Search

The physical structure of the firn column directly influences the transport and storage of infiltrating water generated by surface melt in ice sheet accumulation zones. Firn density is relatively easy to measure in field or laboratory settings and provides porosity-based estimates of the meltwater storage capacity but does not describe meltwater movement through open pore space. Pore structure controls meltwater flow and is better characterized by microstructural parameters, such as grain size. Firn grain size is therefore a state variable that needs to be accurately modeled or measured to quantify meltwater transport and storage in the firn column. Manually or digitally measuring grain size from firn samples can be tedious, time consuming, and subjective. Here, we characterize firn structure from 14 firn cores spanning approximately 1000 km across western Greenland’s percolation zone. We scanned the top 10 m of each core with a near infrared hyperspectral imager (NIR-HSI; 900-1700 nm) mounted on a linear translation stage. Leveraging the relationship between ice grain size and near infrared absorption, we invert measured reflectance to retrieve an effective grain radius, resulting in a high-resolution (~ 0.4 mm) grain size map of the firn core. We compare the retrievals against traditional grain size measurements from 7 of the cores. Additionally, the hyperspectral firn core grain size maps allow for quickly retrieving vertical ice layer distributions within the firn column and identifying regions that have been previously wetted that are not readily apparent by visual inspection. We use our unique dataset to examine correlations between grain size, infiltration ice content, and measured firn density to determine whether microstructural information can be extracted from firn density measurements. While cores provide a snapshot of firn conditions at the time of collection, we show that hyperspectral imaging of firn cores can reveal a detailed hydrologic history of the firn column and provide validation data for modeling future meltwater percolation.

Measuring snow from space is still a significant challenge in hydrology. Work by Lievens et al. (2019) for the first time showed the potential of the Sentinel-1 C-band radar mission to measure snow depth from space. However, the physical interactions between snow grains and the comparatively long C-band waves are not sufficiently understood. To improve this understanding, a tower based C-band radar experiment was set up in Idaho’s Rocky mountains starting from January 2020. The ultra-wideband radar system recorded the reflections in the time-domain, allowing to study the return throughout the different layers of the snowpack at a fine resolution. Reference data of the stratigraphy and snow properties were collected during ~weekly site visits. Our results indicate that some volume scattering is present at C-band for dry snow, and that the backscatter return increases substantially after melt-freeze cycles and with the appearance of ice features within the snowpack.

Snow is a critical water resource for the western United States and many regions across the globe. However, our ability to accurately measure and monitor changes in snow mass from satellite remote sensing, specifically its water equivalent, remains a challenge. To confront these challenges, NASA initiated the SnowEx program, a multiyear effort to address knowledge gaps in snow remote sensing. During SnowEx 2020, the Uninhabited Aerial Vehicle Synthetic Aperture Radar (UAVSAR) team acquired an L-band interferometric synthetic aperture radar (InSAR) data time series to evaluate the capabilities and limitations of repeat-pass L-band InSAR for tracking changes in snow water equivalent (SWE). The goal was to develop a more comprehensive understanding of where and when L-band InSAR can provide SWE change estimates, allowing the snow community to leverage the upcoming NASA–ISRO (NASA–Indian Space Research Organization) SAR (NISAR) mission. Our study analyzed three InSAR image pairs from the Jemez Mountains, NM, between 12 and 26 February 2020. We developed a snow-focused multi-sensor method that uses UAVSAR InSAR data synergistically with optical fractional snow-covered area (fSCA) information. Combining these two remote sensing datasets allows for atmospheric correction and delineation of snow-covered pixels within the radar swath. For all InSAR pairs, we converted phase change values to SWE change estimates between the three acquisition dates. We then evaluated InSAR-derived retrievals using a combination of fSCA, snow pits, meteorological station data, in situ snow depth sensors, and ground-penetrating radar (GPR). The results of this study show that repeat-pass L-band InSAR is effective for estimating both snow accumulation and ablation with the proper measurement timing, reference phase, and snowpack conditions.

Changes in the calving front position of marine-terminating glaciers strongly influence the mass balance of glaciers, ice caps, and ice sheets. At present, quantification of frontal position change primarily relies on time-consuming and subjective manual mapping techniques, limiting our ability to understand changes to glacier calving fronts. Here we describe a newly developed automated method of mapping glacier calving fronts in satellite imagery using observations from a representative sample of Greenland’s peripheral marine-terminating glaciers. Our method is adapted from the 2-D wavelet transform modulus maxima (WTMM) segmentation method, which has been used previously for image segmentation in biomedical and other applied science fields. The gradient-based method places edge detection lines along regions with the greatest intensity gradient in the image, such as the contrast between glacier ice and water or glacier ice and sea ice. The lines corresponding to the calving front are identified using thresholds for length, average gradient value, and orientation that minimize the misfit with respect to a manual validation data set. We demonstrate that the method is capable of mapping glacier calving fronts over a wide range of image conditions (light to intermediate cloud cover, dim or bright, melange presence, etc.). With these time series, we are able to resolve subseasonal to multiyear temporal patterns as well as regional patterns in glacier frontal position change.

Snow is a critical water resource for the western US and many regions across the globe. However, our ability to accurately measure and monitor changes in snow mass from satellite remote sensing, specifically its water equivalent, remains a challenge in mountain regions. To confront these challenges, NASA initiated the SnowEx program, a multi-year effort to address knowledge gaps in snow remote sensing. During SnowEx 2020, the UAVSAR team acquired an L-band Interferometric Synthetic Aperture Radar (InSAR) data time series to evaluate the capabilities and limitations of repeat-pass L-band InSAR data for tracking changes in snow water equivalent (SWE). The goal was to develop a more comprehensive understanding of where and when L-band InSAR can provide snow mass change estimates, allowing the snow community to leverage the upcoming NASA-ISRO SAR (NISAR) mission. Our study analyzed three InSAR image pairs from the Jemez River Basin, NM, between 12–26 February 2020. We developed an end-to-end UAVSAR InSAR processing workflow for snow applications. This open-source approach employs a novel data fusion method that merges optical snow covered area (SCA) information with InSAR data. Combining these two remote sensing datasets allows for atmospheric correction and delineation of snow covered pixels. For all InSAR pairs, we converted phase change values to SWE change estimates between the three data acquisition dates. We then evaluated InSAR-derived retrievals using a combination of optical snow cover data, snow pits, meteorological station data, in situ snow depth sensors, and ground-penetrating radar (GPR). The results of this study show that repeat-pass L-band InSAR is effective for estimating both snow accumulation and ablation with the proper measurement timing, reference phase, and snowpack conditions.

Seasonal snow cover is the largest single component of the cryosphere in areal extent, covering an average of 46 × 106 km2 of Earth's surface (31 % of the land area) each year, and is thus an important expression and driver of the Earth's climate. In recent years, Northern Hemisphere spring snow cover has been declining at about the same rate (∼ −13 % per decade) as Arctic summer sea ice. More than one-sixth of the world's population relies on seasonal snowpack and glaciers for a water supply that is likely to decrease this century. Snow is also a critical component of Earth's cold regions' ecosystems, in which wildlife, vegetation, and snow are strongly interconnected. Snow water equivalent (SWE) describes the quantity of water stored as snow on the land surface and is of fundamental importance to water, energy, and geochemical cycles. Quality global SWE estimates are lacking. Given the vast seasonal extent combined with the spatially variable nature of snow distribution at regional and local scales, surface observations are not able to provide sufficient SWE information. Satellite observations presently cannot provide SWE information at the spatial and temporal resolutions required to address science and high-socio-economic-value applications such as water resource management and streamflow forecasting. In this paper, we review the potential contribution of X- and Ku-band synthetic aperture radar (SAR) for global monitoring of SWE. SAR can image the surface during both day and night regardless of cloud cover, allowing high-frequency revisit at high spatial resolution as demonstrated by missions such as Sentinel-1. The physical basis for estimating SWE from X- and Ku-band radar measurements at local scales is volume scattering by millimeter-scale snow grains. Inference of global snow properties from SAR requires an interdisciplinary approach based on field observations of snow microstructure, physical snow modeling, electromagnetic theory, and retrieval strategies over a range of scales. New field measurement capabilities have enabled significant advances in understanding snow microstructure such as grain size, density, and layering. We describe radar interactions with snow-covered landscapes, the small but rapidly growing number of field datasets used to evaluate retrieval algorithms, the characterization of snowpack properties using radar measurements, and the refinement of retrieval algorithms via synergy with other microwave remote sensing approaches. This review serves to inform the broader snow research, monitoring, and application communities on progress made in recent decades and sets the stage for a new era in SWE remote sensing from SAR measurements.

The European Space Agency SnowSAR instrument is a side-looking, dual-polarised (VV/VH), X/Ku band synthetic aperture radar (SAR), operable from various sizes of aircraft. Between 2010 and 2013, the instrument was deployed at several sites in Northern Finland, Austrian Alps and northern Canada. The purpose of the airborne campaigns was to measure the backscattering properties of snow-covered terrain to support the development of snow water equivalent retrieval techniques using SAR. SnowSAR was deployed in Sodankylä, Northern Finland, for a single flight mission in March 2011 and 12 missions at two sites (tundra and boreal forest) in the winter of 2011–2012. Over the Austrian Alps, three flight missions were performed between November 2012 and February 2013 over three sites located in different elevation zones representing a montane valley, Alpine tundra and a glacier environment. In Canada, a total of two missions were flown in March and April 2013 over sites in the Trail Valley Creek watershed, Northwest Territories, representative of the tundra snow regime. This paper introduces the airborne SAR data and coincident in situ information on land cover, vegetation and snow properties. To facilitate easy access to the data record, the datasets described here are deposited in a permanent data repository (https://doi.org/10.1594/PANGAEA.933255, Lemmetyinen et al., 2021).

The European Space Agency SnowSAR instrument is a side looking, dual polarized (VV/VH), X/Ku band synthetic aperture radar (SAR), operable from a small aircraft. Between 2010 and 2013, the instrument was deployed at several sites in Northern Finland, Austrian Alps, and northern Canada. The purpose of the airborne campaigns was to measure the backscattering properties of snow-covered terrain to support the development of snow water equivalent retrieval techniques using SAR. SnowSAR was deployed in Sodankylä, Northern Finland for a single flight mission in March 2011 and twelve missions at two sites (tundra and boreal forest) in the winter of 2011–2012. Over the Austrian Alps, three flight missions were performed between November 2012 and February 2013 over three sites located in different elevation zones, representing a montane valley, Alpine tundra, and a glacier environment. In Canada, a total of two missions were flown in March and April 2013, over sites in the Trail Valley Creek watershed, Northwest Territories, representative of the tundra snow regime. This paper introduces the airborne SAR data, as well as coincident in situ information on land cover, vegetation and snow properties. To facilitate easy access to the data record the datasets described here are deposited in a permanent data repository (https://doi.pangaea.de/10.1594/PANGAEA.933255; Lemmetyinen et al., 2021). A temporary link to access the data without login information is provided for reviewers of this manuscript: https://www.pangaea.de/tok/e8c562c3c8a15ac34daa83d00c76fcb347330884.

We present continuous estimates of snow and firn density, layer depth and accumulation from a multi-channel, multi-offset, ground-penetrating radar traverse. Our method uses the electromagnetic velocity, estimated from waveform travel-times measured at common-midpoints between sources and receivers. Previously, common-midpoint radar experiments on ice sheets have been limited to point observations. We completed radar velocity analysis in the upper ~2 m to estimate the surface and average snow density of the Greenland Ice Sheet. We parameterized the Herron and Langway (1980) firn density and age model using the radar-derived snow density, radar-derived surface mass balance (2015–2017) and reanalysis-derived temperature data. We applied structure-oriented filtering to the radar image along constant age horizons and increased the depth at which horizons could be reliably interpreted. We reconstructed the historical instantaneous surface mass balance, which we averaged into annual and multidecadal products along a 78 km traverse for the period 1984–2017. We found good agreement between our physically constrained parameterization and a firn core collected from the dry snow accumulation zone, and gained insights into the spatial correlation of surface snow density.

Global snow water equivalent (SWE) data are required for understanding the role of snow in the Earth’s water, energy and carbon cycles, and are critical for informing water resource and snow-related hazards. While exciting progress has been made in recent decades, there are currently no global SWE data at the required frequency, resolution and accuracy to address scientific and operational requirements. These data are needed to inform science and application areas and, taken as a whole, are critical to global water and food security. New higher-resolution microwave instruments can provide this information, especially when combined with modeling. We now have the capability to put these instruments in space to monitor SWE and volume at the required resolution for improved and useful water prediction globally. This presentation will describe the requirements of a spaceborne SWE mission, review progress in snow remote sensing technology and algorithms, and describe a potential path forward to meet identified snow data needs.

Seasonal snow is an essential water resource in many mountain regions. However, the spatio-temporal variability in mountain snow depth or snow water equivalent (SWE) at regional to global scales is not well understood due to the lack of high-resolution satellite observations and robust retrieval algorithms. We investigate the ability of the Sentinel-1 mission to monitor snow depth at sub-kilometer (100 m, 500 m, and 1 km) resolutions over the European Alps for 2017–2019. The Sentinel-1 backscatter observations, especially in cross-polarization, show a high correlation with regional model simulations of snow depth over Austria and Switzerland. The observed changes in radar backscatter with the accumulation or ablation of snow are used in an empirical change detection algorithm to retrieve snow depth. The algorithm includes the detection of dry and wet snow conditions. Compared to in situ measurements at 743 sites in the European Alps, dry snow depth retrievals at 500 m and 1 km resolution have a spatio-temporal correlation of 0.89. The mean absolute error equals 20 %–30 % of the measured values for snow depths between 1.5 and 3 m. The performance slightly degrades for retrievals at the finer 100 m spatial resolution as well as for retrievals of shallower and deeper snow. The results demonstrate the ability of Sentinel-1 to provide snow estimates in mountainous regions where satellite-based estimates of snow mass are currently lacking. The retrievals can improve our knowledge of seasonal snow mass in areas with complex topography and benefit a number of applications, such as water resource management, flood forecasting, and numerical weather prediction. However, future research is recommended to further investigate the physical basis of the sensitivity of Sentinel-1 backscatter observations to snow accumulation.

Extensive efforts have been made to observe the accumulation and melting of seasonal snow. However, making accurate observations of snow water equivalent (SWE) at global scales is challenging. Active radar systems show promise, provided the dielectric properties of the snowpack are accurately constrained. The dielectric constant (k) determines the velocity of a radar wave through snow, which is a critical component of time-of-flight radar techniques such as ground penetrating radar and interferometric synthetic aperture radar (InSAR). However, equations used to estimate k have been validated only for specific conditions with limited in situ validation for seasonal snow applications. The goal of this work was to further understand the dielectric permittivity of seasonal snow under both dry and wet conditions. We utilized extensive direct field observations of k, along with corresponding snow density and liquid water content (LWC) measurements. Data were collected in the Jemez Mountains, NM; Sandia Mountains, NM; Grand Mesa, CO; and Cameron Pass, CO from February 2020 to May 2021. We present empirical relationships based on 146 snow pits for dry snow conditions and 92 independent LWC observations in naturally melting snowpacks. Regression results had r2 values of 0.57 and 0.37 for dry and wet snow conditions, respectively. Our results in dry snow showed large differences between our in situ observations and commonly applied equations. We attribute these differences to assumptions in the shape of the snow grains that may not hold true for seasonal snow applications. Different assumptions, and thus different equations, may be necessary for varying snowpack conditions in different climates, suggesting that further testing is necessary. When considering wet snow, large differences were found between commonly applied equations and our in situ measurements. Many previous equations assume a background (dry snow) k that we found to be inaccurate, as previously stated, and is the primary driver of resulting uncertainty. Our results suggest large errors in SWE (10–15%) or LWC (0.05–0.07 volumetric LWC) estimates based on current equations. The work presented here could prove useful for making accurate observations of changes in SWE using future InSAR opportunities such as NISAR and ROSE-L.

Seasonal snow cover is the largest single component of the cryosphere in areal extent, covering an average of 46 million square km of Earth's surface (31 % of the land area) each year, and is thus an important expression of and driver of the Earth’s climate. In recent years, Northern Hemisphere spring snow cover has been declining at about the same rate (~ −13 %/decade) as Arctic summer sea ice. More than one-sixth of the world’s population relies on seasonal snowpack and glaciers for a water supply that is likely to decrease this century. Snow is also a critical component of Earth’s cold regions' ecosystems, in which wildlife, vegetation, and snow are strongly interconnected. Snow water equivalent (SWE) describes the quantity of snow stored on the land surface and is of fundamental importance to water, energy, and geochemical cycles. Quality global SWE estimates are lacking. Given the vast seasonal extent combined with the spatially variable nature of snow distribution at regional and local scales, surface observations will not be able to provide sufficient SWE information. Satellite observations presently cannot provide SWE information at the spatial and temporal resolutions required to address science and high socio-economic value applications such as water resource management and streamflow forecasting. In this paper, we review the potential contribution of X- and Ku-Band Synthetic Aperture Radar (SAR) for global monitoring of SWE. We describe radar interactions with snow-covered landscapes, characterization of snowpack properties using radar measurements, and refinement of retrieval algorithms via synergy with other microwave remote sensing approaches. SAR can image the surface during both day and night regardless of cloud cover, allowing high-frequency revisit at high spatial resolution as demonstrated by missions such as Sentinel-1. The physical basis for estimating SWE from X- and Ku-band radar measurements at local scales is volume scattering by millimetre-scale snow grains. Inference of global snow properties from SAR requires an interdisciplinary approach based on field observations of snow microstructure, physical snow modelling, electromagnetic theory, and retrieval strategies over a range of scales. New field measurement capabilities have enabled significant advances in understanding snow microstructure such as grain size, densities, and layering. We describe radar interactions with snow-covered landscapes, the characterization of snowpack properties using radar measurements, and the refinement of retrieval algorithms via synergy with other microwave remote sensing approaches. This review serves to inform the broader snow research, monitoring, and applications communities on progress made in recent decades, and sets the stage for a new era in SWE remote-sensing from SAR measurements.

As part of the NASA SnowEx 2020 campaign, we performed a time series experiment with NASA's UAVSAR, an airborne L-band InSAR, over 13 sites across 5 states. Six flights were performed (December-March), capturing a wide range of snow conditions. On Grand Mesa, Colorado, two of the InSAR overflights were well aligned with two airborne lidar surveys. We show that in a 4 km2 wind exposed area on the west end of Grand Mesa, the measured change in phase can be used to estimate change in snow depth. In this region we observed both scouring and drifting, with a dynamic range of ± 20 cm. We use the measured surface density, change in phase, and local incidence angle to estimate change in snow depth over approximately a 2 week period, with a RMSD of 4.7cm depth, and 0.9cm SWE. This technique shows promise in open regions in dry snow conditions, and may be a useful component of a global snow satellite concept.

Seasonal snow is an essential source of water, especially in mountain regions. However, accurate satellite observations of the amount of snow stored in mountains are still lacking. We provide estimates of snow depth at sub-kilometer resolution over the European Alps for 2017–2019 from Sentinel-1 observations. The retrievals are based on a change detection algorithm that includes the masking of wet snow. For dry snow conditions, 300-m Sentinel-1 retrievals have a spatiotemporal correlation of 0.82 and mean absolute error of 0.19m compared with in situ measurements from 743 sites across the Alps. The results show the potential of Sentinel-1 to provide unprecedented snow estimates in regions with complex topography, where satellite observations of snow mass are currently lacking.

Accurate snow depth observations are critical to assess water resources. More than a billion people rely on water from snow, most of which originates in the Northern Hemisphere mountain ranges. Yet, remote sensing observations of mountain snow depth are still lacking at the large scale. Here, we show the ability of Sentinel-1 to map snow depth in the Northern Hemisphere mountains at 1 km² resolution using an empirical change detection approach. An evaluation with measurements from ~4000 sites and reanalysis data demonstrates that the Sentinel-1 retrievals capture the spatial variability between and within mountain ranges, as well as their inter-annual differences. This is showcased with the contrasting snow depths between 2017 and 2018 in the US Sierra Nevada and European Alps. With Sentinel-1 continuity ensured until 2030 and likely beyond, these findings lay a foundation for quantifying the long-term vulnerability of mountain snow-water resources to climate change., Remote sensing observations of mountain snow depth are still lacking for the Northern Hemisphere mountains. Here authors use Sentinel-1 satellite radar measurements to assess the snow depth in mountainous areas at 1 km² resolution and show that the Sentinel-1 retrievals capture the spatial variability between and within mountain ranges, as well as their inter-annual differences.