Search

Background: Temporary anchorage devices (TADs) are broadly used in orthodontic treatment. TADs must be placed accurately to avoid collision against tooth roots. To place miniscrews with a higher accuracy, a digitally designed surgical guide was proposed in previous studies. However, to our knowledge, there have been no articles that have assessed the minimal required length to achieve good drilling accuracy. The objective of the present study was to evaluate the accuracy of pre-drilling using computer-aided designed surgical guides with different lengths. Methods: A typodont model was scanned, and surgical guides of 3.0, 4.5, and 6.0 mm were designed. Duplicated typodonts and the surgical guides were printed with a 3D printer. Using these models and surgical guides, pre-drillings were performed. Freehand drilling was also conducted for the control. The drilled models were scanned with micro-computed tomography to evaluate the accuracy. Results: The mean errors at the tip of the drill were 0.44 mm, 0.61 mm, 0.41 mm, and 0.24 mm for the freehand drilling, and 3.0, 4.5, and 6.0 mm for the surgical guide, respectively. Conclusion: The results suggested that a longer surgical guide was recommended to achieve good insertion accuracy for a narrow interradicular space, and that 3.0 mm was enough when an error of 1.0 mm was acceptable for the insertion site. [ABSTRACT FROM AUTHOR]

Damage to buried pipelines caused by local amplification of seismic ground motion in highly nonuniform grounds is not yet fully understood. The development of methods to evaluate the amplification of ground motion in complex ground structures is thus desirable. Here, we report large-scale nonlinear seismic ground response analysis using a 3D nonlinear finite element method (FEM) and attempt to reproduce observed seismic ground motion. We also discuss the strain amplification processes and their effects on buried pipelines in detail. The findings are expected to aid in improving the seismic resistance of buried pipelines. [ABSTRACT FROM AUTHOR]

Various types of coating films were obtained from hydrothermally synthesized Nb-doped TiO 2 (NTO) and Cs x WO 3 (CWO) nanoparticles. The coating films possessed multifunctionality including near infrared (NIR) absorption and photocatalysis abilities. The NTO and CWO nanoparticles were synthesized by a unique solvothermal reaction in which water induced by an esterification reaction between alcohol and carboxylic acid can act as a hydrolyzing agent for metal precursors. NTO was synthesized by the unique solvothermal reaction for the first time. The reaction accompanied by the reduction of Ti 4+ to Ti 3+ led to the formation of nanoparticles with both NIR absorption and photocatalytic properties. The effect of the ethanol-acetic acid ratio on the morphology of the obtained NTO was investigated, and the larger amount of acetic acid led to a larger nanoparticle size, indicating the size controllability. The two types of coating film, including CWO and NTO nanoparticles, were obtained for comparison: (1) coexistent coating film: one side of the quartz glass was coated with a dispersion, including both CWO and NTO nanoparticles, and (2) double-sided coating film: a quartz glass coated with a CWO dispersion on one side and an NTO dispersion on the other side. The double-sided coating led to higher multifunctionality. Furthermore, the optimized condition for the double-sided coating was investigated by using various NTO particles obtained using different ethanol-acetic acid ratios.

The porpose of this study was to determine the optimal length of power arms for achieving controlled anterior tooth movement in segmented arch mechanics combined with power arm. A three-dimensional finite element method was applied for the simulation of en masse anterior tooth retraction in segmented power arm mechanics. The type of tooth movement, namely, the location of center of rotation of the maxillary central incisor in association with power arm length, was calculated after the retraction force was applied. When a 0.017 × 0.022-in archwire was inserted into the 0.018-in slot bracket, bodily movement was obtained at 9.1 mm length of power arm, namely, at the level of 1.8 mm above the center of resistance. In case a 0.018 × 0.025-in full-size archwire was used, bodily movement of the tooth was produced at the power arm length of 7.0 mm, namely, at the level of 0.3 mm below the center of resistance. Segmented arch mechanics required shorter length of power arms for achieving any type of controlled anterior tooth movement as compared to sliding mechanics. Therefore, this space closing mechanics could be widely applied even for the patients whose gingivobuccal fold is shallow. The segmented arch mechanics combined with power arm could provide higher amount of moment-to-force ratio sufficient for controlled anterior tooth movement without generating friction, and vertical forces when applying retraction force parallel to the occlusal plane. It is, therefore, considered that the segmented power arm mechanics has a simple appliance design and allows more efficient and controllable tooth movement.