Search

Millimeter wave (mmWave) multiple-input multiple-output (MIMO) systems capable of integrated sensing and communication (ISAC) constitute a key technology for connected autonomous vehicles (CAVs). In this context, we propose a multi-beam object-localization (MBOL) model for enhancing the sensing beampattern (SBP) gain of adjacent objects in CAV scenarios. Given the ultra-narrow beams of mmWave MIMO systems, a single pencil beam is unsuitable for closely located objects, which tend to require multiple beams. Hence, we formulate the SBP gain maximization problem, considering also the constraints on the signal-to-interference and noise ratio (SINR) of the communication users (CUs), on the transmit power, and the constant modulus of the phase-shifters in the mmWave hybrid transceiver. To solve this non-convex problem, we propose a penalty-based triple alternating optimization algorithm to design the hybrid beamformer. Finally, simulation results are provided for demonstrating the efficacy of the proposed model.

Large optical reconfigurable intelligent surfaces (ORISs) are proposed for employment on building rooftops to facilitate free-space quantum key distribution (QKD) between high-altitude platforms (HAPs) and low-altitude platforms (LAPs). Due to practical constraints, the communication terminals can only be positioned beneath the LAPs, preventing direct upward links to HAPs. By deploying ORISs on rooftops to reflect the beam arriving from HAPs towards LAPs from below, reliable HAP-to-LAP links can be established. To accurately characterize the optical beam propagation, we develop an analytical channel model based on extended Huygens-Fresnel principles for representing both the atmospheric turbulence effects and the hovering fluctuations of LAPs. This model facilitates adaptive ORIS beam-width control through linear, quadratic, and focusing phase shifts, which are capable of effectively mitigating the detrimental effects of beam broadening and pointing errors (PE). Furthermore, we derive a closed-form expression for the information-theoretic bound of the QKD secret key rate (SKR) of the HAP-to-LAP links. Our findings demonstrate that quadratic phase shifts enhance the SKR at high HAP-ORIS zenith angles or mild PE conditions by narrowing the beam to optimal sizes. By contrast, linear phase shifts are advantageous at low HAP-ORIS zenith angles under moderate-to-high PE by diverging the beam to mitigate LAP fluctuations., Comment: 16 pages, 7 figures, 3 tables

We propose reflection pattern modulation-aided reconfigurable intelligent surface (RPM-RIS)-assisted cell-free massive multiple-input-multiple-output (CF-mMIMO) schemes for green uplink transmission. In our RPM-RIS-assisted CF-mMIMO system, extra information is conveyed by the indices of the active RIS blocks, exploiting the joint benefits of both RIS-assisted CF-mMIMO transmission and RPM. Since only part of the RIS blocks are active, our proposed architecture strikes a flexible energy \emph{vs.} spectral efficiency (SE) trade-off. We commence with introducing the system model by considering spatially correlated channels. Moreover, we conceive a channel estimation scheme subject to the linear minimum mean-square error (MMSE) constraint, yielding sufficient information for the subsequent signal processing steps. Then, upon exploiting a so-called large-scale fading decoding (LSFD) scheme, the uplink signal-to-interference-and-noise ratio (SINR) is derived based on the RIS ON/OFF statistics, where both maximum ratio (MR) and local minimum mean-square error (L-MMSE) combiners are considered. By invoking the MR combiner, the closed-form expression of the uplink SE is formulated based only on the channel statistics. Furthermore, we derive the total energy efficiency (EE) of our proposed RPM-RIS-assisted CF-mMIMO system. Additionally, we propose a chaotic sequence-based adaptive particle swarm optimization (CSA-PSO) algorithm to maximize the total EE by designing the RIS phase shifts. Finally, our simulation results demonstrate that the proposed RPM-RIS-assisted CF-mMIMO architecture strikes an attractive SE \emph{vs.} EE trade-off, while the CSA-PSO algorithm is capable of attaining a significant EE performance gain compared to conventional solutions., Comment: 16pages, 12 figures, accepted by IEEE TCOM

This paper investigates a two-user downlink system for integrated sensing and communication (ISAC) in which the two users deploy a fluid antenna system (FAS) and adopt the nonorthogonal multiple access (NOMA) strategy. Specifically, the integrated sensing and backscatter communication (ISABC) model is considered, where a dual-functional base station (BS) serves to communicate the two users and sense a tag's surrounding. In contrast to conventional ISAC, the backscattering tag reflects the signals transmitted by the BS to the NOMA users and enhances their communication performance. Furthermore, the BS extracts environmental information from the same backscatter signal in the sensing stage. Firstly, we derive closed-form expressions for both the cumulative distribution function (CDF) and probability density function (PDF) of the equivalent channel at the users utilizing the moment matching method and the Gaussian copula. Then in the communication stage, we obtain closed-form expressions for both the outage probability and for the corresponding asymptotic expressions in the high signal-to-noise ratio (SNR) regime. Moreover, using numerical integration techniques such as the Gauss-Laguerre quadrature (GLQ), we have series-form expressions for the user ergodic communication rates (ECRs). In addition, we get a closed-form expression for the ergodic sensing rate (ESR) using the Cramer-Rao lower bound (CRLB). Finally, the accuracy of our analytical results is validated numerically, and we confirm the superiority of employing FAS over traditional fixed-position antenna systems in both ISAC and ISABC.

A cell-free massive multiple-input multiple-output (CF-mMIMO) system is considered for enhancing the monitoring performance of wireless surveillance, where a large number of distributed multi-antenna aided legitimate monitoring nodes (MNs) proactively monitor multiple distributed untrusted communication links. We consider two types of MNs whose task is to either observe the untrusted transmitters or jam the untrusted receivers. We first analyze the performance of CF-mMIMO surveillance relying on both maximum ratio (MR) and partial zero-forcing (PZF) combining schemes and derive closed-form expressions for the monitoring success probability (MSP) of the MNs. We then propose a joint optimization technique that designs the MN mode assignment, power control, and MN-weighting coefficient control to enhance the MSP based on the long-term statistical channel state information knowledge. This challenging problem is effectively transformed into tractable forms and efficient algorithms are proposed for solving them. Numerical results show that our proposed CF-mMIMO surveillance system considerably improves the monitoring performance with respect to a full-duplex co-located massive MIMO proactive monitoring system. More particularly, when the untrusted pairs are distributed over a wide area and use the MR combining, the proposed solution provides nearly a thirty-fold improvement in the minimum MSP over the co-located massive MIMO baseline, and forty-fold improvement, when the PZF combining is employed., Comment: Accepted in IEEE Internet of Things Journal. arXiv admin note: text overlap with arXiv:2310.09769

In this work, a reconfigurable intelligent surface (RIS)-aided millimeter wave (mmWave) multiple-input multiple-output (MIMO) cognitive radio (CR) downlink operating in the underlay mode is investigated. The cognitive base station (CBS) communicates with multiple secondary users (SUs), each having multiple RF chains in the presence of a primary user (PU). We conceive a joint hybrid transmit precoder (TPC), receiver combiner (RC), and RIS reflection matrix (RM) design, which maximizes the sum spectral efficiency (SE) of the secondary system while maintaining the interference induced at the PU below a specified threshold. To this end, we formulate the sum-SE maximization problem considering the total transmit power (TP), the interference power (IP), and the non-convex unity modulus constraints of the RF TPC, RF RC, and RM. To solve this highly non-convex problem, we propose a two-stage hybrid transceiver design in conjunction with a novel block coordinate descent (BCD)-successive Riemannian conjugate gradient (SRCG) algorithm. We initially decompose the RF TPC, RC, and RM optimization problem into a series of sub-problems and subsequently design pairs of RF TPC and RC vectors, followed by successively optimizing the elements of the RM using the iterative BCD-SRCG algorithm. Furthermore, based on the effective baseband (BB) channel, the BB TPC and BB RC are designed using the proposed direct singular value decomposition (D-SVD) and projection based SVD (P-SVD) methods. Subsequently, the proportional water-filling solution is proposed for optimizing the power, which maximizes the weighted sum-SE of the system. Finally, simulation results are provided to compare our proposed schemes to several benchmarks and quantify the impact of other parameters on the sum-SE of the system.

Pareto optimal solutions are conceived for radar beamforming error (RBE) and sum rate maximization in short-packet (SP) millimeter-wave (mmWave) integrated sensing and communication (ISAC). Our ultimate goal is to realize ultra-reliable low-latency communication (uRLLC) and real-time sensing capabilities for 6G applications. The ISAC base station (BS) transmits short packets in the downlink (DL) to serve multiple communication users (CUs) and detect multiple radar targets (RTs). We investigate the performance trade-off between the sensing and communication capabilities by optimizing both the radio frequency (RF) and the baseband (BB) transmit precoder (TPC), together with the block lengths. The optimization problem considers the minimum rate requirements of the CUs, the maximum tolerable radar beamforming error (RBE) for the RTs, the unit modulus (UM) elements of the RF TPC, and the finite transmit power as the constraints for SP transmission. The resultant problem is highly non-convex due to the intractable rate expression of the SP regime coupled with the non-convex rate and UM constraints. To solve this problem, we propose an innovative two-layer bisection search (TLBS) algorithm, wherein the RF and BB TPCs are optimized in the inner layer, followed by the block length in the outer layer. Furthermore, a pair of novel methods, namely a bisection search-based majorizer and minimizer (BMM) as well as exact penalty-based manifold optimization (EPMO) are harnessed for optimizing the RF TPC in the inner layer. Subsequently, the BB TPC and the block length are derived via second-order cone programming (SOCP) and mixed integer programming methods, respectively. Finally, our exhaustive simulation results reveal the effect of system parameters for various settings on the RBE-rate region of the SP mmWave ISAC system and demonstrate a significantly enhanced performance compared to the benchmarks., Comment: 15 pages, 13 figures

Large-scale multiple-input and multiple-output (MIMO) systems are capable of achieving high date rate. However, given the high hardware cost and excessive power consumption of massive MIMO systems, as a remedy, intelligent metasurfaces have been designed for efficient holographic MIMO (HMIMO) systems. In this paper, we propose a HMIMO architecture based on stacked intelligent metasurfaces (SIM) for the uplink of cell-free systems, where the SIM is employed at the access points (APs) for improving the spectral- and energy-efficiency. Specifically, we conceive distributed beamforming for SIM-assisted cell-free networks, where both the SIM coefficients and the local receiver combiner vectors of each AP are optimized based on the local channel state information (CSI) for the local detection of each user equipment (UE) information. Afterward, the central processing unit (CPU) fuses the local detections gleaned from all APs to detect the aggregate multi-user signal. Specifically, to design the SIM coefficients and the combining vectors of the APs, a low-complexity layer-by-layer iterative optimization algorithm is proposed for maximizing the equivalent gain of the channel spanning from the UEs to the APs. At the CPU, the weight vector used for combining the local detections from all APs is designed based on the minimum mean square error (MMSE) criterion, where the hardware impairments (HWIs) are also taken into consideration based on their statistics. The simulation results show that the SIM-based HMIMO outperforms the conventional single-layer HMIMO in terms of the achievable rate. We demonstrate that both the HWI of the radio frequency (RF) chains at the APs and the UEs limit the achievable rate in the high signal-to-noise-ratio (SNR) region.

The integration of sensing and communication (ISAC) emerges as a cornerstone technology for the forth upcoming sixth generation era, seamlessly incorporating sensing functionality into wireless networks as a native capability. The main challenges in efficient ISAC are constituted by its limited sensing and communication coverage, as well as severe inter-cell interference. Network-level ISAC relying on multi-cell cooperation is capable of effectively expanding both the sensing and communication (S&C) coverage and of providing extra degrees of freedom (DoF) for realizing increased integration gains between S&C. In this work, we provide new considerations for ISAC networks, including new metrics, the optimization of the DoF, cooperation regimes, and highlight new S&C tradeoffs. Then, we discuss a suite of cooperative S&C architectures both at the task, as well as data, and signal levels. Furthermore, the interplay between S&C at the network level is investigated and promising research directions are outlined., Comment: 8 pages, 4 figures, 2 tables, submitted to IEEE for possible publication

In contrast to the conventional reconfigurable intelligent surfaces (RIS), intelligent omni-surfaces (IOS) are capable of full-space coverage of smart radio environments by simultaneously transmitting and reflecting the incident signals. In this paper, we investigate the ergodic spectral efficiency of IOS-aided systems for transmission over random channel links, while considering both realistic imperfect channel state information (CSI) and transceiver hardware impairments (HWIs). Firstly, we formulate the linear minimum mean square error estimator of the equivalent channel spanning from the user equipments (UEs) to the access point (AP), where the transceiver HWIs are also considered. Then, we apply a two-timescale protocol for designing the beamformer of the IOS-aided system. Specifically, for the active AP beamformer, the minimum mean square error combining method is employed, which relies on the estimated equivalent channels, on the statistical information of the channel estimation error, on the inter-user interference as well as on the HWIs at the AP and UEs. By contrast, the passive IOS beamformer is designed based on the statistical CSI for maximizing the upper bound of the ergodic spectral efficiency. The theoretical analysis and simulation results show that the transceiver HWIs have a significant effect on the ergodic spectral efficiency, especially in the high transmit power region. Furthermore, we show that the HWIs at the AP can be effectively compensated by deploying more AP antennas., Comment: IEEE Transactions on Communications, 2024

We propose a hybrid beamforming architecture for near-field reconfigurable holographic surfaces (RHS) harnessed in cell-free networks. Specifically, the holographic beamformer of each base station (BS) is designed for maximizing the channel gain based on the local channel state information (CSI). By contrast, the digital beamformer at the central processing unit is designed based on the minimum mean squared error criterion. Furthermore, the near-field spectral efficiency of the RHS in cell-free networks is derived theoretically by harnessing the popular stochastic geometry approach. We consider both the phase shift error (PSE) at the RHS elements and the hardware impairment (HWI) at the radio frequency (RF) chains of the transceivers. Furthermore, we theoretically derive the asymptotic capacity bound, when considering an infinite physical size for the RHS in the near-field channel model. The theoretical analysis and simulation results show that the PSE at the RHS elements and the HWI at the RF chains of transceivers limit the spectral efficiency in the high signal-to-noise ratio region. Moreover, we show that the PSE at the RHS elements and the HWI at the RF chains of BSs can be compensated by increasing the number of BSs. Finally, we also demonstrate that the ergodic spectral efficiency based on the near-field channel model is higher than that based on the far-field channel model assumption., Comment: 13 pages, 7 figures. IEEE Transactions on Wireless Communications, 2024

Reconfigurable holographic surfaces (RHSs) constitute a promising technique of supporting energy-efficient communications. In this paper, we formulate the energy efficiency maximization problem of the switch-controlled RHS-aided beamforming architecture by alternately optimizing the holographic beamformer at the RHS, the digital beamformer, the total transmit power and the power sharing ratio of each user. Specifically, to deal with this challenging non-convex optimization problem, we decouple it into three sub-problems. Firstly, the coefficients of RHS elements responsible for the holographic beamformer are optimized to maximize the sum of the eigen-channel gains of all users by our proposed low-complexity eigen-decomposition (ED) method. Then, the digital beamformer is designed by the singular value decomposition (SVD) method to support multi-user information transfer. Finally, the total transmit power and the power sharing ratio are alternately optimized, while considering the effect of transceiver hardware impairments (HWI). We theoretically derive the spectral efficiency and energy efficiency performance upper bound for the RHS-based beamforming architectures in the presence of HWIs. Our simulation results show that the switch-controlled RHS-aided beamforming architecture achieves higher energy efficiency than the conventional fully digital beamformer and the hybrid beamformer based on phase shift arrays (PSA). Moreover, considering the effect of HWI in the beamforming design can bring about further energy efficiency enhancements., Comment: IEEE Transactions on Communications, 2024

An intelligent omni-surface (IOS) assisted holographic multiple-input and multiple-output architecture is conceived for $360^\circ$ full-space coverage at a low energy consumption. The theoretical ergodic rate lower bound of our non-orthogonal multiple access (NOMA) scheme is derived based on the moment matching approximation method, while considering the signal distortion at transceivers imposed by hardware impairments (HWIs). Furthermore, the asymptotically ergodic rate lower bound is derived both for an infinite number of IOS elements and for continuous aperture surfaces. Both the theoretical analysis and the simulation results show that the achievable rate of the NOMA scheme is higher than that of its orthogonal multiple access counterpart. Furthermore, owing to the HWIs at the transceivers, the achievable rate saturates at high signal-to-noise ratio region, instead of reaching its theoretical maximum., Comment: 6 pages, 3 figures. IEEE Transactions on Vehicular Technology, 2024

Integrated sensing and communication (ISAC) networks are investigated with the objective of effectively balancing the sensing and communication (S&C) performance at the network level. Through the simultaneous utilization of multi-point (CoMP) coordinated joint transmission and distributed multiple-input multiple-output (MIMO) radar techniques, we propose an innovative networked ISAC scheme, where multiple transceivers are employed for collaboratively enhancing the S&C services. Then, the potent tool of stochastic geometry is exploited for characterizing the S&C performance, which allows us to illuminate the key cooperative dependencies in the ISAC network and optimize salient network-level parameters. Remarkably, the Cramer-Rao lower bound (CRLB) expression of the localization accuracy derived unveils a significant finding: Deploying N ISAC transceivers yields an enhanced average cooperative sensing performance across the entire network, in accordance with the ln^2N scaling law. Crucially, this scaling law is less pronounced in comparison to the performance enhancement of N^2 achieved when the transceivers are equidistant from the target, which is primarily due to the substantial path loss from the distant base stations (BSs) and leads to reduced contributions to sensing performance gain. Moreover, we derive a tight expression of the communication rate, and present a low-complexity algorithm to determine the optimal cooperative cluster size. Based on our expression derived for the S&C performance, we formulate the optimization problem of maximizing the network performance in terms of two joint S&C metrics. To this end, we jointly optimize the cooperative BS cluster sizes and the transmit power to strike a flexible tradeoff between the S&C performance., Comment: 13 pages, 10 figures, this work has been submitted to IEEE for possible publication. arXiv admin note: text overlap with arXiv:2403.20228

New near-capacity continuous-variable quantum key distribution (CV-QKD) reconciliation schemes are proposed, where both the authenticated classical channel (ClC) and the quantum channel (QuC) for QKD are protected by separate forward error correction (FEC) coding schemes. More explicitly, a new codeword-based - rather than syndrome-based - QKD reconciliation scheme is proposed, where Alice sends an FEC-protected codeword to Bob through a ClC, while Bob sends a separate FEC protected codeword to Alice through a QuC. Upon decoding the codeword received from the other side, the final key is obtained by applying a simple modulo-2 operation to the local codeword and the decoded remote codeword. As a result, first of all, the proposed codeword-based QKD reconciliation system ensures protection of both the QuC and of the ClC. Secondly, the proposed system has a similar complexity at both sides, where both Alice and Bob have an FEC encoder and an FEC decoder. Thirdly, the proposed system makes QKD reconciliation compatible with a wide range of FEC schemes, including polar codes, CCs and irregular convolutional codes (IRCCs), where a near-capacity performance can be achieved for both the QuC and for the ClC.Our simulation results demonstrate that thanks to the proposed regime, the performance improvements of the QuC and of the ClC benefit each other, hence leading to an improved secret key rate (SKR) that inches closer to both the Pirandola-Laurenza-Ottaviani-Banchi (PLOB) bound and to the maximum achieveable rate bound.

We propose a channel estimation scheme based on joint sparsity pattern learning (JSPL) for massive multi-input multi-output (MIMO) orthogonal time-frequency-space (OTFS) modulation aided systems. By exploiting the potential joint sparsity of the delay-Doppler-angle (DDA) domain channel, the channel estimation problem is transformed into a sparse recovery problem. To solve it, we first apply the spike and slab prior model to iteratively estimate the support set of the channel matrix, and a higher-accuracy parameter update rule relying on the identified support set is introduced into the iteration. Then the specific values of the channel elements corresponding to the support set are estimated by the orthogonal matching pursuit (OMP) method. Both our simulation results and analysis demonstrate that the proposed JSPL channel estimation scheme achieves an improved performance over the representative state-of-the-art baseline schemes, despite its reduced pilot overhead., Comment: 6 pages, 6 figures, accepted to appear on IEEE Transactions on Vehicular Technology, Mar. 2024

Both smart propagation engineering as well as integrated sensing and communication (ISAC) constitute promising candidates for next-generation (NG) mobile networks. We provide a synergistic view of these technologies, and explore their mutual benefits. First, moving beyond just intelligent surfaces, we provide a holistic view of the engineering aspects of smart propagation environments. By delving into the fundamental characteristics of intelligent surfaces, fluid antennas, and unmanned aerial vehicles, we reveal that more efficient control of the pathloss and fading can be achieved, thus facilitating intrinsic integration and mutual assistance between sensing and communication functionalities. In turn, with the exploitation of the sensing capabilities of ISAC to orchestrate the efficient configuration of radio environments, both the computational effort and signaling overheads can be reduced. We present indicative simulation results, which verify that cooperative smart propagation environment design significantly enhances the ISAC performance. Finally, some promising directions are outlined for combining ISAC with smart propagation engineering., Comment: 7 pages, 5 figures, submitted to IEEE journal for possible publication

Modern wireless communication systems are expected to provide improved latency and reliability. To meet these expectations, a short packet length is needed, which makes the first-order Shannon rate an inaccurate performance metric for such communication systems. A more accurate approximation of the achievable rates of finite-block-length (FBL) coding regimes is known as the normal approximation (NA). It is therefore of substantial interest to study the optimization of the FBL rate in multi-user multiple-input multiple-output (MIMO) systems, in which each user may transmit and/or receive multiple data streams. Hence, we formulate a general optimization problem for improving the spectral and energy efficiency of multi-user MIMO-aided ultra-reliable low-latency communication (URLLC) systems, which are assisted by reconfigurable intelligent surfaces (RISs). We show that a RIS is capable of substantially improving the performance of multi-user MIMO-aided URLLC systems. Moreover, the benefits of RIS increase as the packet length and/or the tolerable bit error rate are reduced. This reveals that RISs can be even more beneficial in URLLC systems for improving the FBL rates than in conventional systems approaching Shannon rates.

Extremely large-scale multiple-input multiple-output (XL-MIMO) systems are capable of improving spectral efficiency by employing far more antennas than conventional massive MIMO at the base station (BS). However, beam training in multiuser XL-MIMO systems is challenging. To tackle these issues, we conceive a three-phase graph neural network (GNN)-based beam training scheme for multiuser XL-MIMO systems. In the first phase, only far-field wide beams have to be tested for each user and the GNN is utilized to map the beamforming gain information of the far-field wide beams to the optimal near-field beam for each user. In addition, the proposed GNN-based scheme can exploit the position-correlation between adjacent users for further improvement of the accuracy of beam training. In the second phase, a beam allocation scheme based on the probability vectors produced at the outputs of GNNs is proposed to address the above beam-direction conflicts between users. In the third phase, the hybrid TBF is designed for further reducing the inter-user interference. Our simulation results show that the proposed scheme improves the beam training performance of the benchmarks. Moreover, the performance of the proposed beam training scheme approaches that of an exhaustive search, despite requiring only about 7% of the pilot overhead., Comment: submitted to IEEE

Bayesian learning aided massive antenna array based THz MIMO systems are designed for spatial-wideband and frequency-wideband scenarios, collectively termed as the dual-wideband channels. Essentially, numerous antenna modules of the THz system result in a significant delay in the transmission/ reception of signals in the time-domain across the antennas, which leads to spatial-selectivity. As a further phenomenon, the wide bandwidth of THz communication results in substantial variation of the effective angle of arrival/ departure (AoA/ AoD) with respect to the subcarrier frequency. This is termed as the beam squint effect, which renders the channel state information (CSI) estimation challenging in such systems. To address this problem, initially, a pilot-aided (PA) Bayesian learning (PA-BL) framework is derived for the estimation of the Terahertz (THz) MIMO channel that relies exclusively on the pilot beams transmitted. Since the framework designed can successfully operate in an ill-posed model, it can verifiably lead to reduced pilot transmissions in comparison to conventional methodologies. The above paradigm is subsequently extended to additionally incorporate data symbols to derive a Data-Aided (DA) BL approach that performs joint data detection and CSI estimation. We will demonstrate that it is capable of improving the dual-wideband channels estimate, despite further reducing the training overhead. The Bayesian Cramer-Rao bounds (BCRLBs) are also obtained for explicitly characterizing the lower bounds on the mean squared error (MSE) of the PA-BL and DA-BL frameworks. Our simulation results show the improved normalized MSE (NMSE) and bit-error rate (BER) performance of the proposed estimation schemes and confirm that they approach their respective BCRLB benchmarks.

Asynchronous distributed hybrid beamformers (ADBF) are conceived for minimizing the total transmit power subject to signal-to-interference-plus-noise ratio (SINR) constraints at the users. Our design requires only limited information exchange between the base stations (BSs) of the mmWave multi-cell coordinated (MCC) networks considered. To begin with, a semidefinite relaxation (SDR)-based fully-digital (FD) beamformer is designed for a centralized MCC system. Subsequently, a Bayesian learning (BL) technique is harnessed for decomposing the FD beamformer into its analog and baseband components and construct a hybrid transmit precoder (TPC). However, the centralized TPC design requires global channel state information (CSI), hence it results in a high signaling overhead. An alternating direction based method of multipliers (ADMM) technique is developed for a synchronous distributed beamformer (SDBF) design, which relies only on limited information exchange among the BSs, thus reducing the signaling overheads required by the centralized TPC design procedure. However, the SDBF design is challenging, since it requires the updates from the BSs to be strictly synchronized. As a remedy, an ADBF framework is developed that mitigates the inter-cell interference (ICI) and also control the asynchrony in the system. Furthermore, the above ADBF framework is also extended to the robust ADBF (R-ADBF) algorithm that incorporates the CSI uncertainty into the design procedure for minimizing the the worst-case transmit power. Our simulation results illustrate both the enhanced performance and the improved convergence properties of the ADMM-based ADBF and R-ADBF schemes.

Stacked intelligent metasurfaces (SIM) are capable of emulating reconfigurable physical neural networks by relying on electromagnetic (EM) waves as carriers. They can also perform various complex computational and signal processing tasks. A SIM is fabricated by densely integrating multiple metasurface layers, each consisting of a large number of small meta-atoms that can control the EM waves passing through it. In this paper, we harness a SIM for two-dimensional (2D) direction-of-arrival (DOA) estimation. In contrast to the conventional designs, an advanced SIM in front of the receiver array automatically carries out the 2D discrete Fourier transform (DFT) as the incident waves propagate through it. As a result, the receiver array directly observes the angular spectrum of the incoming signal. In this context, the DOA estimates can be readily obtained by using probes to detect the energy distribution on the receiver array. This avoids the need for power-thirsty radio frequency (RF) chains. To enable SIM to perform the 2D DFT, we formulate the optimization problem of minimizing the fitting error between the SIM's EM response and the 2D DFT matrix. Furthermore, a gradient descent algorithm is customized for iteratively updating the phase shift of each meta-atom in SIM. To further improve the DOA estimation accuracy, we configure the phase shift pattern in the zeroth layer of the SIM to generate a set of 2D DFT matrices associated with orthogonal spatial frequency bins. Additionally, we analytically evaluate the performance of the proposed SIM-based DOA estimator by deriving a tight upper bound for the mean square error (MSE). Our numerical simulations verify the capability of a well-trained SIM to perform DOA estimation and corroborate our theoretical analysis. It is demonstrated that a SIM having an optical computational speed achieves an MSE of $10^{-4}$ for DOA estimation., Comment: 37 pages, 12 figures, and 2 tables. arXiv admin note: text overlap with arXiv:2310.09861

Quantum annealing (QA) is proposed for vector perturbation precoding (VPP) in multiple input multiple output (MIMO) communications systems. The mathematical framework of VPP is presented, outlining the problem formulation and the benefits of lattice reduction algorithms. Lattice reduction aided quantum vector perturbation (LRAQVP) is designed by harnessing physical quantum hardware, and the optimization of hardware parameters is discussed. We observe a 5dB gain over lattice reduction zero forcing precoding (LRZFP), which behaves similarly to a quantum annealing algorithm operating without a lattice reduction stage. The proposed algorithm is also shown to approach the performance of a sphere encoder, which exhibits an exponentially escalating complexity., Comment: accepted by IEEE Wireless Communications Letters

An orthogonal time sequency multiplexing (OTSM) scheme using practical signaling functions is proposed under strong phase noise (PHN) scenarios. By utilizing the transform relationships between the delay-sequency (DS), time-frequency (TF) and time-domains, we first conceive the DS-domain input-output relationship of our OTSM system, where the conventional zero-padding is discarded to increase the spectral efficiency. Then, the unconditional pairwise error probability is derived, followed by deriving the bit error ratio (BER) upper bound in closed-form. Moreover, we compare the BER performance of our OTSM system based on several practical signaling functions. Our simulation results demonstrate that the upper bound derived accurately predicts the BER performance in the case of moderate to high signal-to-noise ratios (SNRs), while harnessing practical window functions is capable of attaining an attractive out-of-band emission (OOBE) vs. BER trade-off., Comment: Accepted by WCNC 2024

Reconfigurable intelligent surface (RIS)-aided near-field communications is investigated. First, the necessity of investigating RIS-aided near-field communications and the advantages brought about by the unique spherical-wave-based near-field propagation are discussed. Then, the family of patch-array-based RISs and metasurface-based RISs are introduced along with their respective near-field channel models. A pair of fundamental performance limits of RIS-aided near-field communications, namely their power scaling law and effective degrees-of-freedom, are analyzed for both patch-array-based and metasurface-based RISs, which reveals the potential performance gains that can be achieved. Furthermore, the associated near-field beam training and beamforming design issues are studied, where a two-stage hierarchical beam training approach and a low-complexity element-wise beamforming design are proposed for RIS-aided near-field communications. Finally, a suite of open research problems is highlighted for motivating future research., Comment: 7 pages, 7 figures, this paper was accepted for publication in IEEE Vehicular Technology Magazine

Communication security has to evolve to a higher plane in the face of the threat from the massive computing power of the emerging quantum computers. Quantum secure direct communication (QSDC) constitutes a promising branch of quantum communication, which is provably secure and overcomes the threat of quantum computing, whilst conveying secret messages directly via the quantum channel. In this survey, we highlight the motivation and the status of QSDC research with special emphasis on its theoretical basis and experimental verification. We will detail the associated point-to-point communication protocols and show how information is protected and transmitted. Finally, we discuss the open challenges as well as the future trends of QSDC networks, emphasizing again that QSDC is not a pure quantum key distribution (QKD) protocol, but a fully-fledged secure communication scheme.

Next-generation wireless networks are expected to utilize the limited radio frequency (RF) resources more efficiently with the aid of intelligent transceivers. To this end, we propose a promising transceiver architecture relying on stacked intelligent metasurfaces (SIM). An SIM is constructed by stacking an array of programmable metasurface layers, where each layer consists of a massive number of low-cost passive meta-atoms that individually manipulate the electromagnetic (EM) waves. By appropriately configuring the passive meta-atoms, an SIM is capable of accomplishing advanced computation and signal processing tasks, such as multiple-input multiple-output (MIMO) precoding/combining, multi-user interference mitigation, and radar sensing, as the EM wave propagates through the multiple layers of the metasurface, which effectively reduces both the RF-related energy consumption and processing delay. Inspired by this, we provide an overview of the SIM-aided MIMO transceiver design, which encompasses its hardware architecture and its potential benefits over state-of-the-art solutions. Furthermore, we discuss promising application scenarios and identify the open research challenges associated with the design of advanced SIM architectures for next-generation wireless networks. Finally, numerical results are provided for quantifying the benefits of wave-based signal processing in wireless systems., Comment: 9 pages, 5 figures, 1 table

A significant increase in the number of reconfigurable intelligent surface (RIS) elements results in a spherical wavefront in the near field of extremely large-scale RIS (XL-RIS). Although the channel matrix of the cascaded two-hop link may become sparse in the polar-domain representation, their accurate estimation of these polar-domain parameters cannot be readily guaranteed. To tackle this challenge, we exploit the sparsity inherent in the cascaded channel. To elaborate, we first estimate the significant path-angles and distances corresponding to the common paths between the BS and the XL-RIS. Then, the individual path parameters associated with different users are recovered. This results in a two-stage channel estimation scheme, in which distinct learning-based networks are used for channel training at each stage. More explicitly, in stage I, a denoising convolutional neural network (DnCNN) is employed for treating the grid mismatches as noise to determine the true grid index of the angles and distances. By contrast, an iterative shrinkage thresholding algorithm (ISTA) based network is proposed for adaptively adjusting the column coherence of the dictionary matrix in stage II. Finally, our simulation results demonstrate that the proposed two-stage learning-based channel estimation outperforms the state-of-the-art benchmarks., Comment: This paper has been accepted for publication in the IEEE GLOBECOM 2023 Workshops Proceedings

The potential synergy between quantum communications and future wireless communication systems is explored. By proposing a quantum-native or quantum-by-design philosophy, the survey examines technologies such as quantum-domain (QD) multi-input multi-output (MIMO), QD non-orthogonal multiple access (NOMA), quantum secure direct communication (QSDC), QD resource allocation, QD routing, and QD artificial intelligence (AI). The recent research advances in these areas are summarized. Given the behavior of photonic and particle-like Terahertz (THz) systems, a comprehensive system-oriented perspective is adopted to assess the feasibility of using quantum communications in future systems. This survey also reviews quantum optimization algorithms and quantum neural networks to explore the potential integration of quantum communication and quantum computing in future systems. Additionally, the current status of quantum sensing, quantum radar, and quantum timing is briefly reviewed in support of future applications. The associated research gaps and future directions are identified, including extending the entanglement coherence time, developing THz quantum communications devices, addressing challenges in channel estimation and tracking, and establishing the theoretical bounds and performance trade-offs of quantum communication, computing, and sensing. This survey offers a unique perspective on the potential for quantum communications to revolutionize future systems and pave the way for even more advanced technologies., Comment: 52 pages, 29 figures

A novel Physical Layer Security (PLS) framework is conceived for enhancing the security of the wireless communication systems by exploiting multi-domain polarization in Multiple-Input Multiple-Output (MIMO) systems. We design a sophisticated key generation scheme based on multi-domain polarization, and the corresponding receivers. An in-depth analysis of the system's secrecy rate is provided, demonstrating the confidentiality of our approach in the presence of eavesdroppers having strong computational capabilities. More explicitly, our simulation results and theoretical analysis corroborate the advantages of the proposed scheme in terms of its bit error rate (BER), block error rate (BLER), and maximum achievable secrecy rate. Our findings indicate that the innovative PLS framework effectively enhances the security and reliability of wireless communication systems. For instance, in a $4\times4$ MIMO setup, the proposed PLS strategy exhibits an improvement of $2$dB compared to conventional MIMO, systems at a BLER of $2\cdot 10^{-5}$ while the eavesdropper's BLER reaches $1$.

A spectrum-sharing satellite-ground integrated network is conceived, consisting of a pair of non-geostationary orbit (NGSO) constellations and multiple terrestrial base stations, which impose the co-frequency interference (CFI) on each other. The CFI may increase upon increasing the number of satellites. To manage the potentially severe interference, we propose to rely on joint multi-domain resource aided interference management (JMDR-IM). Specifically, the coverage overlap of the constellations considered is analyzed. Then, multi-domain resources - including both the beam-domain and power-domain - are jointly utilized for managing the CFI in an overlapping coverage region. This joint resource utilization is performed by relying on our specifically designed beam-shut-off and switching based beam scheduling, as well as on long short-term memory based joint autoregressive moving average assisted deep Q network aided power scheduling. Moreover, the outage probability (OP) of the proposed JMDR-IM scheme is derived, and the asymptotic analysis of the OP is also provided. Our performance evaluations demonstrate the superiority of the proposed JMDR-IM scheme in terms of its increased throughput and reduced OP., Comment: Submitted to IEEE Transactions on Vehicular Technology

Staked intelligent metasurface (SIM) based techniques are developed to perform two-dimensional (2D) direction-of-arrival (DOA) estimation. In contrast to the conventional designs, an advanced SIM in front of the receiving array automatically performs the 2D discrete Fourier transform (DFT) as the incident waves propagate through it. To arrange for the SIM to carry out this task, we design a gradient descent algorithm for iteratively updating the phase shift of each meta-atom in the SIM to minimize the fitting error between the SIM's response and the 2D DFT matrix. To further improve the DOA estimation accuracy, we configure the phase shifts in the input layer of SIM to generate a set of 2D DFT matrices having orthogonal spatial frequency bins. Extensive numerical simulations verify the capability of a well-trained SIM to perform 2D DFT. Specifically, it is demonstrated that the SIM having an optical computational speed achieves an MSE of $10^{-4}$ in 2D DOA estimation., Comment: 16 pages, 5 figures, submitted to IEEE ICC 2024

Wireless surveillance, in which untrusted communications links are proactively monitored by legitimate agencies, has started to garner a lot of interest for enhancing the national security. In this paper, we propose a new cell-free massive multiple-input multiple-output (CF-mMIMO) wireless surveillance system, where a large number of distributed multi-antenna aided legitimate monitoring nodes (MNs) embark on either observing or jamming untrusted communication links. To facilitate concurrent observing and jamming, a subset of the MNs is selected for monitoring the untrusted transmitters (UTs), while the remaining MNs are selected for jamming the untrusted receivers (URs). We analyze the performance of CF-mMIMO wireless surveillance and derive a closed-form expression for the monitoring success probability of MNs. We then propose a greedy algorithm for the observing vs, jamming mode assignment of MNs, followed by the conception of a jamming transmit power allocation algorithm for maximizing the minimum monitoring success probability concerning all the UT and UR pairs based on the associated long-term channel state information knowledge. In conclusion, our proposed CF-mMIMO system is capable of significantly improving the performance of the MNs compared to that of the state-of-the-art baseline. In scenarios of a mediocre number of MNs, our proposed scheme provides an 11-fold improvement in the minimum monitoring success probability compared to its co-located mMIMO benchmarker., Comment: This work has been accepted for publication in 2023 IEEE Global Communications Conference (GLOBECOM)

We investigate the capacity of a broadcast channel with a multi-antenna base station (BS) sending independent messages to multiple users, aided by IRSs with N elements. In particular, both the distributed and centralized IRS deployment architectures are considered. Regarding the distributed IRS, the N IRS elements form multiple IRSs and each of them is installed near a user cluster; while for the centralized IRS, all IRS elements are located in the vicinity of the BS. To draw essential insights, we first derive the maximum capacity achieved by the distributed IRS and centralized IRS, respectively, under the assumption of line-of-sight propagation and homogeneous channel setups. By capturing the fundamental tradeoff between the spatial multiplexing gain and passive beamforming gain, we rigourously prove that the capacity of the distributed IRS is higher than that of the centralized IRS provided that the total number of IRS elements is above a threshold. Motivated by the superiority of the distributed IRS, we then focus on the transmission and element allocation design under the distributed IRS. By exploiting the user channel correlation of intra-clusters and inter-clusters, an efficient hybrid multiple access scheme relying on both spatial and time domains is proposed to fully exploit both the passive beamforming gain and spatial DoF. Moreover, the IRS element allocation problem is investigated for the objectives of sum-rate maximization and minimum user rate maximization, respectively. Finally, extensive numerical results are provided to validate our theoretical finding and also to unveil the effectiveness of the distributed IRS for improving the system capacity under various system setups.

As an attractive enabling technology for next-generation wireless communications, network slicing supports diverse customized services in the global space-air-ground integrated network (SAGIN) with diverse resource constraints. In this paper, we dynamically consider three typical classes of radio access network (RAN) slices, namely high-throughput slices, low-delay slices and wide-coverage slices, under the same underlying physical SAGIN. The throughput, the service delay and the coverage area of these three classes of RAN slices are jointly optimized in a non-scalar form by considering the distinct channel features and service advantages of the terrestrial, aerial and satellite components of SAGINs. A joint central and distributed multi-agent deep deterministic policy gradient (CDMADDPG) algorithm is proposed for solving the above problem to obtain the Pareto optimal solutions. The algorithm first determines the optimal virtual unmanned aerial vehicle (vUAV) positions and the inter-slice sub-channel and power sharing by relying on a centralized unit. Then it optimizes the intra-slice sub-channel and power allocation, and the virtual base station (vBS)/vUAV/virtual low earth orbit (vLEO) satellite deployment in support of three classes of slices by three separate distributed units. Simulation results verify that the proposed method approaches the Pareto-optimal exploitation of multiple RAN slices, and outperforms the benchmarkers., Comment: 19 pages, 14 figures, journal

Next-generation mobile networks promise to support high throughput, massive connectivity, and improved energy efficiency. To achieve these ambitious goals, extremely large-scale antenna arrays (ELAAs) and terahertz communications constitute a pair of promising technologies. This will result in future wireless communications occurring in the near-field regions. To accurately portray the channel characteristics of near-field wireless propagation, spherical wavefront-based models are required and present both opportunities as well as challenges. Following the basics of near-field communications (NFC), we contrast it to conventional far-field communications. Moreover, we cover the key challenges of NFC, including its channel modeling and estimation, near-field beamfocusing, as well as hardware design. Our numerical results demonstrate the potential of NFC in improving the spatial multiplexing gain and positioning accuracy. Finally, a suite of open issues are identified for motivating future research., Comment: 8 pages, 5 figures, 1 table

The envisioned wireless networks of the future entail the provisioning of massive numbers of connections, heterogeneous data traffic, ultra-high spectral efficiency, and low latency services. This vision is spurring research activities focused on defining a next generation multiple access (NGMA) protocol that can accommodate massive numbers of users in different resource blocks, thereby, achieving higher spectral efficiency and increased connectivity compared to conventional multiple access schemes. In this article, we present a multiple access scheme for NGMA in wireless communication systems assisted by multiple reconfigurable intelligent surfaces (RISs). In this regard, considering the practical scenario of static users operating together with mobile ones, we first study the interplay of the design of NGMA schemes and RIS phase configuration in terms of efficiency and complexity. Based on this, we then propose a multiple access framework for RIS-assisted communication systems, and we also design a medium access control (MAC) protocol incorporating RISs. In addition, we give a detailed performance analysis of the designed RIS-assisted MAC protocol. Our extensive simulation results demonstrate that the proposed MAC design outperforms the benchmarks in terms of system throughput and access fairness, and also reveal a trade-off relationship between the system throughput and fairness.

Space-time shift keying-aided orthogonal time frequency space modulation-based multiple access (STSK-OTFS-MA) is proposed for reliable uplink transmission in high-Doppler scenarios. As a beneficial feature of our STSK-OTFS-MA system, extra information bits are mapped onto the indices of the active dispersion matrices, which allows the system to enjoy the joint benefits of both STSK and OTFS signalling. Due to the fact that both the time-, space- and DD-domain degrees of freedom are jointly exploited, our STSK-OTFS-MA achieves increased diversity and coding gains. To mitigate the potentially excessive detection complexity, the sparse structure of the equivalent transmitted symbol vector is exploited, resulting in a pair of low-complexity near-maximum likelihood (ML) multiuser detection algorithms. Explicitly, we conceive a progressive residual check-based greedy detector (PRCGD) and an iterative reduced-space check-based detector (IRCD). Then, we derive both the unconditional single-user pairwise error probability (SU-UPEP) and a tight bit error ratio (BER) union-bound for our single-user STSK-OTFS-MA system employing the ML detector. Furthermore, the discrete-input continuous-output memoryless channel (DCMC) capacity of the proposed system is derived. The optimal dispersion matrices (DMs) are designed based on the maximum attainable diversity and coding gain metrics. Finally, it is demonstrated that our STSK-OTFS-MA system achieves both a lower BER and a higher DCMC capacity than its conventional spatial modulation (SM) {and its orthogonal frequency-division multiplexing (OFDM) counterparts. As a benefit, the proposed system strikes a compelling BER vs. system complexity as well as BER vs. detection complexity trade-offs., Comment: Accepted by IEEE Transactions on Communications

To alleviate the shortage of spectral resources as well as to reduce the weight, volume, and power consumption of wireless systems, joint communication-radar (JCR) systems have become a focus of interest in both civil and military fields. JCR systems based on time-modulated arrays (TMAs) constitute an attractive solution as a benefit of their high degree of beam steering freedom, low cost, and high accuracy. However, their sideband radiation results in energy loss, which is an inherent drawback. Hence the energy-efficiency optimization of TMA-based JCR systems is of salient importance, but most of the existing TMA energy-efficiency optimization methods do not apply to JCR systems. To circumvent their problems, a single-sideband structure is designed for flexibly reconfigurable energy-efficient TMA beam steering. First, some preliminaries on single-sideband TMAs are introduced. Then, a closed-form expression is derived for characterizing the energy efficiency. Finally, the theoretical results are validated by simulations., Comment: 14 pages, 9 figures, Journal

The recently proposed orthogonal delay-Doppler division multiplexing (ODDM) modulation, which is based on the new delay-Doppler (DD) domain orthogonal pulse (DDOP), is studied. A substantial benefit of the DDOP-based ODDM or general delay-Doppler domain multi-carrier (DDMC) modulation is that it achieves orthogonality with respect to the fine time and frequency resolutions of the DD domain. We first revisit the family of wireless channel models conceived for linear time-varying (LTV) channels, and then review the conventional multi-carrier (MC) modulation schemes and their design guidelines for both linear time-invariant (LTI) and LTV channels. Then we discuss the time-varying property of the LTV channels' DD domain impulse response and propose an impulse function based transmission strategy for equivalent sampled DD domain (ESDD) channels. Next, we take an in-depth look into the DDOP and the corresponding ODDM modulation to unveil its unique input-output relation for transmission over ESDD channels. Then, we point out that the conventional MC modulation design guidelines based on the Wely-Heisenberg (WH) frame theory can be relaxed without compromising its orthogonality or without violating the WH frame theory. More specifically, for a communication system having given bandwidth and duration, MC modulation signals can be designed based on a WH subset associated with sufficient (bi)orthogonality, which governs the (bi)orthogonality of the MC signal within the bandwidth and duration. This novel design guideline could potentially open up opportunities for developing future waveforms required by new applications such as communication systems associated with high delay and/or Doppler shifts, as well as integrated sensing and communications, etc., Comment: This paper has been submitted to the IEEE for possible publication. The supplementary material of this work will be posted at https://www.omu.ac.jp/eng/ees-sic/oddm/

Multiple-antenna technologies are advancing towards large-scale aperture sizes and extremely high frequencies, leading to the emergence of near-field communications (NFC) in future wireless systems. To this context, we investigate the degree of freedom (DoF) in near-field multiple-input multiple-output (MIMO) systems. We consider both spatially discrete (SPD) antennas and continuous aperture (CAP) antennas. Additionally, we explore three important DoF-related performance metrics and examine their relationships with the classic DoF. Numerical results demonstrate the benefits of NFC over far-field communications (FFC) in terms of providing increased spatial DoFs. We also identify promising research directions for NFC from a DoF perspective., Comment: 8 pages

The joint uplink/downlink (JUD) design of simultaneously transmitting and reflecting reconfigurable intelligent surfaces (STAR-RIS) is conceived in support of both uplink (UL) and downlink (DL) users. Furthermore, the dual STAR-RISs (D-STAR) concept is conceived as a promising architecture for 360-degree full-plane service coverage, including UL/DL users located between the base station (BS) and the D-STAR as well as beyond. The corresponding regions are termed as primary (P) and secondary (S) regions. Both BS/users exist in the P-region, but only users are located in the S-region. The primary STAR-RIS (STAR-P) plays an important role in terms of tackling the P-region inter-user interference, the self-interference (SI) from the BS and from the reflective as well as refractive UL users imposed on the DL receiver. By contrast, the secondary STAR-RIS (STAR-S) aims for mitigating the S-region interferences. The non-linear and non-convex rate-maximization problem formulated is solved by alternating optimization amongst the decomposed convex sub-problems of the BS beamformer, and the D-STAR amplitude as well as phase shift configurations. We also propose a D-STAR based active beamforming and passive STAR-RIS amplitude/phase (DBAP) optimization scheme to solve the respective sub-problems by Lagrange dual with Dinkelbach's transformation, alternating direction method of multipliers (ADMM) with successive convex approximation (SCA), and penalty convex-concave procedure (PCCP). Our simulation results reveal that the proposed D-STAR architecture outperforms the conventional single RIS, single STAR-RIS, and half-duplex networks. The proposed DBAP of D-STAR outperforms the state-of-the-art solutions found in the open literature for different numbers of quantization levels, geographic deployment, transmit power and for diverse numbers of transmit antennas, patch partitions as well as D-STAR elements., Comment: Accepted by IEEE TCOM

In a transmit preprocessing aided frequency division duplex (FDD) massive multi-user (MU) multiple-input multiple-output (MIMO) scheme assisted orthogonal frequency-division multiplexing (OFDM) system, it is required to feed back the frequency domain channel transfer function (FDCHTF) of each subcarrier at the user equipment (UE) to the base station (BS). The amount of channel state information (CSI) to be fed back to the BS increases linearly with the number of antennas and subcarriers, which may become excessive. Hence we propose a novel CSI feedback compression algorithm based on compressive sensing (CS) by designing a common dictionary (CD) to reduce the CSI feedback of existing algorithms. Most of the prior work on CSI feedback compression considered single-UE systems. Explicitly, we propose a common dictionary learning (CDL) framework for practical frequency-selective channels and design a CD suitable for both single-UE and multi-UE systems. A set of two methods is proposed. Specifically, the first one is the CDL-K singular value decomposition (KSVD) method, which uses the K-SVD algorithm. The second one is the CDL-orthogonal Procrustes (OP) method, which relies on solving the orthogonal Procrustes problem. The CD conceived for exploiting the spatial correlation of channels across all the subcarriers and UEs compresses the CSI at each UE, and {upon reception} reconstructs it at the BS. Our simulation results show that the proposed dictionary's estimated channel vectors have lower normalized mean-squared error (NMSE) than the traditional fixed Discrete Fourier Transform (DFT) based dictionary. The CSI feedback is reduced by 50%, and the memory reduction at both the UE and BS starts from 50% and increases with the number of subcarriers.

Metaverse aims for building a fully immersive virtual shared space, where the users are able to engage in various activities. To successfully deploy the service for each user, the Metaverse service provider and network service provider generally localise the user first and then support the communication between the base station (BS) and the user. A reconfigurable intelligent surface (RIS) is capable of creating a reflected link between the BS and the user to enhance line-of-sight. Furthermore, the new key performance indicators (KPIs) in Metaverse, such as its energy-consumption-dependent total service cost and transmission latency, are often overlooked in ultra-reliable low latency communication (URLLC) designs, which have to be carefully considered in next-generation URLLC (xURLLC) regimes. In this paper, our design objective is to jointly optimise the transmit power, the RIS phase shifts, and the decoding error probability to simultaneously minimise the total service cost and transmission latency and approach the Pareto Front (PF). We conceive a twin-stage central controller, which aims for localising the users first and then supports the communication between the BS and users. In the first stage, we localise the Metaverse users, where the stochastic gradient descent (SGD) algorithm is invoked for accurate user localisation. In the second stage, a meta-learning-based position-dependent multi-objective soft actor and critic (MO-SAC) algorithm is proposed to approach the PF between the total service cost and transmission latency and to further optimise the latency-dependent reliability. Our numerical results demonstrate that ..., Comment: Accepted by IEEE Transactions on Communications

The emerging drone swarms are capable of carrying out sophisticated tasks in support of demanding Internet-of-Things (IoT) applications by synergistically working together. However, the target area may be out of the coverage of the ground station and it may be impractical to deploy a large number of drones in the target area due to cost, electromagnetic interference and flight-safety regulations. By exploiting the innate \emph{agility} and \emph{mobility} of unmanned aerial vehicles (UAVs), we conceive a mobile relaying-assisted drone swarm network architecture, which is capable of extending the coverage of the ground station and enhancing the effective end-to-end throughput. Explicitly, a swarm of drones forms a data-collecting drone swarm (DCDS) designed for sensing and collecting data with the aid of their mounted cameras and/or sensors, and a powerful relay-UAV (RUAV) acts as a mobile relay for conveying data between the DCDS and a ground station (GS). Given a time period, in order to maximize the data delivered whilst minimizing the delay imposed, we harness an $\epsilon$-multiple objective genetic algorithm ($\epsilon$-MOGA) assisted Pareto-optimization scheme. Our simulation results demonstrate that the proposed mobile relaying is capable of delivering more data. As specific examples investigated in our simulations, our mobile relaying-assisted drone swarm network is capable of delivering $45.38\%$ more data than the benchmark solutions, when a stationary relay is available, and it is capable of delivering $26.86\%$ more data than the benchmark solutions when no stationary relay is available.

In orthogonal time sequency multiplexing (OTSM) modulation, the information symbols are conveyed in the delay-sequency domain upon exploiting the inverse Walsh Hadamard transform (IWHT). It has been shown that OTSM is capable of attaining a bit error ratio (BER) similar to that of orthogonal time-frequency space (OTFS) modulation at a lower complexity, since the saving of multiplication operations in the IWHT. Hence we provide its BER performance analysis and characterize its detection complexity. We commence by deriving its generalized input-output relationship and its unconditional pairwise error probability (UPEP). Then, its BER upper bound is derived in closed form under both ideal and imperfect channel estimation conditions, which is shown to be tight at moderate to high signal-to-noise ratios (SNRs). Moreover, a novel approximate message passing (AMP) aided OTSM detection framework is proposed. Specifically, to circumvent the high residual BER of the conventional AMP detector, we proposed a vector AMP-based expectation-maximization (VAMP-EM) detector for performing joint data detection and noise variance estimation. The variance auto-tuning algorithm based on the EM algorithm is designed for the VAMP-EM detector to further improve the convergence performance. The simulation results illustrate that the VAMP-EM detector is capable of striking an attractive BER vs. complexity trade-off than the state-of-the-art schemes as well as providing a better convergence. Finally, we propose AMP and VAMP-EM turbo receivers for low-density parity-check (LDPC)-coded OTSM systems. It is demonstrated that our proposed VAMP-EM turbo receiver is capable of providing both BER and convergence performance improvements over the conventional AMP solution., Comment: Accepted in IEEE Transactions on Wireless Communications

Hybrid precoder and combiner designs are conceived for decentralized parameter estimation in millimeter wave (mmWave) multiple-input multiple-output (MIMO) wireless sensor networks (WSNs). More explicitly, efficient pre- and post-processing of the sensor observations and received signal are proposed for the minimum mean square error (MMSE) estimation of a parameter vector. The proposed techniques exploit the limited scattering nature of the mmWave MIMO channel for formulating the hybrid transceiver design framework as a multiple measurement vectors (MMV)-based sparse signal recovery problem. This is then solved using the iterative appealingly low-complexity simultaneous orthogonal matching pursuit (SOMP). Tailor-made designs are presented for WSNs operating under both total and per-sensor power constraints, while considering ideal noiseless as well as realistic noisy sensors. Furthermore, both the Bayesian Cramer-Rao lower bound and the centralized MMSE bound are derived for benchmarking the proposed decentralized estimation schemes. Our simulation results demonstrate the efficiency of the designs advocated and verify the analytical findings.

The real-time unmanned aerial vehicle (UAV) trajectory design of secure integrated sensing and communication (ISAC) is optimized. In particular, the UAV serves both as a downlink transmitter and a radar receiver. The legitimate user (Bob) roams on ground through a series of unknown locations, while the eavesdropper moves following a fixed known trajectory. To maximize the real-time secrecy rate, we propose an extended Kalman filtering (EKF)-based method for tracking and predicting Bob's location at the UAV based on the delay measurements extracted from the sensing echoes. We then formulate a non-convex real-time trajectory design problem and develop an efficient iterative algorithm for finding a near optimal solution. Our numerical results demonstrate that the proposed algorithm is capable of accurately tracking Bob and strikes a compelling legitimate vs. leakage rate trade-off.

Reconfigurable intelligent surfaces (RIS) are capable of beneficially ameliorating the propagation environment by appropriately controlling the passive reflecting elements. To extend the coverage area, the concept of simultaneous transmitting and reflecting reconfigurable intelligent surfaces (STAR-RIS) has been proposed, yielding supporting 360^circ coverage user equipment (UE) located on both sides of the RIS. In this paper, we theoretically formulate the ergodic sum-rate of the STAR-RIS assisted non-orthogonal multiple access (NOMA) uplink in the face of channel estimation errors and hardware impairments (HWI). Specifically, the STAR-RIS phase shift is configured based on the statistical channel state information (CSI), followed by linear minimum mean square error (LMMSE) channel estimation of the equivalent channel spanning from the UEs to the access point (AP). Afterwards, successive interference cancellation (SIC) is employed at the AP using the estimated instantaneous CSI, and we derive the theoretical ergodic sum-rate upper bound for both perfect and imperfect SIC decoding algorithm. The theoretical analysis and the simulation results show that both the channel estimation and the ergodic sum-rate have performance floor at high transmit power region caused by transceiver hardware impairments., Comment: 15 pages, 10 figures

An orthogonal affine-precoded superimposed pilot-based architecture is developed for the cyclic prefix (CP)-aided SISO and MIMO orthogonal time frequency space systems relying on arbitrary transmitter-receiver pulse shaping. The data and pilot symbol matrices are affine-precoded and superimposed in the delay Doppler-domain followed by the development of an end-to-end DD-domain relationship for the input-output symbols. At the receiver, the decoupled pilot and data symbol are extracted by employing orthogonal precoder matrices, which eliminates the mutual interference. Furthermore, a novel pilot-aided Bayesian learning (PA-BL) technique is conceived for the channel state information (CSI) estimation of SISO OTFS systems based on the expectation-maximization (EM) technique. Subsequently, a data-aided Bayesian learning (DA-BL)-based joint CSI estimation and data detection technique is proposed, which beneficially harnesses the estimated data symbols for improved CSI estimation. In this scenario our sophisticated data detection rule also integrates the CSI uncertainty of channel estimation into our the linear minimum mean square error (LMMSE) detectors. The AP-SIP framework is also extended to MIMO OTFS systems, wherein the DD-domain input matrix is affine-precoded for each transmit antenna (TA). Then an EM algorithm-based PA-BL scheme is derived for simultaneous row-group sparse CSI estimation for this system, followed also by our data-aided DA-BL scheme that performs joint CSI estimation and data detection. Moreover, the Bayesian Cramer-Rao bounds (BCRBs) are also derived for both SISO as well as MIMO OTFS systems. Finally, simulation results are presented for characterizing the performance of the proposed CSI estimation techniques in a range of typical settings along with their bit error rate (BER) performance in comparison to an ideal system having perfect CSI.