Search

There is increasing interest in the use of virtual reality (VR) for training and simulation. While visual and auditory VR displays have improved markedly, the presentation of haptic (tactile and proprioceptive) cues remains challenging and poses limits on users' manual interaction with the virtual environment. We examined interaction with a physical touchscreen and with a virtual touchscreen in VR using a standardized Fitts' tapping task. We examined the effect on the performance of cues to touch of the screen (contact feedback) or to the accuracy of pointing to targets (error feedback) delivered via the auditory modality. For the touchscreen, error feedback reduced target misses while maintaining the efficiency of movement (throughput). In VR, error feedback reduced misses but also reduced throughput due to a disproportionate slowing of movements. Auditory cues to contact significantly improved throughput in VR but not for the touchscreen, possibly because the touchscreen provided robust tactile and proprioceptive cues to contact. The improvement in throughput with auditory contact feedback in VR was of a similar magnitude to that previously reported for haptic contact feedback, but smaller than that reported for veridical haptic cues. These results suggest that auditory stimuli are able to substitute in a limited manner in the absence of tactile or proprioceptive stimulation in VR environments. [ABSTRACT FROM AUTHOR]

In current virtual reality settings for motor skill training, only visual information is usually provided regarding the virtual objects the trainee interacts with. However, information gathered through cutaneous (tactile feedback) and muscle mechanoreceptors (kinesthetic feedback) regarding, e.g., object shape, is crucial to successfully interact with those objects. To provide this essential information, previous haptic interfaces have targeted to render either tactile or kinesthetic feedback while the effectiveness of multimodal tactile and kinesthetic feedback on the perception of the characteristics of virtual objects still remains largely unexplored. Here, we present the results from an experiment we conducted with sixteen participants to evaluate the effectiveness of multimodal tactile and kinesthetic feedback on shape perception. Using a within-subject design, participants were asked to reproduce virtual shapes after exploring them without visual feedback and with either congruent tactile and kinesthetic feedback or with only kinesthetic feedback. Tactile feedback was provided with a cable-driven platform mounted on the fingertip, while kinesthetic feedback was provided using a haptic glove. To measure the participants' ability to perceive and reproduce the rendered shapes, we measured the time participants spent exploring and reproducing the shapes and the error between the rendered and reproduced shapes after exploration. Furthermore, we assessed the participants' workload and motivation using well-established questionnaires. We found that concurrent tactile and kinesthetic feedback during shape exploration resulted in lower reproduction errors and longer reproduction times. The longer reproduction times for the combined condition may indicate that participants could learn the shapes better and, thus, were more careful when reproducing them. We did not find differences between conditions in the time spent exploring the shapes or the participants' workload and motivation. The lack of differences in workload between conditions could be attributed to the reported minimal-to-intermediate workload levels, suggesting that there was little room to further reduce the workload. Our work highlights the potential advantages of multimodal congruent tactile and kinesthetic feedback when interacting with tangible virtual objects with applications in virtual simulators for hands-on training applications. [ABSTRACT FROM AUTHOR]

In the realm of virtual and augmented reality (VR/AR) and teleoperation applications, haptic feedback plays a role in enhancing task performance. One of the main goals of this study is to simplify haptic device hardware while improving its capacity to provide various stimuli at different intensities. In response to these challenges, this research introduces the Pneumatic Unit Cell (PUC), a soft pneumatically driven device—a hollow silicone cylinder with the ability to provide both static-pressure and vibrotactile feedback. Furthermore, the Pneumatic Unit Cell's design simplicity has the potential for scalability, modularity, and the flexibility to mount the device on any part of the human body. The focus of the current paper is to study PUCs as actuators and lay the foundation for future perceptual studies. The characterization studies encompass the fabrication and verification of the fabrication accuracy through dimensional measurements, characterizing PUCs under static-pressure conditions (measuring the free deflection and blocking force) and frequency conditions (measuring the free deflection). In the static-pressure conditions, we applied pressures ranging from 0 to 40 kPa to measure the free deflection and from 0 to 30 kPa to measure the blocking force. In the frequency conditions, we applied pressures of 10, 20, and 30 kPa with inflation/deflation rates varying between 0.5 Hz and 100 Hz. The measurements of free deflection under static-pressure conditions revealed that 0.9 mm and 1.2 mm PUCs exhibit a linear increase in free deflection with an increase in inflation pressure. The results of free-deflection measurements under the frequency conditions indicate a direct relationship between the free-deflection magnitude and applied pressure. The results also demonstrate an inverse relationship to the frequency of inflation/deflation. The characterization results demonstrate a broad range of free deflection observed under both static-pressure and frequency conditions, encouraging the potential application of Pneumatic Unit Cell actuators as haptic devices. [ABSTRACT FROM AUTHOR]

In current virtual reality settings for motor skill training, only visual information is usually provided regarding the virtual objects the trainee interacts with. However, information gathered through cutaneous (tactile feedback) and muscle mechanoreceptors (kinesthetic feedback) regarding, e.g., object shape, is crucial to successfully interact with those objects. To provide this essential information, previous haptic interfaces have targeted to render either tactile or kinesthetic feedback while the effectiveness of multimodal tactile and kinesthetic feedback on the perception of the characteristics of virtual objects still remains largely unexplored. Here, we present the results from an experiment we conducted with sixteen participants to evaluate the effectiveness of multimodal tactile and kinesthetic feedback on shape perception. Using a within-subject design, participants were asked to reproduce virtual shapes after exploring them without visual feedback and with either congruent tactile and kinesthetic feedback or with only kinesthetic feedback. Tactile feedback was provided with a cable-driven platform mounted on the fingertip, while kinesthetic feedback was provided using a haptic glove. To measure the participants’ ability to perceive and reproduce the rendered shapes, we measured the time participants spent exploring and reproducing the shapes and the error between the rendered and reproduced shapes after exploration. Furthermore, we assessed the participants’ workload and motivation using well-established questionnaires. We found that concurrent tactile and kinesthetic feedback during shape exploration resulted in lower reproduction errors and longer reproduction times. The longer reproduction times for the combined condition may indicate that participants could learn the shapes better and, thus, were more careful when reproducing them. We did not find differences between conditions in the time spent exploring the shapes or the participants’ workload and motivation. The lack of differences in workload between conditions could be attributed to the reported minimal-to-intermediate workload levels, suggesting that there was little room to further reduce the workload. Our work highlights the potential advantages of multimodal congruent tactile and kinesthetic feedback when interacting with tangible virtual objects with applications in virtual simulators for hands-on training applications.

Enhanced piezoelectric coefficient (d33) and mechanical quality factor (Qm) are prerequisite for high performance of resonant piezoelectric applications (e.g., ultrasound haptic displays). We present high performance piezoelectric actuators with a resonant frequency above 60 kHz beyond audible ranges for animals. The ultrasonic actuators provide sufficient tactile feedback with a high vibration displacement, which is superior to that of many state‐of‐the‐art commercial actuators without any visible damages in plastic organic light‐emitting diode (POLED) displays. Furthermore, the actuators can be assembled into an ultrasound loudspeaker, which could facilitate the directional private sound for high‐end automotive applications. [ABSTRACT FROM AUTHOR]

Research has shown that incorporating haptics into virtual environments can increase sensory fidelity and provide powerful and immersive experiences. However, current studies on haptics in virtual interactions primarily focus on one-on-one scenarios, while kinesthetic haptic interactions in large virtual gatherings are underexplored. This study aims to investigate the impact of kinesthetic haptics on eliciting emotional responses within crowded virtual reality (VR) scenarios. Specifically, we examine the influence of type or quality of the haptic feedback on the perception of positive and negative emotions. We designed and developed different combinations of tactile and torque feedback devices and evaluated their effects on emotional responses. To achieve this, we explored different combinations of haptic feedback devices, including “No Haptic,” “Tactile Stimulus” delivering tactile cues, and “Haptic Stimulus” delivering tactile and torque cues, in combination with two immersive 360- degree video crowd scenarios, namely, “Casual Crowd” and “Aggressive Crowd.” The results suggest that varying the type or quality of haptic feedback can evoke different emotional responses in crowded VR scenarios. Participants reported increased levels of nervousness with Haptic Stimulus in both virtual scenarios, while both Tactile Stimulus and Haptic Stimulus were negatively associated with pleasantness and comfort during the interaction. Additionally, we observed that participants’ sense of touch being real was enhanced in Haptic Stimulus compared to Tactile Stimulus. The “Haptic Stimulus” condition had the most positive influence on participants’ sense of identification with the crowd. [ABSTRACT FROM AUTHOR]

Research has shown that incorporating haptics into virtual environments can increase sensory fidelity and provide powerful and immersive experiences. However, current studies on haptics in virtual interactions primarily focus on one-on-one scenarios, while kinesthetic haptic interactions in large virtual gatherings are underexplored. This study aims to investigate the impact of kinesthetic haptics on eliciting emotional responses within crowded virtual reality (VR) scenarios. Specifically, we examine the influence of type or quality of the haptic feedback on the perception of positive and negative emotions. We designed and developed different combinations of tactile and torque feedback devices and evaluated their effects on emotional responses. To achieve this, we explored different combinations of haptic feedback devices, including “No Haptic,” “Tactile Stimulus” delivering tactile cues, and “Haptic Stimulus” delivering tactile and torque cues, in combination with two immersive 360-degree video crowd scenarios, namely, “Casual Crowd” and “Aggressive Crowd.” The results suggest that varying the type or quality of haptic feedback can evoke different emotional responses in crowded VR scenarios. Participants reported increased levels of nervousness with Haptic Stimulus in both virtual scenarios, while both Tactile Stimulus and Haptic Stimulus were negatively associated with pleasantness and comfort during the interaction. Additionally, we observed that participants’ sense of touch being real was enhanced in Haptic Stimulus compared to Tactile Stimulus. The “Haptic Stimulus” condition had the most positive influence on participants’ sense of identification with the crowd.

Social touch is essential to human development and communication. Mediated social touch is suggested as a solution for circumstances where distance prevents skin-to-skin contact. However, past research aimed at demonstrating efficacy of mediated touch in reducing stress and promoting helping have produced mixed findings. These inconsistent findings could possibly be due to insufficient control of contextual factors combined with unnatural interaction scenarios. For example, touch occurs less frequently among strangers and is often accompanied with nonverbal visual cues. We investigated how visual presentation of touch, and interpersonal relationship to the sender influence perception, affective experiences, and autonomic responses the touch evoke. Fifty couples of mixed gender were recruited. A mediated touch was repeatedly applied by either the male partner or male confederate to female participants. The latter witnessed through a webcam as the sender caressed a rubber hand or touchpad to send the touch. Following our hypotheses, touch sent by one's partner was perceived softer and more comforting than stranger touch. The partner's touch also resulted in weaker skin conductance responses, particularly when sent by touching a touchpad. In sum, how a mediated touch is experienced depends both on who is touching, and on how the touch is visually represented. [ABSTRACT FROM AUTHOR]

Wearable haptic displays can provide haptic information while allowing for free body movement. Among these haptic displays, pneumatic haptic displays have the advantages of flexibility and lightweight; however, they require bulky air tubes and a heavy air compressor. To solve this problem, we propose a wearable haptic display that uses a liquid-to-gas phase change actuator and a Peltier device as a way to reduce the size of the entire system. A low-boiling-point liquid is encapsulated in the flexible bladder of the actuator, and the vaporization of the liquid, which induces the inflation of the actuator, is controlled by the external Peltier device. In this study, we implemented a pressure sensor to monitor pressure inside the liquid-to-gas phase change actuator. The pressure measurement will contribute to controlling the generated normal force. First, we characterized the pressure response concerning the design of the liquid-to-gas phase change actuator. Next, we evaluated the output normal force of the haptic display and confirmed that the maximum output force reached a few newtons, which is a similar level to the off-the-shelf wearable haptic display devices. Finally, a sensory evaluation revealed that the experimental participants perceived the haptic stimulus to their fingertips provided by the proposed haptic display in a few seconds. According to the obtained results, the proposed haptic display can be applied to applications such as human interfaces to provide force, allowing for a response time of a few seconds.

The fractional differential algorithm has a good effect on extracting image textures, but it is usually necessary to select an appropriate fractional differential order for textures of different scales, so we propose a novel approach for haptic texture rendering of two-dimensional (2D) images by using an adaptive fractional differential method. According to the fractional differential operator defined by the Grünvald–Letnikov derivative (G–L) and combined with the characteristics of human vision, we propose an adaptive fractional differential method based on the composite sub-band gradient vector of the sub-image obtained by wavelet decomposition of the image texture. We apply these extraction results to the haptic display system to reconstruct the three-dimensional (3D) texture force filed to render the texture surface of two-dimensional (2D) images. Based on this approach, we carry out the quantitative analysis of the haptic texture rendering of 2D images by using the multi-scale structural similarity (MS-SSIM) and image information entropy. Experimental results show that this method can extract the texture features well and achieve the best texture force file for 2D images. [ABSTRACT FROM AUTHOR]

Electrovibration haptic technology, which provides tactile feedback to users by swiping the surface with a finger via electroadhesion, shows promise as a haptic feedback platform for displays owing to its simple structure, ease of integration with existing displays, and simple driving mechanism. However, without electrical grounding on a user's body, the frequent requirement of a high driving voltage near 50 V limits the use of electrovibration haptic technology in practical display applications. This study introduces materials and fabrication strategies that considerably reduce the driving voltage. We used a transparent poly(vinylidene fluoride) (PVDF) thin film deposited on transparent conductive polymers through a simple spin-coating process, thereby enabling easy integration with existing display technologies. The high dielectric constant characteristics of PVDF enabled the production of tactile cues at low voltages (approximately 15 V), which are within the safety limits of common electronics. We verified the feasibility of our electrovibration haptic feedback system on the basis of the absolute threshold voltage through two-alternative forced choice psychological tests. The results revealed that the PVDF dielectric layer exhibited a relatively lower absolute threshold than commonly used polymer films, which possess a relatively lower dielectric constant. To validate the tactile attributes, a Likert five-point scale survey was conducted, considering flat, concave, and convex curvatures. The results indicated that our haptic device can render diverse surface textures, such as "hairy" and "groovy", on the fingertips through the control of applied pulse width modulated voltage signals.

The haptic sensation of low-frequency vibration plays a vital role in the music listening experience, but it can be enjoyed only in certain facilities and environments. Many haptic devices have been proposed to convey music audio-induced vibration for various situations. Such devices require powerful, low-frequency vibration output and transmission over a wide area. Making such devices small and user-friendly is difficult, hindering their popularity. To promote haptic devices for music listening, this paper describes a method for developing a practical device using motors and a thread and evaluates this method's effectiveness. The proposed necklace-type device is small (about 55 $\mathbf \;{\times }$ 58 $\mathbf {\times }$ 15 mm), lightweight (58.5 g), and easy to wear, making it suitable for use during everyday travel. In addition, it can transmit low-frequency (20 Hz) vibrations, whose amplitude exceeds airborne vibration in a nightclub, to a wide area across the chest and neck, with a total power consumption of approximately 2 W. Our proposed method will contribute to the development of practical and high-performance haptic devices for music listening. [ABSTRACT FROM AUTHOR]

Data-driven texture modeling and rendering has pushed the limit of realism in haptics. However, the lack of haptic texture databases, difficulties of model interpolation and expansion, and the complexity of real textures prevent data-driven methods from capturing a large variety of textures and from customizing models to suit specific output hardware or user needs. This work proposes an interactive texture generation and search framework driven by user input. We design a GAN-based texture model generator, which can create a wide range of texture models using Auto-Regressive processes. Our interactive texture search method, which we call “preference-driven,” follows an evolutionary strategy given guidance from user's preferred feedback within a set of generated texture models. We implemented this framework on a 3D haptic device and conducted a two-phase user study to evaluate the efficiency and accuracy of our method for previously unmodeled textures. The results showed that by comparing the feel of real and generated virtual textures, users can follow an evolutionary process to efficiently find a virtual texture model that matched or exceeded the realism of a data-driven model. Furthermore, for 4 out of 5 real textures, $\geq$ 80% of the preference-driven models from participants were rated comparable to the data-driven models. [ABSTRACT FROM AUTHOR]

This paper presents an electroactive and soft vibrotactile actuator based on a dielectric elastomer. The vibrotactile actuator is composed of an upper layer, an adhesive tape layer, a dielectric layer with bumps, and a lower layer. When a voltage is applied to the actuator, an electrostatic force created between the upper and lower layers pulls the upper layer down, compressing the dielectric layer. As soon as the applied voltage is released, the upper layer is quickly restored to its initial state by the elastic force of the compressed dielectric elastomer. Because two forces contribute to the actuation at the same time, the created vibration is sufficiently strong to stimulate human mechanoreceptors. When the applied voltage is removed, the upper layer and dielectric elastomer return to their initial shapes. We conducted experiments to determine the best weight ratio of polydimethylsiloxane (PDMS) and Ecoflex, and to quantitatively investigate the haptic performance of the proposed vibrotactile actuator. The experiments clearly show that the plasticized vibrotactile actuator can create a variety of haptic sensations over a wide frequency range. [ABSTRACT FROM AUTHOR]

The fractional differential algorithm has a good effect on extracting image textures, but it is usually necessary to select an appropriate fractional differential order for textures of different scales, so we propose a novel approach for haptic texture rendering of two-dimensional (2D) images by using an adaptive fractional differential method. According to the fractional differential operator defined by the Grünvald–Letnikov derivative (G–L) and combined with the characteristics of human vision, we propose an adaptive fractional differential method based on the composite sub-band gradient vector of the sub-image obtained by wavelet decomposition of the image texture. We apply these extraction results to the haptic display system to reconstruct the three-dimensional (3D) texture force filed to render the texture surface of two-dimensional (2D) images. Based on this approach, we carry out the quantitative analysis of the haptic texture rendering of 2D images by using the multi-scale structural similarity (MS-SSIM) and image information entropy. Experimental results show that this method can extract the texture features well and achieve the best texture force file for 2D images.

In order to enhance the sense of reality haptic display based on image, it is widely expected to express various characteristics of the objects in the image using different kinds of haptic feedback. To this end, a multi-mode haptic display method of image was proposed in this paper, including the multi-feature extraction of image and the image expression with various types of haptic rendering. First, the device structure integrating force and vibrotactile feedbacks was designed for multi-mode haptic display. Meanwhile, the three-dimensional geometric shape, detail texture and outline of the object in the image were extracted by various image processing algorithms. Then, a rendering method for the object in the image was proposed based on the psychophysical experiments on the piezoelectric ceramic actuator. The 3D geometric shape, detail texture and outline of the object were rendered by force and vibration tactile feedbacks, respectively. Finally, these three features of the image were haptic expressed simultaneously by the integrated device. Haptic perception experiment results show that the multi-mode haptic display method can effectively improve the authenticity of haptic perception. [ABSTRACT FROM AUTHOR]

Hand reaching is a complex task that requires the integration of multiple sensory information from muscle, joints and the skin, and an internal model of the motor command. Recent studies in neuroscience highlighted the important role of touch for the control of hand movement while reaching for a target. In this article, present a novel device, the HaptiTrack device, to physically decouple tactile slip motion and hand movements. The new device generates precisely controlled 2D motion of a contact plate, measures contact forces, and provides hand and finger tracking through an external tracking system. By means of a control algorithm described in this manuscript, the velocity of tactile slip can be changed independently from the velocity of the hand sliding on the device's surface. Due to these multiple features, the device can be a powerful tool for the evaluation of tactile sense during hand reaching movements in healthy and pathological conditions. [ABSTRACT FROM AUTHOR]

The goal of haptic feedback in robotic teleoperation is to enable users to accurately feel the interaction force measured at the slave side and precisely understand what is happening in the slave environment. The accuracy of the feedback force describing the error between the actual feedback force felt by a user at the master side and the measured interaction force at the slave side is the key performance indicator for haptic display in robotic teleoperation. In this paper, we evaluate the haptic feedback accuracy in robotic teleoperation via experimental method. A special interface iHandle and two haptic devices, iGrasp-T and iGrasp-R, designed for robotic teleoperation are developed for experimental evaluation. The device iHandle integrates a high-performance force sensor and a micro attitude and heading reference system which can be used to identify human upper limb motor abilities, such as posture maintenance and force application. When a user is asked to grasp the iHandle and maintain a fixed position and posture, the fluctuation value of hand posture is measured to be between 2 and 8 degrees. Based on the experimental results, human hand tremble as input noise sensed by the haptic device is found to be a major reason that results in the noise of output force from haptic device if the spring-damping model is used to render feedback force. Therefore, haptic rendering algorithms should be independent of hand motion information to avoid input noise from human hand to the haptic control loop in teleoperation. Moreover, the iHandle can be fixed at the end effector of haptic devices; iGrasp-T or iGrasp-R, to measure the output force/torque from iGrasp-T or iGrasp-Rand to the user. Experimental results show that the accuracy of the output force from haptic device iGrasp-T is approximately 0.92 N, and using the force sensor in the iHandle can compensate for the output force inaccuracy of device iGrasp-T to 0.1 N. Using a force sensor as the feedback link to form a closed-loop feedback force control system is an effective way to improve the accuracy of feedback force and guarantee high-fidelity of feedback forces at the master side in robotic teleoperation.

The effectiveness of haptic feedback devices highly depends on the perception of tactile stimuli, which differs across body parts and can be affected by movement. In this study, a novel wearable sensory feedback apparatus made of a pair of pressure-sensitive insoles and a belt equipped with vibrotactile units is presented; the device provides time-discrete vibrations around the waist, synchronized with biomechanically-relevant gait events during walking. Experiments with fifteen healthy volunteers were carried out to investigate users’ tactile perception on the waist. Stimuli of different intensities were provided at twelve locations, each time synchronously with one pre-defined gait event (i.e. heel strike, flat foot or toe off), following a pseudo-random stimulation sequence. Reaction time, detection rate and localization accuracy were analyzed as functions of the stimulation level and site and the effect of gait events on perception was investigated. Results revealed that above-threshold stimuli (i.e. vibrations characterized by acceleration amplitudes of 1.92g and 2.13g and frequencies of 100 Hz and 150 Hz, respectively) can be effectively perceived in all the sites and successfully localized when the intertactor spacing is set to 10 cm. Moreover, it was found that perception of time-discrete vibrations was not affected by phase-related gating mechanisms, suggesting that the waist could be considered as a preferred body region for delivering haptic feedback during walking. [ABSTRACT FROM AUTHOR]

This study proposes a methodology to deliver contact information on construction robots to the remote operator by transmitting measured collision vibrations, which are often beyond the human-perceivable range. We focus on the human capacity to discriminate the envelope of high-frequency vibrations as an essential cue to perceive contact materials and collision conditions. The proposed method preserves the envelope shapes with amplitude-modulated waves with a single carrier frequency in the human sensitive range. In the preliminary experiments, a miniature shovel digging experiment confirmed that the proposed method improves the discriminability of the contact materials and sliding velocities. A psychophysical experiment also showed that the participants could discriminate the envelope differences irrespective of the carrier frequency. The proposed method was applied to the tactile transmission system for a construction robot developed in the ImPACT program. A vibration sensor was attached on the robot arm, and the vibrotactile feedback was applied to the operator's wrist. Performance evaluations under a delicate teleoperated task (insertion of a bar into bricks) showed that the peak force was reduced by the proposed method significantly for two out of the three participants. The results show that our proposal could improve the maneuverability of teleoperation. [ABSTRACT FROM AUTHOR]

We report a new vibrotactile modulation method of midair ultrasound focus, namely, lateral modulation (LM), in which the focus quickly moves along a small cyclic trajectory and provides stronger and clearer vibrotactile stimuli than those by the conventional amplitude modulation (AM) method. Midair ultrasound haptics has an essential technical advantage of offering remote, non-contact, and pinpoint tactile stimuli on device-free bare skin. On the other hand, lack of clarity in the presented vibrotactile sensation has often been pointed out, and until now, an AM focus has been valid only on glabrous skin. Our main scientific contribution of the article is to verify the LM method, with the following experimental findings newly obtained. We confirmed that with the same maximum output amplitude of the ultrasound phased arrays, LM stimuli with circular focal trajectories were sensed stronger than AM stimuli by glabrous skin and hairy skin in a modulation frequency of 10-200 Hz. We also found that the detection threshold in glabrous skin mainly depended on the focal speed, whereas the tendency in hairy skin was different from that. With these results, we discuss a basis of perceptional mechanism that responds to LM stimuli, along with practical aspects of potential applications. [ABSTRACT FROM AUTHOR]

Notable advancements have been achieved in providing amputees with sensation through invasive and non-invasive haptic feedback systems such as mechano-, vibro-, electro-tactile and hybrid systems. Purely mechanical-driven feedback approaches, however, have been little explored. In this paper, we now created a haptic feedback system that does not require any external power source (such as batteries) or other electronic components (see). The system is low-cost, lightweight, adaptable and robust against external impact (such as water). Hence, it will be sustainable in many aspects. We have made use of latest multi-material 3D printing technology (Stratasys Objet500 Connex3) being able to fabricate a soft sensor and a mechano-tactile feedback actuator made of a rubber (TangoBlack Plus) and plastic (VeroClear) material. When forces are applied to the fingertip sensor, fluidic pressure inside the system acts on the membrane of the feedback actuator resulting in mechano-tactile sensation. Our $\varnothing 7\,\mathrm{mm}$ feedback actuator is able to transmit a force range between $0.2\,\mathrm{N}$ (the median touch threshold) and $2.1\,\mathrm{N}$ (the maximum force transmitted by the feedback actuator at a $3\,\mathrm{mm}$ indentation) corresponding to force range exerted to the fingertip sensor of $1.2-18.49\,\mathrm{N}$. [ABSTRACT FROM AUTHOR]

This paper presents an electroactive and soft vibrotactile actuator based on a dielectric elastomer. The vibrotactile actuator is composed of an upper layer, an adhesive tape layer, a dielectric layer with bumps, and a lower layer. When a voltage is applied to the actuator, an electrostatic force created between the upper and lower layers pulls the upper layer down, compressing the dielectric layer. As soon as the applied voltage is released, the upper layer is quickly restored to its initial state by the elastic force of the compressed dielectric elastomer. Because two forces contribute to the actuation at the same time, the created vibration is sufficiently strong to stimulate human mechanoreceptors. When the applied voltage is removed, the upper layer and dielectric elastomer return to their initial shapes. We conducted experiments to determine the best weight ratio of polydimethylsiloxane (PDMS) and Ecoflex, and to quantitatively investigate the haptic performance of the proposed vibrotactile actuator. The experiments clearly show that the plasticized vibrotactile actuator can create a variety of haptic sensations over a wide frequency range.