Search

Manganese-based materials have tremendous potential to become the next-generation lithium-ion cathode as they are Earth abundant, low cost and stable. Here we show how the mobility of manganese cations can be used to obtain a unique nanosized microstructure in large-particle-sized cathode materials with enhanced electrochemical properties. By combining atomic-resolution scanning transmission electron microscopy, four-dimensional scanning electron nanodiffraction and in situ X-ray diffraction, we show that when a partially delithiated, high-manganese-content, disordered rocksalt cathode is slightly heated, it forms a nanomosaic of partially ordered spinel domains of 3-7 nm in size, which impinge on each other at antiphase boundaries. The short coherence length of these domains removes the detrimental two-phase lithiation reaction present near 3 V in a regular spinel and turns it into a solid solution. This nanodomain structure enables good rate performance and delivers 200 mAh g-1 discharge capacity in a (partially) disordered material with an average primary particle size of ∼5 µm. The work not only expands the synthesis strategies available for developing high-performance Earth-abundant manganese-based cathodes but also offers structural insights into the ability to nanoengineer spinel-like phases.

Relating the synthesis conditions of materials to their functional performance has long been an experience-based trial-and-error process. However, this methodology is not always efficient in identifying an appropriate protocol and can lead to overlooked opportunities for the performance optimization of materials through simple modifications of the synthesis process. In this work, the authors systematically track the structural evolution in the synthesis of a representative disordered rock salt (a promising next-generation Li-ion cathode material) at the scale of both the long-range crystal structure and the short-range atomic structure using various in situ and ex situ techniques, including transmission electron microscopy, X-ray diffraction, and pair distribution function analysis. An optimization strategy is proposed for the synthesis protocol, leading to a remarkably enhanced capacity (specific energy) of 313 mAh g−1 (987 Wh kg−1) at a low rate (20 mA g−1), with a capacity of more than 140 mAh g−1 retained even at a very high cycling rate of 2000 mA g−1. This strategy is further rationalized using ab initio calculations, and important opportunities for synthetic optimization demonstrated in this study are highlighted.

The discovery of mechanically soft solid‐state materials with fast Mg‐ion conduction is crucial for the development of solid‐state magnesium batteries. In this paper, novel magnesium gallium halide compounds are reported that achieve high ionic conductivity of 0.47 mS cm−1 at room temperature. These Mg‐ion conductors obtained by ball milling Mg and Ga salts exhibit clay‐like mechanical properties, enabling intimate contact at the electrode–electrolyte interface during battery cycling. With a combination of experimental and computational analysis, this study identifies that the soft‐clay formation is induced by partial anion exchange during milling. This partial anion exchange creates undercoordinated magnesium ions in a chlorine‐rich environment, yielding fast Mg‐ion conduction. This work demonstrates the potential of clay‐like halide electrolytes for all‐solid‐state magnesium batteries, with possible further extension to other multivalent battery systems. [ABSTRACT FROM AUTHOR]

Li‐excess disordered rocksalts (DRXs) are emerging as promising cathode materials for Li‐ion batteries due to their ability to use earth‐abundant transition metals. In this work, a new strategy based on partial Li deficiency engineering is introduced to optimize the overall electrochemical performance of DRX cathodes. Specifically, by using Mn‐based DRX as a proof‐of‐concept, it is demonstrated that the introduction of cation vacancies during synthesis (e.g., Li1.3‐xMn2+0.4‐xMn3+xNb0.3O1.6F0.4, x = 0, 0.2, and 0.4) improves both the discharge capacity and rate performance due to the more favored short‐range order in the presence of Mn3+. Density functional theory calculations and Monte Carlo simulations, in combination with spectroscopic tools, reveal that introducing 10% vacancies (Li1.1Mn2+0.2Mn3+0.2Nb0.3O1.6F0.4) enables both Mn2+/Mn3+ redox and excellent Li percolation. However, a more aggressive vacancy doping (e.g., 20% vacancies in Li0.9Mn3+0.4Nb0.3O1.6F0.4) impairs performance because it induces phase separation between an Mn‐rich and a Li‐rich phase. [ABSTRACT FROM AUTHOR]

Mn-rich disordered rocksalt materials with Li-excess (DRX) materials have emerged as a promising class of earth-abundant and energy-dense next-generation cathode materials for lithium-ion batteries. Recently, an electrochemical transformation to a spinel-like "δ" phase has been reported in Mn-rich DRX materials, with improved capacity, rate capability, and cycling stability compared with previous DRX compositions. However, this transformation unfolds slowly over the course of cycling, complicating the development and understanding of these materials. In this work, it is reported that the transformation of Mn-rich DRX materials to the promising δ phase can be promoted to occur much more rapidly by electrochemical pulsing at elevated temperature, rate, and voltage. To extend this concept, micron-sized single-crystal DRX particles are also transformed to the δ phase by the same method, possessing greatly improved cycling stability in the first demonstration of cycling for large, single-crystal DRX particles. To shed light on the formation and specific structure of the δ phase, X-ray diffraction, scanning electron nanodiffraction (SEND) and atomic resolution STEM-HAADF are used to reveal a nanodomain spinel structure with minimal remnant disorder., (© 2024 The Author(s). Advanced Materials published by Wiley‐VCH GmbH.)