Search

Cation transmission/electron-transfer reagent anion storage mode electron-transfer ion/ion reactions and beam-type collisional activation of the polypeptide ions are performed in rapid succession in the high-pressure collision cell (Q2) of a quadrupole/time-of-flight tandem mass spectrometer (QqTOF), where the electron-transfer reagent anions are accumulated. Duty cycles for both electron-transfer dissociation (ETD)) and collision-induced dissociation (CID) experiments are improved relative to ion trapping approaches since there are no discrete ion storage and reaction steps for ETD experiments and no discrete ion storage step and frequency tuning for CID experiments. For this technique, moderately high resolution and mass accuracy are also obtained due to mass analysis via the TOF analyzer. This relatively simple approach has been demonstrated with a triply charged tryptic peptide, a triply charged tryptic phosphopeptide, and a triply charged tryptic N-linked glycopeptide. For the tryptic peptide, the sequence is identified with more certainty than would be available from a single method alone due to the complementary information provided by these two dissociation methods. Because of the complementary information derived from both ETD and CID dissociation methods, peptide sequence and post-translational modification (PTM) sites for the phosphopeptide are identified. This combined ETD and CID approach is particularly useful for characterizing glycopeptides because ETD generates information about both peptide sequence and locations of the glycosylation sites, whereas CID provides information about the glycan structure.

Cationic peptide electron-transfer products that do not fragment spontaneously are exposed to ion trap collisional activation immediately upon formation while they pass through a high-pressure collision cell (Q2), where the electron-transfer reagent anions are stored. Radial ion acceleration, which is normal to the ion flow, is implemented by applying an auxiliary dipolar alternating current to a pair of opposing rods of the Q2 quadrupole array at a frequency in resonance with the surviving electron-transfer products. Collisional cooling of cations in the pressurized Q2 ensures efficient overlap of the positive and negative ions for ion/ion reactions and also gives rise to relatively long residence times (milliseconds) for ions in Q2, making it possible to fragment ions via radial excitation during their axial transmission. The radial activation for transmission mode electron-transfer ion/ ion reactions has been demonstrated with a doubly protonated tryptic peptide, a triply protonated phospho-peptide, and [[M + 7H].sup.7+] ions of ubiquitin. In all cases, significant increases in fragment ion yields and structural information from electron-transfer dissociation (ETD) were observed, suggesting the utility of this method for improving transmission mode ETD performance for relatively low charge states of peptides and proteins.

2,5-Dimethylfuran (DMF) is an important candidate for liquid fuels and can be produced from biomass derived 5-hydroxymethylfurfural (HMF). Efficient transformation of HMF to DMF has not been achieved over a non-noble catalyst under milder conditions. Herein, we developed a copper and cobalt bimetallic nanoparticle catalyst supported on N-graphene-modified Al2O3 (CuCo®/NGr/α-Al2O3). It was found that CuCo®/NGr/α-Al2O3 could catalyze the conversion of HMF to DMF effectively and the yield of DMF could reach 99%. The catalyst was completely not active for the hydrogenation of the C=C bond in furan and thus no 2,5-bis(hydroxymethyl)tetrahydrofuran (DHTHF) and 2,5-dimethyltetrahydrofuran (DMTHF) were detected. [ABSTRACT FROM AUTHOR]

The properties of supported non-noble metal particles with a size of less than 1 nm are unknown because their synthesis is a challenge. A strategy has now been created to immobilize ultrafine non-noble metal particles on supports using metal-organic frameworks (MOFs) as metal precursors. Ni/SiO2 and Co/SiO2 catalysts were synthesized with an average metal particle size of 0.9 nm. The metal nanoparticles were immobilized uniformly on the support with a metal loading of about 20 wt %. Interestingly, the ultrafine non-noble metal particles exhibited very high activity for liquid-phase hydrogenation of benzene to cyclohexane even at 80 °C, while Ni/SiO2 with larger Ni particles fabricated by a conventional method was not active under the same conditions. [ABSTRACT FROM AUTHOR]