Search

Mucopolysaccharidosis (MPS) I is a lysosomal storage disorder characterized by deficient alpha-l-iduronidase activity, leading to abnormal accumulation of glycosaminoglycans (GAGs) in cells and tissues. Synovial joint disease is prevalent and significantly reduces patient quality of life. There is a strong clinical need for improved treatment approaches that specifically target joint tissues; however, their development is hampered by poor understanding of underlying disease pathophysiology, including how pathological changes to component tissues contribute to overall joint dysfunction. Ligaments and tendons, in particular, have received very little attention, despite the critical roles of these tissues in joint stability and biomechanical function. The goal of this study was to leverage the naturally canine model to undertake functional and structural assessments of the anterior (cranial) cruciate ligament (CCL) and Achilles tendon in MPS I. Tissues were obtained postmortem from 12-month-old MPS I and control dogs and tested to failure in uniaxial tension. Both CCLs and Achilles tendons from MPS I animals exhibited significantly lower stiffness and failure properties compared to those from healthy controls. Histological examination revealed multiple pathological abnormalities, including collagen fiber disorganization, increased cellularity and vascularity, and elevated GAG content in both tissues. Clinically, animals exhibited mobility deficits, including abnormal gait, which was associated with hyperextensibility of the stifle and hock joints. These findings demonstrate that pathological changes to both ligaments and tendons contribute to abnormal joint function in MPS I, and suggest that effective clinical management of joint disease in patients should incorporate treatments targeting these tissues., (© 2024 The Authors. Journal of Orthopaedic Research® published by Wiley Periodicals LLC on behalf of Orthopaedic Research Society.)

Controlled degradation of biodegradable poly-lactic-co-glycolic acid (PLGA) trauma implants may increase interfragmentary loading which is known to accelerate fracture healing. Additive manufacturing allows us to tune the mechanical properties of PLGA scaffolds; however, little is known about this novel approach. The purpose of this study was to use in vitro and in vivo models to determine the degradative kinetics of additively manufactured test coupons fabricated with PLGA. We hypothesized that 1) increases in infill density would lead to improved initial mechanical properties, and 2) loss of mechanical properties would be constant as a function of time, regardless of implant design. Porous and solid test coupons were fabricated using 85:15 PLGA filament. Coupons were either incubated in serum or implanted subcutaneously in rats for up to 16 weeks. Samples were tested in tension, compression, torsion, and bending on a universal test frame. Variables of interest included, but were not limited to: stiffness, and ultimate force for each unique test. Infill density was the driving factor in test coupon mechanical properties, whereas differences in lattice architecture led to minimal changes. We observed moderate levels of degradation after 8 weeks, and significant decreases for all specimens after 16 weeks. Results from this study suggest substantial degradation of 3-D printed PLGA implants occurs during the 8- to 16-week window, which may be desirable for bone fracture repair applications. This study represents initial findings that will help us better understand the complicated interactions between overall implant design, porosity, and implant biodegradation., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

The biological mechanisms regulating tenocyte differentiation and morphological maturation have not been well-established, partly due to the lack of reliable in vitro systems that produce highly aligned collagenous tissues. In this study, we developed a scaffold-free, three-dimensional (3D) tendon culture system using mouse tendon cells in a differentially adherent growth channel. Transforming Growth Factor-β (TGFβ) signaling is involved in various biological processes in the tendon, regulating tendon cell fate, recruitment and maintenance of tenocytes, and matrix organization. This known function of TGFβ signaling in tendon prompted us to utilize TGFβ1 to induce tendon-like structures in 3D tendon constructs. TGFβ1 treatment promoted a tendon-like structure in the peripheral layer of the constructs characterized by increased thickness with a gradual decrease in cell density and highly aligned collagen matrix. TGFβ1 also enhanced cell proliferation, matrix production, and morphological maturation of cells in the peripheral layer compared to vehicle treatment. TGFβ1 treatment also induced early tenogenic differentiation and resulted in sufficient mechanical integrity, allowing biomechanical testing. The current study suggests that this scaffold-free 3D tendon cell culture system could be an in vitro platform to investigate underlying biological mechanisms that regulate tenogenic cell differentiation and matrix organization., (© 2024. The Author(s).)

Background: Design freedom offered by additive manufacturing allows for the implementation of functional gradients - where mechanical stiffness is decreased along the length of the implant. It is unclear if such changes will influence failure mechanisms in the context of rib fracture repair. We hypothesized that our novel functionally graded rib implants would be less stiff than controls and decrease occurrence of secondary fracture at implant ends., Methods: Five novel additively manufactured rib implants were tested along with a clinically used Control implant. Fracture reconstructions were modeled with custom synthetic rib bones with a transverse B1 fracture. Ribs were compressed in a cyclic two-point bend test for 360,000 cycles followed by a ramp to failure test. Differences in cyclic stiffness, 3D interfragmentary motions, ramp-to-failure stiffness, maximum load, and work to failure were determined., Findings: The Control group had lower construct stiffness (0.76 ± 0.28 N/mm), compared to all novel implant designs (means: 1.35-1.61 N/mm, p < 0.05) and rotated significantly more about the bending axis (2.7° ± 1.3°) than the additively manufactured groups (means between 1.2° - 1.6°, p < 0.05). All constructs failed via bone fracture at the most posterior screw hole. Experimental implants were stiffer than Controls, and there were few significant differences between functional gradient groups., Interpretation: Additively manufactured, functionally graded designs have the potential to change the form and function of trauma implants. Here, the impact of functional gradients was limited because implants had small cross-sectional areas., Competing Interests: Declaration of Competing Interest None., (Copyright © 2023. Published by Elsevier Ltd.)

Conventional microdiscectomy treatment for intervertebral disc herniation alleviates pain but does not repair the annulus fibrosus, resulting in a high incidence of recurrent herniation and persistent dysfunction. The lack of repair and the acute inflammation that arise after injury can further compromise the disc and result in disc-wide degeneration in the long term. To address this clinical need, we developed tension-activated repair patches (TARPs) for annulus fibrosus repair and local delivery of the anti-inflammatory factor anakinra (a recombinant interleukin-1 receptor antagonist). TARPs transmit physiologic strain to mechanically activated microcapsules embedded within the patch, which release encapsulated bioactive molecules in direct response to spinal loading. Mechanically activated microcapsules carrying anakinra were loaded into TARPs, and the effects of TARP-mediated annular repair and anakinra delivery were evaluated in a goat model of annular injury in the cervical spine. TARPs integrated with native tissue and provided structural reinforcement at the injury site that prevented aberrant disc-wide remodeling resulting from detensioning of the annular fibrosus. The delivery of anakinra by TARP implantation increased matrix deposition and retention at the injury site and improved maintenance of disc extracellular matrix. Anakinra delivery additionally attenuated the inflammatory response associated with TARP implantation, decreasing osteolysis in adjacent vertebrae and preserving disc cellularity and matrix organization throughout the annulus fibrosus. These results demonstrate the therapeutic potential of TARPs for the treatment of intervertebral disc herniation.

Objective: To determine if preoperative examination of patient additive manufactured (AM) fracture models can be used to improve resident operative competency and patient outcomes., Design: Prospective cohort study. Seventeen matched pairs of fracture fixation surgeries (for a total of 34 surgeries) were performed. Residents first performed a set of baseline surgeries (n = 17) without AM fracture models. The residents then performed a second set of surgeries randomly assigned to include an AM model (n = 11) or to omit it (n = 6). Following each surgery, the attending surgeon evaluated the resident using an Ottawa Surgical Competency Operating Room Evaluation (O-Score). The authors also recorded clinical outcomes including operative time, blood loss, fluoroscopy duration, and patient reported outcome measurement information system (PROMIS) scores of pain and function at 6 months., Setting: Single-center academic level one trauma center., Participants: Twelve orthopaedic residents, between postgraduate year (PGY) 2 and 5, participated in this study., Results: Residents significantly improved their O-Scores between the first and second surgery when they trained with AM models for the second surgery (p = 0.004, 2.43 ± 0.79 versus 3.73 ± 0.64). Similar improvements were not observed in the control group (p = 0.916, 2.69 ± 0.69 versus 2.77 ± 0.36). AM model training also significantly improved clinical outcomes, including surgery time (p = 0.006), fluoroscopy exposure time (p = 0.002), and patient reported functional outcomes (p = 0.0006)., Conclusions: Conclusions: Training with AM fracture models improves the performance of orthopaedic surgery residents during fracture surgery., (Copyright © 2023 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.)

Background: The pronator teres (PT) to extensor carpi radialis brevis (ECRB) tendon transfer reestablishes wrist extension. Occasionally, the PT periosteal extension is of suboptimal quality to support a strong transfer. In these instances, turnover lengthening techniques can increase usable tendon length. This study characterized the optimal length of tendon turnover and the effect of lengthening on transfer strength., Methods: Twenty-seven cadaveric extensor tendons were lengthened using the turnover lengthening technique with 1 to 3 cm of tendon overlap. PT-to-ECRB tendon transfers were performed with native or lengthened ECRB tendons. Tensile testing was used to evaluate stress relaxation and load to failure., Results: The median maximum load to failure increased with increasing overlap length, measuring 35.6 N (quartile 1, 30.2 N; quartile 3, 38.6 N) for 1 cm, 66.0 N (quartile 1, 59.1 N; quartile 3, 74.7 N) for 2 cm, and 96.6 N (quartile 1, 85.9; quartile 3, 114.9 N) for 3 cm of overlap ( P < 0.05). Failure occurred most frequently at the junction of the central overlap and native tendon. Tendons lengthened with 2 and 3 cm of overlap displayed greater stiffness than those with 1 cm ( P < 0.05). Lengthening the ECRB tendon with 2 or 3 cm of overlap did not disrupt the strength or stiffness of subsequent PT-to-ECRB tendon transfers., Conclusions: Turnover tendon lengthening does not detrimentally affect PT-to-ECRB tendon transfer. Greater overlap lengthening distance confers greater stiffness and resistance to rupture. When the periosteal extension of the PT tendon avulses or is of poor quality, the ECRB tendon can be lengthened using the turnover tendon lengthening technique to facilitate a robust transfer., (Copyright © 2022 by the American Society of Plastic Surgeons.)

At the 2021 annual meeting of the Orthopaedic Trauma Association, the Basic Science Focus Forum hosted its first ever debate-style symposium focused on biomechanics and fracture repair. The 3 subjects of debate were "Mechanics versus Biology-Which is 'More Important' to Consider?" "Locked Plate versus Forward Dynamization versus Reverse Dynamization-Which Way Should I Go?" and "Sawbones versus Cadaver Models-What Should I Believe Most?" These debates were held because fracture healing is a highly organized synergistic response between biological factors and the local mechanical environment. Multiple studies have demonstrated that both factors play roles in governing bone healing responses, and the causal relationships between the 2 remain unclear. The lack of clarity in this space has led to a spectrum of research with the common goal of helping surgeons make good decisions. Before reading further, the reader should understand that the questions posed in the debate titles are unanswerable and might represent a false choice. Instead, the reader should appreciate that the debates were held to gain a more thorough understanding of these topics based on the current state of the art of experimental and clinical studies, by using an engaging and thought-provoking format., Competing Interests: The authors declare no conflicts of interest., (Copyright © 2023 The Authors. Published by Wolters Kluwer Health, Inc. on behalf of the Orthopaedic Trauma Association.)

Background & Aims: Glisson's capsule is the interstitial connective tissue that surrounds the liver. As part of its normal physiology, it withstands significant daily changes in liver size. The pathophysiology of the capsule in disease is not well understood. The aim of this study was to characterise the changes in capsule matrix, cellular composition, and mechanical properties that occur in liver disease and to determine whether these correlate with disease severity or aetiology., Methods: Samples from ten control patients, and six with steatosis, seven with moderate fibrosis, and 37 with cirrhosis were collected from autopsies, intraoperative biopsies, and liver explants. Matrix proteins and cell markers were assessed by staining and second harmonic generation imaging. Mechanical tensile testing was performed on a test frame., Results: Capsule thickness was significantly increased in cirrhotic samples compared with normal controls irrespective of disease aetiology (70.12 ± 14.16 μm and 231.58 ± 21.82 μm, respectively), whereas steatosis and moderate fibrosis had no effect on thickness (90.91 ± 11.40 μm). Changes in cirrhosis included an increase in cell number (fibroblasts, vascular cells, infiltrating immune cells, and biliary epithelial cells). Key matrix components (collagens 1 and 3, hyaluronan, versican, and elastin) were all deposited in the lower capsule, although only the relative amounts per area of hyaluronan and versican were increased. Organisational features, including crimping and alignment of collagen fibres, were also altered in cirrhosis. Unexpectedly, capsules from cirrhotic livers had decreased resistance to loading compared with controls., Conclusions: The liver capsule, similar to the parenchyma, is an active site of disease, demonstrating changes in matrix and cell composition as well as mechanical properties., Impact and Implications: We assessed the changes in composition and response to stretching of the liver outer sheath, the capsule, in human liver disease. We found an increase in key structural components and numbers of cells as well as a change in matrix organisation of the capsule during the later stages of disease. This allows the diseased capsule to stretch more under any given force, suggesting that it is less stiff than healthy tissue., Competing Interests: The authors declare no conflict of interest. Please refer to the accompanying ICMJE disclosure forms for further details., (© 2023 The Authors.)

Background: The docking technique is widely used to perform ulnar collateral ligament (UCL) reconstructions because of its high failure torque and reliable clinical outcomes. A double-cortical button technique was recently described, with advantages including the ability to tension the graft at the ulnar and humeral attachments and the creation of single bone tunnels., Purpose/hypothesis: To compare the biomechanics between the docking and double-button UCL reconstruction techniques using cadaveric specimens. We hypothesized that there would be no difference in postoperative stiffness or maximum strength between the techniques., Study Design: Controlled laboratory study., Methods: Eight matched pairs of cadaveric elbow joints underwent controlled humeral valgus torsion cycles in a test frame. Toe region stiffness, elastic region stiffness, and maximum torque were measured during a 4-step protocol: intact, injured, reconstructed (10 and 1000 cycles), and ramp to failure. Graft strains were calculated using 3-dimensional motion capture., Results: After 10 cycles, intact ligaments from the docking and double-button groups exhibited mean ± SD elastic torsional stiffness of 1.60 ± 0.49 and 1.64 ± 0.35 N·m/deg ( P = .827), while docking (1.10 ± 0.39 N·m/deg) and double-button (1.05 ± 0.29 N·m/deg) reconstructions were lower ( P = .754). There were no significant differences in maximum torque between the docking (3.45 ± 1.35 N·m) and double-button (3.25 ± 1.31 N·m) groups ( P = .777). Similarly, differences in maximum graft strains were not significant between the docking (8.1% ± 7.2%) and double-button (5.5% ± 3.1%) groups ( P = .645). The groups demonstrated similar decreases in these measures after cyclic loading. Ramp-to-failure testing showed no significant differences in ultimate torque between the docking (8.93 ± 3.9 N·m) and double-button (9.56 ± 3.5 N·m) groups ( P = .739)., Conclusion: The biomechanical behavior of the double-button technique was not significantly different from that of the docking technique. Both reconstruction techniques restored joint stability, but neither fully recapitulated preinjury joint stiffness., Clinical Relevance: With its procedural advantages, results preliminarily support the use of the double-button reconstruction technique for UCL reconstruction as a reliable single-tunnel technique for primary or revision cases., Competing Interests: One or more of the authors has declared the following potential conflict of interest or source of funding: Funding was provided by the Murray Blackman SE Fellowship Fund, an internal grant from the University of Pennsylvania. Surgical supplies used in this study were provided by Arthrex. G.R.H. has received consulting fees from FX Shoulder USA, Lima USA, Limacorporate, and Medical Device Business Services. AOSSM checks author disclosures against the Open Payments Database (OPD). AOSSM has not conducted an independent investigation on the OPD and disclaims any liability or responsibility relating thereto. This study was supported by NIH/NIAMS P30AR069619., (© The Author(s) 2023.)

Hydrogels that provide mechanical support and sustainably release therapeutics have been used to treat tendon injuries. However, most hydrogels are insufficiently tough, release drugs in bursts, and require cell infiltration or suturing to integrate with surrounding tissue. Here we report that a hydrogel serving as a high-capacity drug depot and combining a dissipative tough matrix on one side and a chitosan adhesive surface on the other side supports tendon gliding and strong adhesion (larger than 1,000 J m -2 ) to tendon on opposite surfaces of the hydrogel, as we show with porcine and human tendon preparations during cyclic-friction loadings. The hydrogel is biocompatible, strongly adheres to patellar, supraspinatus and Achilles tendons of live rats, boosted healing and reduced scar formation in a rat model of Achilles-tendon rupture, and sustainably released the corticosteroid triamcinolone acetonide in a rat model of patellar tendon injury, reducing inflammation, modulating chemokine secretion, recruiting tendon stem and progenitor cells, and promoting macrophage polarization to the M2 phenotype. Hydrogels with 'Janus' surfaces and sustained-drug-release functionality could be designed for a range of biomedical applications., (© 2022. The Author(s), under exclusive licence to Springer Nature Limited.)

Background: Treatment of proximal humerus periprosthetic fractures is challenging. It remains difficult to achieve robust fixation of the proximal fragment to the locking plate using cerclage wiring and/or unicortical screws. Use of polyaxial tangentially directed bicortical locking screws increases screw purchase, but it is unclear if this option provides robust fixation. This biomechanical study compares fixation of constructs using cerclage wires, bicortical locking screws, and a hybrid method utilizing both methods., Methods: Uncemented humeral stems were implanted into synthetic humeri and Type C periprosthetic fractures were simulated with a 1 cm transverse osteotomy. Distal ends of locking plates were secured with bicortical non-locking screws. The proximal ends were supported by either isolated cerclage wires, polyaxial locking screws, or a hybrid combination of both (n = 6 for each group). A universal test frame was used for non-destructive torsion and cyclic axial compression tests. 3-D motion tracking was employed to determine stiffnesses and relative interfragmentary motions., Findings: Isolated screw constructs showed significantly increased resistance against torsional movement, bending, and shear, (p < 0.05) in comparison to cerclage constructs. The hybrid construct provided no significant changes in stability over the isolated screw construct., Interpretation: Addition of cerclage wires in this synthetic bone model of Type C periprosthetic humerus fractures did not add significant stability to proximal bicortical locking plate fixation. Considering risks of tissue stripping and nerve injury, usage of cerclage wires in a similar clinical setting should be chosen carefully, especially when bicortical fixation around the prosthetic stem can be achieved., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

Background: This systematic review explores the differences in the intrinsic biomechanical properties of different graft sources used in anterior cruciate ligament (ACL) reconstruction as tested in a laboratory setting., Methods: Following Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines, two authors conducted a systematic review exploring the biomechanical properties of ACL graft sources (querying PubMed, Cochrane, and Embase databases). Using the keywords "anterior cruciate ligament graft," "biomechanics," and "biomechanical testing," relevant articles of any level of evidence were identified as eligible and included if they reported on the biomechanical properties of skeletally immature or mature ACL grafts solely and if the grafts were studied in vitro, in isolation, and under similar testing conditions. Studies were excluded if performed on both skeletally immature and mature or non-human grafts, or if the grafts were tested after fixation in a cadaveric knee. For each graft, failure load, stiffness, Young's modulus, maximum stress, and maximum strain were recorded., Findings: Twenty-six articles were included. Most studies reported equal or increased biomechanical failure load and stiffness of their tested bone-patellar tendon-bone, hamstring, quadriceps, peroneus longus, tibialis anterior and posterior, Achilles, tensor fascia lata, and iliotibial band grafts compared to the native ACL. All recorded biomechanical properties had similar values between graft types., Interpretation: Most grafts used for ACL reconstruction are biomechanically superior to the native ACL. Utilizing a proper graft, combined with a standard surgical technique and a rigorous rehabilitation before and after surgery, will improve outcomes of ACL reconstruction., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

Objectives: Current surgical fracture treatment paradigms, which use rigid metallic constructs to heal bones, provide reasonable clinical outcomes; however, they do not leverage recent advances in our understanding of bone healing and mechanotransduction throughout bone healing. The objective of this review was to investigate the efficacy and potential clinical applicability of surgical techniques and implants that deliberately introduce interfragmentary motion throughout the healing process., Methods: The authors searched PubMed and Google Scholar databases for articles reporting on fracture repair using dynamic locking plates, dynamized surgical techniques, and reverse dynamization. Data collection also included assessment of additively manufactured (AM) implants that provide dynamic mechanical behaviors., Results: Forty articles were included for final review. It was found that accelerated rates of fracture healing can be achieved with staged 2-part surgeries or dynamic implant designs. Temporal dynamization, where static fixation of bones is followed by the introduction of micromotion and controlled loading, has been shown to improve callus volume and accelerate the healing response. Reverse dynamization, where micromotion is encouraged during early callus formation and arrested later, may represent a significant advance for the treatment of critical defect injuries. Advances in AM techniques will likely provide the ability to create high-resolution implants capable of dynamized and reverse dynamized modalities., Conclusions: There is no one-size-fits-all approach to optimization of fracture healing. However, it has been clearly demonstrated that fracture treatment can be enhanced by systematically altering the construct stiffness throughout the different phases of healing, which may be achieved with AM implant designs., Competing Interests: The authors have no conflicts of interest to disclose., (Copyright © 2022 The Authors. Published by Wolters Kluwer Health, Inc. on behalf of the Orthopaedic Trauma Association.)

Background: The corrective procedures for meniscal injury are dependent on tear type, severity, and location. Vertical longitudinal tears are common in young and active individuals, but their natural progression and impact on osteoarthritis (OA) development are not known. Root tears are challenging and they often indicate poor outcomes, although the timing and mechanisms of initiation of joint dysfunction are poorly understood, particularly in large-animal and human models., Purpose/hypothesis: In this study, vertical longitudinal and root tears were made in a large-animal model to determine the progression of joint-wide dysfunction. We hypothesized that OA onset and progression would depend on the extent of injury-based load disruption in the tissue, such that root tears would cause earlier and more severe changes to the joint., Study Design: Controlled laboratory study., Methods: Sham surgeries and procedures to create either vertical longitudinal or root tears were performed in juvenile Yucatan mini pigs through randomized and bilateral arthroscopic procedures. Animals were sacrificed at 1, 3, or 6 months after injury and assessed at the joint and tissue level for evidence of OA. Functional measures of joint load transfer, cartilage indentation mechanics, and meniscal tensile properties were performed, as well as histological evaluation of the cartilage, meniscus, and synovium., Results: Outcomes suggested a progressive and sustained degeneration of the knee joint and meniscus after root tear, as evidenced by histological analysis of the cartilage and meniscus. This occurred in spite of spontaneous reattachment of the root, suggesting that this reattachment did not fully restore the function of the native attachment. In contrast, the vertical longitudinal tear did not cause significant changes to the joint, with only mild differences compared with sham surgery at the 6-month time point., Conclusion: Given that the root tear, which severs circumferential connectivity and load transfer, caused more intense OA compared with the circumferentially stable vertical longitudinal tear, our findings suggest that without timely and mechanically competent fixation, root tears may cause irreversible joint damage., Clinical Relevance: More generally, this new model can serve as a test bed for experimental surgical, scaffold-based, and small molecule-driven interventions after injury to prevent OA progression., Competing Interests: One or more of the authors has declared the following potential conflict of interest or source of funding: This work was supported by the Department of Veterans Affairs (I01 RX000174, IK6 RX003416, and I21 RX003293) and the National Institutes of Health (R01 EB002425, R01 AR056624, and T32 AR007132). Additional support was provided by a New Investigator Award from the Orthopaedic Research and Education Foundation and a pilot award from the Penn Center for Musculoskeletal Disorders (P30 AR069619). L.M.M. has received hospitality payments from Stryker. J.M.P. has received consulting fees from NovoPedics. M.H.Z. has received education payments from Arthrex and Liberty Surgical. C.R.S. has received consulting fees from Bayer. AOSSM checks author disclosures against the Open Payments Database (OPD). AOSSM has not conducted an independent investigation on the OPD and disclaims any liability or responsibility relating thereto., (© The Author(s) 2021.)

Biomechanical testing of long bones can be susceptible to errors and uncertainty due to malalignment of specimens with respect to the mechanical axis of the test frame. To solve this problem, we designed a novel, customizable alignment and potting fixture for long bone testing. The fixture consists of three-dimensional-printed components modeled from specimen-specific computed tomography (CT) scans to achieve a predetermined specimen alignment. We demonstrated the functionality of this fixture by comparing benchtop torsional test results to specimen-matched finite element models and found a strong correlation (R2 = 0.95, p < 0.001). Additional computational models were used to estimate the impact of malalignment on mechanical behavior in both torsion and axial compression. Results confirmed that torsion testing is relatively robust to alignment artifacts, with absolute percent errors less than 8% in all malalignment scenarios. In contrast, axial testing was highly sensitive to setup errors, experiencing absolute percent errors up to 50% with off-center malalignment and up to 170% with angular malalignment. This suggests that whenever appropriate, torsion tests should be used preferentially as a summary mechanical measure. When more challenging modes of loading are required, pretest clinical-resolution CT scanning can be effectively used to create potting fixtures that allow for precise preplanned specimen alignment. This may be particularly important for more sensitive biomechanical tests (e.g., axial compressive tests) that may be needed for industrial applications, such as orthopedic implant design., (Copyright © 2021 by ASME.)

Background: Current implants for clavicle fractures are known to cause poor cosmesis and irritation, which may require implant removal. Low-profile shape-memory staples provide an attractive alternative, but their biomechanical utility in clavicle reconstruction is unknown. We hypothesized that shape-memory reconstructions would be more compliant compared to traditional constructs but would also outperform conventional plates during cyclic loading to failure., Methods: This study was performed with 36 synthetic clavicles and 12 matched pairs of cadaveric specimens. The synthetic study tested four reconstructions: a single superiorly placed staple (n = 6), a single anteroinferiorly-placed staple (n = 6), a 3.5 mm reconstruction plate (n = 12), and two orthogonally placed staples (n = 12). The cadaveric study tested three constructs: reconstruction plate (n = 8), two orthogonal staples (n = 8), and a 2.7 mm reconstruction plate combined with a superior staple (n = 8). Non-destructive 4-point bending, compression, and torsion assays were performed prior to destructive cantilever bending and cyclic torsion tests., Findings: The single staple and double staple groups demonstrated significantly decreased resistance to bending (p < 0.001) and torsion (p ≤ 0.027) when compared to reconstruction plate groups. The double staple group sustained significantly fewer cycles to failure than the reconstruction plate group in cyclic torsional tests (p = 0.012). The synthetic models produced higher stiffness and failure mechanisms that were completely different from cadaveric specimens., Interpretation: Shape memory alloy implants provided inadequate stiffness for clavicle fixation but may have utility in other orthopaedic applications when used as a supplementary compression device in conjunction with traditional plated constructs. Synthetic bones have limited capacity for modeling fragility fractures., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

Given its complex shape and relatively small size, the trapezium surface at the trapeziometacarpal (TMC) joint is a particularly attractive target for anatomic biologic joint resurfacing, especially given its propensity to develop osteoarthritis, and the limited and sub-optimal treatment options available. For this to advance to clinical translation, however, an appropriate large animal model is required. In this study, we explored the porcine accessory carpal bone (ACB) as a model for the human trapezium. We characterized ACB anatomy, geometry, joint and tissue-scale mechanics, and composition across multiple donors. We showed that the ACB is similar both in size, and in the saddle shape of the main articulating surface to the human trapezium, and that loads experienced across each joint are similar. Using this information, we then devised a fabrication method and workflow to produce patient-specific tissue-engineered replicas based on CT scans, and showed that when such replicas are implanted orthotopically in an ex vivo model, normal loading is restored. Data from this study establish the porcine ACB as a model system in which to evaluate function of engineered living joint resurfacing strategies. STATEMENT OF SIGNIFICANCE: Biologic joint resurfacing, or the replacement of a joint with living tissue as opposed to metal and plastic, is the holy grail of orthopaedic tissue engineering. However, despite marked advances in engineering native-like osteochondral tissues and in matching patient-specific anatomy, these technologies have not yet reached clinical translation. Given its propensity for developing osteoarthritis, as well as its small size and complex shape, the trapezial surface of the trapeziometacarpal joint at the base of the thumb presents a unique opportunity for pursuing a biologic joint resurfacing strategy. This work establishes the porcine accessory carpal bone as an animal model for the human trapezium and presents a viable test-bed for evaluating the function of engineered living joint resurfacing strategies., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2021. Published by Elsevier Ltd.)

Design and processing capabilities of additive manufacturing (AM) to fabricate complex geometries continues to drive the adoption of AM for biomedical applications. In this study, a validated design methodology is presented to evaluate AM as an effective fabrication technique for reconstruction of large bone defects after tumor resection in pediatric oncology patients. Implanting off-the-shelf components in pediatric patients is especially challenging because most standard components are sized and shaped for more common adult cases. While currently reported efforts on AM implants are focused on maxillofacial, hip and knee reconstructions, there have been no reported studies on reconstruction of proximal humerus tumors. A case study of a 9-year-old diagnosed with proximal humerus osteosarcoma was used to develop a patient-specific AM prosthesis for the humerus following tumor resection. Commonly used body-centered cubic (BCC) structures were incorporated at the surgical neck and distal interface in order to increase the effective surface area, promote osseointegration, and reduce the implant weight. A patient-specific prosthesis was fabricated using electron beam melting method from biocompatible Ti-6Al-4V. Both computational and biomechanical tests were performed on the prosthesis to evaluate its biomechanical behavior under varying loading conditions. Morphological analysis of the construct using micro-computed tomography was used to compare the as-designed and as-built prosthesis. It was found that the patient-specific prosthesis could withstand physiologically-relevant loading conditions with minimal permanent deformation (82 μm after 105 cycles) at the medial aspect of the porous surgical neck. These outcomes support potential translation of the patient-specific AM prostheses to reconstruct large bone defects following tumor resection., Competing Interests: TransMachine Additive (NC, USA) provided support on EBM fabrication of the patient-specific implant in this study. This does not alter our adherence to PLOS ONE policies on sharing data and materials. There are no patents, products in development or marketed products associated with this research to declare.

Background: This study compared stiffness between two constructs for talonavicular arthrodesis: a dorsomedial plating system and two partially threaded cannulated cancellous screws. We hypothesized that the plate would exhibit greater stiffness and resistance to deformation during cyclic loading., Methods: The constructs were implanted in eight matched pairs of cadaveric feet and subjected to axial torsion, cantilever bending in two directions, and cyclic loading to failure., Results: The two-screw constructs were significantly stiffer in plantar-dorsal bending (p = .025) and trended towards a higher number of cycles before failure than the plate group (p = .087). No significant differences were observed in internal torsion (p = .620), external torsion (p = .165), or medial-lateral bending (p = .686)., Conclusions: This study provided the first biomechanical assessment of a plating system with an integrated compression screw, which was significantly less stiff than a two-screw construct when loaded from plantar to dorsal., (Copyright © 2020 European Foot and Ankle Society. Published by Elsevier Ltd. All rights reserved.)

Background: Failure of surgical fixation in orthopaedic fractures occurs at a significantly higher rate in osteoporotic patients due to weakened osteoporotic bone. A therapy to acutely improve the mechanical properties of bone during fracture repair would have profound clinical impact. A previous study has demonstrated an increase in mechanical properties of acellular cortical canine bone after immersion in raloxifene. The goal of this study was to determine if similar treatment yields the same results in cancellous fetal bovine bone and whether this translates into a difference in screw pull-out strength in human cadaveric tissue., Methods: Cancellous bone from fetal bovine distal femora underwent quasi-static four-point bending tests after being immersed in either raloxifene (20 μM) or phosphate-buffered saline as a control for 7 days (n = 10). Separately, 5 matched pairs of human osteoporotic cadaveric humeral heads underwent the same procedure. Five 3.5 mm unicortical cancellous screws were then inserted at standard surgical fixation locations to a depth of 30 mm and quasi-static screw pull-out tests were performed., Results: In the four-point bending tests, there were no significant differences between the raloxifene and control groups for any of the mechanical properties - including stiffness (p = 0.333) and toughness (p = 0.546). In the screw pull-out tests, the raloxifene soaked samples and control samples had pullout strengths of 122 ± 74.3 N and 89.5 ± 63.8 N, respectively., Conclusions: Results from this study indicate that cancellous fetal bovine samples did not demonstrate an increase in toughness with raloxifene treatment, which is in contrast to previously published data that studied canine cortical bone. In vivo experiments are likely required to determine whether raloxifene will improve implant fixation.

This manuscript summarizes presentations of a symposium on key considerations in design of biomechanical models at the 2019 Basic Science Focus Forum of the Orthopaedic Trauma Association. The first section outlines the most important characteristics of a high-quality biomechanical study. The second section considers choices associated with designing experiments using finite element modeling versus synthetic bones versus human specimens. The third section discusses appropriate selection of experimental protocols and finite element analyses. The fourth section considers the pros and cons of use of biomechanical research for implant design. Finally, the fifth section examines how results from biomechanical studies can be used when clinical evidence is lacking or contradictory. When taken together, these presentations emphasize the critical importance of biomechanical research and the need to carefully consider and optimize models when designing a biomechanical study., (Copyright © 2021 The Authors. Published by Wolters Kluwer Health, Inc. on behalf of the Orthopaedic Trauma Association.)

Purpose: This study examined the effect of low-profile volar rim plates (VR), proximally placed standard variable-angle locking plates (pVA-LCP), and distally placed standard variable-angle locking plates (dVA-LCP) on the flexor pollicis longus (FPL) tendon in a cadaver model. We hypothesized that tendons from the VR and pVA-LCP groups would exhibit similar contact pressures, wear patterns, and post-fatigue testing mechanical properties, whereas dVA-LCP tendons would exhibit higher contact pressures, increased tendon wear patterns, and decreased mechanical properties., Methods: Nine matched pairs of cadaveric specimens were used in this study. Thin-film pressure sensors were used to measure the initial contact loads between plates and FPL tendons. Specimens were cyclically loaded for 10,000 cycles by actuating the FPL tendon. Cycled tendons were harvested, photographed with a stereomicroscope, and graded for wear on a Likert scale by 5 observers who were blinded to the study protocol. Uniaxial tensile testing measured mechanical properties of the tendon: ultimate failure load, ultimate stress, percent stress relaxation, elastic modulus, and stiffness., Results: With regard to the cadaveric FPL tendon, VR and dVA-LCP had increased contact pressure and tendon wear compared with pVA-LCP. There were no significant differences in contact pressure or tendon wear between dVA-LCP and VR. There was no major difference in the tested mechanical properties of the FPL tendon among any of the groups., Conclusions: Plates placed directly on or beyond the volar rim demonstrate increased contact pressures and increased tendon wear in a cadaveric model., Clinical Relevance: Although low-profile plates allow for fixation of smaller volar fragments in the distal radius, they cause substantial contact with the FPL tendon, which may rupture if the plate is not removed., (Copyright © 2021 American Society for Surgery of the Hand. Published by Elsevier Inc. All rights reserved.)

The meniscus plays a central load-bearing role in the knee joint. Unfortunately, meniscus injury is common and can lead to joint degeneration and osteoarthritis (OA). In small animal models, progressive degenerative changes occur with the unloading of the meniscus via destabilization of the medial meniscus (DMM). However, few large animal models of DMM exist and the joint-wide initiation of the disease has not yet been defined in these models. Thus, the goal of this study is to develop and validate a large animal model of surgically induced DMM and to use multimodal (mechanical, histological, and magnetic resonance imaging) and multiscale (joint to tissue level) quantitative measures to evaluate degeneration in both the meniscus and cartilage. DMM was achieved using an arthroscopic approach in 13 Yucatan minipigs. One month after DMM, joint contact area decreased and peak pressure increased, indicating altered load transmission as a result of meniscus destabilization. By 3 months, the joint had adapted to the injury and load transmission patterns were restored to baseline, likely due to the formation and maturation of a fibrovascular scar at the anterior aspect of the meniscus. Despite this, we found a decrease in the indentation modulus of the tibial cartilage and an increase in cartilage histopathology scores at 1 month compared to sham-operated animals; these deleterious changes persisted through 3 months. Over this same time course, meniscus remodeling was evident through decreased proteoglycan staining in DMM compared to sham menisci at both 1 and 3 months. These findings support that arthroscopic DMM results in joint degeneration in the Yucatan minipig and provide a new large animal testbed in which to evaluate therapeutics and interventions to treat post-traumatic OA that originates from a meniscal injury., (© 2020 Orthopaedic Research Society. Published by Wiley Periodicals, Inc.)

Tendon mechanical properties respond to altered load in adults, but how load history during growth affects adult tendon properties remains unclear. To address this question, we adopted an avian model in which we altered the mechanical load environment across the growth span. Animals were divided at 2 weeks of age into three groups: (1) an exercise control group given the opportunity to perform high-acceleration movements (EXE, n = 8); (2) a sedentary group restricted from high-intensity exercise (RES, n = 8); and (3) a sedentary group also restricted from high-intensity exercise and in which the gastrocnemius muscles were partially paralyzed using repeated bouts of botulinum toxin-A injections (RES-BTX, n = 8). Video analysis of bird movement confirmed the restrictions eliminated high-intensity exercise and did not alter time spent walking and sitting between groups. At skeletal maturity (33-35 weeks) animals were sacrificed for analysis, consisting of high-field MRI and material load testing, of both the entire free Achilles tendon and the tendon at the bone-tendon junction. Free tendon stiffness, modulus, and hysteresis were unaffected by variation in load environment. Further, the bone-tendon junction cross-sectional area, stress, and strain were also unaffected by variations in load environment. These results suggest that: (a) a baseline level of low-intensity activity (standing and walking) may be sufficient to maintain tendon growth; and (b) if this lower threshold of tendon load is met, non-mechanical mediated tendon growth may override the load-induced mechanotransduction signal attributed to tendon remodeling in adults of the same species. These results are important for understanding of musculoskeletal function and tendon health in growing individuals., (Copyright © 2020 Katugam, Cox, Salzano, De Boef, Hast, Neuberger, Ryan, Piazza and Rubenson.)

Internal fixation with the use of locking plates is the standard surgical treatment for proximal humerus fractures, one of the most common fractures in the elderly. Screw cut-out through weak cancellous bone of the humeral head, which ultimately results in collapse of the fixed fracture, is the leading cause of failure and revision surgery. In an attempt to address this problem, surgeons often attach the plate with as many locking screws as possible into the proximal fragment. It is not thoroughly understood which screws and screw combinations play the most critical roles in fixation stability. This study conducted a detailed finite element analysis to evaluate critical parameters associated with screw cut-out failure. Several clinically relevant screw configurations and fracture gap sizes were modeled. Findings demonstrate that in perfectly reduced fracture cases, variation of the screw configurations had minor influence on mechanical stability of the fixation. The effects of screw configurations became substantial with the existence of a fracture gap. Interestingly, the use of a single anterior calcar screw was as effective as utilizing two screws to support the calcar. On the other hand, the variation in calcar screw configuration had minor influence on the fixation stability when all the proximal screws (A-D level) were filled. This study evaluates different screw configurations to further understand the influence of combined screw configurations and the individual screws on the fixation stability. Findings from this study may help decrease the risk for screw cut-out with proximal humerus varus collapse and the associated economic costs., (Copyright © 2020 by ASME.)

Achilles tendon disorders are among the most difficult sports-related injuries to predict with current diagnostic tools. The purpose of this study was to identify a clinically useful marker for early tendon damage. We hypothesized that alterations in mean echogenicity are linked with changes in vitro tendon mechanics. To test our hypothesis, we harvested Achilles tendons from 10 fresh-frozen cadaveric feet and cyclically fatigued them using a universal test frame while we continuously acquired ultrasound images. Throughout this fatigue protocol, we applied 2 stress tests every 500 loading cycles to quantify changes in ultrasound imaging echogenicity. We continued this fatigue protocol until each tendon either failed completely or survived 150,000 cycles. Tendons that failed during the fatigue loading (6/10) underwent greater changes in mean echogenicity compared to tendons that did not fail (P = 0.031). These tendons that failed during fatigue loading demonstrated greater changes in mean echogenicity that surpassed 1.0%; whereas survivor tendons exhibited less than 0.5% changes in mean echogenicity. We found that changes in mean echogenicity measured with ultrasound increased proportionally with increased tendon damage. The magnitude of these changes was relatively small (<1.5% change in mean echogenicity) but may be an effective predictor of tendon failure. Mean echogenicity is a promising marker for quantifying fatigue damage in cadaveric Achilles tendons during a stress test. Although these changes cannot be detected with the naked eye, computer-based predictive models may effectively assess risk of tendon damage in physically active adults., Competing Interests: Declaration of Competing Interest We have no conflicts of interest to report in relation to this study., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

Half of the women who sustain a hip fracture would not qualify for osteoporosis treatment based on current DXA-estimated bone mineral density criteria. Therefore, a better approach is needed to determine if an individual is at risk of hip fracture from a fall. The objective of this study was to determine the association between radiation-free MRI-derived bone strength and strain simulations compared to results from direct mechanical testing of cadaveric femora. Imaging was conducted on a 3-Tesla MRI scanner using two sequences: one balanced steady-state free precession sequence with 300 μm isotropic voxel size and one spoiled gradient echo with anisotropic voxel size of 234 × 234 × 1500 μm. Femora were dissected free of soft-tissue and 4350-ohm strain-gauges were securely applied to surfaces at the femoral shaft, inferior neck, greater trochanter, and superior neck. Cadavers were mechanically tested with a hydraulic universal test frame to simulate loading in a sideways fall orientation. Sideways fall forces were simulated on MRI-based finite element meshes and bone stiffness, failure force, and force for plastic deformation were computed. Simulated bone strength metrics from the 300 μm isotropic sequence showed strong agreement with experimentally obtained values of bone strength, with stiffness (r = 0.88, p = 0.0002), plastic deformation point (r = 0.89, p < 0.0001), and failure force (r = 0.92, p < 0.0001). The anisotropic sequence showed similar trends for stiffness, plastic deformation point, and failure force (r = 0.68, 0.70, 0.84; p = 0.02, 0.01, 0.0006, respectively). Surface strain-gauge measurements showed moderate to strong agreement with simulated magnitude strain values at the greater trochanter, superior neck, and inferior neck (r = -0.97, -0.86, 0.80; p ≤0.0001, 0.003, 0.03, respectively). The findings from this study support the use of MRI-based FE analysis of the hip to reliably predict the mechanical competence of the human femur in clinical settings., (Copyright © 2020 Elsevier Inc. All rights reserved.)

Objectives: To make direct comparisons of the biomechanical properties of a control (CTL) group and implants that were augmented with far cortical locking (FCL), bone substitute material (BSM), and a combination of both (ALL) to determine which fixation is most effective in reducing implant failure., Methods: The constructs were tested with osteopenic cadaveric specimens in a two-part fracture model. Specimens were subjected to a battery of nondestructive torsion and axial compression tests, followed by a cyclic test. Construct stiffness and cycles to failure were documented, pre- and post-test fluoroscopy was performed, and implant and bone kinematics were quantified., Results: During nondestructive testing, the BSM group exhibited significantly increased torsional and axial stiffness compared with the FCL (P = 0.006, P < 0.001) group and ALL group (P < 0.001, P = 0.006). There were no significant differences in resistance to cyclic loading between groups. Fluoroscopic analysis indicated significant differences in the motions of nonlocked cannulated screws (used in BSM and ALL) versus locked screws (used in CTL and FCL)., Conclusions: Patients with poor bone quality and proximal humerus fracture may necessitate added compliance or rigidity to achieve fixation. Both have exhibited favorable biomechanical characteristics in this cadaveric 2-part proximal humerus fracture model.

Achieving satisfactory fracture fixation in osteoporotic patients with unstable proximal humerus fractures remains a major clinical challenge. Varus collapse is one of the more prominent complications that may lead to screw cutout. This aim of this study was to compare the fixation provided by conventional locking plates with novel design concepts that are only feasible through additive manufacturing (AM) techniques. In addition to reversed engineered implants, two novel implant designs with integrated struts were included in the study to provide medial support to humeral head. The medial strut was either solid or included a porous lattice structure intended to promote bone ingrowth. Biomechanical tests were performed using low density synthetic bones with simulated 3-part comminuted fractures. Nondestructive torsion and compression were performed, followed by increasing cyclic loading. The relative displacements between the bone fragments were determined using a 3D motion capture system. The AM manufactured implants with medial strut showed significant reduction of varus displacement during the increasing cyclic loading when compared to conventional designs. AM reversed-engineered locking plates showed similar mechanical behavior to conventional plates with identical geometry. This study demonstrates the feasibility and potential of employing alternative design via AM for fixation of unstable comminuted proximal humerus fractures to reduce fragment displacement.

Adequate glenoid baseplate fixation in reverse total shoulder arthroplasty (rTSA) is important to achieve, but may prove challenging in the context of glenoid bone loss or osteopenia. Current rTSA testing standards rely upon synthetic bone surrogates, but it is unclear if these models accurately recapitulate the mechanics of osteoporotic bone. Additionally, it also unknown if the use of a central screw effectively provides resistance to micromotion in the milieu of poor quality bone. The purpose of this experiment was to create a novel cyclic load test protocol that elicited clinically relevant failures, so that comparisons of relative motion between baseplates and bones could be made with: (1) synthetic bones and poor quality cadaveric bones, and (2) the use or omission of a central screw. rTSA components were implanted into cadaveric and synthetic bones with and without a central screw. To model a range of loads that may be experienced during abduction, increasing cyclic loads were applied to shoulder joints in 30° of humeral abduction. Cycles and loads prior to permanent deformation exceeding 150 µm, 1 mm, and joint failure were determined using measurements from the test frame and from 3-D motion analysis. Synthetic bones demonstrated significantly more resistance to micromotion in comparison to cadaveric bones. Use of the central screw improved resistance to dislodgement, which was only observed in the cadaveric specimens. This study highlights the need for biomechanical testing with cadaveric specimens, especially when assessing osteopenic or osteoporotic populations., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

The purpose of this study was to systematically quantify distal radioulnar joint stability with a cadaveric model, using radiographic and joint contact force measurements. Six fresh-frozen cadavers underwent sequential ulnar styloid osteotomies. Posteroanterior and lateral stress radiographs were obtained and joint contact forces and areas were measured. Posteroanterior radiographs showed a significant increase in the distal radioulnar joint gap after osteotomy of the base of the ulnar styloid. Contact force and contact area measurements were not significantly different. We conclude that fractures that involve the ulnar styloid base should be considered for operative fixation when carrying out open reduction and internal fixation of fractures of the distal radius.

Background: Locked plating of displaced proximal humeral fractures is common, but rates of subacromial impingement remain high. This study used a multidisciplinary approach to elucidate the relationships between common surgical parameters, anatomic variability, and the likelihood of plate impingement., Methods: The experiment was completed in 3 phases. First, a controlled in vitro experiment was conducted to simulate impingement. Second, a dynamic in silico musculoskeletal model modeled changes to implant geometry, surgical techniques, and acromial anatomy, where a collision detection algorithm was used to simulate impingement. Finally, in vivo shoulder kinematics were recorded for 9 activities of daily living. Motions that created a high likelihood of impingement were identified., Results: Of simulated impingement events, 73.9% occurred when the plate was moved proximally, and 84% occurred when acromial tilt was 20° or 25°. Simulations of impingement occurred at cross-body adduction angles between 10° and 50°. Impingement occurred at an average of 162.0° ± 14.8° abduction with 10 mm distal plate placement, whereas the average was 72.1° ± 11.4° with 10 mm proximal placement. A patient may encounter these shoulder angles when performing activities such as combing one's hair, lifting an object overhead, and reaching behind one's head., Discussion and Conclusion: Proximal implant placement and decreases in acromial tilt play major roles in the likelihood of impingement, whereas plate thickness and humeral head center of rotation should also be considered. Careful preoperative planning that includes these factors could help guide operative decision making and improve clinical outcomes., (Copyright © 2018 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.)

Background: The saline load test has previously been shown to be an effective tool to diagnose traumatic arthrotomies, but no studies have assessed the test's efficacy in the wrist. The purpose of this study was to investigate the amount of fluid required during a saline load test to detect intra-articular wrist involvement of traumatic wounds with high sensitivity., Methods: A cadaveric study was conducted using 7 thawed, fresh-frozen forequarter amputations from 7 different donors (3 male, 4 female). Specimen age (mean: 67.7 y, range: 52 to 80 y), laterality (1 right, 6 left), body weight (mean: 164.3 lbs, range: 100 to 223 lbs), and wrist range of motion (ROM) was assessed before testing. The wrist capsule was punctured with an 11-blade scalpel through the 6R radiocarpal portal site under fluoroscopic guidance to ensure the injury was intra-articular. A 19-G needle was then placed through the 3,4 radiocarpal portal site and confirmed with fluoroscopy to ensure intra-articular placement. Normal saline was then injected at a steady rate into the 3,4 radiocarpal portal site until extravasation of the saline was observed from the 6R radiocarpal arthrotomy site. The volume of saline required for extravasation from the 6R radiocarpal arthrotomy was recorded as the volume required to detect the arthrotomy. A plot of saline volumes (by percentile) was created, and a logarithmic distribution was calculated. A Wilcoxon rank-sum test was used to compare injection volumes between male and female specimens, and Pearson Coefficients were used to determine any correlations between injection volume and ROM., Results: The average amount of saline that resulted in extravasation was 4 mL (range: 2 to 7 mL). In order to identify 75%, 90%, 95%, and 99% of the simulated wrist arthrotomies, 5 (95% confidence interval: 3-7), 6 (4-9), 7 (4-10), and 9 (5-14) mL were required, respectively. Pretest ROM did not correlate with saline volume., Conclusions: This study demonstrates the efficacy of the saline load test in detecting traumatic arthrotomies of the wrist joint with 95% sensitivity after loading 7 mL of saline. Prompt and accurate diagnosis of traumatic arthrotomies is paramount to guide management and optimize postinjury outcomes.

Achilles tendon ruptures have been linked with detrimental changes in muscle-tendon structure, which may help explain long-term functional deficits. However, the causal effects of muscle-tendon structure on joint function have not been tested in a controlled setting. Therefore, the purpose of this study was to test the implications of muscle-tendon unit parameters on simulated single-leg heel raise height. We hypothesized that muscle fiber length and resting ankle angle - a clinical surrogate measure of tendon slack length - would predict single-leg heel raise height more strongly than other parameters. To test this hypothesis, we developed a two-part simulation paradigm that recreated clinically relevant muscle-tendon scenarios and then tested these parameters on single-leg heel raise height. We found that longer muscle fibers had the greatest positive effect on single-leg heel raise height. However, tendon slack length, determined by simulating resting ankle angles in a secondary analysis, revealed a stronger negative correlation with heel raise height. Our findings support previous clinical observations that both muscle fascicle length and resting tendon length are important muscle-tendon parameters for patient function. In addition to minimizing tendon elongation following rupture, treatment plans should focus on preserving plantarflexor muscle structure to mitigate functional loses following Achilles tendon ruptures., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

Background: Although anterior cruciate ligament (ACL) tears have received the most attention, the medial collateral ligament (MCL) is thought to be the most commonly injured knee ligament overall. The lateral collateral ligament (LCL) and posterior collateral ligament (PCL) are less frequently compromised but can be involved in severe multiligament injuries. The paucity of information on the native properties of these ligaments in the pediatric population hinders the overall optimization of treatment for these injuries., Purpose: To characterize the mechanical and microstructural properties of pediatric MCLs, LCLs, and PCLs using a rare cadaveric cohort (mean age, 9.2 years)., Study Design: Descriptive laboratory study., Methods: MCLs, LCLs, and PCLs were harvested from 5 fresh-frozen pediatric knee specimens (3 male, 2 female) and were subjected to a tensile loading protocol. A subset of contralateral tissues from a single donor was analyzed using bright-field, polarized light, and transmission electron microscopy to measure collagen fiber morphology., Results: The pediatric MCL exhibited values for ultimate stress (11.7 ± 6.7 MPa), ultimate strain (18.2% ± 6.8%), and the Young modulus (93.7 ± 56.5 MPa) that were similar to values for the LCL (11.4 ± 11.5 MPa, 27.7% ± 12.9%, and 64.4 ± 76.6 MPa, respectively). The PCL demonstrated decreased ultimate stress (4.2 ± 1.8 MPa), increased ultimate strain (28.8% ± 11.9%), and a decreased Young modulus (19.8 ± 10.4 MPa) when compared with the MCL and LCL. All 3 ligaments had similar mean crimp wavelengths (MCL, 32.8 ± 3.6 µm; LCL, 27.2 ± 3.5 µm; PCL, 25.8 ± 3.5 µm) and collagen fibril diameters (MCL, 88.0 ± 26.0 nm; LCL, 93.3 ± 34.6 nm; PCL, 90.9 ± 34.0 nm); however, the fibril distribution profiles exhibited different modalities., Conclusion: The pediatric MCL and LCL possessed similar mechanical properties, while the pediatric PCL was weaker but capable of withstanding higher amounts of strain. All 3 of these pediatric structures were weaker than what has been reported in studies with adult cohorts., Clinical Relevance: Results from this study can be considered preliminary mechanical and microstructural data for healthy pediatric collateral and posterior cruciate ligaments that can be used to guide further laboratory and clinical research., Competing Interests: One or more of the authors has declared the following potential conflict of interest or source of funding: This study was supported by the Penn Center for Musculoskeletal Disorders Histology Core (NIH P30-AR06919) and the Electron Microscopy Resource Laboratory of the University of Pennsylvania, and were pediatric tissues were donated by AlloSource. T.J.G. receives research support from AlloSource, Vericel, and Liberty Surgical and has received hospitality payments from Arthrex. K.G.S. has received research support from AlloSource, Vericel, DePuy Synthes, and Sanofi-Aventis and is an unpaid consultant for Clinical Data Solutions and Source Trust. M.W.H. receives research support from DePuy Synthes, Integra LifeSciences, and Zimmer Biomet. AOSSM checks author disclosures against the Open Payments Database (OPD). AOSSM has not conducted an independent investigation on the OPD and disclaims any liability or responsibility relating thereto.

A cadaveric study was performed to investigate the external mechanical forces required to fracture maxillary fourth premolar teeth in domestic dogs and describe a clinically relevant model of chewing forces placed on functionally important teeth in which fracture patterns are consistent with those defined by the American Veterinary Dental College (AVDC). Twenty-four maxillary fourth premolar teeth were harvested from dog cadavers. Samples consisted of teeth with surrounding alveolar bone potted in polycarbonate cylinders filled with acrylic. The cylinders were held by an aluminum device at an angle of 60° with respect to the ground. An axial compression test was performed, creating a force upon the occluso-palatal aspects of the main cusps of the crowns of the teeth. The highest compressive force prior to failure was considered the maximum force sustained by the teeth. Results showed the mean maximum force (± SD) sustained by the tested teeth at the point of fracture was 1,281 N (± 403 N) at a mean impact angle (± SD) of 59.7° (± 5.2°). The most common fracture type that occurred among all samples was a complicated crown fracture ( n = 12), followed by an uncomplicated crown fracture ( n = 6), complicated crown-root fracture ( n = 5), and uncomplicated crown-root fracture ( n = 1). There was no statistically significant correlation between dog breed, age, weight, impact angle, crown height or crown diameter, and the maximum force applied at the point of fracture. The only independent variable that remained significantly associated with maximum force was the crown height to diameter ratio ( p = 0.005), suggesting that a decreased ratio increases tooth fracture resistance. The methodology described herein has been successful in creating a pattern of fracture of maxillary fourth premolar teeth consistent with that defined by the AVDC under angled compression at forces within the maximum chewing capability of the average domestic dog.

Background: Over the past several decades, there has been a steady increase in pediatric anterior cruciate ligament (ACL) tears, particularly in young female basketball and soccer players. Because allograft tissue for pediatric ACL reconstruction (ACLR) has shown high rates of failure, autograft tissue may be the best option for ACLR in this population. However, differences in the structure and mechanical behavior of these tissues are not clear., Purpose: To characterize the mechanical and microstructural properties in pediatric ACLs and autograft tissues using a rare cadaveric cohort (mean age, 9.2 years)., Study Design: Descriptive laboratory study., Methods: ACLs, patellar tendons, quadriceps tendons, semitendinosus tendons, and iliotibial bands (ITBs) were harvested from 5 fresh-frozen pediatric knee specimens (3 male, 2 female) and subjected to a tensile loading protocol. A subset of contralateral tissues was analyzed using bright-field, polarized light, and transmission electron microscopy., Results: Patellar tendons exhibited values for ultimate stress (5.2 ± 3.1 MPa), ultimate strain (35.3% ± 12.5%), and the Young modulus (27.0 ± 8.8 MPa) that were most similar to the ACLs (5.2 ± 2.2 MPa, 31.4% ± 9.9%, and 23.6 ± 15.5 MPa, respectively). Semitendinosus tendons and ITBs were stronger but less compliant than the quadriceps or patellar tendons. ITBs exhibited crimp wavelengths (27.0 ± 2.9 μm) and collagen fibril diameters (67.5 ± 19.5 nm) that were most similar to the ACLs (24.4 ± 3.2 μm and 65.3 ± 19.9 nm, respectively)., Conclusion: The mechanical properties of the patellar tendon were almost identical to those of the ACL. The ITB exhibited increased strength and a similar microstructure to the native ACL. These findings are not entirely congruent with studies examining adult tissues., Clinical Relevance: These results can be used to inform further clinical research. In particular, they justify a further examination of the biomechanical and microstructural properties of the ITB in the context of its role as an autograft tissue in pediatric ACL reconstruction., Competing Interests: One or more of the authors has declared the following potential conflict of interest or source of funding: This study was supported by the Penn Center for Musculoskeletal Disorders Histology Core (NIH P30-AR06919) and the Electron Microscopy Resource Laboratory of the University of Pennsylvania, and pediatric tissues were donated by AlloSource. T.J.G. receives research support from AlloSource, Vericel, and Liberty Surgical and has received hospitality payments from Arthrex. K.G.S. receives research support from AlloSource, Vericel, DePuy Synthes, and Sanofi-Aventis and is an unpaid consultant for Clinical Data Solutions. M.W.H. receives research support from DePuy Synthes, Integra LifeSciences, and Zimmer Biomet. AOSSM checks author disclosures against the Open Payments Database (OPD). AOSSM has not conducted an independent investigation on the OPD and disclaims any liability or responsibility relating thereto.

Modeling joint contact in OpenSim is not well understood. This study systematically investigated the variables associated with the elastic foundation contact model within OpenSim by performing a series of controlled benchtop experiment and concomitant simulations. Four metal-on-plastic interactions were modeled, including a model of a total knee replacement (TKR). Load-displacement curves were recorded during cyclic loading between 100 and 750 N. Geometries were imported and into OpenSim and contact mechanics were modeled with the on-board elastic foundation algorithm. A hybrid optimization algorithm determined that stiffness and dissipation coefficients for TKR implants were 1.52 × 10 10  N/m and 57.7 Ns/m, respectively. Estimations of contact forces were 10.2% of blinded experimental data (average root mean square error: 76.82 ± 11.47 N). In the second portion of this study, freely available eTibia TKR renderings were used to test the ubiquity of the tuning parameters. They were also used to perform a sensitivity analysis of material stiffness and mesh density with regard to penetration depth and computational time. When a stiffness of 1 × 10 10 was applied to an eTibia model with 5000 faces, a 100 kg load caused 0.259 mm of penetration. Under the same conditions, the tuned model experienced 0.300 mm of penetration. Material stiffnesses between 1 × 10 13 and 1 × 10 15  N/m increased computation time by factors of 12-23. This study provides much needed clarity regarding the use of the OpenSim EF algorithm. It also demonstrates the utility of OpenSim to model deformable materials and complex geometries, and this approach can be adapted to make reasonable estimations for both natural and surgically modified joints., (Copyright © 2018 Elsevier Ltd. All rights reserved.)

Hardware-related complications can occur when plate fixation is used to stabilize osteoporotic fractures involving the olecranon. The use of an additional nonlocking screw, placed retrograde into the proximal fracture segment, may improve stability under load. The purpose of this study was to conduct a biomechanical comparison of olecranon repair constructs with and without this additional retrograde screw. Nine matched pairs of elderly fresh-frozen cadaveric upper extremities were used. Two-part olecranon fractures were modeled, and fracture stabilization was performed. Olecranon plates were implanted either with the standard surgical technique (CTRL) or with an additional retrograde screw (EXPT). Dynamic extensions of increasingly loaded forearms were performed, and comparisons of sustained cycles, maximum load, and total work were made. Relative motion of bone segments was tracked, and modes of failure were assessed. Seventy-eight percent of specimens from the CTRL group failed due to relative fragment displacement exceeding 3 mm, while 78% of EXPT specimens failed due to instantaneous catastrophic failure. There were no significant differences in terms of number of survived cycles, maximum load, or work performed between the groups. The addition of a retrograde screw in this plating technique changes the failure mode from fracture displacement to catastrophic failure. The use of a 3.5-mm retrograde screw in the relatively small proximal ulnar fragment should be avoided, but screws with a smaller diameter may still have potential to improve fixation. Further biomechanical and clinical research is necessary to improve strategies for plate fixation of olecranon fractures in the elderly population. [Orthopedics. 2019; 42(1):e74-e80.]., (Copyright 2018, SLACK Incorporated.)

Background: Plantarflexor structure is an important predictor of function in healthy, athletic, and some patient populations. Computational simulations are powerful tools capable of testing the isolated effects of muscle-tendon structure on gait function., Research Question: The purpose of this study was to characterize the sensitivity of plantarflexor muscle function based on muscle-tendon unit (MTU) parameters. We hypothesized that plantarflexor metabolics and shortening dynamics would be sensitive to MTU parameters., Methods: Stance phase of gait was simulated using a musculoskeletal model and computed muscle control algorithm. Optimal muscle fiber length, resting ankle angle, and tendon stiffness parameters were systematically changed to test these effects on plantarflexor metabolics, activation, and power. Dorsiflexor metabolics were also measured to determine the impact of the action of the antagonist muscle group., Results and Significance: Plantarflexor metabolic demands were 1.5 and 2.7 times more sensitive to optimal fiber length and resting ankle angle, respectively, compared to the effect of tendon stiffness. Increased resting ankle plantarflexion induced a large passive plantarflexion moment during early stance, which required non-physiologic dorsiflexor contractions. Conversely, longer optimal fiber and more neutral resting ankle angles increased the shortening demands of the plantarflexors. These findings highlight the importance of carefully selecting MTU parameters when modeling gait with musculoskeletal models, especially in pathologic or high-performance athlete populations., (Copyright © 2018 Elsevier B.V. All rights reserved.)

Superior capsular reconstruction has received increased attention as a surgical technique to address massive "irreparable" rotator cuff tears; however, the functional limitations and surgical techniques associated with this repair have yet to be sufficiently explored. The goal of this study was to utilize a multidisciplinary approach to characterize the biomechanics of this repair by: (i) identifying activities of daily living that may overburden the graft; and (ii) optimizing surgical techniques used during implantation. This experiment was completed in three phases. First, graft failure mechanics were characterized by performing an in vitro experiment. Second, in vivo shoulder kinematics associated with various activities were recorded with 3-D motion capture techniques. Finally, an in silico model was used to assess graft strains. Results show that motions involving posterior shoulder rotation, such as back washing, lead to graft strains that may cause failure. Output from the optimization suggests that orienting the humerus in approximately 25° abduction, and 20° internal rotation during implantation will result in optimal graft performance. Clinical Significance: The novel paradigm used in this study demonstrates the utility of coupling in vitro, in vivo, and in silico modeling techniques in one cohesive experiment. This paradigm presents an additional tool, aside from clinical studies and cadaveric experimentation, to better predict and understand the strengths and limitations of superior capsular reconstruction. This approach has potential to be translated to other soft tissue repairs and may provide valuable information to clinicians and rehabilitative specialists to manage patient expectations and guide rehabilitation. © 2018 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 36:2789-2796, 2018., (© 2018 Orthopaedic Research Society. Published by Wiley Periodicals, Inc.)

Background: Tendon injuries are common problems among athletes. Complete recovery of the mechanical structure and function of ruptured tendons is challenging. It has been demonstrated that upregulation of glycolysis and lactate production occurs in wounds, inflammation sites, and cancerous tumors, and these metabolic changes also control growth and differentiation of stem and progenitor cells. Similar metabolic changes have been reported in human healing tendons. In addition, lactate production has increased in progenitors isolated from injured tendons after treatment with IL-1β. It is thought that the metabolic changes play a role in tendon healing after injury., Hypothesis: Glucose metabolism is altered during tendon injury and healing, and modulation of this altered metabolism improves tendon repair., Study Design: Controlled laboratory study., Methods: The authors used the tendon injury model involving a complete incision of the Achilles tendon in C57BL/6J female mice and studied alterations of glucose metabolism in injured tendons with [U- 13 C]glucose and metabolomics analysis 1 and 4 weeks after surgery. They also examined the effects of dichloroacetate (DCA; an indirect lactate synthesis inhibitor) treatment on the recovery of structure and mechanical properties of injured tendons 4 weeks after surgery in the same mouse model., Results: Significant changes in glucose metabolism in tendons after injury surgery were detected. 13 C enrichment of metabolites and intermediates, flux through glycolysis, and lactate synthesis, as well as tricarboxylic acid cycle activity, were acutely increased 1 week after injury. Increased glycolysis and lactate generation were also found 4 weeks after injury. DCA-treated injured tendons showed decreased cross-sectional area and higher values of modulus, maximum stress, and maximum force when compared with vehicle-treated injured tendons. Improved alignment of the collagen fibers was also observed in the DCA group. Furthermore, DCA treatment reduced mucoid accumulation and ectopic calcification in injured tendons., Conclusion: The findings indicate that injured tendons acutely increase glycolysis and lactate synthesis after injury and that the inhibition of lactate synthesis by DCA is beneficial for tendon healing., Clinical Relevance: Changing metabolism in injured tendons may be a therapeutic target for tendon repair.

The "Oxford Rig" cadaveric simulator permits researchers and clinicians to study knee mechanics during a simulated squatting motion. The motion of the lower limb in the Oxford Rig is typically controlled by a single actuator that applies tension to the quadriceps tendon. The location of the quadriceps actuator, however, has differed across published descriptions of the Oxford Rig. Actuators have been placed on the femur and pelvis, and on "grounded" locations external to the specimen, but the consequences of this placement for knee kinematics and kinetics are unknown. The purpose of this study was to examine these effects using a validated computational musculoskeletal model. When the actuator was placed on the femur or pelvis, forces realistically increased with knee flexion, with quadriceps and patellofemoral contact forces exceeding 2000 N and 3000 N, respectively, at 100° flexion. When the actuator was grounded, however, forces were substantially reduced and did not monotonically increase with flexion. Articular joint contact forces were not strongly influenced by changing the location of the actuator from the femur to the pelvis, with small RMS differences in quadriceps forces (48.2 N), patellofemoral forces (83.6 N), and tibiofemoral forces (58.9 N) between these conditions. The location of the actuator did not substantially affect knee kinematics. The results of this study suggest that the quadriceps actuator of the Oxford Rig should be attached to either the femur or the pelvis when the goal is to make realistic estimates of quadriceps forces and articular contact forces within the knee joint., (Copyright © 2018 Elsevier Ltd. All rights reserved.)

High-resolution MRI-derived finite element analysis (FEA) has been used in translational research to estimate the mechanical competence of human bone. However, this method has yet to be validated adequately under in vivo imaging spatial resolution or signal-to-noise conditions. We therefore compared MRI-based metrics of bone strength to those obtained from direct, mechanical testing. The study was conducted on tibiae from 17 human donors (12 males and five females, aged 33 to 88years) with no medical history of conditions affecting bone mineral homeostasis. A 25mm segment from each distal tibia underwent MR imaging in a clinical 3-Tesla scanner using a fast large-angle spin-echo (FLASE) sequence at 0.137mm×0.137mm×0.410mm voxel size, in accordance with in vivo scanning protocol. The resulting high-resolution MR images were processed and used to generate bone volume fraction maps, which served as input for the micro-level FEA model. Simulated compression was applied to compute stiffness, yield strength, ultimate strength, modulus of resilience, and toughness, which were then compared to metrics obtained from mechanical testing. Moderate to strong positive correlations were found between computationally and experimentally derived values of stiffness (R 2 =0.77, p<0.0001), yield strength (R 2 =0.38, p=0.0082), ultimate strength (R 2 =0.40, p=0.0067), and resilience (R 2 =0.46, p=0.0026), but only a weak, albeit significant, correlation was found for toughness (R 2 =0.26, p=0.036). Furthermore, experimentally derived yield strength and ultimate strength were moderately correlated with MRI-derived stiffness (R 2 =0.48, p=0.0022 and R 2 =0.58, p=0.0004, respectively). These results suggest that high-resolution MRI-based finite element (FE) models are effective in assessing mechanical parameters of distal skeletal extremities., (Copyright © 2017 Elsevier Inc. All rights reserved.)

Introduction: In locked plate fixation of proximal humerus fractures, the calcar is an important anchor point for screws providing much-needed medial column support. Most locking plate implants utilize a fixed-trajectory locking screw to achieve this goal. Consequently, adjustments of plate location to account for patient-specific anatomy may result in a screw position outside of the calcar. To date, little is known about the consequences of "missing" the calcar during plate positioning. This study sought to characterize the biomechanics associated with proximal and distal placement of locking plates in a two-part fracture model., Materials and Methods: This experiment was performed twice, first with elderly cadaveric specimens and again with osteoporotic sawbones. Two-part fractures were simulated and specimens were divided to represent proximal, neutral, and distal plate placements. Non-destructive torsional and axial compression tests were performed prior to an axial fatigue test and a ramp to failure. Torsional stiffness, axial stiffness, humeral head displacement and stiffness during fatigue testing, and ultimate load were compared between groups., Results: Cadavers: Proximal implant placement led to trends of decreased mechanical properties, but there were no significant differences found between groups. Sawbones: Distal placement increased torsional stiffness in both directions (p = 0.003, p = 0.034) and axial stiffness (p = 0.018) when compared to proximal placement. Distal placement also increased torsional stiffness in external rotation (p = 0.020), increased axial stiffness (p = 0.024), decreased humeral head displacement during fatigue testing, and increased stiffness during fatigue testing when compared to neutral placement., Discussion: The distal and neutral groups had similar mechanical properties in many cadaveric comparisons while the proximal group trended towards decreased construct stiffness., Results: from the Sawbones model were more definitive and provided further evidence that proximal calcar screw placements are undesirable and distal implant placement may provide improved construct stability., Conclusion: Successful proximal humerus fracture reconstruction is inherent upon anatomic fracture reduction coupled with medial column support. Results from this experiment suggest that missing the calcar proximally is deleterious to fixation strength, while it is safe, and perhaps even desirable, to aim slightly distal to the intended target., (Copyright © 2018 Elsevier Ltd. All rights reserved.)

There currently exists an array of operative strategies to manage Lisfranc injuries. Modular fixation systems present surgeons with a choice between fully threaded solid cortical (FSC) and partially threaded cannulated cancellous (PCC) bone screws when using a transarticular screw approach. It is currently unknown how screw design influences fixation strength in Lisfranc reconstructions. The purpose of this study was to evaluate the biomechanical differences of FSC and PCC screws using a cadaveric model of a simulated Lisfranc injury and controlled benchtop experiments. Ten matched pairs of cadaveric feet received an acute Lisfranc injury and were repaired with FSC or PCC screws. Diastasis was measured between the medial and intermediate cuneiforms and the first and second metatarsals during simulations of partial weight bearing. Three-point bending and axial pull-out tests were performed to characterize screw mechanics that could not be measured within the cadaveric model. Screw design did not affect cuneiform or metatarsal diastasis. Neither screw loosening nor deformation was observed following cadaveric testing. Bending tests indicated FSC screws had higher ultimate strength, but there was no significant difference in yield load. Partially threaded cannulated cancellous bone screws exhibited superior axial pull-out strength. Fully threaded solid cortical and PCC screws provide equal amounts of fixation strength during partial weight bearing and similar resistance to deformation under bending loads. Partially threaded cannulated cancellous screws may simplify the operative procedure and minimize nonoptimal screw placement. If a clinician so desires, PCC screws may be used in lieu of FSC screws without sacrificing fixation strength. [Orthopedics. 2018; 41(2):e222-e227.]., (Copyright 2018, SLACK Incorporated.)

Background: Locking plate fixation strength relies on axial alignment of the screw axis and plate hole, with small deviations in alignment substantially decreasing the load to failure. In an effort to overcome this technical deficiency, polyaxial locking plates were designed to provide increased flexibility of screw positioning with the intent of not sacrificing fixation strength. The purpose of this article is to review the variety of polyaxial locking mechanisms currently available, to compare the biomechanical performance of these designs, and to highlight their differences, which may have clinical implications., Methods: A systematic review using the search terms "polyaxial locking," "variable angle locking," "polyaxial screws," and "variable angle screws" was conducted to identify all English-language articles assessing variable-angle locking screw technology. All articles directly comparing the biomechanical performance of polyaxial locking technologies were included., Results: Polyaxial locking is achieved by 5 described mechanisms: point-loading thread-in, cut-in, locking cap, expansion bushing, and screw-head expansion. With increasing insertion angulation, point-loading thread-in and cut-in designs demonstrate reduced failure strength. However, locking-cap fixation maintains consistent failure strength with increasing off-axis insertion angles., Conclusions: Reports comparing polyaxial locking technologies are limited. The current biomechanical literature raises concerns that these mechanisms have various strengths and performance characteristics. Based on the results of the few studies that exist, it appears that locking-cap fixation provides superior biomechanical strength when compared with point-loading and cut-in designs. Additional studies are needed to assess variable-angle locking mechanisms more completely.

Objectives: This study sought to examine fatigue characteristics of 2 polyaxial locking screw designs: locking cap (LC) and cross-threaded (CT). The goal was to compare LC and CT implants at 0, 10, and 15 degrees of angulation to determine the effect of locking mechanism on screw-plate interface failure. The hypothesis was that LC implants would have superior fatigue properties in comparison to CT designs and that increased angulation of the screw would have a negative impact on the fatigue life of CT implants, but would not have any effect on LC implants., Methods: A total of 72 screws were tested in 4 upper extremity implants. Implants were subjected to cyclic shear loads and subsequent ramp to failure. Performance characteristics were statistically compared using nonparametric statistical methods., Results: Fatigue testing demonstrated that LC designs were consistently able to sustain a significantly higher number of cyclic loads than CT designs. There were no significant differences in the number of cycles sustained by LC designs because of changes in screw angle, but CT implants exhibited decreases in screw stability with increasing angulation., Conclusions: Likely because of the spherical screw head geometry, LC fatigue characteristics are not influenced by the orientation of the screw relative to the plate. Application of an LC in the operating room requires additional time, but provides significantly more robust fixation of the screw, especially at oblique angles to the plate and provides a more predictable and consistent biomechanical result.