Search

The motion of nanomotors triggered by light sources will provide new alternative routes to power nanoarchitectures without the need of chemical fuels. However, most light-driven nanomotors are triggered by UV-light, near infrared reflection, or laser sources. It is demonstrated that nanocap shaped Au/TiO2 nanomotors (175 nm in diameter) display increased Brownian motion in the presence of broad spectrum visible light. The motion results from the surface plasmon resonance effect leading to self-electrophoresis between the Au and TiO2 layers, a mechanism called plasmonic photocatalytic effect in the field of photocatalysis. This mechanism is experimentally characterized by electron energy loss spectroscopy, energy-filtered transmission electron microscopy, and optical video tracking. This mechanism is also studied in a more theoretical manner using numerical finite-difference timedomain simulations. The ability to power nanomaterials with visible light may result in entirely new applications for externally powered micro/nanomotors. [ABSTRACT FROM AUTHOR]

Specimen and stage drift as well as scan distortions can lead to a mismatch between true and desired electron probe positions in scanning transmission electron microscopy (STEM) which can result in both linear and nonlinear distortions in the subsequent experimental images. This problem is intensified in STEM spectrum and diffraction imaging techniques owing to the extended dwell times (pixel exposure time) as compared to conventional STEM imaging. As a consequence, these image distortions become more severe in STEM spectrum/diffraction imaging. This becomes visible as expansion, compression and/or shearing of the crystal lattice, and can even prohibit atomic resolution and thus limits the interpretability of the results. Here, we report a software tool for post-correcting the linear and nonlinear image distortions of atomically resolved 3D spectrum imaging as well as 4D diffraction imaging. This tool improves the interpretability of distorted STEM spectrum/diffraction imaging data. [ABSTRACT FROM AUTHOR]

Constructing 3D carbon structures built from carbon nanotubes (CNTs) and graphene has been considered as an effective approach to achieve superior properties in energy conversion and storage because of the synergistic combination of the advantages of each building block. Herein, a facile solid-state growth strategy is reported for the first time to fabricate highly nitrogen doped CNT-graphene 3D nanostructures without the necessity to use chemical vapor deposition. As cathode hosts for lithium-sulfur batteries, the hybrid architectures exhibit reversible capacities of 1314 and 922 mAh g−1 at 0.2 and 1 C, respectively, and a capacity retention of 97% after 200 cycles at a high rate of 2 C, revealing their great potential for energy storage application. [ABSTRACT FROM AUTHOR]

We report on the synergy between catalytic propulsion and mesoporous silica nanoparticles (MSNPs) for the design of Janus nanomotors as active cargo delivery systems with sizes <100 nm (40, 65, and 90 nm). The Janus asymmetry of the nanomotors is given by electron beam (e-beam) deposition of a very thin platinum (2 nm) layer on MSNPs. The chemically powered Janus nanomotors present active diffusion at low H2O2 fuel concentration (i.e., <3 wt %). Their apparent diffusion coefficient is enhanced up to 100% compared to their Brownian motion. Due to their mesoporous architecture and small dimensions, they can load cargo molecules in large quantity and serve as active nanocarriers for directed cargo delivery on a chip. [ABSTRACT FROM AUTHOR]

We show that 3 nm wide cobalt-iron alloy nanowires can be synthesized by simple wet chemical electroless deposition inside tubular Tobacco mosaic virus particles. The method is based on adsorption of Pd(II) ions, formation of a Pd catalyst, and autocatalytic deposition of the alloy from dissolved metal salts, reduced by a borane compound. Extensive energy-filtering TEM investigations at the nanoscale revealed that the synthesized wires are alloys of Co, Fe, and Ni. We confirmed by high-resolution TEM that our alloy nanowires are at least partially crystalline, which is compatible with typical Co-rich alloys. Ni traces bestow higher stability, presumably against corrosion, as also known from bulk CoFe. Alloy nanowires, as small as the ones presented here, might be used for a variety of applications including high density data storage, imaging, sensing, and even drug delivery. [ABSTRACT FROM AUTHOR]

First experiments using a new energy‐filtering microscope (Sub‐eV‐Sub‐Å microscope, or SESAM) are shown. They make use of the high transmissivity of the 90° filter. This allows the mapping of chemical bonding of large specimen areas, even if narrow energy selecting slits are used. Because large scattering angles are accepted by this filter, energy‐filtered diffraction patterns extending to 150 mrad can be recorded by a single exposure. This can be used to determine the reduced density function of amorphous materials and reduces the exposure time of the investigated area by three orders of magnitude as compared with previous approaches. [ABSTRACT FROM PUBLISHER]