Search

In semiconductor hole spin qubits, low magnetic field ($B$) operation extends the coherence time ($T_\mathrm{2}^*$) but proportionally reduces the gate speed. In contrast, singlet-triplet (ST) qubits are primarily controlled by the exchange interaction ($J$) and can thus maintain high gate speeds even at low $B$. However, a large $J$ introduces a significant charge component to the qubit, rendering ST qubits more vulnerable to charge noise when driven. Here, we demonstrate a highly coherent ST hole spin qubit in germanium, operating at both low $B$ and low $J$. By modulating $J$, we achieve resonant driving of the ST qubit, obtaining an average gate fidelity of $99.68\%$ and a coherence time of $T_\mathrm{2}^*=1.9\,\mu$s. Moreover, by applying the resonant drive continuously, we realize a dressed ST qubit with a tenfold increase in coherence time ($T_\mathrm{2\rho}^*=20.3\,\mu$s). Frequency modulation of the driving signal enables universal control, with an average gate fidelity of $99.64\%$. Our results demonstrate the potential for extending coherence times while preserving high-fidelity control of germanium-based ST qubits, paving the way for more efficient operations in semiconductor-based quantum processors.

Hole spins in Ge/SiGe heterostructure quantum dots have emerged as promising qubits for quantum computation. The strong spin-orbit coupling (SOC), characteristic of heavy-hole states in Ge, enables fast and all-electrical qubit control. However, SOC also increases the susceptibility of spin qubits to charge noise. While qubit coherence can be significantly improved by operating at sweet spots with reduced hyperfine or charge noise sensitivity, the latter ultimately limits coherence, underlining the importance of understanding and reducing charge noise at its source. In this work, we study the voltage-induced hysteresis commonly observed in SiGe-based quantum devices and show that the dominant charge fluctuators are localized at the semiconductor-oxide interface. By applying increasingly negative gate voltages to Hall bar and quantum dot devices, we investigate how the hysteretic filling of interface traps impacts transport metrics and charge noise. We find that the gate-induced accumulation and trapping of charge at the SiGe-oxide interface leads to an increased electrostatic disorder, as probed by transport measurements, as well as the activation of low-frequency relaxation dynamics, resulting in slow drifts and increased charge noise levels. Our results highlight the importance of a conservative device tuning strategy and reveal the critical role of the semiconductor-oxide interface in SiGe heterostructures for spin qubit applications.

In gate-based dispersive sensing, the response of a resonator attached to a quantum dot gate is detected by a reflected radio-frequency signal. This enables fast readout of spin qubits and tune up of arrays of quantum dots, but comes at the expense of increased susceptibility to crosstalk, as the resonator can amplify spurious signals and induce fluctuations in the quantum dot potential. We attach tank circuits with superconducting NbN inductors and internal quality factors $Q_{\mathrm{i}}$>1000 to the interdot barrier gate of silicon double quantum dot devices. Measuring the interdot transition in transport, we quantify radio-frequency crosstalk that results in a ring-up of the resonator when neighbouring plunger gates are driven with frequency components matching the resonator frequency. This effect complicates qubit operation and scales with the loaded quality factor of the resonator, the mutual capacitance between device gate electrodes, and with the inverse of the parasitic capacitance to ground. Setting qubit frequencies below the resonator frequency is expected to substantially suppress this type of crosstalk., Comment: 7 pages, 4 figures, supplementary information

We report observations of transitions between excited states in the Jaynes-Cummings ladder of circuit quantum electrodynamics with electron spins (spin circuit QED). We show that unexplained features in recent experimental work correspond to such transitions and present an input-output framework that includes these effects. In new experiments, we first reproduce previous observations and then reveal both excited-state transitions and multiphoton transitions by increasing the probe power and using two-tone spectroscopy. This ability to probe the Jaynes-Cummings ladder is enabled by improvements in the coupling-to-decoherence ratio, and shows an increase in the maturity of spin circuit QED as an interesting platform for studying quantum phenomena., Comment: 12 pages, 7 figures

We report the coherent coupling of two electron spins at a distance via virtual microwave photons. Each spin is trapped in a silicon double quantum dot at either end of a superconducting resonator, achieving spin-photon couplings up to around $g_s/2\pi = 40 \ \text{MHz}$. As the two spins are brought into resonance with each other, but detuned from the photons, an avoided crossing larger than the spin linewidths is observed with an exchange splitting around $2J/2\pi = 20 \ \text{MHz}$. In addition, photon-number states are resolved from the shift $2\chi_s/2\pi = -13 \ \text{MHz}$ that they induce on the spin frequency. These observations demonstrate that we reach the strong dispersive regime of circuit quantum electrodynamics with spins. Achieving spin-spin coupling without real photons is essential to long-range two-qubit gates between spin qubits and scalable networks of spin qubits on a chip.

Circuit quantum electrodynamics (QED) employs superconducting microwave resonators as quantum buses. In circuit QED with semiconductor quantum-dot-based qubits, increasing the resonator impedance is desirable as it enhances the coupling to the typically small charge dipole moment of these qubits. However, the gate electrodes necessary to form quantum dots in the vicinity of a resonator inadvertently lead to a parasitic port through which microwave photons can leak, thereby reducing the quality factor of the resonator. This is particularly the case for high-impedance resonators, as the ratio of their total capacitance over the parasitic port capacitance is smaller, leading to larger microwave leakage than for 50-$\Omega$ resonators. Here, we introduce an implementation of on-chip filters to suppress the microwave leakage. The filters comprise a high-kinetic-inductance nanowire inductor and a thin-film capacitor. The filter has a small footprint and can be placed close to the resonator, confining microwaves to a small area of the chip. The inductance and capacitance of the filter elements can be varied over a wider range of values than their typical spiral inductor and interdigitated capacitor counterparts. We demonstrate that the total linewidth of a 6.4 GHz and approximately 3-k$\Omega$ resonator can be improved down to 540 kHz using these filters.

High-fidelity single-shot readout of spin qubits requires distinguishing states much faster than the T1 time of the spin state. One approach to improving readout fidelity and bandwidth (BW) is cryogenic amplification, where the signal from the qubit is amplified before noise sources are introduced and room-temperature amplifiers can operate at lower gain and higher BW. We compare the performance of two cryogenic amplification circuits: a current-biased heterojunction bipolar transistor circuit (CB-HBT), and an AC-coupled HBT circuit (AC-HBT). Both circuits are mounted on the mixing-chamber stage of a dilution refrigerator and are connected to silicon metal oxide semiconductor (Si-MOS) quantum dot devices on a printed circuit board (PCB). The power dissipated by the CB-HBT ranges from 0.1 to 1 {\mu}W whereas the power of the AC-HBT ranges from 1 to 20 {\mu}W. Referred to the input, the noise spectral density is low for both circuits, in the 15 to 30 fA/$\sqrt{\textrm{Hz}}$ range. The charge sensitivity for the CB-HBT and AC-HBT is 330 {\mu}e/$\sqrt{\textrm{Hz}}$ and 400 {\mu}e/$\sqrt{\textrm{Hz}}$, respectively. For the single-shot readout performed, less than 10 {\mu}s is required for both circuits to achieve bit error rates below $10^{-3}$, which is a putative threshold for quantum error correction., Comment: 11 pages, 13 figures

Spin-orbit coupling is relatively weak for electrons in bulk silicon, but enhanced interactions are reported in nanostructures such as the quantum dots used for spin qubits. These interactions have been attributed to various dissimilar interface effects, including disorder or broken crystal symmetries. In this Letter, we use a double-quantum-dot qubit to probe these interactions by comparing the spins of separated singlet-triplet electron pairs. We observe both intravalley and intervalley mechanisms, each dominant for [110] and [100] magnetic field orientations, respectively, that are consistent with a broken crystal symmetry model. We also observe a third spin-flip mechanism caused by tunneling between the quantum dots. This improved understanding is important for qubit uniformity, spin control and decoherence, and two-qubit gates.

Qubits based on transistor-like Si MOS nanodevices are promising for quantum computing. In this work, we demonstrate a double quantum dot spin qubit that is all-electrically controlled without the need for any external components, like micromagnets, that could complicate integration. Universal control of the qubit is achieved through spin-orbit-like and exchange interactions. Using single shot readout, we show both DC- and AC-control techniques. The fabrication technology used is completely compatible with CMOS., Comment: The conference proceedings version incorrectly displays the orientation of the magnetic field in figure 1; this version is correct

The silicon metal-oxide-semiconductor (MOS) material system is technologically important for the implementation of electron spin-based quantum information technologies. Researchers predict the need for an integrated platform in order to implement useful computation, and decades of advancements in silicon microelectronics fabrication lends itself to this challenge. However, fundamental concerns have been raised about the MOS interface (e.g. trap noise, variations in electron g-factor and practical implementation of multi-QDs). Furthermore, two-axis control of silicon qubits has, to date, required the integration of non-ideal components (e.g. microwave strip-lines, micro-magnets, triple quantum dots, or introduction of donor atoms). In this paper, we introduce a spin-orbit (SO) driven singlet-triplet (ST) qubit in silicon, demonstrating all-electrical two-axis control that requires no additional integrated elements and exhibits charge noise properties equivalent to other more model, but less commercially mature, semiconductor systems. We demonstrate the ability to tune an intrinsic spin-orbit interface effect, which is consistent with Rashba and Dresselhaus contributions that are remarkably strong for a low spin-orbit material such as silicon. The qubit maintains the advantages of using isotopically enriched silicon for producing a quiet magnetic environment, measuring spin dephasing times of 1.6 $\mu$s using 99.95% $^{28}$Si epitaxy for the qubit, comparable to results from other isotopically enhanced silicon ST qubit systems. This work, therefore, demonstrates that the interface inherently provides properties for two-axis control, and the technologically important MOS interface does not add additional detrimental qubit noise., Comment: Submitted July 13, 2017. Supplementary information included with the paper

Si-MOS based QD qubits are attractive due to their similarity to the current semiconductor industry. We introduce a highly tunable MOS foundry compatible qubit design that couples an electrostatic quantum dot (QD) with an implanted donor. We show for the first time coherent two-axis control of a two-electron spin qubit that evolves under the QD-donor exchange interaction and the hyperfine interaction with the donor nucleus. The two interactions are tuned electrically with surface gate voltages to provide control of both qubit axes. Qubit decoherence is influenced by charge noise, which is of similar strength as epitaxial systems like GaAs and Si/SiGe.

The readout of semiconductor spin qubits based on spin blockade is fast but suffers from a small charge signal. Previous work suggested large benefits from additional charge mapping processes, however uncertainties remain about the underlying mechanisms and achievable fidelity. In this work, we study the single-shot fidelity and limiting mechanisms for two variations of an enhanced latching readout. We achieve average single-shot readout fidelities > 99.3% and > 99.86% for the conventional and enhanced readout respectively, the latter being the highest to date for spin blockade. The signal amplitude is enhanced to a full one-electron signal while preserving the readout speed. Furthermore, layout constraints are relaxed because the charge sensor signal is no longer dependent on being aligned with the conventional (2, 0) - (1, 1) charge dipole. Silicon donor-quantum-dot qubits are used for this study, for which the dipole insensitivity substantially relaxes donor placement requirements. One of the readout variations also benefits from a parametric lifetime enhancement by replacing the spin-relaxation process with a charge-metastable one. This provides opportunities to further increase the fidelity. The relaxation mechanisms in the different regimes are investigated. This work demonstrates a readout that is fast, has one-electron signal and results in higher fidelity. It further predicts that going beyond 99.9% fidelity in a few microseconds of measurement time is within reach., Comment: Supplementary information is included with the paper

Silicon-based metal-oxide-semiconductor quantum dots are prominent candidates for high-fidelity, manufacturable qubits. Due to silicon's band structure, additional low-energy states persist in these devices, presenting both challenges and opportunities. Although the physics governing these valley states has been the subject of intense study, quantitative agreement between experiment and theory remains elusive. Here, we present data from a new experiment probing the valley states of quantum dot devices and develop a theory that is in quantitative agreement with both the new experiment and a recently reported one. Through sampling millions of realistic cases of interface roughness, our method provides evidence that, despite radically different processing, the valley physics between the two samples is essentially the same. This work provides the first evidence that valley splitting can be deterministically predicted and controlled in metal oxide semiconductor quantum dots, a critical requirement for such systems to realize a reliable qubit platform., Comment: 7 pages, 4 figures

Individual donors in silicon chips are used as quantum bits with extremely low error rates. However, physical realizations have been limited to one donor because their atomic size causes fabrication challenges. Quantum dot qubits, in contrast, are highly adjustable using electrical gate voltages. This adjustability could be leveraged to deterministically couple donors to quantum dots in arrays of qubits. In this work, we demonstrate the coherent interaction of a $^{31}$P donor electron with the electron of a metal-oxide-semiconductor quantum dot. We form a logical qubit encoded in the spin singlet and triplet states of the two-electron system. We show that the donor nuclear spin drives coherent rotations between the electronic qubit states through the contact hyperfine interaction. This provides every key element for compact two-electron spin qubits requiring only a single dot and no additional magnetic field gradients, as well as a means to interact with the nuclear spin qubit., Comment: Published version

In this work, we demonstrate a silicon nanocrystal Field Effect Transistor (ncFET). Its operation is similar to that of a Tunnelling Field Effect Transistor (TFET) with two barriers in series. The tunnelling barriers are fabricated in very thin silicon dioxyde and the channel in intrinsic polycrystalline silicon. The absence of doping eliminates the problem of achieving sharp doping profiles at the junctions, which has proven a challenge for large-scale integration and in principle allows scaling down the atomic level. The demonstrated ncFET features a 10$^4$ on/off current ratio at room temperature, a low 30 pA/$\mu$m leakage current at a 0.5 V bias, an on-state current on a par with typical all-Si TFETs and bipolar operation with high symmetry. Quantum dot transport spectroscopy is used to assess the band structure and energy levels of the silicon island., Comment: Copyright 2014 American Institute of Physics. This article may be downloaded for personal use only. Any other use requires prior permission of the author and the American Institute of Physics. The following article appeared in Appl. Phys. Lett. 104, 193505 (2014) and may be found at http://scitation.aip.org/content/aip/journal/apl/104/19/10.1063/1.4876765. 4 pages, 3 figures

Inductively Coupled Plasma (ICP) etching of amorphous silicon (a-Si) nanostructures using a continuous C4F8/SF6 plasma over nanotopography in silicon dioxide (SiO2) is investigated. The coil power of the ICP system is used to tune the a-Si etch rate from 20 to 125 nm/min. The etch rates of a-Si, SiO2 and electroresist are measured depending on the SF6 ratio, platen power and chamber pressure and used to optimize the a-Si:SiO2 etch selectivity. The results on nanostructures show that the presence of an insulating etch-stop layer affects the passivation ratio required to achieve vertical sidewalls. A low pressure is also necessary in order to etch the silicon nanostructure embedded into the oxide nanotrenches to form a highly conformable a-Si nanowire. We argue that both of these behaviors could be explained by surface charging effects. Finally, etching of 20 nm a-Si nanowires that cross 15 nm trenches in oxide with vertical sidewalls and a 4.3:1 a-Si:SiO2 etch selectivity is demonstrated. This etching process can be used in applications where nanotopography is present such as single electron transistors or multigate transistors., Comment: 10 pages, supplementary material included