Search

Thermoelectric materials are widely used in refrigeration chips, thermal power generation, catalysis and other fields. Mg3Bi2-based thermoelectric material is one of the most promising thermoelectric materials. Herein, the Mg3Bi2-based samples were prepared by high temperature synthesis, and the influence of Mg/Sb content on the electrical transport properties and semi-conductivity/semi-metallicity of the materials has been studied. The results indicate that the efficiency of introducing electrons from excess Mg prepared by high temperature synthesis is lower than that introduced by ball milling, due to the high vapor pressure of Mg. The doping of Sb/Te at the Bi site would make it easier for the material to change from p-type conduction to n-type conduction. With the increase in Mg content, the semi-conductivity of the material becomes weaker, the semi-metallicity becomes stronger, and the corresponding conductivity increases. With the increase in Sb content, the samples exhibit the opposite changes. The highest power factor of ~1.98 mWm−1K−2 is obtained from the Mg3.55Bi1.27Sb0.7Te0.03 sample. [ABSTRACT FROM AUTHOR]

Titanium dioxide (TiO2) has a strong oxidation effect when absorbing ultraviolet light. Therefore, when TiO2 is used as a light stabilizer in polyvinyl chloride (PVC), it will cause the photodegradation of PVC. Herein, carbon quantum dots (CQDs) coated TiO2 composite (TiO2@CQDs) was prepared by a one‐step hydrothermal method. The prepared TiO2@CQDs were characterized by transmission electron microscopy (TEM), UV–Vis spectroscopy, X‐ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FTIR), and X‐ray diffraction (XRD). The photostability of PVC film containing TiO2@CQDs was investigated via photodegradation conductivity test, weight loss rate test, and ultraviolet aging test. Due to the down‐conversion effect of CQDs under ultraviolet light, its existence can alleviate the photoaging of PVC. In addition, the thermal stability of PVC containing TiO2@CQDs was studied by conductivity tests and oven thermal aging tests. The presence of CQDs significantly improved the thermal stability of PVC. Meanwhile, the HCl absorption capacity of CQDs could reach 30.8 mg/gcat. According to the DFT calculations, this high absorption capacity is attributed to the HCl immobilization effect via forming hydrogen bonds between HCl and the keto oxygen, carboxyl keto oxygen in CQDs. The hydroxyl group in CQDs could also combine ZnCl2 by forming a coordination bond. [ABSTRACT FROM AUTHOR]

Carbon quantum dots (CQDs) can be used to modify TiO2 to extend the light absorption threshold and enhance its photocatalytic efficiency. In this study, different amounts of CQDs modified TiO2 (CQDs-x/TiO2) were synthesized by a facile, mild, and environmental friendly hydrothermal method at a low temperature. The physicochemical properties were investigated by a variety of advanced characterization techniques. It was found that the anchoring of CQDs endowed the CQDs-x/TiO2 with a large specific surface area, which is beneficial to adsorb more organic pollutants and promote the rate of photocatalytic oxidation. The XRD results also showed that the in situ formation of CQDs on the surface of TiO2 made the crystallinity of TiO2 tend to be complete. Among these photocatalysts, CQDs-20/TiO2 showed the highest pollutant removal efficiency under visible light irradiations. The classical quenching tests revealed that the O2•−, •OH, and hole (h+) were the oxidizing species. Among them, h+ was the primary factor contributing to the degradation. The electrochemical tests showed that the anchoring of CQDs on TiO2 increased the photocurrent by about four times, as compared with the pure TiO2. In particular, the cyclic voltammetry results showed that the photo-generated electrons of CQDs were freer to transfer to TiO2 under visible light irradiations, promoting the separation of photo-generated electrons and holes. This study explains adequately why the CQDs/TiO2 system has a good photocatalytic degradation of organic compounds. Highlights: TiO2 modified by carbon quantum dots (CQDs/TiO2) was fabricated by a facile hydrothermal method with in situ CQDs formation. The anchoring of CQDs improves the crystallinity of anatase and enlarges the specific surface area to sevenfold. The high adsorption of organic pollutants over CQDs/TiO2 leads to a better photodegradation performance. The classical quenching tests revealed that the hole was the primary factor contributing to degradation. The mechanism of CQDs/TiO2 in the efficient photodegradation was proposed. [ABSTRACT FROM AUTHOR]