Search

The aim of this study was to evaluate if adhesion technology with CAD/CAM can compensate for the reduction of occluso cervical preparation heights using different types of dental cement. The de-bonding failure types were then assessed. Here, 72 caries-free extracted human premolar teeth were prepared to have a remaining occlusal height of two, three, and four mm. IPS e.max lithium disilicate CAD/CAM crowns were cemented with adhesive resin cement Panavia SA, self-adhesive resin cement, RelyX Unicem Aplicap, and zinc phosphate cement. The cementation techniques were based on the manufacturer’s instructions. After thermocycling, all samples were tested for tensile bond strength via an Instron machine. One-way analysis of variance (ANOVA) with post hoc testing (P < 0.05) was performed. The means TBS for the two, three, and four-mm OCHP groups were 2.72±0.69, 3.06±0.82, and 3.25±0.79.0 MPa; ARC, SARC, and ZPC were 3.41±0.51, 3.45±0.41, 2.08±0.35 MPa, respectively with significant differences in both. The mixed cement had failures in the resin cement groups. Failure was predominantly cohesive in the zinc phosphate group. Resin cement had the highest SBS values versus ZPC values when both bonded to lithium disilicate crowns with different occlusal heights. The failure of the adhesive to the crown and/or to the tooth were the highest for the four types of resin cement. Around 25% were cohesive failures with resin cement, but this was predominately adhesive in crowns in zinc phosphate regardless of the preparation heights.

Aim and objective To evaluate the effect of cervical margin relocation (CMR) for crowns designed using CAD/CAM technology and fabricated from lithium disilicate (e.max, CAD) before and after aging; and to compare the fracture forces and failure type of the tested crowns. Materials and methods Mesio-occluso-distal(MOD) cavities 1 mm above the cementoenamel junction(CEJ) were prepared on 40 maxillary first premolars. The teeth were divided into four groups. In group A, all cervical margins (CM) were located 1 mm above the CEJ. However, in both mesial and distal proximal boxes of groups B, C, and D, in addition to the MOD cavities, the CMs were extended 2 mm on both sides below the CEJ apically to simulate the CMR technique. In group B, the mesial and distal proximal boxes were filled with flowable composite, while for group C and group D, specimens were filled with composite resin fillings. To simulate the CMR technique, the cavities were filled with composite layers of 3 mm in two increments. Using the CAD/CAM system, 40 standard crowns were prepared on premolars, then cemented using a dual-curing adhesive cement. Assessments of the marginal integrity of interfaces of the proximal boxes of the cemented crowned teeth were recorded. Statistical differences between groups were analyzed using the ANOVA and Bonferroni's posthoc test. Results The first null hypothesis was accepted since no statistically significant differences were found in marginal integrity before and after aging (p>0.05), while the second was partially rejected since different fractured force values were recorded and a significant difference was detected between group D and group B. The third hypothesis was rejected because the catastrophic fracture rate was the highest among the four groups. Conclusion The implementation of CMR before and after aging had a good effect on the marginal integrity of CM relocation. The CMR technique with resin luting cement of lithium disilicate crowns is effective and recommended for the restoration in deep proximal boxes of premolars or posterior teeth. Clinical significance CAD/CAM-generated e. max all-ceramic crowns with composite as the CMR enable the reconstruction of severely destroyed teeth irrespective of the position of the cavity margins.

AIM The current study aims to address the patient's dental anxiety (DA) And dental fear (DF) under the treatment of a general practitioner (GP) among different parameters. MATERIALS AND METHODS The cross-sectional study included 500 patients recruited from different clinics in Jazan, Saudi Arabia. Data were collected through a questionnaire-based form consisting of three parts; the first part was personal and demographic questions whereas the second and third parts were a modified dental anxiety scale (MDAS) and a dental fear survey (DFS) to measure DA and DF among patients. Spearman's correlation was used to measure the relation between DA and DF as well as Chi-square tests and logistic regression analyses for analyzing the effect of each variable on DA and DF. RESULTS All patients fulfilled their eligibility criteria. A high percentage was found in moderate anxiety (36.8%) as well as in moderate fear (46.2%) among different anxiety and fear scales. The association between DA and DF was positively significant (p

BACKGROUND This spectrophotometric study assessed the color stability of CAD/CAM restorative materials with different exposed surfaces following staining by hot Arabic Qahwa and cold coffee. MATERIAL AND METHODS Ninety-six specimens were fabricated from 3 different CAD/CAM ceramic materials: Vita Suprinity (Vita-S), Vita Enamic (Vita-E), and Vitablocs Mark II (Vitablocs-MII). We divided 32 specimens for each group into glazed or polished surfaces, with 16 specimens in each group, then subdivided them according to staining materials: Arabic Qahwa and Frappuccino Cold Coffee. Color of specimens was measured during immersion in staining materials (BEFORE) as baseline with (Vita classic) and (L, a, b), for average color changes (ΔE₀₀), then remeasured after 2, 4, and 12 weeks, and described as 1st, 2nd, and 3rd measurements for VITAPAN Classic shade and T1, T2, and T3 for ΔE00 values using the CIE L*a*b* equation. We performed ANOVA and then post hoc testing. RESULTS We found significant differences in ΔE₀₀ values during immersing in hot Arabic Qahwa and cold coffee for tested materials in glazed or polished specimens. Polished specimens of Vita-S and Vita-E had the highest color changing and staining compared to glazed surfaces. Vitablocs-MII had the best color stability through immersion periods. Moreover, there were changes in relation to VITAPAN Classic shade guide for both Vita-S and Vita-E specimens during different immersion periods. CONCLUSIONS Coffee caused staining and contamination of ceramic material. Values of ΔE₀₀ for tested ceramic materials were significantly different but were within the clinically acceptable range. Polished specimens showed higher staining; therefore, we highly recommend re-glazing of ceramic restorations to maintain color stability.

The current study aims to address the patient's dental anxiety (DA) And dental fear (DF) under the treatment of a general practitioner (GP) among different parameters.The cross-sectional study included 500 patients recruited from different clinics in Jazan, Saudi Arabia. Data were collected through a questionnaire-based form consisting of three parts; the first part was personal and demographic questions whereas the second and third parts were a modified dental anxiety scale (MDAS) and a dental fear survey (DFS) to measure DA and DF among patients. Spearman's correlation was used to measure the relation between DA and DF as well as Chi-square tests and logistic regression analyses for analyzing the effect of each variable on DA and DF.All patients fulfilled their eligibility criteria. A high percentage was found in moderate anxiety (36.8%) as well as in moderate fear (46.2%) among different anxiety and fear scales. The association between DA and DF was positively significant (There is a positive relation between MDAS and DFS, thus the DA affects the DF. Female patients had a lower DA and DF than male patients. Furthermore, the government clinics had the highest DA and DF prevalence levels for patients. Moreover, the high school-graduated patients seem to have a high DA and DF vs other patient educational levels.It would be beneficial to include an educational training program about psychological patient management in the study curriculum as well as to be offered as a special course to newly graduated dentists. This modification will aid to improve the GPs to get rid of DA and DF patients. How to cite this article: AlDhelai TA, Al-Ahmari MM, Adawi HA

WHO estimates that the global number of tobacco users exceeds 1.3 billion people. Few studies have examined the effect of locally made smokeless tobacco (ST) products on the color changes of material used in dental prosthetics. Bearing the recent advances in CAD/CAM ceramic restorations material in mind, this study aimed to assess ST influence on mean color change (∆E*) values among selected CAD/CAM ceramic types: multilayer zirconia (Ceramill Zolid PS), zirconia-reinforced lithium silicate ceramic (Vita Suprinity), and feldspathic (Vita TriLuxe) restorative materials. The color changes of the ceramics were compared to VITA classical and VITA 3D-MASTER shade guides. Sixty CAD/CAM ceramic specimens (20 samples each) were fabricated from Ceramill Zolid PS, Vita TriLuxe Forte, and VITA Suprinity. Specimens were prepared and divided into two groups according to the ST type and immersed for two weeks. Basic VITA classical and VITA 3D-MASTER colors were recorded at a baseline of one week and two weeks. The highest ∆E* values were recorded in the black ST for Vita Suprinity (4.77) in the first week, followed by Vita TriLuxe (4.07) in the second week. For white ST, Vita TriLuxe (4.87), and Vita Suprinity (4.42) showed extensive color change after two weeks and one week, respectively. The color change was least in zirconia for black and white ST after one week. CAD/CAM ceramic materials showed no significant difference after 1 and 2 weeks for the tested ST types. The effects of ST on CAD/CAM ceramic material (∆E* values) were high but did not reach clinically unacceptable values. Zirconia showed the least amount of color change among all the tested materials.

The purpose of this article is to compare the larger (8 × 10-mm single implant and 15 × 20-mm multiple implant) lateral window designs used in the sinus elevation procedure with a newly proposed, less-invasive window design and discuss the advantages and limitations of the new design. The less-invasive window designs differ from the larger window designs in both the size and shape of lateral windows. Following creation of a round-window osteotomy, the quality of the sinus membrane and its ability to be elevated are assessed. The initial window can then be enlarged as a vertical oval window for a single implant or a horizontal oval window for multiple implants. The advantages of these window designs include the preservation of the lateral walls, blood supply to bone grafts, and better containment of the graft material. The limitations of these window designs are decreased visibility, accessibility for correcting a membrane perforation, and access for draining a sinus infection if one occurs. These complications necessitate increasing the size of the window as needed for successful treatment. The proposed less-invasive window design provides distinct advantages for a successful sinus elevation procedure and decreased patient morbidity.

The aim of this report is to present a case with a 10-year follow-up of a single anterior tooth dental implant replacement with a xenogenous bone graft in a patient with a large bone defect associated with a cleft lip and palate. At 10 years postloading, the implant was healthy and well-integrated. Although the implant restoration appeared slightly intruded due to growth and development at that time, the patient was happy with the esthetic result and refused corrections of the uneven occlusal plane.