 2018 Definition of periprosthetic hip and knee infection., Methods: Between August 2018 and July 2019, a prospective cohort study was conducted in 70 patients with painful hip, shoulder and knee arthroplasty. Besides medical history, clinical and laboratory data was gathered. PJI was diagnosed based on the 2018 Definition of periprosthetic hip and knee infection. Preoperative blood and synovial joint fluid were taken for PCT measurement. S-PCT and SF-PCT levels were measured using standard quantitative PCT enzyme immunoassays., Results: Twenty three patients (33%) were classified as the PJI group and fourty seven patient (67%) as the aseptic group. The mean levels of S-PCT were significantly (p <  0.001) higher in the PJI group than those in the aseptic group (PJI 0.05 ± 0.21 ng/mL (0.0-1.03) vs. aseptic 0.02 ± 0.03 ng/mL (0.0-0.18)). In synovial fluid, the mean PCT values in the aseptic group were significantly higher (p <  0.001) than those of PJI group (PJI 2.7 ± 1.4 ng/mL (0.53-9.7) vs. aseptic 8.7 ± 2.5 ng/mL (0.25-87.9)). S- PCT, with a cut-off level of 0.5 ng/mL, had a sensitivity of 13.0% and a specificity of 91.0%. SF-PCT, with a cut-off level of 5.0 ng/mL, had a sensitivity of 13.0% and a specificity of 52.0%., Conclusion: S-PCT and SF-PCT appeared to be no reliable biomarkers in the differential diagnosis of PJI from aseptic loosening in total joint arthroplasty.

Background: Core decompression is a common surgical technique to treat osteonecrosis of the femoral head. The aim of this study is to evaluate the effect of the parameters "age" and "sex" on the outcome of this type of treatment., Methods: A prospective cohort study was performed. Eighty-six osteonecrotic hips with a mean follow-up of 32.5 months (± 24.8) after advanced core decompression were analysed regarding age- and sex-dependent treatment failure. Additionally, the modified Harris Hip Score and Numeric Rating Scale were compared regarding the parameters age and sex., Results: The mean hip survival of the male participants was 51.3 months (39.4% treatment failure), whereas females presented a longer, thus not significant, mean survival of 61.4 months (30% therapy failure; p = 0.48). The further evaluation revealed significantly better survival in the patients aged < 40 years (mean survival 66.09 months, 16% treatment failure) in comparison to those aged ≥ 40 years (mean survival 50.14 months, 46% therapy failure; p = 0.03). The modified Harris Hip Score and Numeric Rating Scale results of patients whose treatment did not fail during the study period were similar, irrespective of the patient's sex or age., Conclusions: The study shows that the number of therapy failures is significantly higher in older patients, with 40 years of age marking the borderline. Patients' sex does not seem to affect the outcome of treatment, and postoperative clinical scores appear to be identical with individuals not affected by therapy failure. Since age and sex are unalterable parameters, the study helps to provide valuable predictions regarding the chances of long-term hip survival after treatment of osteonecrosis.

Background: During joint replacement, surgical vacuum suction guarantees a sufficient overview on the situs. We assume high concentrations of mesenchymal stromal cells (MSCs) on surgical vacuum filters. We compared the in vitro proliferative and differentiation potency of cells from the following: (i) bone marrow (BM), (ii) cancellous bone (CB), (iii) vacuum filter (VF), and (iv) cell saver filtrate reservoir (SF) in 32 patients undergoing elective total hip replacement., Methods: Mononuclear cells (MNC) were isolated, and cell proliferation and colony-forming units (CFU) were measured. Adherent cells were characterized by flow cytometry for MSC surface markers. Cells were incubated with osteogenic, adipogenic, and chondrogenic stimuli. Cells were cytochemically stained and osteoblastic expression (RUNX-2, ALP, and BMP-2) investigated via qPCR., Results: Dependent on the source, initial MNC amount as well as CFU number was significantly different whereas generation time did not vary significantly. CFU numbers from VF were superior to those from SR, BM, and CB. The resulting amount of MSC from the respective source was highest in the vacuum filter followed by reservoir, aspirate, and cancellous bone. Cells from all groups could be differentiated into the three mesenchymal lines demonstrating their stemness nature. However, gene expression of osteoblastic markers did not differ significantly between the groups., Conclusion: We conclude that surgical vacuum filters are able to concentrate tissue with relevant amounts of MSCs. A new potent source of autologous regeneration material with clinical significance is identified. Further clinical studies have to elucidate the regenerative potential of this material in an autologous setting.

Introduction: Stem malalignment can affect offset reconstruction and may result in gluteal muscle insufficiency. In this retrospective study, a novel geometric angle named 'critical trochanter angle' (CTA) is described and investigated towards the risk of malposition of a collarless straight tapered hydroxyapatite-coated stem in primary total hip arthroplasty (THA)., Material and Methods: A total of 100 cementless THA were implanted in patients with unilateral coxarthrosis via the direct anterior (n = 50) or direct lateral Hardinge approach (n = 50) in a two surgeon setting using the Corail® or Trendhip® stem (DePuy Synthes or Aesculap). Stem alignment was analysed in postoperative AP pelvic radiographs and correlated to the CTA: the angle crest was defined by the intersection of the femoral shaft and neck axis and the angle was measured between the shaft axis and a leg intersecting the vertex between the lateral and superoposterior facet of the trochanter., Results: Forty-seven stems were implanted in varus (≥ + 1°), 42 in neutral (< + 1°/> - 1°) and 11 in valgus position (≤ - 1°). The mean critical trochanter angle was 25.0° (SD ± 7.5°), and there was a negative and statistically significant correlation to stem alignment (r = - 0.52; p ≤ 0.001) independent from the surgical approach. For stem malposition of 2° and above (n = 23), mean CTA was 17.2° for varus (n = 20) and 31.6° for valgus (n = 3). A CTA lesser or equal to 22.75° had a sensitivity of 90% and specificity of 80% for varus stem position of 2° or greater. Specificity raised to 100% with a cutoff CTA of 12.5° or lesser., Conclusion: Varus stem alignment in THA is associated with coxa vara deformity and a radiological low CTA. In preoperative planning, the critical trochanter angle can help to evaluate the risk for intraoperative stem malpositioning. If navigation or robotic assistance is not available when using this stem design, we recommend an intraoperative x-ray to verify correct implant positioning in patients with a CTA under 20° or above 30°.

Osteonecrosis of the femoral head (ONFH) and CAM-type femoroacetabular impingement (FAI) present two different pathologies of the hip joint. The aim of this study is to describe the prevalence of CAM-FAI in a collective of ONFH hips and to evaluate its influence on ONFH therapy outcome. A cohort of 86 ONFH hips with a mean follow-up of 46.7 months (±20.5) after advanced core decompression (ACD) was evaluated regarding CAM deformity by measuring the alpha angle (α) and head-neck offset. The influence of CAM-type FAI was investigated using the Kaplan-Meier estimator and the Cox regression model. The mean α was 60.4° (±13.8) with 41 hips (47.7%) being ≥60°. The mean head-neck offset was 4.5 mm (±3.2), with 78 hips (90.7%) being ≤9 mm. Survival analysis indicated noticeably better ACD results for α < 60° versus α ≥ 60° (p = 0.07). Treatment failure within the first 2 years was statistically estimated as 27.7% for α < 60° versus 40.7% for α ≥ 60°: The hazard ratio for α ≥ 60° was 1.94. Head-neck offset-dependent survival showed better, though not significant, results for offset >9 mm (p = 0.38, hazard ratio 1.89 for offsets ≤9 mm). The prevalence of CAM-type deformity is greatly increased in patients with concomitant ONFH. There is a strong indication that CAM-type FAI has a negative influence on ONFH therapy outcome. The risk that ONFH treatment will fail seems to be twice as high for α ≥ 60° as for α < 60°. We recommend cotreatment of pathological head-neck offset in patients with ONFH., (© 2019 John Wiley & Sons, Ltd.)

Purpose: Aseptic loosening in total joint replacement due to insufficient osteointegration is an unsolved problem in orthopaedics. The purpose of the study is to obtain a picture of the initial protein adsorption layer on femoral endoprosthetic surfaces as the key to the initiation of osseointegration., Experimental Design: The paper describes the first study of femoral stem explants from patients for proteome analysis of the primary protein layer. After 2 min in situ, the stems are explanted and frozen in liquid nitrogen. Proteins are eluted under reducing conditions and analyzed by LC-MS/MS., Results: After exclusion of proteins identified by a single peptide, the implant proteome is found to consist of 2802 unique proteins. Of these, 77% are of intracellular origin, 9% are derived from the plasma proteome, 8% from the bone proteome, and four proteins with highest specificity score could be assigned to the bone marrow proteome (transcriptome). The most abundant protein in the adsorbed total protein layer is hemoglobin (8-11%) followed by serum albumin (3.6-6%)., Conclusions: A detailed knowledge of the initial protein film deposited onto the implants, as demonstrated here for the first time, may help to understand and predict the response of the osseous microenvironment to implant surfaces., (© 2019 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Purpose: Osteoporotc fractures with posterior wall injury are commonly treated with a pedicle srcrew instrumentation (PSI) or a ballonkyphoplasty (BKP). A predictor for complications for these patients is the American Society of Anesthesiologists (ASA) class. Clinical results in ASA II/III patients who underwent BKP and PSI due to OF were evaluated to find the optimal treatment regimen., Materials and Methods: In a retrospective study design, ASA Class II and III patients with OF type OF 2 and OF 3 according to the German Society of Orthopedics and Trauma Surgery classification who underwent surgery between 2011 and 2016 were enrolled. Perioperative data such as time of surgery, cement leakage, adjacent level fractures, screw loosening, wound infections, and segmental kyphosis correction were measured and a statistical analysis was conducted., Results: Ninety-nine patients met the inclusion criteria, 17 were classified as ASA II and 82 patients were classified as ASA III. Twenty-eight individuals were treated by PSI, whereas 71 underwent BKP. Not only a longer average operation (120 min) and hospital stay (21 days) were documented in the PSI group but also a better kyphosis correction (7.5°). In comparison, the BKP group required an average operation time of 35.5 min with a mean kyphosis correction of 2.1°. A statistical analysis revealed the surgical procedure and not the ASA class to be a relevant factor for complication and revision surgery., Conclusions: BKP is a safe and effective therapy including also fractures with posterior wall defects while PSI showed advantages in restoring the sagittal realignment but higher complication and revision risk., Competing Interests: There are no conflicts of interest.

Purpose: Expandable titanium transforaminal lumbar interbody fusion (TLIF) devices are a relatively new group of implants allowing restoration of lumbar lordosis (LL) and thus improvement of sagittal alignment. The purpose of our study is to compare clinical and radiological results of two different expandable TLIF devices., Materials and Methods: In a retrospective study, patients who underwent TLIF surgery with a banana-shaped or straight TLIF cage in our spine center were analyzed. Primary outcome was change of disc height (DH), segmental lordosis angle (SLA), and lumbar lordotic angle (LLA). Moreover, basic patients parameters and cage subsidence were evaluated., Results: Sixty-one patients were studied (33 banana-shaped and 28 straight cages). DH changed in the banana group from 4.8 mm (standard deviation SD 2.5) to 10.4 (SD 2.4) and in the straight cage group from 6.2 mm (SD 2.5) to 9.6 mm (SD 1.7). The difference was statistically significant ( P = 0.03). In addition, SLA correction was higher in the banana group with 5.8° (SD 5.0)-3.7° (SD 3.6), but not significant. LLA improved in the straight group with 5.2 (SD 6.4) compared to 3.7° (SD 5.8) in the banana group. We found subsidence in four patients (6.6%) in the banana-shaped group and nine cases (14.8%) in the other group., Conclusions: Expandable titanium implants show similar improvements in restoring segmental and global lordosis. Banana-shaped expandable cages offer higher potency restoring the intervertebral DH and show less rates of subsidence compared to straight expandable cages., Competing Interests: There are no conflicts of interest.

Introduction: Restoration of the physiological biomechanical principles of the hip is crucial in total hip replacement. The aim of this study was to compare an arthroplasty system with different offset options (a: Exeter ® ) with a dual-modular stem (b: Profemur Xm ® )., Materials and Methods: A local and an inertial coordinate system were used to assist the description of the components' assembly in the prosthesis. A resection line of the femoral head in standard position was added to the arthroplasties and geometric parameters were measured. The outcomes of 93 patients were clinically evaluated (a: n = 50, b: n = 43). Preoperative planning was compared to postoperative radiographs (femoral offset, leg-length), and clinical scores (HHS, WOMAC, total range of motion) were assessed preoperatively, and then 1 and 2 years after surgery., Results: The Exeter ® offers an offset range from 32.1 to 56.9 mm and the Profemur Xm ® a range from 29.3 to 55.3 mm. The leg-length variability of the Profemur Xm ® has a range of 25.9 mm, the Exeter ® a range of 13.7 mm. The Profemur Xm ® offers more possible combinations of offset and leg-length reconstruction. The neck-stem angles of the Exeter ® range from 125.2° to 126.3°, of the Profemur Xm ® from 127.2° to 142.6°. There was no statistically significant difference in clinical outcome and radiological parameters., Conclusions: We conclude that both stems offer a wide range of options for anatomical reconstruction of the hip resulting in similarly good clinical results. The Profemur Xm ® stem has advantages for the reconstruction of hips that deviate from standard anatomy but has the drawback of additional corrosive wear at the stem/neck interface.

BACKGROUND Revitalizing the necrotic subchondral bone and preserving the intact cartilage layer by retrograde drilling is the preferred option for treatment of undetached osteochondral lesions of the talus (OLT). We assessed the effectiveness of Endoscopic Core Decompression (ECD) in treatment of OLT. MATERIAL AND METHODS Seven patients with an undetached OLT of the medial talar dome underwent surgical treatment using an arthroscopically-guided transtalar drill meatus for core decompression of the lesion. Under endoscopic visualization the OLT was completely debrided while preserving the cartilage layer covering the defect. The drill tunnel and debrided OLT were filled using an injectable bone graft substitute. Various clinical scores, radiographic imaging, and MRI were evaluated after a mean follow-up of 24.1 months. RESULTS The American Orthopedic Foot and Ankle Society Score significantly improved from 71.0±2.4 to 90.3±5.9, and the Foot and Ankle Disability Index improved from 71.8±11.1 to 91.7±4.8. Radiographically, we observed good bone remodelling of the medial talar dome contour within 3 months. In MRI, an alteration of the bony signal of the drill tunnel and the excised OLT remained for more than 12 months. CONCLUSIONS First follow-up results for the surgical technique described in this study are highly promising for treatment of undetached stable OLT grade II or transitional stage II-III according to the Pritsch classification. Even lesions larger than 150 mm2 showed good clinical scores, with full restoration of the medial talar dome contour in radiographic imaging.