Search

Children and adolescents are vulnerable to dental trauma due to their active lifestyles, lack of coordination, and inexperience in recognizing potentially dangerous situations. Early recognition and proper management of dental trauma is crucial in order to minimize the risk of complications and ensure optimal outcomes. The aim of this study was to perform a retrospective analysis of all dento-alveolar injuries in children and adolescents who were treated at the University Children's Hospital Zurich from 2018-2020 by the resident physicians of the Centre of Dental Medicine of the University of Zurich. All information concerning age and sex distribution, seasonal and weekly variations, as well as aetiology, types of trauma and co-affected structures in the head and neck area from 389 patients was analysed. For data extraction, a parameterised Excel list was created, enabling a continuous data collection. In the study, 65% of the patients were male and 35% female. The average patient age was 7 years and 4 months. The highest frequency of trauma occurred in mixed dentition (49%), followed by deciduous dentition (36%) and permanent dentition (15%). Most of the accidents occurred in the second quarter of the year, especially in the month of May slightly more injuries were reported. The most common injuries were increased tooth mobility (40%) and tooth fractures without pulp exposure (34%). Less frequent were tooth fractures with pulp exposure (12%), lateral dislocations (29%), avulsions (21%), intrusions (8%), extrusions (6%) and root fractures (4%). As in many studies the upper central incisors were most often affected. Main causes of dental trauma were falls, especially by bike (18%) or scooter (14%). Soft tissue injuries or fractures, in the area of the head and neck occurred in 59% and 10% of the cases simultaneously accompanied by dento-alveolar trauma.

PURPOSE: This study investigated the effect of toothbrush bristle stiffness and brushing force on the cleaning efficacy in vitro. MATERIALS AND METHODS: Eighty bovine dentin samples were allocated to eight groups (n=10). Two custom-made toothbrushes of different bristle stiffness (soft and medium) were tested at four different brushing forces (1, 2, 3 and 4 N). Dentin samples were stained in black tea and brushed (60 strokes/min) for a total of 25 min in a brushing machine with an abrasive solution (RDA 67). Photographs were taken after 2 and 25 min of brushing time. Cleaning efficacy was measured planimetrically. RESULTS: After 2 min of brushing, the soft-bristle toothbrush did not cause statistically significantly different cleaning efficacy at different brushing forces, while the medium-bristle toothbrush cleaned statistically significantly less efficaceously only at 1 N. Comparing the two different toothbrushes, higher cleaning efficacy was observed only at 1 N for the soft-bristle brush. At 25 min brushing time, the soft-bristle cleaned statistically significantly better at 4 N compared to 1 N and 2 N and at 3 N compared to 1 N. Using the medium-bristle, cleaning efficacy increased with increasing brushing force. After 25 min of brushing, no statistically significant difference was observed between the two different toothbrushes. CONCLUSION: Irrespective the brushing force, the use of a soft or medium toothbrush results in comparable cleaning efficacy. At 2 min brushing time, increasing the brushing force does not increase the cleaning efficacy.

Objectives: Very little data are known about charcoal toothpastes. The aim of this study was to counteract the missing data by determining the relative dentin abrasivity (RDA) and relative enamel abrasivity (REA) values of charcoal toothpastes. Methods: Radioactively charged dentin and enamel samples were randomly divided into groups of eight specimens. Each group was brushed with two of total 12 charcoal toothpaste slurries and with a standard abrasive with a known RDA and REA value. The measured radioactivity in counts per minute within the slurries corresponds to the amount of dentin or enamel abraded. RDA and REA values of the charcoal toothpastes were expressed relative to the known value of the standard slurry. Results: The RDA and REA values of the charcoal toothpastes have a broad range of 24-166 and 0-14, respectively. Conclusions: The RDA and REA values do not differ significantly from previously tested commercially available toothpastes. However, the lack of fluoride compounds in many of the investigated charcoal toothpastes can have a less beneficial effect for the consumers. It is very important to educate patients accordingly.

Purpose To evaluate and compare the wear of selected resin-based fissure sealants with different compositions properties under erosive, abrasive, and erosive/abrasive conditions. Methods Forty-five samples of the following resin-based fissure sealants were prepared: Fissurit (fluoride free), Fissurit F (with fluoride), Fissurit FX (55 wt.% filler content), Grandio Seal (70 wt.% nano-filler content) and bovine enamel. Fifteen samples from each material were randomly allocated into three groups according to the wear condition they would be subjected to as follows: erosive condition (citric acid, 1 min, pH 2.3), abrasive condition (120 brushing strokes at 2 N, toothpaste slurry RDA value = 69), and erosive/abrasive condition (combination of both). The wear challenges were repeated six times each day for 10 days. The material wear was measured using a stylus profilometer. Kruskal–Wallis and Conover’s test was applied to compare the resulting material wear between the groups. Results Under erosive conditions, Grandio Seal and Fissurit FX showed statistically significantly the least material wear. Under abrasive and erosive/abrasive conditions, Grandio Seal showed statistically significantly the least material wear. Fissurit F showed statistically significantly the highest material wear under abrasive and erosive/abrasive conditions, after dental enamel (p < 0.05). Conclusion Higher filler content in sealants leads to better wear resistance. Incorporating fluoride into sealants seems to reduce their wear resistance at similar filler contents.

INTRODUCTION: Dentists' knowledge and expertise, especially in their early career, are primarily shaped during undergraduate studies. This cross-sectional study aimed to assess the knowledge and perception of Syrian under- and postgraduate students regarding diagnosing and managing molar-incisor hypomineralisation (MIH)-affected teeth. MATERIALS AND METHODS: Final-year dental students (FY-students), postgraduates in paediatric dentistry (PD-postgraduates) and postgraduates in other lines of specialty (OS-postgraduates) in all Syrian dental schools were invited to participate in an established web-based survey covering the knowledge and attitudes regarding the prevalence, aetiology, diagnosis and management of MIH. Data were analysed with descriptive statistics and Fisher's exact/chi-squared tests at 5%. RESULTS: In total, 1142 post- and undergraduate students from six public and five private dental schools in Syria participated in this study (867 FY-students, 74 PD-postgraduates and 201 OS-postgraduates). PD-postgraduates were found to present statistically significantly better knowledge regarding MIH compared with the two other groups. Only 19% of FY-students and 54% of OS-postgraduates reported themselves familiar with MIH (compared with 97% of PD-postgraduates). Similarly, 18% of FY-students and 27% of OS-postgraduates were capable of diagnosing MIH (compared with 81% of PD-postgraduates). Stainless-steel crowns and direct composite fillings were chosen as most suitable for treating MIH-affected molars from all responders. CONCLUSIONS: FY-students and even OS-postgraduates in Syria lack knowledge and confidence when confronted with MIH. The university curricula need to include more educational materials to equip the students with the necessary tools to manage MIH clinically.

PURPOSE: This in-vitro study deals with the question of whether the wear and tear of the manual toothbrush over a simulated timeframe up to 24 months has an effect on its cleaning performance. The purpose was to find indications as to whether and when a toothbrush needs to be replaced based on its cleaning performance. MATERIALS AND METHODS: Models equipped with artificial teeth (coated with titanium dioxide) were brushed in-vitro using a brushing machine with clamped manual toothbrushes. The machine carried out even, horizontal brush strokes (120 brush strokes/min) for 1 min with a constant contact pressure of 2.5 N. The percentage of the area of titanium dioxide removed from the buccal, mesial and distal surfaces of the artificial teeth corresponded to the cleaning performance. The manual toothbrushes were used on bovine roots to simulate the wear and tear after 2, 4, 6, 12, 18, 24 months of use. The cleaning performance was re-evaluated after each simulated timepoint of wear. In addition, the brushes were photographed after each cycle. RESULTS: An increase in the in-vitro cleaning performance of the toothbrush was observed up to 6 months of wear compared to the starting point. After that, the cleaning performance decreased somewhat, but always remained above the initial cleaning performance. CONCLUSION: Based on the in-vitro cleaning performance after 24 months, the toothbrush would not have to be replaced. However, this in-vitro study cannot determine when a toothbrush should be replaced, because in-vivo it is also dependent on a variety of other factors such as fraying and microbial colonisation. Direct transfer of results from this study to everyday clinical practice is therefore difficult.

Bulk-fill composites enable timesaving and less technical-sensitive application of restorations. This study investigated and compared the marginal integrity of classical and bulk-fill composite restorations in primary and permanent molars before and after thermo-mechanical loading (TML). Two Class II cavities were prepared in each of 20 primary and 20 permanent molars. The molars were randomised in four groups for each molar type. Groups 1 and 5 were restored with a high-viscous bulk-fill composite (Tetric PowerFill), groups 2 and 6 were restored with a flowable bulk-fill composite (Tetric PowerFlow), groups 3 and 7 were restored with a high-viscous classical composite (Tetric Prime), and groups 4 and 8 were restored with a flowable classical composite (Tetric EvoFlow). In permanent molars, the flowable composites were covered with a 2-mm layer of high-viscous composite (groups 6 and 8). The restorations were subjected to TML in a custom-made chewing machine (5-50 °C, 2 min dwelling time, × 1000; 400 ,000 loading cycles, 1.7 Hz, 49 N), and quantitative marginal analysis was conducted using scanning electron microscopy. Marginal integrity of each restoration was calculated as a percentage of continuous margins before and after TML. The tested high-viscous bulk-fill restoration showed similarly high marginal integrity in primary and permanent molars as the classical restoration. The tested flowable bulk-fill restoration showed the lowest marginal integrity compared to all other restorations after TML. In contrast to flowable bulk-fill restorations, high-viscous bulk-fill restorations show similar marginal integrity as classical hybrid composite restorations after TML, in both primary and permanent molars.

BACKGROUND: Diamond particles have recently been used as abrasives in toothpastes, which raises questions about its abrasive behaviour towards enamel. This study was carried out to investigate the abrasive enamel wear caused by three diamond-loaded toothpastes (Candida White Diamond: CWD, Swiss Smile Diamond Glow: SSDG, Emoform F Diamond: EFD) and to compare it with a traditional toothpaste with silica abrasive (Colgate Total Original CTO). METHODS: Eighty bovine enamel samples were divided into four groups (n = 20) and brushed for 21,600 cycles (60 cycles/min) for 6 h at 2.5-N brushing force. The abrasive enamel wear was recorded with a contact profilometer. The median and interquartile range (IQR) of the abrasive enamel wear was calculated in each group. Pairwise comparisons were conducted using Wilcoxon signed rank exact test and the p value was adjusted according to Holm. Significance level was set at 0.05. RESULTS: Diamond-loaded toothpastes caused statistically significantly higher abrasive wear than the traditional toothpaste (p < 0.0001). SSDG caused statistically significantly higher enamel wear (19.0 µm (11.2)) than CWD (8.4 µm (4.6)) and EFD (7.3 µm (3.9)) (p < 0.0001). CONCLUSIONS: Diamond-loaded toothpastes cause higher enamel wear than toothpastes with traditional abrasives and also exhibit different abrasivity behaviour compared to each other.

The geometrical properties of toothbrushes play a role in developing abrasive tooth wear and non-carious cervical lesions. This study investigated the interplay between the toothbrush tuft arrangement (crossed vs. parallel) and bristle stiffness (soft vs. medium) on the abrasive dentin wear using three slurries with different levels of abrasivity (RDA: 67, 121 and 174). Twelve groups of bovine dentin samples (n = 20) were brushed with a combination of the aforementioned variables. Abrasive dentin wear was recorded with a profilometer and the resulting abrasive wear of each group was calculated and compared with each other using two-way ANOVA and pairwise tests. Toothbrushes with parallel tuft arrangement caused statistically significantly higher dentin wear compared to crossed tuft arrangement, regardless of the abrasivity level of the used slurry and the bristle stiffness. Soft crossed tuft toothbrushes caused statistically significantly higher abrasive dentin wear than medium crossed tuft toothbrushes, while soft and medium parallel tuft toothbrushes caused the same amounts of dentin wear, regardless of the RDA value of the used slurry. These results could be helpful for dentists and dental hygienists when advising patients. Crossed tuft toothbrushes could be a less-abrasive choice in comparison to parallel tuft toothbrushes.

OBJECTIVE: This in vitro study aimed to investigate the effect of a sonic toothbrush on the resulting abrasive dentine wear using toothpastes with different abrasivities compared to the use of a manual toothbrush. METHODS: Ninety-six bovine dentine samples were divided into six groups and subjected to a brushing sequence (sonic: 20 min, 0.9 N, 10 strokes/min; manual: 20 min, 1.6 N, 60 strokes/min) as follows: group 1: Elmex Sensitive Plus (RDA = 28) + manual toothbrush; group 2: Elmex Sensitive + sonic toothbrush; group 3: Elmex Kariesschutz (RDA = 65) + manual toothbrush; group 4: Elmex Kariesschutz +sonic toothbrush; group 5: Colgate Total Original (RDA = 121) + manual toothbrush; and group 6: Colgate Total Original +sonic toothbrush. The abrasive dentine wear was measured profilometrically. RESULTS: The median (IQR) abrasive dentine wear was as follows: Elmex Sensitive Plus (manual toothbrush: 2.7 µm (0.8), sonic toothbrush: 3.1 µm (1.9)); Elmex Kariesschutz (manual toothbrush: 4.9 µm (1.4), sonic toothbrush: 6.4 µm (2.1)); and Colgate Total Original (manual toothbrush: 5.2 µm (1.1), sonic toothbrush: 9.0 µm (3.1)). Differences in dentine wear between sonic and manual toothbrushes were statistically significant only in the groups brushed with Elmex Kariesschutz and Colgate Total Original (p ≤ 0.05). CONCLUSION: Brushing with a sonic toothbrush could result in a higher abrasive dentine wear compared to manual toothbrush when combined with toothpastes with high abrasivity values.

BACKGROUND: Knowledge obtained at the undergraduate level regarding molar incisor hypomineralisation (MIH) has an impact on future practice of dentists and paediatric dentists. This cross-sectional study aimed to assess final-year dental students' knowledge, attitudes and beliefs towards MIH in all Swiss universities. METHODS: A previously utilised survey (in both English and German) was distributed among final-year dental students in all Swiss dental schools (Basel, Bern, Geneva and Zurich). It probed students' knowledge, attitudes and beliefs regarding the diagnosis, prevalence, aetiology, and management of MIH, and was structured in two parts: knowledge/perception and clinical application. The students' responses were analysed statistically with descriptive statistics. RESULTS: 113 out of 133 final-year Swiss dental students took part in the study (85%). Nearly all students were familiar with MIH (99%), but only 12% of them felt confident when diagnosing MIH clinically. Direct composite fillings (66%), indirect restorations (28%) and preformed stainless-steel crowns (26%) were chosen as most suitable treatment options for MIH-affected teeth. CONCLUSION: Final-year Swiss dental students are well informed about MIH. However, they report low level of confidence when clinically confronted with MIH-affected teeth regarding its diagnosis and treatment. Swiss Universities curricula should be revisited accordingly.

PURPOSE: To investigate the effect of energy drinks supplementation with green tea extract on the erosive dentine wear. MATERIALS AND METHODS: Six groups of bovine dentine samples (n = 15) were subjected to four cycles erosive attacks (10 min, 25 °C) and remineralisation (artificial saliva, 60 min, 37°C) using the following formulas: tap water; green tea extract; Red Bull; Red Bull supplemented with green tea extract; Red Bull Light; Red Bull Light supplemented with green tea extract. The erosive dentine wear - ie, the irreversible dentine loss - was measured using a stylus profilometer (µm, accuracy = 40 nm). RESULTS: Median and interquartile range (IQR) of erosive dentine wear for the tested energy drinks before and after the supplementation with green tea extract were calculated as follows: Red Bull (before: 3.3 µm (1.0)); after: 1.2 µm (0.6)); Red Bull Light (before: 3.3 µm (0.9)); after: 2.0 µm (0.4)). The difference between the groups before and after the supplementation was statistically significant (P ˂0.05). The erosive dentine wear for the tap water group was calculated at 0.4 µm (0.6) and for the green tea extract group at -1.0 µm (1.3). CONCLUSIONS: Supplementation of energy drinks with green tea extract could reduce the erosive dentine wear caused by energy drink in vitro.