Search

Boron/potassium nitrate (B/KNO3) is a type of critical energetic composite material (ECM). However, the inert oxide layer on the B surface of B/KNO3 hinders the contact between pure fuel and oxidant, thus limiting energy release This limitation could be eliminated by adding highly reactive Al powder. To discern the effects of Al powder size on the reaction process and reactivity of B/KNO3, this study prepared Al/B/KNO3/polyvinylidene fluoride (PVDF) energetic sticks using the direct ink writing (DIW) technology. This study characterized the macroscopic morphology and structure of the energetic sticks using a laser scanning microscope and a scanning electron microscope, examined the reaction process of the composites using a differential scanning calorimeter and a thermogravimetric analyzer, and observed the flame propagation behavior of energetic sticks and energetic architectures using a high-speed camera. Furthermore, it tested the pressure output characteristics of the energetic composites using a closed volume tank. The results show that adding Al powder can improve the combustion efficiency of B/Al composite fuels and reduce the agglomeration of the combustion products. The Al powder with various particle sizes affects various reaction stages of the composite. The combustion and pressure output tests suggest that adding Al powder with a particle size of 1 μm yielded high reactivity and that flame jump propagation appeared in energetic architectures when the channel spacing was below 10 mm. These findings provide a guide for modifying the B/KNO3 energetic composites and regulating the reactivity of energetic sticks.

In order to break through the top-down combustion mode brought by the traditional pillars, it is explored to explore the exploration of delay composition array construction in two-dimensional dimensions. In this study, B-CuO, B-Bi2O3, B-Fe2O3 sticks and combustion networks with good forming properties were prepared with the help of a micro-pen direct ink writing device by dispersing the above materials in DMF with boron and metal oxides as the main body of the charge and F2602 as the binder. The sticks were thermally ignited using a nichrome wire, and the flame propagation behaviors of the sticks with different formulations, spacings and heights were tracked with a high-speed camera, and a series of combustion networks were designed on the premise of not leaping into flames. Results show that the B-CuO stick has the fastest ignition speed level (19.71-29.02 mm ⋅ s-1) at equivalence ratios of 1.0-4.0, followed by B-Bi2O3 (5.99-16.01 mm ⋅ s-1) and B-Fe2O3 is the slowest (1.91-4.94 mm ⋅ s-1). The sticks burned best at an equivalence ratio of 1.0-1.5. A variety of combustion networks were constructed on 50 x 50 mm glass slides by selecting B-CuO, B-Bi2O3, and B-Fe2O3 at the equivalence ratios of 1.0, 1.5, and 1.5, respectively, among which B-CuO had the shortest combustion time (5.17 s), the shortest total combustion network length (252 mm), and 400 mm network could be realized for B-Bi2O3. Construction and 19.85 s, and B-Fe2O3 can realize 608 mm network length and 130.7 s combustion time. Through these studies, the two-dimensional combustion network construction of boron-metal oxides was realized, which provides a new idea for the delay action in small size. [ABSTRACT FROM AUTHOR]

Boron/potassium nitrate (B/KNO3) is a type of critical energetic composite material (ECM). However, the inert oxide layer on the B surface of B/KNO3 hinders the contact between pure fuel and oxidant, thus limiting energy release This limitation could be eliminated by adding highly reactive Al powder. To discern the effects of Al powder size on the reaction process and reactivity of B/KNO3, this study prepared Al/B/KNO3/polyvinylidene fluoride (PVDF) energetic sticks using the direct ink writing (DIW) technology. This study characterized the macroscopic morphology and structure of the energetic sticks using a laser scanning microscope and a scanning electron microscope, examined the reaction process of the composites using a differential scanning calorimeter and a thermogravimetric analyzer, and observed the flame propagation behavior of energetic sticks and energetic architectures using a high-speed camera. Furthermore, it tested the pressure output characteristics of the energetic composites using a closed volume tank. The results show that adding Al powder can improve the combustion efficiency of B/Al composite fuels and reduce the agglomeration of the combustion products. The Al powder with various particle sizes affects various reaction stages of the composite. The combustion and pressure output tests suggest that adding Al powder with a particle size of 1 µm yielded high reactivity and that flame jump propagation appeared in energetic architectures when the channel spacing was below 10 mm. These findings provide a guide for modifying the B/KNO3 energetic composites and regulating the reactivity of energetic sticks. [ABSTRACT FROM AUTHOR]