Search

In order to reduce the risk of early freezing damage to cement-based materials in winter construction, lime powder was used to improve the properties of the Portland cement–sulphoaluminate cement (PC–CSA) composite system at low temperatures. In this study, the effects of lime powder dosage on the properties of a PC–CSA blended system with two proportions (PC:CSA = 9:1 and 7:3) at −10 °C were investigated, and the mechanisms of improvement were revealed. The results showed that the compressive strength of the PC–CSA composite system was effectively improved, and the setting time was shortened by the addition of lime powder. Lime powder could effectively act as an early heating source in the PC–CSA composite system, as the maximum temperature of samples exposed to sub-zero temperatures was increased and the time before dropping to 0 °C was prolonged by the addition of lime powder. The extra CH generated by the hydration of lime powder provided an added hydration path for C4A3 S ¯ , which accelerated the formation of AFt at each stage. Frozen water as well as the early frost damage were effectively decreased by lime powder because of the faster consumption of free water at an early stage. The modification of the hydration products also contributed to the denseness of the microstructure. [ABSTRACT FROM AUTHOR]

Developing ruthenium‐based heterogeneous catalysts with an efficient and stable interface is essential for enhanced acidic oxygen evolution reaction (OER). Herein, we report a defect‐rich ultrathin boron nitride nanosheet support with relatively independent electron donor and acceptor sites, which serves as an electron reservoir and receiving station for RuO2, realizing the rapid supply and reception of electrons. Through precisely controlling the reaction interface, a low OER overpotential of only 180 mV (at 10 mA cm−2) and long‐term operational stability (350 h) are achieved, suggesting potential practical applications. In situ characterization and theoretical calculations have validated the existence of a localized electronic recycling between RuO2 and ultrathin BN nanosheets (BNNS). The electron‐rich Ru sites accelerate the adsorption of water molecules and the dissociation of intermediates, while the interconnection between the O‐terminal and B‐terminal edge establishes electronic back‐donation, effectively suppressing the over‐oxidation of lattice oxygen. This study provides a new perspective for constructing a stable and highly active catalytic interface. [ABSTRACT FROM AUTHOR]

Doping engineering is an effective strategy to improve the electrocatalytic activity of manganese oxides by enhancing their poor electrical conductivity and oxygen adsorption capacity. Herein, p‐block aluminum group metal ions (Al3+, Ga3+, and In3+) are introduced into cryptomelane‐type manganese oxide octahedral molecular sieves (OMS‐2), leading to p−d orbital hybridization between the p‐orbitals of the aluminum group metals and d‐orbitals of Mn, facilitating the oxygen reduction reaction. The aluminum group metal‐doped OMS‐2 exhibits excellent catalytic activity, rapid reaction kinetics, and favorable stability compared to commercial Pt/C. Among the three prepared catalysts, Ga‐doped OMS‐2 (Ga‐OMS‐2) has stronger oxygen reduction activity. Experimental and theoretical calculations show that the superiority of Ga‐OMS‐2 is attributed to p−d hybridization, which enriches the reaction sites and enhances the binding strength of the catalyst to the O2 reaction intermediates. As a proof of concept, Zinc−air batteries assembled with Ga‐OMS‐2 as a catalyst exhibit superior power density and cycle life to commercial Pt/C. This p−d hybridization strategy gives insight into the p‐block metal doping of catalysts prepared with other transition metals with excellent electrocatalytic activity and durability for energy storage and conversion. [ABSTRACT FROM AUTHOR]

Understanding the near-ground vertical and temporal photochemical O3 formation mechanism is important to mitigate the O3 pollution. Here, we measured the vertical profiles of O3 and its precursors at six different heights from 5-335 m using a newly built vertical observation system in Pearl River Delta (PRD) region, China. The net photochemical ozone production rate (P (O3)net) and O3 formation sensitivities at various heights were diagnosed using an observation-based model coupled with the Master Chemical Mechanism (MCM v3.3.1). Moreover, for the assessment of model performance and the causative factors behind O3 pollution episodes, the net photochemical ozone production rate (P (O3)net) was measured at 5 m ground level utilizing a custom-built detection system. In total three O3 pollution episodes and two non-episodes were captured. The identified O3 pollution episodes were found to be jointly influenced by both photochemical production and physical transport, with local photochemical reactions play a dominate role. The high index of agreement (IOA) calculated from comparing the modelled and measured P (O3)net values indicated the rationality to investigate the vertical and temporal variability of O3 formation mechanism using modelling results. However, the measured P (O3)net values were generally higher than the modelled P (O3)net values, particularly under high NOx conditions, which may indicate a potential underestimation of total RO2 by the model. Throughout the measurement period, the contribution of different reaction pathways to O3 production remained consistent across various heights, with HO2+NO as the major O3 production pathway, followed by RO2+NO. We saw P (O3)net decreased with the increase of the measurement height, primarily attributed to the decreased O3 precursors anthropogenic organic compounds (AVOC) and oxygenated volatile organic compounds (OVOC). O3 formation regimes were similar at different heights during both episodes and non-episodes, which was located either in volatile organic compounds (VOCs) sensitive regime or in transition regime and more sensitive to VOCs. Diurnally, photochemical O3 formation typically remained in the VOCs sensitive regime during the morning and noon time, but in the transitional regime and more sensitive to VOCs in the afternoon at around 16:00 LT. The vertical and temporal O3 formation are most sensitive to AVOC and OVOC, which suggests that targeting VOCs, especially AVOC and OVOC, for control measures is more practical and feasible at the observation site. The vertical temporal analysis of O3 formation mechanisms near the ground surface in this study provides critical foundational knowledge for formulating effective short-term emergency and long-term strategies to combat O3 pollution in the PRD region of China. [ABSTRACT FROM AUTHOR]

In recent years, due to serious environmental problems—increasing global natural gas demand, notable supply growth, LNG supply capacity expansion, natural gas consumption has increased significantly, and the natural gas industry has entered a booming stage. In this paper, China Resources Gas, a leading company in gas industry, is selected as the research object. We use DuPont analysis to analyze its financial statement from 2014 to 2017 and decompose the company’s return on net assets into the multiple of several financial ratios step by step. So the relationship between several major financial ratios can be used to comprehensively analyze the company’s profitability. Taking this as an example, the key factors affecting profitability of gas companies are concluded.

Current process-based research mainly uses box models to evaluate photochemical ozone production and destruction rates, and it is unclear to what extent the photochemical reaction mechanisms are elucidated. Here, we modified and improved a net photochemical ozone production rate (NPOPR, P (O 3) net) detection system based on the current dual-channel reaction chamber technique, which makes the instrument applicable to different ambient environments, and its various operating indicators were characterized, i.e., "airtightness", light transmittance, wall losses of the reaction and reference chambers, conversion rate of O 3 to NO 2 , air residence time, and performance of the reaction and reference chambers. The limits of detection of the NPOPR detection system were determined to be 0.07, 1.4, and 2.3 ppbv h -1 at sampling flow rates of 1.3, 3, and 5 L min -1 , respectively. We further applied the NPOPR detection system to field observations at an urban site in the Pearl River Delta (China). During the observation period, the maximum value of P (O 3) net was 34.1 ppbv h -1 , which was ∼ 0 ppbv h -1 at night within the system detection error and peaked at approximately noon local time. The daytime (from 06:00–18:00 LT) average value of P (O 3) net was 12.8 (± 5.5) ppbv h -1. We investigated the detailed photochemical O 3 formation mechanism in the reaction and reference chambers of the NPOPR detection system using a zero-dimensional box model. We found that the photochemical reactions in the reaction chamber were very close to those in ambient air, but there was not zero chemistry in the reference chamber because the reaction related to the production and destruction of RO 2 (= HO 2 + RO 2) continued in the reference chamber, which led to a small amount of P (O 3) net. Therefore, the P (O 3) net measured here can be regarded as the lower limit of the real P (O 3) net in the atmosphere; however, the measured P (O 3) net was still ∼ 7.5 to 9.3 ppbv h -1 higher than the modeled P (O 3) net value depending on different modeling methods, which may be due to the inaccurate estimation of HO 2 / RO 2 radicals in the modeling study. Short-lived intermediate measurements coupled with direct P (O 3) net measurements are needed in the future to better understand O 3 photochemistry. Our results show that the NPOPR detection system can achieve high temporal resolution and continuous field observations, which helps us to better understand photochemical O 3 formation and provides a key scientific basis for continuous improvement of air quality in China. [ABSTRACT FROM AUTHOR]