Search

Purpose: The coronavirus disease 2019 (COVID-19) pandemic reshaped the usual risk: benefit equilibrium that became a trade-off between the infection exposure risk for the patient (and for staff) and the risk associated with delaying or cancelling the nuclear medicine examination. This study aimed at quantifying the impact of the first COVID-19 lockdown in France on nuclear medicine examination volume together with volume of examination cancellation and non-attendance., Methods: We retrospectively assessed the volume of planned examinations from 1 month before to 1 month after the first lockdown in French high-volume nuclear medicine departments (NMD) sharing the same information management system including both university hospitals, UH (n = 7), and cancer centres, CC (n = 2)., Results: The study enrolled 31,628 consecutive patients referred for a nuclear medicine examination performed or not (NMEP or NMEnP). The total volume of NMEP significantly dropped by 43.4% between the 4 weeks before and after the starting of the lockdown. The comparison of the percentage of NMEP and NMEnP between UH and CC is significantly different (p < 0.001). The percentage of NMEP during the study was 67.9% in UH vs 84.7% in CC. Percentages of NMEnP in UH and CC were due respectively to cancellation by the patient (14.9 vs 7.4%), cancellation by the NMD (9.5 vs 3.4%), cancellation by the referring physician (5.1 vs 4.4%) and non-attender patients (2.7 vs 0.2%)., Conclusion: The study underlines the public health issue caused by COVID-19 above the pandemic itself and should be useful in preparing for potential resource utilisation and staffing requirements., (© 2021. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Introduction: Selective Internal Radiation Therapy (SIRT) is used for the treatment of hepatic tumors. The aim of this retrospective study was to compare two dosimetric approaches based on 99m Tc-MAA SPECT/CT and 90 Y PET/CT, using Simplicit 90 Y™ versus the supplier suggested method of activity calculation., Material and Methods: A total of 19 patients underwent 21 SIRT after baseline angiography and 99mTc-MAA SPECT/CT, followed by 90Y PET/CT. Overlap between 99mTc-MAA and 90Y-microspheres was quantified with different thresholds isocontours. The perfused volume and tumor absorbed dose were estimated using Simplicit90Y™ based on SPECT/CT and PET/CT, then compared with the supplier suggested method. These data were related to overall survival to evaluate their prognostic impact., Results: The overlap between PET/CT and SPECT/CT was dependent on thresholds, decreasing with an increasing threshold. The overlap between the 99mTc-MAA and 90Y-microspheres biodistributions versus the tumor distribution on morphological imaging was suboptimal, in particular for small tumor volume. The tumor absorbed dose estimated after 90Y PET/CT was not different from tumor absorbed dose estimated after SPECT/CT. The Perfused lobe absorbed dose was significantly lower while the volume of the perfused lobe was significantly higher when estimated by Simplicit90Y™ compared to the supplier suggested conventional approach. A statistical parameter based on overlap between tumor and 90Y-microspheres distribution as well as tumoral dosimetry was significantly related to the overall survival., Conclusion: Post-treatment imaging remains paramount to estimate the irradiation dosimetry, due to an imperfect overlap. The perfused volume could be estimated from functional imaging, given its impact on dosimetry. Finally, survival seems related to tumoral overlap and dosimetry., (Copyright © 2020 The Authors. Published by Elsevier Masson SAS.. All rights reserved.)

Objective: Drug quality in medical devices is not evaluated during the marketing authorization of radiopharmaceuticals. Therefore, the extemporaneous change of packaging made for preparation of patient unit doses in a syringe is the responsibility of radiopharmacists. The present study aimed to determine the impact of packaging and storage in a polypropylene syringe on the quality of hydrophilic drugs [Tc]Tc-EDDA/HYNIC-TOC (Tektrotyd) and [Ga]Ga-DOTA-TOC (Somakit-TOC)., Methods: Appearance, pH, radiochemical purity, sterility, and endotoxin tests were performed according the current European Pharmacopoeia. Subvisible and visible particles tests of the European Pharmacopoeia were adapted due to limited preparation volume (<25 ml). Sorption tests were performed according to the literature., Results: After 2 h storage in a syringe, drug sorption of Tektrotyd and Somakit-TOC was of less than 2.5% and similar to other Tc-radiopharmaceuticals (range: from 1.1 ± 0.5% to 4.2 ± 0.6%). For Tektrotyd, this sorption phenomenon was positively influenced by the drug concentration and a short contact with the medical device (4.8 ± 0.2% up to 5 s vs. 2.3 ± 0.2%, n = 4; P < 0.001). For Somakit-TOC, the duration of contact with syringe had no impact (1.6 ± 0.2% up to 5 s vs. 1.7 ± 0.6%; P = 1.000). No drug radiolysis or alteration of microbiological aspects were observed. No impurity from a 3-piece-syringe was observed according to drug aspect, pH, and subvisible and visible particles, which remained within specification of the current European Pharmacopoeia., Conclusion: This study found that drug sorption to packaging was compatible with clinical use and absence of drug alteration of Tektrotyd and Somakit-TOC after repackaging in a syringe in polypropylene and prolonged storage during 2 h.

We present herein the preparation of novel polymer inclusion membranes (PIMs) containing insoluble β-CD polymer as a carrier, polyvinyl chloride as a base polymer, and dibuthylphtalate (DBP) as a plasticizer in varying proportions. The prepared PIMs can be obtained by a simple, fast, and high-yield preparation process. Physicochemical characterizations of such membranes occurred in a homogeneous structure. In addition, Fourier-transform infrared Spectroscopy (FT-IR) analysis found that DBP was inserted between these polymeric chains by non-covalent interactions. This led to a spacing of PVC/poly(β-cyclodextrin) chains inducing a better access of guest molecules to PIM cyclodextrins. To achieve the elimination of ibuprofen and progesterone, two examples of emerging environmental contaminants that can lead to possible alterations to aquatic environments and affect human health, the effect of three operating parameters was studied (pH, the proportion of β-cyclodextrin polymer, and wastewater agitation). The proportion of β-cyclodextrin polymer and wastewater agitation had a favorable influence on drug extraction at 10 ppm. The PIMs containing β-cyclodextrin polymer was unstable in basic conditions and was more effective at acidic pH. These initial results demonstrate the high potential for drug extraction of this polymer.

Objectives: Recent gallium-68 labeled peptides are of increasing interest in PET imaging in nuclear medicine. Somakit TOC® is a radiopharmaceutical kit registered in the European Union for the preparation of [68Ga]Ga-DOTA-TOC used for the diagnosis of neuroendocrine tumors. Development of a labeling process using a synthesizer is particularly interesting for the quality and reproducibility of the final product although only manual processes are described in the Summary of Product (SmPC) of the registered product. The aim of the present study was therefore to evaluate the feasibility and value of using an automated synthesizer for the preparation of [68Ga]Ga-DOTA-TOC according to the SmPC of the Somakit TOC®., Methods: Three methods of preparation were compared; each followed the SmPC of the Somakit TOC®. Over time, overheads, and overexposure were evaluated for each method., Results: Mean±SD preparation time was 26.2±0.3 minutes for the manual method, 28±0.5 minutes for the semi-automated, and 40.3±0.2 minutes for the automated method. Overcost of the semi-automated method is 0.25€ per preparation for consumables and from 0.58€ to 0.92€ for personnel costs according to the operator (respectively, technician or pharmacist). For the automated method, overcost is 70€ for consumables and from 4.06€ to 6.44€ for personnel. For the manual method, extremity exposure was 0.425mSv for the right finger, and 0.350mSv for the left finger; for both the semi-automated and automated method extremity exposure were below the limit of quantification., Conclusion: The present study reports for the first time both the feasibility of using a [68Ga]- radiopharmaceutical kit with a synthesizer and the limits for the development of a fully automated process., (Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.net.)

Cyclosporine (CsA) has a selective property of suppressing various T-lymphocyte functions. This is of utmost importance in preventing allograft rejection by several organ transplantations, as well as in the treatment of systemic and local autoimmune disorders. However, the poor water solubility of CsA can be a major hurdle for its absorption into the blood stream, which leads to low bioavailability and thus less efficacy. The aim of this study was to prepare, characterize, and evaluate in vitro as well as in vivo, the potential of the innovative CsA drug delivery system. The latter contains CsA in spherical amorphous solid dispersion (SASD) which is embedded in an original α-cyclodextrin and β-cyclodextrin polymer mixture (Poly-αβ-CD) as a multifunctional amorphous carrier. The new developed SASD formulation showed that CsA was molecularly dispersed in αβ-cyclodextrins in an amorphous form, as was confirmed by physicochemical characterization studies. Interestingly, the peptide secondary structure, and thus, the drug activity was not impacted by the preparation of SASD as was shown by circular dichroism. Furthermore, the in vitro CsA release profile kinetics was almost identical to the commercially available product Neoral ® . This study presents the first in vivo proof-of-concept for a novel drug delivery system based on Poly-αβ-CD containing CsA, with SASD allowing for increased bioavailibility. The pharmacokinetic parameters of cyclosporine A from the spherical spray-dried dispersion formulation was demonstrated in a "rat" animal model. For comparison, the commercially available Neoral® was studied. Importantly, the pharmacokinetic parameters were improved by extending T max from 2 to 3 h after the oral administration in rats, and eventually preventing the enterohepatic circulation. All these results clearly demonstrate the improved pharmacokinetic parameters and enhanced bioavailability of CsA in the new developed drug delivery system. These data demonstrated the superiority of the newly developed Poly-αβ-CD formulation for oral administration of the poorly soluble CsA in vivo without altering its secondary structure. Poly-αβ-CD can be a very useful tool for the oral administration of poorly water-soluble drugs.

In the present study, new polymer microspheres of amphotericin B (AmB) were prepared by a spray drying technique using cyclodextrin polymers (Poly-CD) to improve the solubility and dissolution of AmB, to prevent in vivo toxic AmB aggregations. Formulations were characterized through scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR), differential scanning calorimetry (DSC), thermal analysis, Raman spectroscopy, particle size, drug purity test and in vitro release studies. The analysis indicated that the chemical structure of AmB remained unchanged in the amorphous solid dispersion, but the structure was changed from crystalline to amorphous. AmB was completely release from such optimized formulations in dissolution media in 40 min. This work may contribute to a new generation of spherical amorphous solid dispersion using a cyclodextrin polymer, which has implications for the possibility of drug development for oral utilization or as powder aerosols for pulmonary administration.

Fractionated elution consists in collecting the fractions of an eluate with the highest radioactive concentration. It may be useful to meet the requirements of a subset of clinical radiopharmacy procedures. This study aims to describe and evaluate straightforward procedures allowing to readily perform fractionated elution on dry and wet columns Mo/Tc generators by using calibrated vials. The main objectives of this study consisted in determining the relationship between eluate volume and elution yield using different vials calibration and assessing repeatability of the procedure. Elution vials were calibrated to obtain different eluate volumes by addition of air for wet column generator (WCG) and subtraction of saline for dry column generator (DCG) (n≥5 for each calibration). The relationship between the eluate volume and the elution yield was determined by a regression model for both DCG and WCG. Then repeatability evaluation was performed using 3-ml vial calibration. Relationships between the eluate volume (V) and the elution yield (Y) for DCG and WCG were Y=57.551 ln(V)+10.526 and Y=50.256 ln(V)+17.597, respectively. For repeatability assessment (n=30 for DCG and n=31 for WCG), the median volume and the interquartile range for DCG and WCG were 2.98 ml (2.92-3.01) and 3.28 ml (2.71-3.40), respectively, and median (interquartile range) eluate yields were 84.73% (81.30-86.33) and 81.78% (78.91-85.20), respectively. The volume was significantly higher for WCG than DCG (P=0.036) and also significantly more variable (P<0.001). The elution yield was significantly lower for WCG than DCG (P=0.025), but no difference in variability between the two generators was found (P=0.874). Easy-to-handle fractionated elution methods are compatible with both DCG and WCG. Fractionation using calibrated vials exhibits a better reproducibility with DCG than WCG generators and represents the only proposed method so far to master fractionated elution with DCG.

Oral drug delivery remains the most physiological and therefore the most preferred, simplest and easiest administration route. Nevertheless, a multitude of potentially clinically important drugs will not reach the market or achieve their full potential unless their oral bioavailability is improved by formulation. The aim of this review is to present an overview of properties, formulation, excipients and characterization of solid dispersions corresponding to one of the different formulation strategies for design and development of poorly soluble drugs. This work will review and compare in detail the evolution of solid dispersions focused on the different methods of formulation and production of solid dispersions, their stability, their release properties, their pharmacokinetics and methods for their physicochemical characterization.

Despite the development of new antifungal, amphotericin B remains one of the most effective agents in the treatment of systemic fungal infections. Many patients exhibit nevertheless intolerance to amphotericin B at higher dosages and parenteral formulations present unlike per os ones, associated risks and high care cost. Free amphotericin B per os showed however an apparently poor absorption. In this study, we evaluate the potential of amphotericin B liposomes formulated with vegetal ceramides for oral administration. Ceramides, one of the constituents of cellular cytoplasmic membranes, constitute an important element in the construction and stability of their lipid bilayer. To fulfill this objective, vegetal ceramides, composed essentially of glucosylceramides, were firstly incorporated in various liposome preparations, entrapping or not amphotericin B, in comparison with phosphatidylcholine liposomes. Then, these preparations were introduced in an "Artificial-Stomach-Duodenum" model to improve their stability for oral administration. The formulation of amphotericin B liposomes containing ceramides presented a mean hydrodynamic size of about 200nm. We showed also that cholesterol and phospholipids are required to prevent drug leakage and to obtain lamellar structure respectively. In "Artificial-Stomach-Duodenum" model, ceramides conferred to liposomes better membrane stability. In addition, ceramides did not alter their drug encapsulation yield being by 75%. This could be explained by the fact that ceramides as we proved, limited the detergent effect of bile salts on liposome membranes., (Copyright © 2014 Elsevier B.V. All rights reserved.)

In neonates as well as in adults having swallowing difficulty, oral medication is given through a nasogastric tube making liquid formulations preferable. In this study, we present the high potential of nanometric emulsions formulated by spontaneous surfactant diffusion, as extemporaneous formulations of hydrophobic drug. Spironolactone used as hydrophobic drug model, was incorporated in oil before formulation at a concentration of 13.5mg/g oil. Then, all formulations were evaluated from pharmacotechnical and clinical standpoints, for their use in hospital or community pharmacy. The strength of this new liquid formulation lies on the simplicity, efficiency and reproducibility of their low energy process as on clinical aspects: high dose uniformity, facility to be administered through in nasogastric tube without any retention and a stability of 2 months at least compatible for an extemporaneous use. Moreover, this emulsion presented spironolactone content of 3.75 mg/ml among the most concentrated formulations published., (Copyright © 2014 Elsevier B.V. All rights reserved.)

The aim of this study was to describe and evaluate an approach for improving radiopharmaceutical supply chain safety by implementing bar code technology. We first evaluated the current situation of our radiopharmaceutical supply chain and, by means of the ALARM protocol, analysed two dispensing errors that occurred in our department. Thereafter, we implemented a bar code system to secure selected key stages of the radiopharmaceutical supply chain. Finally, we evaluated the cost of this implementation, from overtime, to overheads, to additional radiation exposure to workers. An analysis of the events that occurred revealed a lack of identification of prepared or dispensed drugs. Moreover, the evaluation of the current radiopharmaceutical supply chain showed that the dispensation and injection steps needed to be further secured. The bar code system was used to reinforce product identification at three selected key stages: at usable stock entry; at preparation-dispensation; and during administration, allowing to check conformity between the labelling of the delivered product (identity and activity) and the prescription. The extra time needed for all these steps had no impact on the number and successful conduct of examinations. The investment cost was reduced (2600 euros for new material and 30 euros a year for additional supplies) because of pre-existing computing equipment. With regard to the radiation exposure to workers there was an insignificant overexposure for hands with this new organization because of the labelling and scanning processes of radiolabelled preparation vials. Implementation of bar code technology is now an essential part of a global securing approach towards optimum patient management.

Inorganic nanomaterials based on heavy elements represent a new class of contrast agents for X-ray computed tomography (CT). Recent advances have shown that these materials are highly suited for CT imaging due to their high density and X-ray absorption capabilities. In this contribution, we demonstrated that tungsten oxide (WO3) nanoparticles coated by poly-ε-caprolactone (PCL) can be used as efficient contrast agent for CT imaging. The obtained particles were characterized by electron microscopy (TEM and SEM), and dynamic light scattering (DLS). We also validated their use for enhanced in vivo imaging, since these nanoparticles were observed to display high X-ray attenuation properties and circulation time (up to 3 h), permitting blood pool imaging., (Copyright © 2013 Elsevier Ltd. All rights reserved.)

This pioneer study in the domain of blood pool contrast media formulation presents the influence of poly-ɛ-caprolactone-monomethoxy poly(ethylene glycol) (PCL-mPEG) and oils on the formulation of polymeric nanoparticles by emulsion-solvent diffusion. The nature of the oil used had no influence on the encapsulation rate, even if particles were formulated with a mix of PCL/PCL-mPEG. It did, however, influence the particle size and polydispersity, with macroglycerides appearing to be the lipid structure best suited to obtain the smallest monodisperse particles. When we used PCL-mPEG to form a PEG-hydrated layer to surround the nanoparticles, its tension active property had a favorable effect on particle size and polydispersity. We also showed the strong deleterious effect on particle size and polydispersity when the polymer proportion was increased to over 1% (w/v) in the pre-emulsion organic phase. Conversely, increasing the oil proportion in this organic phase simply resulted in a slight to insignificant deleterious effect on size and polydispersity, enabling the oil proportion to be enhanced up to 3% (w/v). Finally, we showed the favorable combined effect of oil iodination and the presence of PCL-mPEG on particles formulated by emulsion-solvent diffusion leading to the preparation of smaller polymeric iodine-containing particles., (© 2013 Wiley Periodicals, Inc. and the American Pharmacists Association.)

Purpose: Synthesis and formulation of iodinated PCL-mPEG nanocapsules as new original blood pool contrast agents for computed tomography., Methods: PCL-mPEG was synthesized and formulated following the emulsion-solvent diffusion process, in the form of iodinated nanocapsules. Physico-chemical characterization of such nano-materials was performed by DLS and transmission electron microscopy. A stability study of the nanocapsules suspension was followed-up to 3 month. Blood biocompatibility was performed. Finally, the nanocapsules suspension radiopacity was evaluated in vitro then in vivo in mice as micro-CT contrast agent., Results: In this study, the iodine concentration in nanocapsules suspension was about 70 mgI/mL. Besides, these nanocarriers appeared non-toxic, and stable in suspension. In vivo, i.v. administration of 10 μL/g of mouse body weight of theses nano-particles induced a vascular contrast enhancement of 168 HU and a half-life in blood of 4.2 +/- 0.5 h. Elimination route of these particles appears mainly performed by the liver, without sequestration in spleen and lymph nodes confirming their stealth properties., Conclusions: This study proposes the first example of iodinated biodegradable polymeric blood pool contrast agent, able to induce an exploitable contrast enhancement. The main advantage of polymeric system compared to lipid ones, lies in their stability and handling, e.g. towards drying for storage.

Micro-computed tomography (micro-CT) is an emerging imaging modality, due to the low cost of the imagers as well as their efficiency in establishing high-resolution (1-100 μm) three-dimensional images of small laboratory animals and facilitating rapid, structural and functional in vivo visualization. However use of a contrast agent is absolutely necessary when imaging soft tissues. The main limitation of micro-CT is the low efficiency and toxicity of the commercially available blood pool contrast agents. This study proposes new, efficient and non-toxic contrast agents for micro-CT imaging. This formulation consists of iodinated vitamin E (α-tocopheryl 2,3,5-triiodobenzoate) as an oily phase, formulated as liquid nano-emulsion droplets (by low-energy nano-emulsification), surrounded by a hairy PEG layer to confer stealth properties. The originality and strength of these new contrast agents lie not only in their outstanding contrasting properties, biocompatibility and low toxicity, but also in the simplicity of their fabrication: one-step synthesis of highly iodinated oil (iodine constitutes 41.7% of the oil molecule weight) and its spontaneous emulsification. After i.v. administration in mice (8.5% of blood volume), the product shows stealth properties towards the immune system and thus acts as an efficient blood pool contrast agent (t(1/2) = 9.0 h), exhibiting blood clearance following mono-exponential decay. A gradual accumulation predominantly due to hepatocyte uptake is observed and measured in the liver, establishing a strong hepatic contrast, persistent for more than four months. To summarize, in the current range of available or developed contrast agents for preclinical X-ray imaging, this agent appears to be one of the most efficient., (Copyright © 2012 Elsevier Ltd. All rights reserved.)

This study presents new important aspects in the design of contrast agents for X-ray preclinical imaging. The first one is a new simple formulation of long circulating contrast agents, formulated from a commercial iodinated oil, and resulting in CT contrast agents containing more than twice the iodine concentration commercial contrast agents. The second point is a methodological aspect, utilizing tangential filtration for reducing the residual surfactants in the bulk phase and serving as well for concentrating droplets (and iodine) in the suspension. The last point is a more general aspect regarding the influence of the free surfactant on the pharmacokinetics and biodistribution of the nano-emulsion droplets on mice. We showed that cross-flow filtration is efficient for concentrating the droplets and reducing the concentration of free surfactant from 10wt.% to 1wt.%, without any changes in the nano-emulsion droplet morphologies or surface properties. We also showed that the presence of free surfactant has a significant impact on the elimination way of the nano-emulsion droplets, shared between liver and kidneys. The purified nano-emulsions are preferentially eliminated by the kidneys in contrast to raw nano-emulsions, predominantly eliminated by the liver. In practice, for two similar suspensions, half-life decreases from 4.1±1.10h to 2.5±0.77h before and after purification. Since the design and development of long circulating systems are critical in numerous domains, and not for preclinical CT imaging, this study presents important results in that field, taken under a formulation and technical point of view., (Copyright © 2012 Elsevier B.V. All rights reserved.)

(99m)Tc-macroaggregated albumin is widely used to diagnose pulmonary embolism. To control the radiochemical purity of this radiopharmaceutical, three rapid control methods using filter, thin layer chromatography or centrifugation, are described in the academic literature. In this paper, the interactions between impurities and (99m)Tc-macroaggregated albumin were presented. For each control method, the influence of these interactions on the determination of the radiochemical purity of labeled macroaggregated albumin was evaluated. Then, a comparison of radiochemical purity obtained by these three methods was performed in normal condition and with different addition of pertechnetate. Finally, a correlation between these three methods was investigated. The results show a specificity difference between these three control methods. However in practice, this difference has no impact on the evaluation of the radiochemical purity of (99m)Tc-macroaggregated albumin by these three methods. In additions, methods are still correlated with pertechnetate additions in (99m)Tc-macroaggregated albumin suspension. Thus, this study demonstrates that these three control methods are exchangeable in radiopharmacy.

The in vivo X-ray micro-computed tomography (micro-CT) is a very powerful and non-invasive tool used to establish high-resolution images with isotropic voxels in typical scan times ranging from minutes to tenths of minutes. This preclinical imaging technology is primarily adapted to visualize bones. X-ray imaging of soft tissues is made possible by using opaque compounds, providing contrast through tissue vascularization. Thus, using control agents with a long-lasting time in the blood, active or passive targeting of soft tissue is made possible in small animals. In this respect, the use of hydrophilic iodinated X-ray contrast media remains limited due to their rapid blood clearance, albeit at a slightly slower pace in humans as compared with rodents. The development of an iodinated contrast medium with increased vascular residence time is thus necessary. This is precisely the scope of the present paper, which will review and compare in detail the different vectors used as long-circulating iodinated contrast agents for micro-CT, i.e. liposomes, nanoemulsions, micelles, dendrimers and other polymeric particles. The discussion is focused, for each of these nanoparticulate systems, on their method of formulation and production, their stability properties, encapsulation properties, release properties, pharmacokinetics, and toxicology. The different aspects relative to the adaptation of these properties and physico-chemical characteristics for blood pool contrast agents aimed at angiographic micro-CT applications are also discussed. The aim of this review is to propose an overview into the formulation and properties of iodinated micro-CT contrast agents for preclinical applications., (2010 Elsevier Ltd. All rights reserved.)