Search

In the majority of pharmaceutical applications, polymers are employed extensively in a diverse range of pharmaceutical products, serving as indispensable components of contemporary solid oral dosage forms. A comprehensive understanding of the properties of polymers and selection the appropriate methods of characterization is essential for the design and development of novel drug delivery systems and manufacturing processes. Orally disintegrating film (ODF) formulations are considered to be a potential substitute to traditional oral dosage forms and an alternative method of drug administration for children and uncooperative adult patients, including those with swallowing difficulties. A multitude of pharmaceutical formulations with varying mechanical and biopharmaceutical properties have emerged from the modification of the original polymeric bulk. Here we propose different formulation approaches, i.e. solvent casting (SC), 3D printing (3DP), electrospinning (ES), and lyophilization (LP) that enabled us to adjust the disintegration time and the release profile of poorly water soluble haloperidol (HAL, BCS class II) from PVA (polyvinyl alcohol) based polymer films while maintaining similar hydrogel composition. In this study, the solubility of haloperidol in aqueous solution was improved by the addition of lactic acid. The prepared films were evaluated for their morphology (SEM, micro-CT), physicochemical and biopharmaceutical properties. TMDSC, TGA and PXRD were employed for extensive thermal and structural analysis of fabricated materials and their stability. These results allowed us to establish correlations between preparation technology, structural characteristics and properties of PVA films and to adapt the suitable manufacturing technique of the ODFs to achieve appropriate HAL dissolution behaviour., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier B.V.)

This study aims to quantify haloperidol and methylparaben in a liquid pharmaceutical formulation (2 mg/ml) using UV spectrometry and the simultaneous equations method. Additionally, we explored the stability of haloperidol under various stress conditions. The UV analysis revealed maximum absorption peaks at 248 nm for haloperidol and 256 nm for methylparaben, using a 1 % (v/v) lactic acid solution as the solvent. Method validation, conducted according to ICH guidelines, affirmed the method's reliability, showing excellent results in terms of linearity, precision, accuracy, and sensitivity. The method allows direct application to finished products, enabling simultaneous quantification without extractions. Its simplicity, speed, and cost-effectiveness make it ideal for routine controls in pharmaceutical industry haloperidol solution analyses. The method extends to monitoring forced degradation, indicating photolytic and hydrolytic degradation under acidic and basic conditions, while affirming thermal and oxidative stability. This proposed UV spectrometric method serves as a compelling alternative to pharmacopeia-recommended techniques, simplifying simultaneous determination of the active ingredient and preservative. This streamlines analysis, reducing time and costs. Additionally, it proves valuable in small industries lacking sophisticated instrumentation, offering insights into active ingredient behavior during forced degradation., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Inc. All rights reserved.)

Aqueous suspensions containing crystalline drug in the sub-micron range is a favorable platform for long-acting injectables where particle size can be used to obtain a desired plasma-concentration profile. Stabilizers are added to the suspensions and screened extensively to define the optimal formulation composition. In the initial formulation screening the amount of drug compound can be limited, necessitating milling methods for small-volume screening predictable for scale-up. Hence, adaptive focused ultrasound was investigated as a potential milling method for rapid small-volume suspensions by identifying the critical process parameters during preparation. Suspensions containing drug compounds with different mechanical properties and thereby grindability, i.e., cinnarizine, haloperidol, and indomethacin with brittle, elastic, and plastic properties, respectively, were investigated to gain an understanding of the manufacturing with adaptive focused acoustics as well as comparison to already established milling techniques. Using a DoE-design, peak incident power was identified as the most crucial process parameter impacting the milling process for all three compounds. It was possible to decrease the sizes of drug particles to micron range after one minute of focused ultrasound exposure which was superior compared to other milling techniques (e.g., non-focused ultrasound exposure). The addition of milling beads decreased the drug particle sizes even further, thus to a lower degree than other already established milling techniques such as milling by dual centrifugation. This study thereby demonstrated that adaptive focused ultrasonication was a promising method for rapid homogenization and particle size reduction to micron range for different compounds varying in grindability without altering the crystalline structure., (© 2024. The Author(s).)

G-protein-coupled receptors (GPCRs) represent the largest family of drug targets. Upon activation, GPCRs signal primarily via a diverse set of heterotrimeric G proteins. Most GPCRs can couple to several different G protein subtypes. However, how drugs act at GPCRs contributing to the selectivity of G protein recognition is poorly understood. Here, we examined the G protein selectivity profile of the dopamine D 2 receptor (D 2 ), a GPCR targeted by antipsychotic drugs. We show that D 2 discriminates between six individual members of the G i/o family, and its profile of functional selectivity is remarkably different across its ligands, which all engaged D 2 with a distinct G protein coupling pattern. Using structural modeling, receptor mutagenesis, and pharmacological evaluation, we identified residues in the D 2 binding pocket that shape these ligand-directed biases. We further provide pharmacogenomic evidence that natural variants in D 2 differentially affect its G protein biases in response to different ligands., Competing Interests: Declarations of interests The authors declare no competing interests., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

In the present study, a HPLC/DAD method was set up to allow for the determination and quantification of malondialdehyde (MDA) in the brain of rodents (rats). Chromatographic separation was achieved on Supelcosil LC-18 (3 μm) SUPELCO Column 3.3 cm × 4.6 mm and Supelco Column Saver 0.5 μm filter by using a mobile phase acetonitrile (A) and phosphate buffer (20 mM, pH = 6) (B). Isocratic elution was 14% for (A) and 86% for (B). The injection volume (loop mode) was 100 μL with an analysis time of 1.5 min. Flow rate was set at 1 mL/min. The eluted compound was detected at 532 nm by a DAD detector by keeping the column oven at room temperature. The results indicated that the method has good linearity in the range of 0.2-20 μg/g. Both intra- and inter-day precision, expressed as RSD, were ≤15% and the accuracies ranged between ±15%. The lower limit of quantification (LLOQ), stability, and robustness were evaluated and satisfied the validation criteria. The method was successfully applied in a study of chronic toxicology following different treatment regimens with haloperidol and metformin.

We have demonstrated the utility of a 3D shape and pharmacophore similarity scoring component in molecular design with a deep generative model trained with reinforcement learning. Using Dopamine receptor type 2 (DRD2) as an example and its antagonist haloperidol 1 as a starting point in a ligand based design context, we have shown in a retrospective study that a 3D similarity enabled generative model can discover new leads in the absence of any other information. It can be efficiently used for scaffold hopping and generation of novel series. 3D similarity based models were compared against 2D QSAR based, indicating a significant degree of orthogonality of the generated outputs and with the former having a more diverse output. In addition, when the two scoring components are combined together for training of the generative model, it results in more efficient exploration of desirable chemical space compared to the individual components., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

There are several routes of administration to the brain, including intraparenchymal, intraventricular, and subarachnoid injections. The blood-brain barrier (BBB) impedes the permeation and access of most drugs to the central nervous system (CNS), and consequently, many neurological diseases remain undertreated. For past decades, to circumvent this effect, several nanocarriers have been developed to deliver drugs to the brain. Importantly, intranasal (IN) administration can allow direct delivery of drugs into the brain through the anatomical connection between the nasal cavity and brain without crossing the BBB. In this regard, dendrimers may possess great potential to deliver drugs to the brain by IN administration, bypassing the BBB and reducing systemic exposure and side effects, to treat diseases of the CNS. In this original concise review, we highlighted the few examples advocated regarding the use of dendrimers to deliver CNS drugs directly via IN. This review highlighed the few examples of the association of dendrimer encapsulating drugs (e.g., small compounds: haloperidol and paeonol; macromolecular compounds: dextran, insulin and calcitonin; and siRNA) using IN administration. Good efficiencies were observed. In addition, we will present the in vivo effects of PAMAM dendrimers after IN administration, globally, showing no general toxicity., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Elsevier Masson SAS. All rights reserved.)

The outbreak of novel coronavirus disease 2019 (COVID-19) caused by severe acute respiratory syndrome coronavirus-2 (SARS-CoV-2) virus continually led to infect a large population worldwide. SARS-CoV-2 utilizes its NSP6 and Orf9c proteins to interact with sigma receptors that are implicated in lipid remodeling and ER stress response, to infect cells. The drugs targeting the sigma receptors, sigma-1 and sigma-2, have emerged as effective candidates to reduce viral infectivity, and some of them are in clinical trials against COVID-19. The antipsychotic drug, haloperidol, exerts remarkable antiviral activity, but, at the same time, the sigma-1 benzomorphan agonist, dextromethorphan, showed pro-viral activity. To explore the potential mechanisms of biased binding and activity of the two drugs, haloperidol and dextromethorphan towards NSP6, we herein utilized molecular docking-based molecular dynamics simulation studies. Our extensive analysis of the protein-drug interactions, structural and conformational dynamics, residual frustrations, and molecular switches of NSP6-drug complexes indicates that dextromethorphan binding leads to structural destabilization and increase in conformational dynamics and energetic frustrations. On the other hand, the strong binding of haloperidol leads to minimal structural and dynamical perturbations to NSP6. Thus, the structural insights of stronger binding affinity and favorable molecular interactions of haloperidol towards viral NSP6 suggests that haloperidol can be potentially explored as a candidate drug against COVID-19. KEY MESSAGES: •Inhibitors of sigma receptors are considered as potent drugs against COVID-19. •Antipsychotic drug, haloperidol, binds strongly to NSP6 and induces the minimal changes in structure and dynamics of NSP6. •Dextromethorphan, agonist of sigma receptors, binding leads to overall destabilization of NSP6. •These two drugs bind with NSP6 differently and also induce differences in the structural and conformational changes that explain their different mechanisms of action. •Haloperidol can be explored as a candidate drug against COVID-19.

Separation of antipsychotic drugs from whole blood and urine is of great importance for clinic and forensic laboratories. In this work, chlorprothixene, haloperidol and risperidone representing the first and second generations of antipsychotic drugs were studied. Among them, chlorprothixene and risperidone were investigated for the first time by electromembrane extraction (EME). After the screening, 2-nitrophenyl octyl ether (NPOE) was used as the supported liquid membrane (SLM). The EME performance for spiked water (pH 2), whole blood and urine was tested and optimized individually. Using NPOE and 60 V, efficient EME was achieved from urine and whole blood with trifluoroacetic acid as the acceptor solution. The equilibrium time required for EME was dependent on the sample matrices. The steady-state of EME was reached in 30 min and 20 min for whole blood and urine, respectively. At steady-state, the EME recoveries of the targets from different sample matrices were satisfactory, and were in the range of 74%-100%. The proposed EME approach combined with liquid chromatography-tandem mass spectrometry (LC-MS/MS) was evaluated using whole blood and urine. The obtained linearity was 1-200 ng mL -1 , and the coefficient of determination (R 2 ) was ≥ 0.9853 for haloperidol and ≥ 0.9936 for chlorprothixene and risperidone. The limit of detection (LOD) and accuracy for all the targets ranged from 0.2-0.6 ng mL -1 and 102%-110%, respectively, and the repeatability at low (1 ng mL -1 ), medium (10 ng mL -1 ) and high (200 ng mL -1 ) concentration was ≤ 12% (RSD). Finally, the validated approach was successfully used to determine chlorprothixene, risperidone and haloperidol in whole blood and urine from rats, which were treated with chlorprothixene, risperidone and haloperidol at low therapeutic dose, respectively., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020. Published by Elsevier B.V.)

Gestational methylazoxymethanol acetate (MAM) treatment produces offspring with adult phenotype relevant to schizophrenia, including positive- and negative-like symptoms, cognitive deficits, dopaminergic dysfunction, structural and functional abnormalities. Here we show that adult rats prenatally treated with MAM at gestational day 17 display significant increase in dopamine D3 receptor (D3) mRNA expression in prefrontal cortex (PFC), hippocampus and nucleus accumbens, accompanied by increased expression of dopamine D2 receptor (D2) mRNA exclusively in the PFC. Furthermore, a significant change in the blood perfusion at the level of the circle of Willis and hippocampus, paralleled by the enlargement of lateral ventricles, was also detected by magnetic resonance imaging (MRI) techniques. Peripubertal treatment with the non-euphoric phytocannabinoid cannabidiol (30 mg/kg) from postnatal day (PND) 19 to PND 39 was able to reverse in MAM exposed rats: i) the up-regulation of the dopamine D3 receptor mRNA (only partially prevented by haloperidol 0.6 mg/kg/day); and ii) the regional blood flow changes in MAM exposed rats. Molecular modelling predicted that cannabidiol could bind preferentially to dopamine D3 receptor, where it may act as a partial agonist according to conformation of ionic-lock, which is highly conserved in GPCRs. In summary, our results demonstrate that the mRNA expression of both dopamine D2 and D3 receptors is altered in the MAM model; however only the transcript levels of D3 are affected by cannabidiol treatment, likely suggesting that this gene might not only contribute to the schizophrenia symptoms but also represent an unexplored target for the antipsychotic activity of cannabidiol., Competing Interests: Declaration of Competing Interest VD is a consultant for GW Pharmaceuticals, UK, and FAI, FP and VD receive funding from GW Pharmaceuticals, UK. CTW is employed by Boehringer Ingelheime Pharma & Co KG which did not influence design, analysis and interpretation of the study., (Copyright © 2020 Elsevier Inc. All rights reserved.)

We have developed Markov state models (MSMs) and hidden Markov models (HMMs) that describe the binding of haloperidol to the D 3 dopamine receptor. Haloperidol is an antipsychotic drug that binds with nanomolar affinity to the D 3 dopamine receptor, where it functions as an inverse agonist. The models were constructed using an adaptive sampling approach from 519 individual molecular dynamics simulations totaling 122 μs of simulated time and encompass the entire drug binding process. They reveal short-lived metastable bound states and two distinct long-lived bound conformations that cannot be separated in affinity using our current methodology. This work extends the use of MSMs and HMMs to study ligand binding, which thus far has been limited to simpler systems.

The objective of this project was to study the percutaneous absorption of lorazepam, diphenhydramine hydrochloride, and haloperidol from a topical Pluronic lecithin organogel, also known as ABH gel, across the porcine ear skin and verify its suitability for topical application. ABH gel was prepared using lecithin in isopropyl palmitate solution (1:1) as an oil phase and 20% w/v Poloxamer 407 solution as an aqueous phase. The gel was characterized for pH, viscosity, drug content, and thermal behavior. A robust high-performance liquid chromatography method was developed and validated for simultaneous analysis of lorazepam, diphenhydramine hydrochloride, and haloperidol. The percutaneous absorption of lorazepam, diphenhydramine hydrochloride, and haloperidol from ABH gel was carried out using Franz cells across the Strat-M membrane and pig ear skin. The pH of ABH gel was found to be 5.66 ± 0.13. The retention time of diphenhydramine hydrochloride, haloperidol, and lorazepam was found to be 5.2 minutes, 7.8 minutes, and 18.9 minutes, respectively. The ABH gel was found to be stable for up to 30 days. Theoretical steady state plasma concentrations (CSS) of diphenhydramine hydrochloride, haloperidol, and lorazepam calculated from flux values were found to be 1.6 ng/mL, 0.13 ng/mL, and 2.30 ng/mL, respectively. The theoretical CSS of diphenhydramine hydrochloride, haloperidol, and lorazepam were much lower than required therapeutic concentrations for antiemetic activity to relieve chemotherapy-induced nausea and vomiting. From the percutaneous absorption data, it was evident that ABH gel failed to achieve required systemic levels of lorazepam, diphenhydramine hydrochloride, and haloperidol following topical application., (Copyright© by International Journal of Pharmaceutical Compounding, Inc.)

Haloperidol is a typical antipsychotic drug (APD) associated with an increased risk of extrapyramidal side effects (EPSs) and hyperprolactinemia relative to atypical APDs such as clozapine. Both drugs are dopamine D 2 receptor (D 2 R) antagonists, with contrasting kinetic profiles. Haloperidol displays fast association/slow dissociation at the D 2 R, whereas clozapine exhibits relatively slow association/fast dissociation. Recently, we have provided evidence that slow dissociation from the D 2 R predicts hyperprolactinemia, whereas fast association predicts EPS. Unfortunately, clozapine can cause severe side effects independent of its D 2 R action. Our results suggest an optimal kinetic profile for D 2 R antagonist APDs that avoids EPS. To begin exploring this hypothesis, we conducted a structure-kinetic relationship study of haloperidol and revealed that subtle structural modifications dramatically change binding kinetic rate constants, affording compounds with a clozapine-like kinetic profile. Thus, optimization of these kinetic parameters may allow development of novel APDs based on the haloperidol scaffold with improved side-effect profiles.

In this paper, drug-drug chemical interactions between two different aromatic compounds were studied by mass spectrometry. Specifically, we examined non-covalent complexes (NCX) between paclitaxel, a chemotherapeutic compound, and medications widely used in palliative care for depression, psychosis, and anxiety. It is unknown whether psychotropic medications directly interact with paclitaxel. Here, we use a simple and rapid electrospray ionization mass spectrometry in vitro assay, which has been predictive in the case of neuropeptides, to measure the relative strength of non-covalent interactions. This chemical interaction is most likely due to the overlap of aromatic rings of π-orbitals between paclitaxel and five commonly used medications: diazepam, clonozepam, sertraline, fluoxetine, and haloperidol. Molecular modeling illustrates that differences in the stability of the NCXs are likely due to the distance between the aromatic rings present in both the paclitaxel and antidepressant medications. Graphical Abstract.

Several lines of evidence suggest that selective sigma-2 (σ 2 ) ligands might be useful for the treatment of solid tumors. However, very few selective σ 2 ligands have been identified. This study was aimed at identifying new selective σ 2 receptor ligands using a previously identified agent, SYA 013 as a lead. Four groups, homopiperazine, piperazine, tropane and selected oxime analogs of the homopiperazines were identified, synthesized and subsequently screened at the σ 1 and σ 2 receptors. The results demonstrate that these scaffolds can be modified to obtain selective σ 2 receptor ligands. 1-(5-Chloropyridin-2-yl)-4-(3-((4-fluorophenyl)thio)propyl)-1,4-diazepane, 7 and 3-(4-chlorophenyl)-8-(3-((2-fluorophenyl)thio)propyl)-8-azabicyclo[3.2.1]octan-3-ol, 21 were identified as the highest binding affinity ligands (σ 2 Ki = 2.2 nM) and (4-(4-(5-chloropyridin-2-yl)-1,4-diazepan-1-yl)-1-(4-fluorophenyl)-butan-1-one oxime, 22 as a high affinity and the most selective ligand for the σ 2 receptor (σ 1 Ki/σ 2 Ki = 41.8)., (Published by Elsevier Ltd.)

Our previous study has revealed 4-(4-(4-chlorophenyl)-1,4-diazepan-1-yl)-1-(4-fluorophenyl)butan-1-one·2HCl (SYA013) 1 as a sigma ligand with moderate selectivity for the sigma-2 receptor. Given the overexpression of sigma receptors in solid tumors and reports of sigma ligands with anticancer activities, we selected 1 for evaluation in several solid tumor cell lines. In addition, we have synthesized new analogs of 1 and now report that several of them bind preferentially at the sigma-2 receptor and have shown inhibition of several cancer cell lines including MDA-MB-231, MDA-MB-486, A549, PC-3, MIA PaCa-2 and Panc-1 cells. In particular, compounds 1 and 12 have demonstrated sub-micromolar activity against the Panc-1 cell line. It has also been observed that several of these compounds demonstrate selective toxicity toward cancer cells, when compared to normal cells., (Published by Elsevier Ltd.)

Haloperidol (Hal) is a well-known typical antipsychotic. Hepatic first pass metabolism leads to its limited oral bioavailability. This study aimed at enhancing transdermal delivery of Hal via spanlastic formulae. Hal-loaded spanlastics of Span®60 and an edge activator (EA) were successfully prepared by ethanol injection method according to a 3 1 .4 1 full factorial design. In this design, independent variables were X 1 , EA type, and X 2 , Span®60 to EA ratio. Y 1 , percentage entrapment efficiency (EE%); Y 2 , particle size (PS); Y 3 , deformability index (DI); and Y 4 , percentage drug released after 4h (Q4h), were chosen as dependent variables. The Fourier-transform infrared spectral analysis showed no considerable chemical interaction between Hal and the used excipients. Both factors affected significantly all the responses except DI. Desirability of each prepared formula was calculated based on maximizing EE% and Q4h and minimizing PS. Formula F6, with X 1 , Tween®80, and X 2 , 8:2, had the highest desirability value followed by F7, with X 1 , Tween®80, and X 2 , 6:4, and both were chosen as selected formulae (SF) for further investigation. F6 (having more entrapped Hal), F7 (of smaller PS), and Hal solution in propylene glycol were subjected to ex vivo permeation test through newborn rat skin. Both formulae showed marked enhancement in drug permeation compared with drug solution. The significantly higher Q 36h and J 36h of F7 from F6 may indicate that the smaller particle size aided more than higher entrapment in achieving a higher permeation for Hal of 3.5±0.2μg/cm 2 .h. These results are promising for further investigation of this formula.

Recently, a novel negative allosteric modulator (NAM) of the D 2 -like dopamine receptors 1 was identified through virtual ligand screening. This ligand comprises a thieno[2,3- d]pyrimidine scaffold that does not feature in known dopaminergic ligands. Herein, we provide pharmacological validation of an allosteric mode of action for 1, revealing that it is a NAM of dopamine efficacy and identify the structural determinants of this allostery. We find that key structural moieties are important for functional affinity and negative cooperativity, while functionalization of the thienopyrimidine at the 5- and 6-positions results in analogues with divergent cooperativity profiles. Successive compound iterations have yielded analogues exhibiting a 10-fold improvement in functional affinity, as well as enhanced negative cooperativity with dopamine affinity and efficacy. Furthermore, our study reveals a fragment-like core that maintains low μM affinity and robust negative cooperativity with markedly improved ligand efficiency.

The results of research on selected drugs used in palliative care are presented, including fentanyl, tramadol, metoclopramide, hyoscine butylbromide, midazolam, haloperidol, levomepromazine and clonazepam. Interpretation of their ESI mass spectra obtained by the use of a triple quadrupole linear ion trap mass spectrometer is given. As a result, fragmentation pathways described in the literature are complemented and presented with more details. On their basis, transitions for quantitative analysis are selected and chromatographic conditions for the determination of the palliative care drugs are proposed as well. These results enable future studies on palliative care drugs in elderly patients including both their quantitation in body fluids and easier identification of their metabolites.

Haloperidol (Hal) is one of the widely used antipsychotic drugs. When orally administered, it suffers from low bioavailability due to hepatic first pass metabolism. This study aimed at developing Hal-loaded penetration enhancer-containing spanlastics (PECSs) to increase transdermal permeation of Hal with sustained release. PECSs were successfully prepared using ethanol injection method showing reasonable values of percentage entrapment efficiency, particle size, polydispersity index and zeta potential. The statistical analysis of the ex vivo permeation parameters led to the choice of F1L - made of Span ® 60 and Tween ® 80 at the weight ratio of 4:1 along with 1% w/v Labrasol ® - as the selected formula (SF). SF was formulated into a hydrogel by using 2.5% w/v of HPMC K4M. The hydrogel exhibited good in vitro characteristics. Also, it retained its physical and chemical stability for one month in the refrigerator. The radiolabeling of SF showed a maximum yield by mixing of 100 µl of diluted formula with 50 µl saline having 200 MBq of 99m Tc and containing 13.6 mg of reducing agent (NaBH 4 ) and volume completed to 300 µl by saline at pH 10 for 10 min as reaction time. The biodistribution study showed that the transdermal 99m Tc-SF hydrogel exhibited a more sustained release pattern and longer circulation duration with pulsatile behavior in the blood and higher brain levels than the oral 99m Tc-SF dispersion. So, transdermal hydrogel of SF may be considered a promising sustained release formula for Hal maintenance therapy with reduced dose size and less frequent administration than oral formula.

The σ 1 receptor is a poorly understood membrane protein expressed throughout the human body. Ligands targeting the σ 1 receptor are in clinical trials for treatment of Alzheimer's disease, ischemic stroke, and neuropathic pain. However, relatively little is known regarding the σ 1 receptor's molecular function. Here, we present crystal structures of human σ 1 receptor bound to the antagonists haloperidol and NE-100, and the agonist (+)-pentazocine, at crystallographic resolutions of 3.1 Å, 2.9 Å, and 3.1 Å, respectively. These structures reveal a unique binding pose for the agonist. The structures and accompanying molecular dynamics (MD) simulations identify agonist-induced structural rearrangements in the receptor. Additionally, we show that ligand binding to σ 1 is a multistep process that is rate limited by receptor conformational change. We used MD simulations to reconstruct a ligand binding pathway involving two major conformational changes. These data provide a framework for understanding the molecular basis for σ 1 agonism.

Haloperidol (HALO) is a weak base with very low aqueous solubility that is used as an antipsychotic drug. This study aimed to improve its solubility by forming HALO/β-cyclodextrin (β-CD)-based ternary complexes with organic acids. The solubility of HALO/β-CD binary and HALO/β-CD/organic acid ternary complexes in different media (i.e. citrate buffer pH 3 and 6) was explored. The stoichiometric ratio between the drug and β-CD was 1:1 in all complexes formed. The solubility of HALO/β-CD binary complexes significantly increased in citrate buffer pH 3 compared with citrate buffer pH 6. For the ternary complexes, HALO/β-CD/tartaric acid and HALO/β-CD/lactic acid in citrate buffer pH 3 increased HALO solubility compared with HALO/β-CD/succinic acid due to their higher unionized species. The highest stability constant and complexation efficiency values in citrate buffer pH 3 were shown by the ternary complexes with lactic acid followed by tartaric acid and succinic acid, respectively. Results indicated that lactic acid provided the greatest binding strength and solubilization efficiency for the complex.

The primary aim of this study was to identify pharmaceutically acceptable amorphous polymers for producing 3D printed tablets of a model drug, haloperidol, for rapid release by fused deposition modeling. Filaments for 3D printing were prepared by hot melt extrusion at 150°C with 10% and 20% w/w of haloperidol using Kollidon ® VA64, Kollicoat ® IR, Affinsiol ™ 15 cP, and HPMCAS either individually or as binary blends (Kollidon ® VA64 + Affinisol ™ 15 cP, 1:1; Kollidon ® VA64 + HPMCAS, 1:1). Dissolution of crushed extrudates was studied at pH 2 and 6.8, and formulations demonstrating rapid dissolution rates were then analyzed for drug-polymer, polymer-polymer and drug-polymer-polymer miscibility by film casting. Polymer-polymer (1:1) and drug-polymer-polymer (1:5:5 and 2:5:5) mixtures were found to be miscible. Tablets with 100% and 60% infill were printed using MakerBot printer at 210°C, and dissolution tests of tablets were conducted at pH 2 and 6.8. Extruded filaments of Kollidon ® VA64-Affinisol ™ 15 cP mixtures were flexible and had optimum mechanical strength for 3D printing. Tablets containing 10% drug with 60% and 100% infill showed complete drug release at pH 2 in 45 and 120 min, respectively. Relatively high dissolution rates were also observed at pH 6.8. The 1:1-mixture of Kollidon ® VA64 and Affinisol ™ 15 cP was thus identified as a suitable polymer system for 3D printing and rapid drug release., (Copyright © 2018 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.)

As the number of hospitalized and immunocompromised patients continues to rise, invasive fungal infections, such as invasive candidiasis and aspergillosis, threaten the life of millions of patients every year. The azole antifungals are currently the most prescribed drugs clinically that display broad-spectrum antifungal activity and excellent oral bioavailability. Yet, the azole antifungals have their own limitations and are unable to meet the challenges associated with increasing fungal infections and the accompanied development of resistance against azoles. Exploring combination therapy that involves the current azoles and another drug has been shown to be a promising strategy. Haloperidol and its derivative, bromperidol, were originally discovered as antipsychotics. Herein, we synthesize and report a series of bromperidol derivatives and their synergistic antifungal interactions in combination with a variety of current azole antifungals against a wide panel of fungal pathogens. We further select two representative combinations and confirm the antifungal synergy by performing time-kill assays. Furthermore, we evaluate the ability of selected combinations to destroy fungal biofilm. Finally, we perform mammalian cytotoxicity assays with the representative combinations against three mammalian cell lines., (Copyright © 2017 Elsevier Masson SAS. All rights reserved.)

The use of haloperidol metabolite II (HP-metabolite II) prodrugs is an emerging strategy in the treatment of cancer. HP-metabolite II exhibits antiproliferative properties at micromolar concentrations inducing apoptosis in different types of cancer. Thus, the application of the prodrug approach appears as a useful method leading to much more desirable pharmacokinetic and pharmacodynamic properties. Some studies have shown that the esterification of the hydroxyl group of HP-metabolite II with 4-phenylbutiric acid (4-PBA) or valproic acid enhances the anticancer therapeutic potency. The current progresses in the design, synthesis and evaluation of anticancer activity of HP metabolite II prodrugs will be discussed in this review.

A mechanism that enables direct aldehyde C-H functionalization has been achieved via the synergistic merger of photoredox, nickel, and hydrogen atom transfer catalysis. This mild, operationally simple protocol transforms a wide variety of commercially available aldehydes, along with aryl or alkyl bromides, into the corresponding ketones in excellent yield. This C-H abstraction coupling technology has been successfully applied to the expedient synthesis of the medicinal agent haloperidol.

Here, we report a simple and direct method to visualize the protonation/deprotonation of an amine active pharmaceutical ingredient (API) in the solid state using a solid-vapor reaction with propargyl bromide and Raman imaging for the assessment of the API during the manufacturing process of solid formulations. An alkyne tagging occurred on the free form of solid haloperidol by the vapor phase reaction, and a distinct Raman signal of alkyne was detected. Alkyne signal monitoring by Raman imaging enabled us to visualize the distribution of the free-form haloperidol in a solid formulation. On the other hand, haloperidol hydrochloride did not react with propargyl bromide in the solid-vapor reaction, and the alkyne signal was not observed. Using the difference in reactivity, the protonation/deprotonation of the amine API in the solid state could be visualized. As an example of application, we tried to visually assess the protonation/deprotonation state when the free-form haloperidol was ground with acids using the solid-vapor reaction and Raman imaging and found that haloperidol was partially protonated when ground with 2 equivalents of hydrogen chloride. Furthermore, we demonstrated the relationship between the degree of protonation and the amount of water added as a medium for grinding haloperidol with succinic acid., (Copyright © 2017 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.)

Purpose: The purpose of this study was to investigate the applicability of Raman spectroscopy for visualization and quantification of inkjet-printed pharmaceuticals., Methods: Haloperidol was used as a model active pharmaceutical ingredient (API), and a printable ink base containing lactic acid and ethanol was developed. Inkjet printing technology was used to apply haloperidol ink onto three different substrates. Custom-made inorganic compacts and dry foam, as well as marketed paracetamol tablets were used as the substrates., Results: Therapeutic personalized doses were printed by using one to ten printing rounds on the substrates. The haloperidol content in the finished dosage forms were determined by high-performance liquid chromatography (HPLC). The distribution of the haloperidol on the dosage forms were visualized using Raman chemical imaging combined with principal components analysis (PCA). Raman spectroscopy combined with modeling by partial least squares (PLS) regression was used for establishment of a quantitative model of the haloperidol content in the printed dosage forms. A good prediction of the haloperidol content was achieved for the inorganic compacts, while a slightly poorer prediction was observed for the paracetamol tablets. It was not possible to quantify haloperidol on the dry foam due to the low and varying density of the substrate., Conclusions: Raman spectroscopy is a useful tool for visualization and quality control of inkjet printed personalized medicine.

Salts are generally prepared by acid-base reaction in relatively large volumes of organic solvents, followed by crystallization. In this study, the potential for preparing a pharmaceutical salt between haloperidol and maleic acid by a novel solvent-free method using a twin-screw melt extruder was investigated. The pH-solubility relationship between haloperidol and maleic acid in aqueous medium was first determined, which demonstrated that 1:1 salt formation between them was feasible (pH max 4.8; salt solubility 4.7 mg/mL). Extrusion of a 1:1 mixture of haloperidol and maleic acid at the extruder barrel temperature of 60 °C resulted in the formation of a highly crystalline salt. The effects of operating temperature and screw configuration on salt formation were also investigated, and those two were identified as key processing parameters. Salts were also prepared by solution crystallization from ethyl acetate, liquid-assisted grinding, and heat-assisted grinding and compared with those obtained by melt extrusion by using DSC, PXRD, TGA, and optical microscopy. While similar salts were obtained by all methods, both melt extrusion and solution crystallization yielded highly crystalline materials with identical enthalpies of melting. During the pH-solubility study, a salt hydrate form was also identified, which, upon heating, converted to anhydrate similar to that obtained by other methods. There were previous reports of the formation of cocrystals, but not salts, by melt extrusion. 1 H NMR and single-crystal X-ray diffraction confirmed that a salt was indeed formed in the present study. The haloperidol-maleic acid salt obtained was nonhygroscopic in the moisture sorption study and converted to the hydrate form only upon mixing with water. Thus, we are reporting for the first time a relatively simple and solvent-free twin-screw melt extrusion method for the preparation of a pharmaceutical salt that provides material comparable to that obtained by solution crystallization and is amenable to continuous manufacturing and easy scale up.

The discovery of haloperidol catalyzed a breakthrough in our understanding of the biochemical basis of schizophrenia, improved the treatment of psychosis, and facilitated deinstitutionalization. In doing so, it solidified the role for chemical neuroscience as a means to elucidate the molecular underpinnings of complex neuropsychiatric disorders. In this Review, we will cover aspects of haloperidol's synthesis, manufacturing, metabolism, pharmacology, approved and off-label indications, and adverse effects. We will also convey the fascinating history of this classic molecule and the influence that it has had on the evolution of neuropsychopharmacology and neuroscience.

In recent years, RNA interference (RNAi) has emerged as a potential therapeutic offering the opportunity to treat a wide range of diseases, including prostate cancer. Modified cyclodextrins have emerged as effective gene delivery vectors in a range of disease models. The main objective of the current study was to formulate anisamide-targeted cyclodextrin nanoparticles to interact with the sigma receptor (overexpressed on the surface of prostate cancer cells). The inclusion of octaarginine in the nanoparticle optimized uptake and endosomal release of siRNA in two different prostate cancer cell lines (PC3 and DU145 cells). Resulting nanoparticles were less than 200 nm in size with a cationic surface charge (∼+20 mV). In sigma receptor-positive cell lines, the uptake of anisamide-targeted nanoparticles was reduced in the presence of the sigma receptor competitive ligand, haloperidol. When cells were transfected in 2D, the levels of PLK1 mRNA knockdown elicited by targeted versus untargeted nanoparticles tended to be greater but the differences were not statistically different. In contrast, when cells were grown on 3D scaffolds, recapitulating bone metastasis, targeted formulations showed significantly higher levels of PLK1 mRNA knockdown (46% for PC3 and 37% for DU145, p < 0.05). To our knowledge, this is the first time that a targeted cyclodextrin has been used to transfect prostate cancer cells in a 3D model of bone metastasis.

Background: In patients with the Congenital Sucrase-Isomaltase Deficiency (CSID), who lack intestinal sucrase-isomaltase enzyme, a suspension of yeast sucrase is applied as a drug to compensate the enzyme deficiency. While antipsychotic drugs are used for the treatment of schizophrenia, administering multiple drugs at the same time may counteract each other., Methods: In this study, the interaction between trifluoperazine and haloperidol as antipsychotic drugs on oral drug yeast sucrase was investigated. In this regard, the kinetic parameters of enzyme were determined in the presence or absence of the drugs. The kinetic parameters of the drugs such as Ki and IC50 were also calculated. Lineweaver - Burk plot was used to reveal the type of inhibition., Results: The results showed that both drugs could reduce sucrase activity and decrease the Vmax of the enzyme by non-competitive inhibition. The IC50 and Ki values of the drugs were determined to be 0.7 and 0.068 mM and 0.45 and 0.063 mM for haloperidol and trifluoperazine, respectively. The results suggested that trifluoperazine binds to the enzyme with higher affinity than haloperidol. Fluorescence measurement was used for conformational investigations of the drugs and sucrase interaction. It was shown that the drugs bind to free enzyme and enzyme-substrate complex which are accompanied with hyperchromicity. This suggests that tryptophan residues of the enzyme transferred to hydrophobic medium after binding of the drugs to the enzyme., Conclusion: The finding of this research revealed that both trifluoperazine and haloperidol could inhibit sucrase in non-competitive manner. The kinetic parameters and conformational changes due to binding of trifluoperazine to the enzyme were different from that of haloperidol., (Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.)

(±)-MRJF22 [(±)-2], a novel prodrug of haloperidol metabolite II (sigma-1 receptor antagonist/sigma-2 receptor agonist ligand) obtained by conjugation to valproic acid (histone deacetylase inhibitor) via an ester bond, exhibits antiangiogenic activity, being able to reduce human retinal endothelial cell (HREC) viability in a comparable manner to bevacizumab. Moreover, (±)-2 was able to significantly reduce viable cells count, endothelial cell migration, and tube formation in vascular endothelial growth factor A (VEGF-A) stimulated HREC cultures.

Haloperidol is a commonly prescribed antipsychotic drug currently administered as oral and injectable preparations. This study aimed to prepare haloperidol intranasal miniemulsion helpful for psychiatric emergencies and exhibiting lower systemic exposure and side effects associated with non-target site delivery. Haloperidol miniemulsions were successfully prepared by spontaneous emulsification adopting 2(3) factorial design. The effect of three independent variables at two levels each namely; oil type (Capmul®-Capryol™90), lipophilic emulsifier type (Span 20-Span 80) and HLB value (12-14) on globule size, PDI and percent locomotor activity inhibition in mice was evaluated. The optimized formula (F4, Capmul®, Tween 80/Span 20, HLB 14) showed globule size of 209.5±0.98nm, PDI of 0.402±0.03 and locomotor inhibition of 83.89±9.15% with desirability of 0.907. Biodistribution study following intranasal and intravenous administration of the radiolabeled (99m)Tc mucoadhesive F4 revealed that intranasal administration achieved 1.72-fold higher and 6 times faster peak brain levels compared with intravenous administration. Drug targeting efficiency percent and brain/blood exposure ratios remained above 100% and 1 respectively after intranasal instillation compared to a maximum brain/blood exposure ratio of 0.8 post intravenous route. Results suggested the CNS delivery of major fraction of haloperidol via direct transnasal to brain pathway that can be a promising alternative to oral and parenteral routes in chronic and acute situations. Haloperidol concentration of 275.6ng/g brain 8h post intranasal instillation, higher than therapeutic concentration range of haloperidol (0.8 to 5.15ng/ml), suggests possible sustained delivery of the drug through nasal route., (Copyright © 2016 Elsevier B.V. All rights reserved.)

The purpose of this study is to confirm the impact of polar functional groups on inter and intra-molecular hydrogen bonding in haloperidol (HP) and droperidol (DP) and, hence, their effects on dissolution using a new approach. To confirm our theory, a new molecule: deshydroxy-haloperidol (DHP) was designed and its synthesis was requested from a contract laboratory. The molecule was then studied and compared to DP and HP. Unlike DHP, both the HP and DP molecules have hydrogen donor groups, therefore, DHP was used to confirm the relative effects of the hydrogen donor group on solubility and crystal packing. The solid dispersions of the three structurally related molecules: HP, DP, and DHP were prepared using PVPK30, and characterized using XRPD and IR. A comparative dissolution study was carried out in aqueous medium. The absence of a hydrogen bonding donor group in DHP resulted in an unexpected increase in its aqueous solubility and dissolution rate from solid dispersion, which is attributed to weaker crystal pack. The increased dissolution rate of HP and DP from solid dispersions is attributed to drug-polymer hydrogen bonding that interferes with the drug-drug intermolecular hydrogen bonding and provides thermodynamic stability of the dispersed drug molecules. The drug-drug intermolecular hydrogen bond is the driving force for precipitation and crystal packing.

The subjects of this study are the structures and electron densities of the carbon/silicon analogues haloperidol/sila-haloperidol (1a/1b) and venlafaxine/sila-venlafaxine (2a/2b). The parent carbon compounds 1a (an antipsychotic agent) and 2a (an antidepressant) are both in clinical use. For haloperidol/sila-haloperidol, three published structures were studied in more detail: the structures of haloperidol hydrochloride (1a·HCl), haloperidol hydropicrate (1a·HPic) and sila-haloperidol hydrochloride (1b·HCl). For venlafaxine/sila-venlafaxine, the published structures of venlafaxine (2a), venlafaxine hydrochloride (2a·HCl; as orthorhombic (2a·HCl-ortho) and monoclinic polymorph (2a·HCl-mono)) and sila-venlafaxine hydrochloride (2b·HCl) were investigated. Based on these structures, the molecular electron densities were reconstructed by using the invariom formalism. They were further analysed in terms of Bader's quantum theory of atoms in molecules, electrostatic potentials mapped onto electron density isosurfaces and Hirshfeld surfaces. These studies were performed with a special emphasis on the comparison of the corresponding carbon/silicon analogues.

Delivery of therapeutics to the brain is challenging because many organic molecules have inadequate aqueous solubility and limited bioavailability. We investigated the efficiency of a dendrimer-based formulation of a poorly aqueous soluble drug, haloperidol, in targeting the brain via intranasal and intraperitoneal administration. Aqueous solubility of haloperidol was increased by more than 100-fold in the developed formulation. Formulation was assessed via different routes of administration for behavioral (cataleptic and locomotor) responses, and for haloperidol distribution in plasma and brain tissues. Dendrimer-based formulation showed significantly higher distribution of haloperidol in the brain and plasma compared to a control formulation of haloperidol administered via intraperitoneal injection. Additionally, 6.7 times lower doses of the dendrimer-haloperidol formulation administered via the intranasal route produced behavioral responses that were comparable to those induced by haloperidol formulations administered via intraperitoneal injection. This study demonstrates the potential of dendrimer in improving the delivery of water insoluble drugs to brain.

Human serum paraoxonase (PON1, EC 3.1.8.1.) is a high-density lipid (HDL)-associated, calcium-dependent enzyme. In this study, the effects of Haloperidol, Fluoxetine hydrochloride, Diazepam and Acepromazine drugs used for the therapy of antidepressant and antipsychotic diseases, on paraoxonase enzyme activity was studied in in vitro inhibition studies on purified human serum PON1. PON1 enzyme was purified from human blood using two-step procedures, namely, ammonium sulfate precipitation and sepharose-4B-l-tyrosine-1-napthylamine hydrophobic interaction chromatography. The overall purification of human serum PON1 was obtained in a activity of 109.29 U/mL and this enzyme was purified 125-fold. The SDS-polyacrylamide gel electrophoresis of the enzyme indicates a single band with an apparent MW of 43 kDa. Inhibition studies indicated that haloperidol and fluoxetine hydrocloride were effective inhibitors on purified human serum PON1 activity with IC50 of 0.187 and 3.08 mM values, respectively. The kinetics of interaction of haloperidol and fluoxetine hydrocloride with the purified human serum PON1 indicated uncompetitive inhibiton pattern with Ki of 4.15 and 0.007 mM, respectively.

Haloperidol (Hal) is a ligand that can target sigma 2 receptors over-expressed in non-small cell lung cancer. Hal targeted nanoparticles of bovine serum albumin (BSA) were prepared for pulmonary delivery of doxorubicin (DOX). The conjugation was confirmed by Fourier transform infrared spectroscopy (FTIR) and (1)H nuclear magnetic resonance ((1)H NMR) spectroscopic methods. Nanoparticles were prepared by desolvation method from BSA-Hal and were loaded with DOX. They were characterized for their morphology, particle size, zeta potential, drug loading and release efficiency. The optimized nanoparticles were spray-dried using trehalose, l-leucin and mannitol as dry powder inhaler (DPI) in different inlet temperatures between 80 and 120°C. The obtained nanocomposites were characterized for their aerodynamic diameter, specific surface area (cm(2)/g) and fine particle fraction (FPF) by a Cascade Impactor device. The optimized nanoparticles showed particle size of 218 nm, zeta potential of -25.4 mV, drug entrapment efficiency of 89% and release efficiency of 56% until 2 h. After spray drying of these nanoparticles, the best results were obtained from mannitol with an inlet temperature of 80°C which produced a mean aerodynamic diameter of 4.58 μm, FPF of 66% and specific surface area of 6302.99 cm(2)/g. The obtained results suggest that the designed DPI could be a suitable inhaler for targeted delivery of DOX in pulmonary delivery.

The sigma-1 receptor (S1R) is a 223-amino-acid membrane protein that resides in the endoplasmic reticulum and the plasma membrane of some mammalian cells. The S1R is regulated by various synthetic molecules including (+)-pentazocine, cocaine and haloperidol and endogenous molecules such as sphingosine, dimethyltryptamine and dehydroepiandrosterone. Ligand-regulated protein chaperone functions linked to oxidative stress and neurodegenerative disorders such as amyotrophic lateral sclerosis (ALS) and neuropathic pain have been attributed to the S1R. Several client proteins that interact with S1R have been identified including various types of ion channels and G-protein coupled receptors (GPCRs). When S1R constructs containing C-terminal monomeric GFP2 and YFP fusions were co-expressed in COS-7 cells and subjected to FRET spectrometry analysis, monomers, dimers and higher oligomeric forms of S1R were identified under non-liganded conditions. In the presence of the prototypic S1R agonist, (+)-pentazocine, however, monomers and dimers were the prevailing forms of S1R. The prototypic antagonist, haloperidol, on the other hand, favoured higher order S1R oligomers. These data, in sum, indicate that heterologously expressed S1Rs occur in vivo in COS-7 cells in multiple oligomeric forms and that S1R ligands alter these oligomeric structures. We suggest that the S1R oligomerization states may regulate its function(s).

A number of drugs exhibit unexpected pharmacological effects related to their ability to bind more than one receptor in humans. Haloperidol a typical antipsychotic drug appeared in several reports to be used in schizophrenia patients in which the significant of Alzheimer's disease has been reduced. The etiology of the disease is characterized by aggregates of amyloid plaques, largely composed of amyloid-β peptide formed from the amyloid precursor protein cleaved by Memapsin 2. To investigate if haloperidol can bind to Memapsin 2 active site, an initial molecular docking was performed as a preliminary in-silico screening test followed by in vitro enzyme inhibition assay. Haloperidol was found to fit readily in Memapsin binding site with IC(50)value 250mM. Haloperidol can be considered as important lead or important target can be modified for more inhibitory activity, with the intention of protection or treatment for Alzheimer's disease.

Several molecularly imprinted polymers (MIPs) were prepared in the present work, and their binding properties were evaluated in comparison with a nonimprinted polymer (NIP). An optimized MIP was selected and applied for selective extraction and analysis of haloperidol in rabbit brain tissue. A molecularly imprinted solid-phase extraction (MISPE) method was developed for cleanup and preconcentration of haloperidol in brain samples before HPLC-UV analysis. Selectivity of the MISPE procedure was investigated using haloperidol and some structurally different drugs with similar polarity that could exist simultaneously in brain tissue. The extraction and analytical process was calibrated in the range of 0.05-10 ppm. The recovery of haloperidol in this MISPE process was calculated between 79.9 and 90.4%. The limit of detection (LOD) and the limit of quantification (LOQ) of the assay were 0.008 and 0.05 ppm, respectively. Intraday precision and interday precision values for haloperidol analysis were less than 5.86 and 7.63%, respectively. The MISPE method could effectively extract and concentrate haloperidol from brain tissue in the presence of clozapine and imipramine. Finally, the imprinted polymer was successfully applied for the determination of haloperidol in a real rabbit brain sample after administration of a toxic dose. Therefore, the proposed MISPE method could be applied in the extraction and preconcentration before HPLC-UV analysis of haloperidol in rabbit brain tissue.

Previous work from our labs has indicated that a tropane analog of haloperidol with potent D2 binding but designed to avoid the formation of MPP(+)-like metabolites, such as 4-(4-chlorophenyl)-1-(4-(4-fluorophenyl)-4-oxobutyl)pyridin-1-ium (BCPP(+)) still produced catalepsy, suggesting a strong role for the D2 receptor in the production of catalepsy in rats, and hence EPS in humans. This study tested the hypothesis that further modifications of the tropane analog to produce compounds with less potent binding to the D2 receptor than haloperidol, would produce less catalepsy. These tests have now revealed that while haloperidol produced maximum catalepsy, these compounds produced moderate to low levels of catalepsy. Compound 9, with the least binding affinity to the D2R, produced the least catalepsy and highest Minimum Adverse Effective Dose (MAED) of the analogs tested regardless of their affinities at other receptors including the 5-HT1AR. These observations support the hypothesis that moderation of the D2 binding of the tropane analogs could reduce catalepsy potential in rats and consequently EPS in man., (Published by Elsevier Ltd.)

Homodimers of dopamine D2-like receptors are suggested to be of particular importance in the pathophysiology of schizophrenia and, thus, serve as promising targets for the discovery of atypical antipsychotics. This study describes the development of a series of novel bivalent molecules with a pharmacophore derived from the dopamine receptor antagonist haloperidol. These dimers were investigated in comparison to their monomeric analogues for their D2long, D2short, D3, and D4 receptor binding and the ability to bridge two neighboring receptor protomers. Radioligand binding studies provided diagnostic insights when Hill slopes close to two for the bivalent ligand 13 incorporating 22 spacer atoms and a comparative analysis with monovalent control ligands indicated a bivalent binding mode with a simultaneous occupancy of two neighboring binding sites., (Copyright © 2014 Elsevier Ltd. All rights reserved.)

Neurokinin receptors (NKRs) have been shown to be involved in many physiological processes, rendering them promising novel drug targets, but also making them the possible cause for side effects of several drugs. Aiming to answer the question whether the binding to NKRs could have a share in the side effects or even the desired effects of already licensed drugs, we generated a set of ligand-based common feature pharmacophore models based on the structural information about subtype-selective and nonselective NKR antagonists and screened an in-house database mainly composed of licensed drugs. The prospective pharmacological investigations of the virtual hits haloperidol, eprazinone, and fenbutrazate confirmed them to be NKR ligands in vitro. By the identification of licensed drugs as so far unknown NKR ligands, this study contributes to establishing an activity profile of the investigated compounds and confirms the presented pharmacophore models as useful tools for this purpose.

The repeatability and extraction recoveries of parallel electromembrane extraction (Pa-EME) was thoroughly investigated in the present project. Amitriptyline, fluoxetine, and haloperidol were isolated from eight samples of pure water, undiluted human plasma, and undiluted human urine, respectively; in total 24 samples were processed in parallel. The repeatability was found to be independent of the different sample matrices (pure water samples, human plasma, and water) processed in parallel, although the respective samples contained different matrix components. In another experiment seven of the 24 wells were perforated. Even though the perforation caused the total current level in the Pa-EME setup to increase, the intact circuits were unaffected by the collapse in seven of the circuits. In another approach, exhaustive extraction of amitriptyline, fluoxetine, and haloperidol was demonstrated from pure water samples. Amitriptyline and haloperidol were also isolated exhaustively from undiluted human plasma samples; the extraction recovery of fluoxetine from undiluted human plasma was 81%. Finally, the sample throughput was increased with the Pa-EME configuration. The extraction recoveries were investigated by processing 1, 8, 68, or 96 samples in parallel in 10min; neither the extraction recoveries nor the repeatability was affected by the total numbers of samples. Eventually, the Pa-EME was combined with ultra performance liquid chromatography (UPLC) to combine high-throughput sample preparation with high-throughput analytical instrumentation. The aim of the present investigation was to demonstrate the potential of electromembrane extraction as a high throughput sample preparation platform; and hopefully to increase the interest for EME in the bioanalytical field to solve exisiting and novel analytical challenges., (Copyright © 2014 Elsevier B.V. All rights reserved.)

Examination of the stability of clonazepam, diazepam, alprazolam, haloperidol, and doxepin in basic solutions was performed, together with an assessment of the kinetic (k, t0.1i t0.5) and thermodynamic (Ea, ΔH(++)i ΔS(++)) stability-indicating parameters, which were compared with the lipophilicity (logP) of the studied drugs. It was observed that the calculated values of Ea, ΔH(++) and ΔS(++) for the studied drugs increased from 41.04 kJ/mol to 125.50 kJ/mol, from 37.82 kJ/mol to 122.24 kJ/mol and from -167.09 J/Kmol to 53.02 J/Kmol, respectively, along with an increase of lipophilicity (logP) from 2.12 to 4.30 for the most hydrophilic alprazolam to the most lipophilic haloperidol. The degradation products were identified using UPLC/MS/MS method., (Copyright © 2013 Elsevier B.V. All rights reserved.)

Purpose: To present a novel approach of greatly enhancing aqueous solubility of a model weakly basic drug, haloperidol, by using weak acids that would not form salts with the drug and to attain physically stable form of amorphous drug by drying such aqueous solutions., Method: Aqueous solubility of haloperidol in presence of increasing concentrations of four different weak organic acids (malic, tartaric, citric, fumaric) were determined. Several concentrated aqueous solutions with differing drug-to-acid molar ratios were dried in vacuum oven, and dried materials were characterized by DSC, powder XRD, dissolution testing, and stability study., Result: Acids were selected such that they would not form salts with haloperidol. Haloperidol solubility increased greatly with increased concentrations of malic, tartaric and citric acids, reaching >300 mg/g of solution. In contrast to the haloperidol HCl aqueous solubility of 4 mg/g, this may be called supersolubilization. Fumaric acid did not cause such solubilization as it had low water solubility. Dried solids formed dispersions of amorphous haloperidol in acids that were either amorphous or partially crystalline. Amorphous haloperidol was physically stable and had better dissolution rate than HCl salt., Conclusion: A novel method of drug solubilization in aqueous media by acid-base interaction is presented. Physically stable amorphous systems of drugs may also be prepared by using this organic solvent-free approach.

Pharmacological modulators of host-microbial interactions can in principle be identified using high-content screens. However, a severe limitation of this approach is the lack of insights into the mode of action of compounds selected during the primary screen. To overcome this problem, we developed a combined experimental and computational approach. We designed a quantitative multiparametric image-based assay to measure intracellular mycobacteria in primary human macrophages, screened a chemical library containing FDA-approved drugs, and validated three compounds for intracellular killing of M. tuberculosis. By integrating the multiparametric profiles of the chemicals with those of siRNAs from a genome-wide survey on endocytosis, we predicted and experimentally verified that two compounds modulate autophagy, whereas the third accelerates endosomal progression. Our findings demonstrate the value of integrating small molecules and genetic screens for identifying cellular mechanisms modulated by chemicals. Furthermore, selective pharmacological modulation of host trafficking pathways can be applied to intracellular pathogens beyond mycobacteria., (Copyright © 2013 Elsevier Inc. All rights reserved.)

The sigma-1 receptor (Sig1R) is up-regulated in many human tumors and plays a role in the control of cancer cell proliferation and invasiveness. At the molecular level, the Sig1R modulates the activity of various ion channels, apparently through a direct interaction. We have previously shown using atomic force microscopy imaging that the Sig1R binds to the trimeric acid-sensing ion channel 1A with 3-fold symmetry. Here, we investigated the interaction between the Sig1R and the Nav1.5 voltage-gated Na(+) channel, which has also been implicated in promoting the invasiveness of cancer cells. We show that the Sig1R and Nav1.5 can be co-isolated from co-transfected cells, consistent with an intimate association between the two proteins. Atomic force microscopy imaging of the co-isolated proteins revealed complexes in which Nav1.5 was decorated by Sig1Rs. Frequency distributions of angles between pairs of bound Sig1Rs had two peaks, at ∼90° and ∼180°, and the 90° peak was about twice the size of the 180° peak. These results demonstrate that the Sig1R binds to Nav1.5 with 4-fold symmetry. Hence, each set of six transmembrane regions in Nav1.5 likely constitutes a Sig1R binding site, suggesting that the Sig1R interacts with the transmembrane regions of its partners. Interestingly, two known Sig1R ligands, haloperidol and (+)-pentazocine, disrupted the Nav1.5/Sig1R interaction both in vitro and in living cells. Finally, we show that endogenously expressed Sig1R and Nav1.5 also functionally interact.