Search

Traditonal linear oscillators, such as cantilevers or pendulums, are only sensitive to specific resonant frequencies. They have then very narrow frequency bandwidths when harvesting energy from ocean waves. In order to enhance the dynamic performance of the wave energy converters (WECs), used to expand the autonomy of Lagrangian Drifters, a statically balanced compliant mechanism (SBCM) is investingated. It is based on finite element analysis (FEA) simulaitons. The design of the SBCM is introduced and its static force-displacement curve is obtained in FEA. The dynamic response of the SBCM to harmonic base excitiaons at low frequencies and low accelerations is investigated based on time-domian FEA simulations. The close agreement between simulations, numerial and analytical results verifies that the SBCM is sensitive to ultra-low frequencies with weak accelerations in a wide frequency range. The applicability of the SBCM in WECs is demonstrated by adding PVDF films in the FEA model. In the time-domian simulation, the SBCM-based WEC is excited by the drifter motion pattern obtained from Orcaflex and corresponding to two typical ocean waves (i.e. synthesized Airy and Jonswap models). Relative displacement between the base and mass and the electric outputs are obtained. According to this work, the SBCM provides a structural solution for WECs with enhanced energy harvesting performance.

Piezoelectric energy harvesters (PEHs) promote the construction of a smarter world through powering electric devices with energy scavenged from environmental vibrations by means of piezoelectric effect. To enable the piezoelectric effect, piezoelectric materials are usually attached to mechanical structures (e.g. flexible beams) that can deform due to mechanical vibration and produce strain in piezoelectric material. The mechanical structure for energy harvesting in nature is a Compliant Mechanism (CM). A large variety of structural solutions have been proposed aiming to expend the working frequency range and maximizing the energy output of PEHs. To advance PEHs, a comprehensive review on existing structural solutions and materials is necessary. According to structural characteristics of current PEHs from the aspect of CMs, designs in state of the art are analyzed and categorized into five configurations, mono-stable, multi-stable, multi-degrees-of-freedom, frequency up-conversion and stress optimization. For each configuration, working principles and compatibilities with miniaturization to MEMS scale are analyzed and assessed. Additionally, several CMs are first proposed for PEHs in different configurations as inspirations and references to prompt the development of PEHs. Piezoelectric materials are also important factors in enhancing the energy harvesting performance. Characters of several widely adopted piezo-materials are summarized and compared. The metric of Normalized Power Density (NPD) is introduced to compare and assess the energy generation capability of PEHs with several widely-used piezoelectric materials and in different scales. A NPD-Volume graph is first presented based on the data collected in literature. It shows that PEHs with PZT have the highest NPD and stable energy generation performance in a wide volume range. Both the structural categorization and NPD-Volume graph provide guidance and reference for design and optimization of PEHs.