Search

Angiogenesis is necessary for wound healing, tumorigenesis, implant inosculation, and homeostasis. In each situation, matrix structure and mechanics play a role in determining whether new vasculatures can establish transport to new or hypoxic tissues. Neovessel growth and directional guidance are sensitive to three-dimensional (3-D) matrix anisotropy and density, although the individual and integrated roles of these matrix features have not been fully recapitulated in vitro. We developed a tension-based method to align 3-D collagen constructs seeded with microvessel fragments in matrices of three levels of collagen fibril anisotropy and two levels of collagen density. The extent and direction of neovessel growth from the parent microvessel fragments increased with matrix anisotropy and decreased with density. The proangiogenic effects of anisotropy were attenuated at higher matrix densities. We also examined the impact of matrix anisotropy in an experimental model of neovessel invasion across a tissue interface. Matrix density was found to dictate the success of interface crossing, whereas interface curvature and fibril alignment were found to control directional guidance. Our findings indicate that complex configurations of matrix density and alignment can facilitate or complicate the establishment or maintenance of vascular networks in pathological and homeostatic angiogenesis. Furthermore, we extend preexisting methods for tuning collagen anisotropy in thick constructs. This approach addresses gaps in tissue engineering and cell culture by supporting the inclusion of large multicellular structures in prealigned constructs. NEW & NOTEWORTHY Matrix anisotropy and density have a considerable effect on angiogenic vessel growth and directional guidance. However, the current literature relies on 2-D and simplified models of angiogenesis (e.g., tubulogenesis and vasculogenesis). We present a method to align 3-D collagen scaffolds embedded with microvessel fragments to different levels of anisotropy. Neovessel growth increases with anisotropy and decreases with density, which may guide angiogenic neovessels across tissue interfaces such as during implant inosculation and tumorigenesis.

Predicting the evolution of virus host range has proven to be extremely difficult, in part because of the sheer diversity of viruses, each with unique biology and ecological interactions. We have not solved this problem, but to make the problem more tractable, we narrowed our focus to three traits intrinsic to all viruses that may play a role in host-range evolvability: mutation rate, recombination rate, and phenotypic heterogeneity. Although each trait should increase evolvability, they cannot do so unbounded because fitness trade-offs limit the ability of all three traits to maximize evolvability. By examining these constraints, we can begin to identify groups of viruses with suites of traits that make them especially concerning, as well as ecological and environmental conditions that might push evolution toward accelerating host-range expansion.

Angiogenesis, the formation of new vessel elements from existing vessels, is important in homeostasis and tissue repair. Dysfunctional angiogenesis can contribute to numerous pathologies, including cancer, ischemia, and chronic wounds. In many instances, growing vessels must navigate along or across tissue-associated boundaries and interfaces tissue interfaces. To understand this dynamic, we developed a new model for studying angiogenesis at tissue interfaces utilizing intact microvessel fragments isolated from adipose tissue. Isolated microvessels retain their native structural and cellular complexity. When embedded in a 3D matrix, microvessels, sprout, grow, and connect to form a neovasculature. Here, we discuss and describe methodology for one application of our microvessel-based angiogenesis model, studying neovessel behavior at tissue interfaces.

Tissue organoids or "mini organs" can be invaluable tools for understanding health and disease biology, modeling tissue dynamics, or screening potential drug candidates. Effective vascularization of these models is critical for truly representing the in vivo tissue environment. Not only is the formation of a vascular network, and ultimately a microcirculation, essential for proper distribution and exchange of oxygen and nutrients throughout larger organoids, but vascular cells dynamically communicate with other cells to modulate overall tissue behavior. Additionally, interstitial fluid flow, mediated by a perfused microvasculature, can have profound influences on tissue biology. Thus, a truly functionally and biologically relevant organoid requires a vasculature. Here, we review existing strategies for fabricating and incorporating vascular elements and perfusion within tissue organoids.

An essential step toward commercializing engineered tissues is to scale-up and automate their production. This presents a challenge for self-assembled tissues that are fragile at early time points and difficult to handle using robotic systems. The goal of this study was to automate tissue-engineered blood vessel (TEBV) fabrication by creating a custom cell seeding and self-assembly system that is conducive to robotic manipulation, coupled with a robotic system to assemble smooth muscle cell ring units into tissue tubes. To generate self-assembled tissue ring units manually, cells are seeded at a high density into custom agarose wells that have center posts (2 mm inner diameter), around which cells aggregate and contract to form rings. Agarose is well-suited for cell seeding and ring self-assembly because it is noncell adhesive, can be autoclaved, and reproducibly cast to form wells using silicone templates. However, agarose gel is soft and makes reliable robotic manipulation challenging. To solve this problem, we designed a custom ring self-assembly plate utilizing polyetherimide (PEI) wells with MED610 three-dimensional-printed center posts and an MED610 well negative that allows the casting of individual, annular agarose cell-seeding troughs within the PEI plate. Rings cultured in the new plate system were morphologically similar to rings cultured in control agarose wells and had a slightly higher failure load. To automate tube assembly, we created a unique robotic punch system to push tissue rings out of the PEI-MED610 plate onto a stainless steel mandrel to enable tube fusion. Tubes fabricated by manual or robotic ring removal and placement demonstrated similar morphology after tube fusion, and the automated system substantially reduced the time required to assemble tubes. In summary, we developed a novel robotic assembly system to precisely manipulate self-assembled tissue rings and enable scale-up and automation of TEBV biofabrication. IMPACT STATEMENT: Self-assembled tissues have potential to serve both as implantable grafts and as tools for disease modeling and drug screening. For these applications, tissue production must ultimately be scaled-up and automated. Limited technologies exist for precisely manipulating self-assembled tissues, which are fragile early in culture. Here, we presented a method for automatically stacking self-assembled smooth muscle cell rings onto mandrels, using a custom-designed well plate and robotic punch system. Rings then fuse into tissue-engineered blood vessels (TEBVs). This is a critical step toward automating TEBV production that may be applied to other tubular tissues as well.

Tissue organoids are proving valuable for modeling tissue health and disease in a variety of applications. This is due, in part, to the dynamic cell–cell interactions fostered within the 3D tissue-like space. To this end, the more that organoids recapitulate the different cell–cell interactions found in native tissue, such as that between parenchyma and the microvasculature, the better the fidelity of the model. The microvasculature, which is comprised of a spectrum of cell types, provides not only perfusion in its support of tissue health, but also important cellular interactions and biochemical dynamics important in tissue phenotype and function. Here, we incorporate whole, intact human microvessel fragments isolated from adipose tissue into organoids to form both mesenchymal stem cell (MSC) and adipocyte vascularized organoids. Isolated microvessels retain their native structure and cell composition, providing a more complete representation of the microvasculature within the organoids. Microvessels expanded via sprouting angiogenesis within organoids comprised of either MSCs or MSC-derived adipocytes grew out of the organoids when placed in a 3D collagen matrix. In MSC organoids, a ratio of 50 MSCs to 1 microvessel fragment created the optimal vascularization response. We developed a new differentiation protocol that enabled the differentiation of MSCs into adipocytes while simultaneously promoting microvessel angiogenesis. The adipocyte organoids contained vascular networks, were responsive in a lipolysis assay, and expressed the functional adipocyte markers adiponectin and peroxisome proliferator-activated receptor gamma. The presence of microvessels promoted insulin receptor expression by adipocytes and modified interleukin-6 secretion following a tumor necrosis factor alpha challenge. Overall, we demonstrate a robust method for vascularizing high cell-density organoids with potential implications for other tissues as well.

Sewing cuffs incorporated within tissue-engineered blood vessels (TEBVs) enable graft anastomosis in vivo, and secure TEBVs to bioreactors in vitro. Alternative approaches to cuff design are required to achieve cuff integration with scaffold-free TEBVs during tissue maturation. To create porous materials that promote tissue integration, we used electrospinning to fabricate cuffs from polycaprolactone (PCL), PCL blended with gelatin, and PCL coated with gelatin, and evaluated cuff mechanical properties, porosity, and cellular attachment and infiltration. Gelatin blending significantly decreased cuff ultimate tensile stress and failure strain over PCL alone, but no significant differences were observed in elastic modulus or failure load. Interestingly, gelatin incorporation by blending or coating did not produce significant differences in cellular attachment or pore size. We then created tissue tubes by fusing self-assembled smooth muscle cell rings together with electrospun cuffs on either end. After 7 days, rings and cuffs fused seamlessly, and the resulting tubes were harvested for pull-to-failure tests to measure the strength of cuff-tissue integration. Tubes with gelatin-coated PCL cuffs failed more frequently at the cuff-tissue interface compared to PCL and PCL:gelatin blended groups. This work demonstrates that electrospun cuffs integrated successfully with scaffold-free TEBVs, and that the addition of gelatin did not significantly improve cuff integration over PCL alone for this application. Electrospun cuffs may aid cannulation for dynamic culture and testing of tubular constructs during engineered tissue maturation. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 106B: 817-826, 2018.

Realization of the full potential of tissue and organ fabrication, for either tissue modeling or regenerative medicine applications, requires solutions enabling perfusion of the tissue bed to overcome fundamental limitations of diffusion. While there are many challenges related to perfusing a fabricated tissue, establishing a perfusion system scaled to the cellular level remains critically important. Numerous strategies involving a variety of fabrication methods compatible with living systems have emerged to address this challenge, many of which can be classified into two general categories: engineering of channel networks and fabrication of native-like microvasculatures. Regardless of the approach taken, understanding the basis of tissue perfusion via the microvasculature in native tissues is invaluable in guiding the fabrication process. While these approaches have brought us much closer to meeting these challenges, there remains a need for further innovative solutions involving materials, tissue biology, biofabrication (including design and make strategies), and imaging and more to effectively fabricate human-scale, functional, vascularized tissues and organs.

Remarkably few attempts have been made to estimate contemporary effective population size (Ne) for parasitic species, despite the valuable perspectives it can offer on the tempo and pace of parasite evolution as well as coevolutionary dynamics of host–parasite interactions. In this study, we utilized multi-locus microsatellite data to derive single-sample and temporal estimates of contemporaryNefor a cestode parasite (Schistocephalus solidus) as well as three-spined stickleback hosts (Gasterosteus aculeatus) in lakes across Alaska. Consistent with prior studies, both approaches recovered small and highly variable estimates of parasite and hostNe. We also found that estimates of hostNeand parasiteNewere sensitive to assumptions about population genetic structure and connectivity. And, while prior work on the stickleback–cestode system indicates that physiographic factors external to stickleback hosts largely govern genetic variation inS. solidus, our findings indicate that stickleback host attributes and factors internal to the host – namely body length, genetic diversity and infection – shape contemporaryNeof cestode parasites.

Comparative studies of genetic diversity and population structure can shed light on the ecological and evolutionary factors that influence host–parasite interactions. Here we examined whether geography, time and genetic variation in Alaskan three-spined stickleback (Gasterosteus aculeatus Linneaus) hosts shape the population genetic structure of the diphyllobothridean cestode parasite Schistocephalus solidus (Muller, 1776). Host lineages and haplotypes were identified by sequencing the mitochondrial cytochrome b gene, and host population structure was assessed by Bayesian clustering analysis of allelic variation at 11 microsatellite loci. Parasite population structure was characterized according to allelic variation at eight microsatellite loci. Mantel tests and canonical redundancy analysis were conducted to evaluate the proportion of parasite genetic variation attributable to time and geography vs. host lineage, haplotype, and genotypic cluster. Host and parasite population structure were largely discordant across the study area, probably reflecting differences in gene flow, environmental influences external to the host, and genomic admixture among host lineages. We found that geography explained the greatest proportion of parasite genetic variation, but that variation also reflects time, host lineage, and host haplotype. Associations with host haplotypes suggest that one parasite genotypic cluster exhibits a narrower host range, predominantly infecting the most common host haplotypes, whereas the other parasite cluster infects all haplotypes equally, including rare haplotypes. Although experimental infection trials might prove otherwise, distributional differences in hosts preferentially infected by S. solidus could underlie the observed pattern of population structure.

Cardiovascular diseases are the leading cause of death in the United States. Treatment often requires surgical interventions to re-open occluded vessels, bypass severe occlusions, or stabilize aneurysms. Despite the short-term success of such interventions, many ultimately fail due to thrombosis or restenosis (following stent placement), or incomplete healing (such as after aneurysm coil placement). Bioactive molecules capable of modulating host tissue responses and preventing these complications have been identified, but systemic delivery is often harmful or ineffective. This review discusses the use of localized bioactive molecule delivery methods to enhance the long-term success of vascular interventions, such as drug-eluting stents and aneurysm coils, as well as nanoparticles for targeted molecule delivery. Vascular grafts in particular have poor patency in small diameter, high flow applications, such as coronary artery bypass grafting (CABG). Grafts fabricated from a variety of approaches may benefit from bioactive molecule incorporation to improve patency. Tissue engineering is an especially promising approach for vascular graft fabrication that may be conducive to incorporation of drugs or growth factors. Overall, localized and targeted delivery of bioactive molecules has shown promise for improving the outcomes of vascular interventions, with technologies such as drug-eluting stents showing excellent clinical success. However, many targeted vascular drug delivery systems have yet to reach the clinic. There is still a need to better optimize bioactive molecule release kinetics and identify synergistic biomolecule combinations before the clinical impact of these technologies can be realized.

In article number https://doi.org/10.1002/advs.201700402, Eben Alsberg and co‐workers report the engineering of tri‐tissue tracheas using a scaffold‐free approach that allows for the integration of structural cartilage rings, prevascular blood vessel networks, and epithelial cells into a single construct. Neotracheas of various dimensions, including human size, are formed via cellular self‐assembly. Prevascular tracheas are subcutaneously implanted into mice and demonstrate anastamosis with and perfusion by host vasculature.

Engineered tissues are being used clinically for tissue repair and replacement, and are being developed as tools for drug screening and human disease modeling. Self-assembled tissues offer advantages over scaffold-based tissue engineering, such as enhanced matrix deposition, strength, and function. However, there are few available methods for fabricating 3D tissues without seeding cells on or within a supporting scaffold. Previously, we developed a system for fabricating self-assembled tissue rings by seeding cells into non-adhesive agarose wells. A polydimethylsiloxane (PDMS) negative was first cast in a machined polycarbonate mold, and then agarose was gelled in the PDMS negative to create ring-shaped cell seeding wells. However, the versatility of this approach was limited by the resolution of the tools available for machining the polycarbonate mold. Here, we demonstrate that 3D-printed plastic can be used as an alternative to machined polycarbonate for fabricating PDMS negatives. The 3D-printed mold and revised mold design is simpler to use, inexpensive to produce, and requires significantly less agarose and PDMS per cell seeding well. We have demonstrated that the resulting agarose wells can be used to create self-assembled tissue rings with customized diameters from a variety of different cell types. Rings can then be used for mechanical, functional, and histological analysis, or for fabricating larger and more complex tubular tissues.

Tissue-engineered human blood vessels may enable in vitro disease modeling and drug screening to accelerate advances in vascular medicine. Existing methods for tissue-engineered blood vessel (TEBV) fabrication create homogenous tubes not conducive to modeling the focal pathologies characteristic of certain vascular diseases. We developed a system for generating self-assembled human smooth muscle cell (SMC) ring units, which were fused together into TEBVs. The goal of this study was to assess the feasibility of modular assembly and fusion of ring building units to fabricate spatially controlled, heterogeneous tissue tubes. We first aimed to enhance fusion and reduce total culture time, and determined that reducing ring preculture duration improved tube fusion. Next, we incorporated electrospun polymer ring units onto tube ends as reinforced extensions, which allowed us to cannulate tubes after only 7 days of fusion, and culture tubes with luminal flow in a custom bioreactor. To create focal heterogeneities, we incorporated gelatin microspheres into select ring units during self-assembly, and fused these rings between ring units without microspheres. Cells within rings maintained their spatial position along tissue tubes after fusion. Because tubes fabricated from primary SMCs did not express contractile proteins, we also fabricated tubes from human mesenchymal stem cells, which expressed smooth muscle alpha actin and SM22-α. This work describes a platform approach for creating modular TEBVs with spatially defined structural heterogeneities, which may ultimately be applied to mimic focal diseases such as intimal hyperplasia or aneurysm.

Cellular self-assembly has been used to generate living tissue constructs as an alternative to seeding cells on or within exogenous scaffold materials. However, high cell and extracellular matrix density in self-assembled constructs may impede diffusion of growth factors during engineered tissue culture. In the present study, we assessed the feasibility of incorporating gelatin microspheres within vascular tissue rings during cellular self-assembly to achieve growth factor delivery. To assess microsphere incorporation and distribution within vascular tissue rings, gelatin microspheres were mixed with a suspension of human smooth muscle cells (SMCs) at 0, 0.2, or 0.6 mg per million cells and seeded into agarose wells to form self-assembled cell rings. Microspheres were distributed throughout the rings and were mostly degraded within 14 days in culture. Rings with microspheres were cultured in both SMC growth medium and differentiation medium, with no adverse effects on ring structure or mechanical properties. Incorporated gelatin microspheres loaded with transforming growth factor beta 1 stimulated smooth muscle contractile protein expression in tissue rings. These findings demonstrate that microsphere incorporation can be used as a delivery vehicle for growth factors within self-assembled vascular tissues.

Sewing cuffs incorporated within tissue-engineered blood vessels (TEBVs) enable graft anastomosis in vivo, and secure TEBVs to bioreactors in vitro. Alternative approaches to cuff design are required to achieve cuff integration with scaffold-free TEBVs during tissue maturation. To create porous materials that promote tissue integration, we used electrospinning to fabricate cuffs from polycaprolactone (PCL), PCL blended with gelatin, and PCL coated with gelatin, and evaluated cuff mechanical properties, porosity, and cellular attachment and infiltration. Gelatin blending significantly decreased cuff ultimate tensile stress and failure strain over PCL alone, but no significant differences were observed in elastic modulus or failure load. Interestingly, gelatin incorporation by blending or coating did not produce significant differences in cellular attachment or pore size. We then created tissue tubes by fusing self-assembled smooth muscle cell rings together with electrospun cuffs on either end. After 7 days, rings and cuffs fused seamlessly, and the resulting tubes were harvested for pull-to-failure tests to measure the strength of cuff-tissue integration. Tubes with gelatin-coated PCL cuffs failed more frequently at the cuff-tissue interface compared to PCL and PCL:gelatin blended groups. This work demonstrates that electrospun cuffs integrated successfully with scaffold-free TEBVs, and that the addition of gelatin did not significantly improve cuff integration over PCL alone for this application. Electrospun cuffs may aid cannulation for dynamic culture and testing of tubular constructs during engineered tissue maturation. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 106B: 817-826, 2018.

Currently, there are no synthetic or biologic materials suitable for long‐term treatment of large tracheal defects. A successful tracheal replacement must (1) have radial rigidity to prevent airway collapse during respiration, (2) contain an immunoprotective respiratory epithelium, and (3) integrate with the host vasculature to support epithelium viability. Herein, biopolymer microspheres are used to deliver chondrogenic growth factors to human mesenchymal stem cells (hMSCs) seeded in a custom mold that self‐assemble into cartilage rings, which can be fused into tubes. These rings and tubes can be fabricated with tunable wall thicknesses and lumen diameters with promising mechanical properties for airway collapse prevention. Epithelialized cartilage is developed by establishing a spatially defined composite tissue composed of human epithelial cells on the surface of an hMSC‐derived cartilage sheet. Prevascular rings comprised of human umbilical vein endothelial cells and hMSCs are fused with cartilage rings to form prevascular–cartilage composite tubes, which are then coated with human epithelial cells, forming a tri‐tissue construct. When prevascular– cartilage tubes are implanted subcutaneously in mice, the prevascular structures anastomose with host vasculature, demonstrated by their ability to be perfused. This microparticle–cell self‐assembly strategy is promising for engineering complex tissues such as a multi‐tissue composite trachea.

There is a critical need to engineer a neotrachea because currently there are no long-term treatments for tracheal stenoses affecting large portions of the airway. In this work, a modular tracheal tissue replacement strategy was developed. High-cell density, scaffold-free human mesenchymal stem cell-derived cartilaginous rings and tubes were successfully generated through employment of custom designed culture wells and a ring-to-tube assembly system. Furthermore, incorporation of transforming growth factor-β1-delivering gelatin microspheres into the engineered tissues enhanced chondrogenesis with regard to tissue size and matrix production and distribution in the ring- and tube-shaped constructs, as well as luminal rigidity of the tubes. Importantly, all engineered tissues had similar or improved biomechanical properties compared to rat tracheas, which suggests they could be transplanted into a small animal model for airway defects. The modular, bottom up approach used to grow stem cell-based cartilaginous tubes in this report is a promising platform to engineer complex organs (e.g., trachea), with control over tissue size and geometry, and has the potential to be used to generate autologous tissue implants for human clinical applications.