Search

Astrocytes play many essential roles in the central nervous system (CNS) and are altered significantly in disease. These reactive astrocytes contribute to neuroinflammation and disease progression in many pathologies, including glioblastoma (GB), an aggressive form of brain cancer. Current in vitro platforms do not allow for accurate modeling of reactive astrocytes. In this study, we sought to engineer a simple bioengineered hydrogel platform that would support the growth of primary human astrocytes and allow for accurate analysis of various reactive states. After validating this platform using morphological analysis and qPCR, we then used the platform to begin investigating how astrocytes respond to GB derived extracellular vesicles (EVs) and soluble factors (SF). These studies reveal that EVs and SFs induce distinct astrocytic states. In future studies, this platform can be used to study how astrocytes transform the tumor microenvironment in GB and other diseases of the CNS. STATEMENT OF SIGNIFICANCE: Recent work has shown that astrocytes help maintain brain homeostasis and may contribute to disease progression in diseases such as glioblastoma (GB), a deadly primary brain cancer. In vitro models allow researchers to study basic mechanisms of astrocyte biology in healthy and diseased conditions, however current in vitro systems do not accurately mimic the native brain microenvironment. In this study, we show that our hydrogel system supports primary human astrocyte culture with an accurate phenotype and allows us to study how astrocytes change in response to a variety of inflammatory signals in GB. This platform could be used further investigate astrocyte behavior and possible therapeutics that target reactive astrocytes in GB and other brain diseases., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.)

Posterior capsule opacification (PCO) is the most common complication of cataract surgery, and intraocular lens (IOL) implantation is the standard of care for cataract patients. Induction of post-operative epithelial-mesenchymal transition (EMT) in residual lens epithelial cells (LEC) is the main mechanism by which PCO forms. Previous studies have shown that IOLs made with different materials have varying incidence of PCO. The aim of this paper was to study the interactions between human (h)LEC and polymer substrates. Polymers and copolymers of 2-hydroxyethyl methacrylate (HEMA) and 3-methacryloxypropyl tris (trimethylsiloxy) silane (TRIS) were synthesized and evaluated due to the clinical use of these materials as ocular biomaterials and implants. The chemical properties of the polymer surfaces were evaluated by contact angle, and polymer stiffness and roughness were measured using atomic force microscopy. In vitro studies showed the effect of polymer mechanical properties on the behavior of hLECs. Stiffer polymers increased α-smooth muscle actin expression and induced cell elongation. Hydrophobic and rough polymer surfaces increased cell attachment. These results demonstrate that attachment of hLECs on different surfaces is affected by surface properties in vitro , and evaluating these properties may be useful for investigating prevention of PCO.

Extracellular vesicles (EVs) are micro and nanoscale packages that circulate in all bodily fluids and play an important role in intercellular communication by shuttling biomolecules to nearby and distant cells. However, producing sufficient amounts of EVs for many types of in vitro studies using standard culture methods can be challenging, and despite the success of some bioreactors in increasing EV-production, it is still largely unknown how individual culture conditions can alter the production and content of EVs. In this study, we demonstrate a simple and inexpensive micropatterning technique that can be used to produce polystyrene microtracks over a 100 mm diameter growth surface area. We then demonstrate that these microtracks can play a significant role in increasing EV production using a triple-negative breast cancer cell line (MDA-MB-231) and that these changes in EV production correlate with increases in cellular aspect ratio, alignment of the cells' long axes to the microtracks, and single-cell migration rates. These findings have implications in both biomanufacturing of EVs and potentially in enhancing the biomimicry of EVs produced in vitro., (Copyright © 2021 Elsevier B.V. All rights reserved.)

The artefact known as speckle can plague numerous imaging applications where the narrow linewidth of laser light is required, which includes laser projection and medical imaging. Here, we report on the use of thin-film chiral nematic liquid crystal (LC) devices that can be used to mitigate the influence of speckle when subjected to an applied electric field. Results are presented which show that the speckle contrast (a quantitative measure of the presence of speckle) can be significantly reduced by decreasing the pitch of the chiral nematic LC from 2700 to 244 nm. Further reduction in the speckle contrast can be observed by operating the diffuser technology at a temperature close to the chiral nematic to isotropic transition. At such temperatures, we observe a simultaneous improvement in the transmission of light through the device and a decrease in the electric field amplitude required for the minimum speckle contrast value. We conclude by presenting a laser projected image of the 1951 USAF target with and without the LC device to demonstrate the visual improvement as a result of the speckle reduction.

Highly migratory cancer cells often lead to metastasis and recurrence and are responsible for the high mortality rates in many cancers despite aggressive treatment. Recently, the migratory behavior of patient-derived glioblastoma multiforme cells on microtracks has shown potential in predicting the likelihood of recurrence, while at the same time, antimetastasis drugs have been developed which require simple yet relevant high-throughput screening systems. However, robust in vitro platforms which can reliably seed single cells and measure their migration while mimicking the physiological tumor microenvironment have not been demonstrated. In this study, we demonstrate a microfluidic device which hydrodynamically seeds single cancer cells onto stamped or femtosecond laser ablated polystyrene microtracks, promoting 1D migratory behavior due to the cells' tendency to follow topographical cues. Using time-lapse microscopy, we found that single U87 glioblastoma multiforme cells migrated more slowly on laser ablated microtracks compared to stamped microtracks of equal width and spacing (p < 0.05) and exhibited greater directional persistence on both 1D patterns compared to flat polystyrene (p < 0.05). Single-cell morphologies also differed significantly between flat and 1D patterns, with cells on 1D substrates exhibiting higher aspect ratios and less circularity (p < 0.05). This microfluidic platform could lead to automated quantification of single-cell migratory behavior due to the high predictability of hydrodynamic seeding and guided 1D migration, an important step to realizing the potential of microfluidic migration assays for drug screening and individualized medicine.

Because of limits on specificity and purity to allow for in-depth protein profiling, a standardized method for exosome isolation has yet to be established. In this study, we describe a novel, in-house microfluidic-based device to isolate exosomes from culture media and patient samples. This technology overcomes contamination issues because sample separation is based on the expression of highly specific surface markers CD63 and EpCAM. Mass spectrometry revealed over 25 exosome proteins that are differentially expressed in high-grade serous ovarian cancer (HGSOC) cell lines compared with normal cells-ovarian surface epithelia cells and fallopian tube secretory epithelial cells (FTSEC). Top exosome proteins were identified on the basis of their fold change and statistical significance between groups. Ingenuity pathway analysis identified STAT3 and HGF as top regulator proteins. We further validated exosome proteins of interest (pSTAT3, HGF, and IL6) in HGSOC samples of origin-based cell lines (OVCAR-8, FTSEC) and in early-stage HGSOC patient serum exosome samples using LC/MS-MS and proximity extension assay. Our microfluidic device will allow us to make new discoveries for exosome-based biomarkers for the early detection of HGSOC and will contribute to the development of new targeted therapies based on signaling pathways that are unique to HGSOC, both of which could improve the outcome for women with HGSOC. SIGNIFICANCE: A unique platform utilizing a microfluidic device enables the discovery of new exosome-based biomarkers in ovarian cancer., (©2019 American Association for Cancer Research.)

Exosomes are nanoscale vesicles found in many bodily fluids which play a significant role in cell-to-cell signaling and contain biomolecules indicative of their cells of origin. Recently, microfluidic devices have provided the ability to efficiently capture exosomes based on specific membrane biomarkers, but releasing the captured exosomes intact and label-free for downstream characterization and experimentation remains a challenge. We present a herringbone-grooved microfluidic device which is covalently functionalized with antibodies against general and cancer exosome membrane biomarkers (CD9 and EpCAM) to isolate exosomes from small volumes of high-grade serous ovarian cancer (HGSOC) serum. Following capture, intact exosomes are released label-free using a low pH buffer and immediately neutralized downstream to ensure their stability. Characterization of captured and released exosomes was performed using fluorescence microscopy, nanoparticle tracking analysis, flow-cytometry, and SEM. Our results demonstrate the successful isolation of intact and label-free exosomes, indicate that the amount of both total and EpCAM+ exosomes increases with HGSOC disease progression, and demonstrate the downstream internalization of isolated exosomes by OVCAR8 cells. This device and approach can be utilized for a nearly limitless range of downstream exosome analytical and experimental techniques, both on and off-chip.

The alveolar-capillary barrier is composed of epithelial and endothelial cells interacting across a fibrous extracelluar matrix (ECM). Although remodeling of the ECM occurs during several lung disorders, it is not known how fiber structure and mechanics influences cell injury during cyclic airway reopening as occurs during mechanical ventilation (atelectrauma). We have developed a novel in vitro platform that mimics the micro/nano-scale architecture of the alveolar microenvironment and have used this system to investigate how ECM microstructural properties influence epithelial cell injury during airway reopening. In addition to epithelial-endothelial interactions, our platform accounts for the fibrous topography of the basal membrane and allows for easy modulation of fiber size/diameter, density and stiffness. Results indicate that fiber stiffness and topography significantly influence epithelial/endothelial barrier function where increased fiber stiffness/density resulted in altered cytoskeletal structure, increased tight junction (TJ) formation and reduced barrier permeability. However, cells on rigid/dense fibers were also more susceptible to injury during airway reopening. These results indicate that changes in the mechanics and architecture of the lung microenvironment can significantly alter cell function and injury and demonstrate the importance of implementing in vitro models that more closely resemble the natural conditions of the lung microenvironment.

Enhanced glioma-stem-cell (GSC) motility and therapy resistance are considered to play key roles in tumor cell dissemination and recurrence. As such, a better understanding of the mechanisms by which these cells disseminate and withstand therapy could lead to more efficacious treatments. Here, we introduce a novel micro-/nanotechnology-enabled chip platform for performing live-cell interrogation of patient-derived GSCs with single-clone resolution. On-chip analysis revealed marked intertumoral differences (>10-fold) in single-clone motility profiles between two populations of GSCs, which correlated well with results from tumor-xenograft experiments and gene-expression analyses. Further chip-based examination of the more-aggressive GSC population revealed pronounced interclonal variations in motility capabilities (up to ∼4-fold) as well as gene-expression profiles at the single-cell level. Chip-supported therapy resistance studies with a chemotherapeutic agent (i.e., temozolomide) and an oligo RNA (anti-miR363) revealed a subpopulation of CD44-high GSCs with strong antiapoptotic behavior as well as enhanced motility capabilities. The living-cell-interrogation chip platform described herein enables thorough and large-scale live monitoring of heterogeneous cancer-cell populations with single-cell resolution, which is not achievable by any other existing technology and thus has the potential to provide new insights into the cellular and molecular mechanisms modulating glioma-stem-cell dissemination and therapy resistance., Competing Interests: Notes The authors declare no competing financial interest.

A primary goal in bone tissue engineering is the design of implants that induce controlled, guided, and rapid healing. The events that normally lead to the integration of an implant into bone and determine the performance of the device occur mainly at the tissue-implant interface. Topographical surface modification of a biomaterial might be an efficient tool for inducing stem cell osteogenic differentiation and replace the use of biochemical stimuli. The main goal of this work was to develop micropatterned bioactive silica thin films to induce the osteogenic differentiation of human bone marrow-derived mesenchymal stem cells (hMSCs) only through topographical stimuli. Line and pillar micropatterns were developed by a combination of sol-gel/soft lithography and characterized by scanning electron microscopy, atomic force microscopy, and contact angle measurements. hMSCs were cultured onto the microfabricated thin films and flat control for up to 21 days under basal conditions. The micropatterned groups induced levels of osteogenic differentiation and expression of osteoblast-associated markers higher than those of the flat controls. Via comparison of the micropatterns, the pillars caused a stronger response of the osteogenic differentiation of hMSCs with a higher level of expression of osteoblast-associated markers, ALP activity, and extracellular matrix mineralization after the cells had been cultured for 21 days. These findings suggest that specific microtopographic cues can direct hMSCs toward osteogenic differentiation.

Interfacial flows during cyclic airway reopening are an important source of ventilator-induced lung injury. However, it is not known how changes in airway wall compliance influence cell injury during airway reopening. We used an in vitro model of airway reopening in a compliant microchannel to investigate how airway wall stiffness influences epithelial cell injury. Epithelial cells were grown on gel substrates with different rigidities, and cellular responses to substrate stiffness were evaluated in terms of metabolic activity, mechanics, morphology, and adhesion. Repeated microbubble propagations were used to simulate cyclic airway reopening, and cell injury and detachment were quantified via live/dead staining. Although cells cultured on softer gels exhibited a reduced elastic modulus, these cells experienced less plasma membrane rupture/necrosis. Cells on rigid gels exhibited a minor, but statistically significant, increase in the power law exponent and also exhibited a significantly larger height-to-length aspect ratio. Previous studies indicate that this change in morphology amplifies interfacial stresses and, therefore, correlates with the increased necrosis observed during airway reopening. Although cells cultured on stiff substrates exhibited more plasma membrane rupture, these cells experienced significantly less detachment and monolayer disruption during airway reopening. Western blotting and immunofluorescence indicate that this protection from detachment and monolayer disruption correlates with increased focal adhesion kinase and phosphorylated paxillin expression. Therefore, changes in cell morphology and focal adhesion structure may govern injury responses during compliant airway reopening. In addition, these results indicate that changes in airway compliance, as occurs during fibrosis or emphysema, may significantly influence cell injury during mechanical ventilation., (Copyright © 2014 the American Physiological Society.)

Lab on a chip (LOC) systems provide interesting and low-cost solutions for key studies and applications in the biomedical field. Along with microfluidics, these microdevices make single-cell manipulation possible with high spatial and temporal resolution. In this work we have designed, fabricated and characterized a versatile and inexpensive microfluidic platform for on-chip selective single-cell trapping and treatment using laminar co-flow. The combination of co-existing laminar flow manipulation and hydrodynamic single-cell trapping for selective treatment offers a cost-effective solution for studying the effect of novel drugs on single-cells. The operation of the whole system is experimentally simple, highly adaptable and requires no specific equipment. As a proof of concept, a cytotoxicity study of ethanol in isolated hepatocytes is presented. The developed microfluidic platform controlled by means of co-flow is an attractive and multipurpose solution for the study of new substances of high interest in cell biology research. In addition, this platform will pave the way for the study of cell behavior under dynamic and controllable fluidic conditions providing information at the individual cell level. Thus, this analysis device could also hold a great potential to easily use the trapped cells as sensing elements expanding its functionalities as a cell-based biosensor with single-cell resolution., (Copyright © 2014 Elsevier B.V. All rights reserved.)

The growing demand for better implant aesthetics has led to increased research on the development of all-ceramic dental implants. The use of microtextured coatings with enhanced properties has been presented as a viable way to improve tissue integrability of all-ceramic implants. The aim of this study was to evaluate the effects of different densities of anisotropic microtextured silica thin films, which served as a model coating, on the behavior of human osteoblast-like cells. The differential responses of human osteoblast-like cells to anisotropic silica microtextures with varying densities, produced via a combination of sol-gel and soft lithography processing, were evaluated in terms of alignment, elongation (using fluorescence microscopy), overall cellular activity, and the expression/activity levels of alkaline phosphatase (ALP). Statistical analysis was conducted using one-way ANOVA/Tukey HSD post hoc test. The thin films were thoroughly characterized via scanning electron microscopy/energy dispersive spectroscopy, Fourier transform infrared, and contact angle measurements. Thin film characterization revealed increased nanoscale roughness and reduced wettability on the micropatterned surfaces. Cell culture experiments indicated that the microtextures induced cell alignment, elongation, and guided colonization on the surface. Cells cultured on denser micropatterns exhibited increased metabolic activity (t = 14-21 days). The early expression/activity levels of ALP released into the medium were found to be significantly higher only on the least dense micropattern. These results suggest the possibility that microstructured silica thin films could be used to guide and enhance peri-implant cell/tissue responses, potentially improving tissue integration for metallic and all-ceramic dental implants., (Copyright © 2013 Wiley Periodicals, Inc.)

Electrically conducting polymers (CPs) were found to stimulate various cell types such as neurons, osteoblasts, and fibroblasts in both in vitro and in vivo studies. However, to our knowledge, no studies have been reported on the utility of CPs in stimulation of cancer or tumor cells in the literature. Here we report a facile fabrication method of self-doped sulfonated polyaniline (SPAN)-based interdigitated electrodes (IDEs) for controlled electrical stimulation of human osteosarcoma (HOS) cells. Increased degree of sulfonation was found to increase the SPAN conductivity, which in turn improved the cell attachment and cell growth without electrical stimulation. However, an enhanced cell growth was observed under controlled electrical (AC) stimulation at low applied voltage and frequency (≤800 mV and ≤1 kHz). The cell growth reached a maximum threshold at an applied voltage or frequency and beyond which pronounced cell death was observed. We believe that these organic electrodes may find utility in electrical stimulation of cancer or tumor cells for therapy and research and may also provide an alternative to the conventional metal-based electrodes.

Unlabelled: Surface modification of biomaterials has been shown to improve the biological response to dental implants. The ability to create a controlled micro-texture on the implant via additive surface modification techniques with bioactive nanohydroxyapatite (nanoHA) may positively influence guided tissue regeneration., Objective: The main goal of this study was to produce micro-fabricated SiO(2) surfaces modified with nanohydroxyapatite particles and to characterize their influence on the biological response of Human Dental-Pulp Mesenchymal Stem Cells (hDP-MSCs) and Streptococcus mutans., Materials and Methods: A combined methodology of sol-gel and soft-lithography was used to produce micropatterned SiO(2) thin films with different percentages of nanoHA micro-aggregates. The surfaces were characterized by SEM/EDS, FT-IR/ATR, AFM, XPS quantitative elemental percentage and contact angle measurements. Biological characterization was performed using hDP-MSCs cultures, while Streptococcus mutans was the selected microorganism to evaluate the bacterial adhesion on the thin films., Results: Micropatterned SiO(2) surfaces with 0%, 1% and 5% of nanoHA micro-aggregates were successfully produced using a combination of sol-gel and soft-lithography. These surfaces controlled the biological response, triggering alignment and oriented proliferation of hDP-MSCs and significant differences in the adhesion of S. mutans to the different surfaces., Significance: The micropatterned surfaces exhibited biocompatible behavior that induced an oriented adhesion and proliferation of hDP-MSCs while SiO(2) presented low bacterial adhesion. These results show that the combination of sol-gel with soft-lithography is a good approach to create micropatterned surfaces with bioactive nanoparticles for guided tissue regeneration., (Copyright © 2012 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.)

Guided cell migration plays a crucial role in tumor metastasis, which is considered to be the major cause of death in cancer patients. Such behavior is regulated in part by micro/nanoscale topographical cues present in the parenchyma or stroma in the form of fiber-like and/or conduit-like structures (e.g., white matter tracts, blood/lymphatic vessels, subpial and subperitoneal spaces). In this paper we used soft lithography micromolding to develop a tissue culture polystyrene platform with a microscale surface pattern that was able to induce guided cell motility along/through fiber-/conduit-like structures. The migratory behaviors of primary (glioma) and metastatic (lung and colon) tumors excised from the brain were monitored via time-lapse microscopy at the single cell level. All the tumor cells exhibited axially persistent cell migration, with percentages of unidirectionally motile cells of 84.0 ± 3.5%, 58.3 ± 6.8% and 69.4 ± 5.4% for the glioma, lung, and colon tumor cells, respectively. Lung tumor cells showed the highest migratory velocities (41.8 ± 4.6 μm h(-1)) compared to glioma (24.0 ± 1.8 μm h(-1)) and colon (26.7 ± 2.8 μm h(-1)) tumor cells. This platform could potentially be used in conjunction with other biological assays to probe the mechanisms underlying the metastatic phenotype under guided cell migration conditions, and possibly by itself as an indicator of the effectiveness of treatments that target specific tumor cell motility behaviors.

Insulin-expressing islet-like cell clusters derived from precursor cells have significant potential in the treatment of type-I diabetes. Given that cluster size and uniformity are known to influence islet cell behavior, the ability to effectively control these parameters could find applications in the development of anti-diabetic therapies. In this work, we combined micro and nanofabrication techniques to build a biodegradable platform capable of supporting the formation of islet-like structures from pancreatic precursors. Soft lithography and electrospinning were used to create arrays of microwells (150-500 μm diameter) structurally interfaced with a porous sheet of micro/nanoscale polyblend fibers (~0.5-10 μm in cross-sectional size), upon which human pancreatic ductal epithelial cells anchored and assembled into insulin-expressing 3D clusters. The microwells effectively regulated the spatial distribution of the cells on the platform, as well as cluster size, shape and homogeneity. Average cluster cross-sectional area (~14000-17500 μm(2)) varied in proportion to the microwell dimensions, and mean circularity values remained above 0.7 for all microwell sizes. In comparison, clustering on control surfaces (fibers without microwells or tissue culture plastic) resulted in irregularly shaped/sized cell aggregates. Immunoreactivity for insulin, C-peptide and glucagon was detected on both the platform and control surfaces; however, intracellular levels of C-peptide/cell were ~60 % higher on the platform.

Modified Portland cement porous scaffolds with suitable characteristics for load-bearing bone tissue engineering applications were manufactured by combining the particulate leaching and foaming methods. Non-crosslinked polydimethylsiloxane was evaluated as a potential reinforcing material. The scaffolds presented average porosities between 70 and 80% with mean pore sizes ranging from 300 μm up to 5.0 mm. Non-reinforced scaffolds presented compressive strengths and elastic modulus values of 2.6 and 245 MPa, respectively, whereas reinforced scaffolds exhibited 4.2 and 443 MPa, respectively, an increase of ∼62 and 80%. Portland cement scaffolds supported human osteoblast-like cell adhesion, spreading, and propagation (t = 1-28 days). Cell metabolism and alkaline phosphatase activity were found to be enhanced at longer culture intervals (t ≥ 14 days). These results suggest the possibility of obtaining strong and biocompatible scaffolds for bone repair applications from inexpensive, yet technologically advanced materials such as Portland cement., (Copyright © 2011 Wiley Periodicals, Inc.)

The need for a suitable scaffolding material for load bearing bone tissue engineering still has yet to be met satisfactorily. In this study, Portland cement and Portland cement/metakaolin (MK) blends were processed to render them biologically and mechanically suitable for such application. Portland cement was mixed with MK at different ratios. The slurries were hydrated under atmospheric (noncarbonated samples) and high-CO₂ conditions (carbonated samples). The mechanical properties were characterized via compressive tests. The bioactivity was analyzed in a simulated body fluid solution. Scanning electron microscopy and energy dispersive spectroscopy were used to evaluate sample morphology and chemistry. The cytocompatibility (direct contact assay, MTT test, and alkaline phosphatase activity) was tested using human osteoblast-like cells. Cell responses were observed via conventional and electron microscopy. The results showed that the implementation of MK did not significantly influence the mechanical properties. All the samples evidenced bioactive behavior. Cell experiments confirmed a highly cytotoxic response to the noncarbonated specimens. The introduction of MK as well as the CO₂ pretreatment significantly improved the cytocompatibility of the specimens. These results show that properly processed Portland cement and Portland cement/MK blends could present suitable properties for the development of load-bearing scaffolding structures in bone tissue-engineering applications., (Copyright © 2011 Wiley Periodicals, Inc.)

We report here that by good design, polyaniline (PANI) can be cytocompatible and formed into usable scaffolds for bio-medical applications. By adjusting the ratio of two monomers, aniline (AN) and metanilic acid (MA), a series of copolymers with different sulfonation degrees have been synthesized. Four-probe conductivity measurements showed that as the sulfonation degree increased, the conductivity decreased. XPS analysis was used to determine the sulfur/nitrogen ratio. In vitro cell culture study was conducted with human osteosarcoma (HOS) cells. Microscopic observation did not show abnormal cellular behavior when sulfonated polyaniline (SPAN) was put in direct contact with HOS cells. Cells growing on the non-transparent dark green SPAN films were observed with fluorescence by laser scanning cytometry (LSC). In proliferation studies more than 70% of cells were found viable on SPAN compared to 88% for poly(L-lactic acid) with the number of cells growing on glass as a control, indicating generally good biocompatibility. We expect these polymers would have great potential in biological applications of conducting polymers as we determine that a variety of physical and chemical properties can be controlled through synthesis., (Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Unlabelled: Titanium implants are the gold standard in dentistry; however, problems such as gingival tarnishing and peri-implantitis have been reported. For zirconia to become a competitive alternative dental implant material, surface modification techniques that induce guided tissue growth must be developed., Objectives: To develop alternative surface modification techniques to promote guided tissue regeneration on zirconia materials, for applications in dental implantology., Methods: A methodology that combined soft lithography and sol-gel chemistry was used to obtain isotropic micropatterned silica coatings on yttria-stabilized zirconia substrates. The materials were characterized via chemical, structural, surface morphology approaches. In vitro biological behavior was evaluated in terms of early adhesion and viability/metabolic activity of human osteoblast-like cells. Statistical analysis was conducted using one-way ANOVA/Tukey HSD post hoc test., Results: Isotropic micropatterned silica coatings on yttria-stabilized zirconia substrates were obtained using a combined approach based on sol-gel technology and soft lithography. Micropatterned silica surfaces exhibited a biocompatible behavior, and modulated cell responses (i.e. inducing early alignment of osteoblast-like cells). After 7d of culture, the cells fully covered the top surfaces of pillar microstructured silica films., Significance: The micropatterned silica films on zirconia showed a biocompatible response, and were capable of inducing guided osteoblastic cell adhesion, spreading and propagation. The results herein presented suggest that surface-modified ceramic implants via soft lithography and sol-gel chemistry could potentially be used to guide periodontal tissue regeneration, thus promoting tight tissue apposition, and avoiding gingival retraction and peri-implantitis., (Copyright © 2011 Academy of Dental Materials. All rights reserved.)

Polyvinylidene fluoride (PVDF) microstructures are of interest for a number of BioMEMS applications both for their piezoelectric and biocompatible properties. In this work, simple soft lithography-based techniques were developed to fabricate PVDF microstructures with diverse geometries, including microarrays of pillars, lines, and wells. Four different microstructure configurations were created: freestanding, stamped discontinuous, stamped continuous and imprinted patterns. Features with lateral dimensions down to 1 μm were consistently reproduced on 2.5 cm diameter areas. Atomic force microscopy (AFM) measurements of poled PVDF microstructures confirmed a marked inverse piezoelectric behavior. The techniques presented here have a number of advantages over previously demonstrated PVDF micropatterning approaches.

Real-time reverse transcription PCR (RT-qPCR) relies on a housekeeping or normalizer gene whose expression remains constant throughout the experiment. RT-qPCR is commonly used for characterization of human bone marrow mesenchymal stem cells (hBMSCs). However, to the best of our knowledge, there are no studies validating the expression stability of the genes used as normalizers during hBMSCs differentiation. This work aimed to study the stability of the housekeeping genes beta-actin, glyceraldehyde-3-phosphate dehydrogenase (GAPDH) and ribosomal protein L13A (RPL13A) during the osteogenic differentiation of hBMSCs. Their stability was evaluated via RT-qPCR in 14 and 20 day differentiation assays to the osteogenic lineage. Different normalization strategies were evaluated to quantify the osteogenic markers collagen type I, bone sialoprotein and osteonectin. Cell differentiation was confirmed via alizarin red staining. The results demonstrated up-regulation of beta-actin with maximum fold changes (MFC) of 4.38. GAPDH and RPL13A were not regulated by osteogenic media after 14 days and presented average fold changes lower than 2 in 20 day cultures. RPL13A (MFC < 2) had a greater stability when normalizing as a function of culture time compared with GAPDH (MFC

Guided assembly of microscale tissue subunits (i.e. 3D cell clusters/aggregates) has found applications in cell therapy/tissue engineering, cell and developmental biology, and drug discovery. As cluster size and geometry are known to influence cellular responses, the ability to spatially control cluster formation in a high throughput manner could be advantageous for many biomedical applications. In this work, a micro- and nanofabricated platform was developed for this purpose, consisting of a soft-lithographically fabricated array of through-thickness microwells structurally bonded to a sheet of electrospun fibers. The microwells and fibers were manufactured from several polymers of biomedical interest. Human hepatocytes were used as model cells to demonstrate the ability of the platform to allow controlled cluster formation. In addition, the ability of the device to support studies on semi-controlled heterotypic interactions was demonstrated by co-culturing hepatocytes and fibroblasts. Preliminary experiments with other cells of interest (pancreatic cells, embryonic stem cells, and cardiomyocytes) were also conducted. Our platform possesses several advantages over previously developed microwell arrays: a more in vivo-like topographical stimulation of cells; better nutrient/waste exchange through the underlying nanofiber mat; and easy integration into standard two-chamber cell culture well systems.

We present a simple method to actively pattern individual cells and groups of cells in a polymer-based microdevice using vacuum-assisted cell seeding. Soft lithography is used to mold polymer microwells with various geometries on top of commercially available porous membranes. Cell suspensions are placed in a vacuum filtration setup to pull culture medium through the microdevice, trapping the cells in the microwells. The process is evaluated by determining the number of cells per microwell for a given cell seeding density and microwell geometry. This method is tested with adherent and nonadherent cells (NIH 3T3 fibroblasts, PANC-1 pancreatic ductal epithelial-like cells, and THP-1 monocytic leukemia cells). These devices could find applications in high-throughput cell screening, cell transport studies, guided formation of cell clusters, and tissue engineering.

Plasticized polyvinyl chloride tubing is used as the blood conduit in the heart lung bypass circuit. The section in the roller pump undergoes rigorous compression. Fatigue leads to material changes in weight and length of the bulk material. Particles are released during normal pump operation. This study evaluates the time course of particle loss. Three segments of 1/2" ID tubing run in the raceway for 30-minute, 1-hour, or 2-hour. The fluid path of each segment includes an oxygenator; a castor oil blend was used for the prime. The 5 mL sample was acquired at 10 minute intervals. Raceway tubing segments were measured for a change in weight and length. The same procedure repeated with 1/4" ID and 3/8" ID tubing. All tubing increased at least 5 mm by the 2-hour trial. There were no remarkable changes in weight. Particles were measured for size and percent volume. Tubing with 1/2" ID performed most consistently for particle release during all trials. Particles were observed as small as 1 nm. Particles as large as 3 micron could be confirmed. For all tubing there was particle release by 30 minutes. Perfusionists must consider tubing inner diameter and wall thickness in choosing the pPVC for the raceway in order to minimize particulate emboli. This research suggests that 3/8" ID tubing produces spalls inconsistently compared to 2" ID tubing. Thinner wall thickness tubing also has the potential to limit spall formation.

Large and well-defined arrays of both nanowires and micro/nanoparticles or only micro/nanoparticles are fabricated from aqueous solutions through a one-step dewetting process on an array of polydimethylsiloxane (PDMS) micropillars.

A sub-dural surface microelectrode array designed to detect micro-field evoked potentials has been developed. The device is comprised of an array of 350-microm square gold contacts, with bidirectional spacing of 150 microm, contained within a polyimide Kapton material. Cytotoxicity testing suggests that the device is suitable for use with animal and human patients. Implementation of the device in animal studies revealed that reliable evoked potentials could be acquired. Further work will be needed to determine how these micro-field potentials, which demonstrate selectivity for one eye, relate to the distribution of the ocular dominance columns of the occipital cortex.

Soft lithographic techniques were used to fabricate polymeric microparticles for drug delivery applications. The microparticles were made of thermoplastics and thermosets from different types of precursors including reactive resin and polymer solutions in organic solvents or water. The microparticles produced using these methods were made of widely used polymers for drug delivery with highly uniform sizes, plate-like morphology, and well-defined lateral sizes and shapes, making them potentially useful for drug delivery applications and as platform for the construction of multi-functional drug delivery devices.

This letter describes the fabrication of three-dimensional particulate-like hydrogel microstructures using a combination of soft lithography and volume expansion induced self-folding. Bilayer structures are produced by solvent casting and photocuring of liquid resins. They curl into three-dimensional (3D) structures upon contacting with water due to differential swelling of the two layers. The curvature can be controlled by adjusting the polymer composition of the primary swelling layer. A simple semiempirical mathematical model is used to predict this self-folding behavior. By designing the two-dimensional (2D) shapes of the bilayers, this technique can lead to complicated 3D microstructures.

In this work, the effect of multivalent ions on electroosmotic flow is investigated for multiple electrolyte components. The cases studied include incorporating Ca2+ and HPO4(2-) and other monovalent ions, such as K+ and H2PO4-, into an aqueous NaCl solution. The governing equations are derived and solved numerically. The boundary conditions for the governing equations are obtained from the electrochemical equilibrium requirements. In comparison with monovalent ions, the results show that in micro- and nanochannels having fixed surface charges, multivalent counterions, even in very small amounts, reduce electroosmotic flow significantly, while the multivalent co-ions have little effect on the electroosmotic flow. Due to the enhanced ion-wall interactions multivalent counterions compose the majority of ions in the electric double layer (EDL), causing a decrease of net charge at the surface.

As a novel therapeutic application of microfabrication technology, a micromachined membrane-based biocapsule is described for the transplantation of protein-secreting cells without the need for immunosuppression. This new approach to cell encapsulation is based on microfabrication technology whereby immunoisolation membranes are bulk and surface micromachined to present uniform and well-controlled pore sizes as small as 10 nm, tailored surface chemistries, and precise microarchitecture. Through its ability to achieve highly controlled microarchitectures on size scales relevant to living systems (from microm to nm), microfabrication technology offers unique opportunities to more precisely engineer biocapsules that allow free exchange of the nutrients, waste products, and secreted therapeutic proteins between the host (patient) and implanted cells, but exclude lymphocytes and antibodies that may attack foreign cells. Microfabricated inorganic encapsulation devices may provide biocompatibility, in vivo chemical and mechanical stability, tailored pore geometries, and superior immunoisolation for encapsulated cells over conventional encapsulation approaches. By using microfabrication techniques, structures can be fabricated with spatial features from the sub-micron range up to several millimeters. These multi-scale structures correspond well with hierarchical biological structures, from proteins and sub-cellular organelles to the tissue and organ levels.

The ability to create biocompatible well-controlled membranes has been an area of great interest over the last few years, particularly for biosensor applications. The present study describes the fabrication and characterization of novel nanoporous micromachined membranes that exhibit selective permeability and low biofouling. Results indicate that such membranes can be fabricated with uniform pore sizes capable of the simultaneous exclusion of albumin and diffusion of glucose. Compared to polymeric membranes of similar pore size, micromachined silicon membranes allowed more than twice the amount of glucose diffusion after 240 min and complete albumin exclusion. Moreover, membranes exhibit no morphological change or degradability in the presence of biological proteins and fluids at 37 degrees C. The results point to the potential of using such membranes for implantable biosensor applications. With monodisperse pores sizes as small as 10 nm, these membranes offer advantages in their reproducibility, stability, and ability to be integrated in silicon-based biosensing technology.