Search

2D-Metal organic frameworks (2D-MOFs) materials can be subjected to various modes of mechanical stresses and strains in a wide range of applications, for which their mechanical properties are critical to reach practical implementations. Despite the rapid developments focused on the preparation of ultrathin 2D-MOF materials, very little is known about their mechanical and degradation behavior. Here, we introduce the Langmuir–Blodgett (LB) technique, combined with interfacial rheology, as a novel in situ method for direct determination of the in-plane Young's modulus by simultaneously measuring the 2D shear and compression moduli of a 2D-MOF formed at the air-water interface. Furthermore, it can be used to evaluate mechanistic models describing the degradation kinetics of 2D MOFs. To provide a deeper understanding of the factors that determine the Young’s modulus observed in such a set up, we carried out nanoindentation measurements and molecular dynamics (MD) simulations based on classical force fields. This protocol allows us to gain mechanistic insights into the impact of structural defects, temperature, tensile and compression stress on the Young’s modulus of 2D MOFs.

The electronic, optical, and magnetic properties of graphene nanoribbons (GNRs) can be engineered by controlling their edge structure and width with atomic precision through bottom-up fabrication based on molecular precursors. This approach offers a unique platform for all-carbon electronic devices but requires careful optimization of the growth conditions to match structural requirements for successful device integration, with GNR length being the most critical parameter. In this work, the growth, characterization, and device integration of 5-atom wide armchair GNRs (5-AGNRs) are studied, which are expected to have an optimal bandgap as active material in switching devices. 5-AGNRs are obtained via on-surface synthesis under ultrahigh vacuum conditions from Br- and I-substituted precursors. It is shown that the use of I-substituted precursors and the optimization of the initial precursor coverage quintupled the average 5-AGNR length. This significant length increase allowed the integration of 5-AGNRs into devices and the realization of the first field-effect transistor based on narrow bandgap AGNRs that shows switching behavior at room temperature. The study highlights that the optimized growth protocols can successfully bridge between the sub-nanometer scale, where atomic precision is needed to control the electronic properties, and the scale of tens of nanometers relevant for successful device integration of GNRs.

Two-dimensional covalent organic frameworks (2D COFs) have attracted attention as versatile active materials in many applications. Recent advances have demonstrated the synthesis of monolayer 2D COF via an air–water interface. However, the interfacial 2D polymerization mechanism has been elusive. In this work, we have used a multiscale modeling strategy to study dimethylmethylene-bridged triphenylamine building blocks confined at the air–water interface to form a 2D COF via Schiff-base reaction. A synergy between the computational investigations and experiments allowed the synthesis of a 2D-COF with one of the linkers considered. Our simulations complement the experimental characterization and show the preference of the building blocks to be at the interface with a favorable orientation for the polymerization. The air–water interface is shown to be a key factor to stabilize a flat conformation when a dimer molecule is considered. The structural and electronic properties of the monolayer COFs based on the two monomers are calculated and show a semiconducting nature with direct bandgaps. Our strategy provides a first step toward the in silico polymerization of 2D COFs at air–water interfaces capturing the initial steps of the synthesis up to the prediction of electronic properties of the 2D material.

From synthesis through storage to disposal, contact lenses (CLs) interact with different system environments throughout their functional life cycle. To fulfill their therapeutic purpose, they need to exhibit a distinct behavior in each of them, which is achieved through a combination of different material functions. As such, CL materials are a showcase of highly advanced and mass-produced multifunctional biomaterials. Their great relevance and long history mean that a vast amount of work has gone into the implementation of ever more advanced functions. From understanding the approaches used to achieve multifunctionality in CLs, a lot of inspiration for the design of other multifunctional medical devices can be drawn. Therefore, here, we provide a systematic overview of the different functions that are combined in today\'s CL materials, together with their quantification methods, chemical design principles and fabrication techniques. We further provide an outlook on the functions that are currently under investigation for the next generation of commercial CLs.

The development of synthetic two-dimensional crystalline polymers (2DCPs), such as 2D covalent-organic polymers and 2D metal-organic polymers, is receiving increasing attention due to their intriguing chemistry and unique properties, as well as potential role in wide ranging applications, such as electronics, sensing, catalysis, separation, and energy storage and conversion. Complementary to the top-down exfoliation towards the preparation of 2DCPs, bottom-up interface-assisted synthesis is advantageous in the 2D dynamic arrangement of the molecules or precursors, offering the chance to generate ultra-thin structures with large lateral sizes. This article provides guidelines on the preparation of free-standing, single-layer, or multi-layer 2DCPs via liquid-interface-assisted synthesis, mainly involving polymerization at the air–water and liquid–liquid interfaces, as well as the Langmuir-Blodgett method. Insight into the advantages and challenges of synthesis strategies and chemistry methodologies are provided for the future development of interfacial synthesis of 2DCPs with diverse structural and functional control.

Angewandte Chemie / International edition International edition 59(15), 6028 - 6036 (2020). doi:10.1002/anie.201915217, Single‐layer and multi‐layer 2D polyimine films have been achieved through interfacial synthesis methods. However, it remains a great challenge to achieve the maximum degree of crystallinity in the 2D polyimines, which largely limits the long‐range transport properties. Here we employ a surfactant‐monolayer‐assisted interfacial synthesis (SMAIS) method for the successful preparation of porphyrin and triazine containing polyimine‐based 2D polymer (PI‐2DP) films with square and hexagonal lattices, respectively. The synthetic PI‐2DP films are featured with polycrystalline multilayers with tunable thickness from 6 to 200 nm and large crystalline domains (100–150 nm in size). Intrigued by high crystallinity and the presence of electroactive porphyrin moieties, the optoelectronic properties of PI‐2DP are investigated by time‐resolved terahertz spectroscopy. Typically, the porphyrin‐based PI‐2DP 1 film exhibits a p‐type semiconductor behavior with a band gap of 1.38 eV and hole mobility as high as 0.01 cm2 V−1 s−1, superior to the previously reported polyimine based materials., Published by Wiley-VCH, Weinheim

Recent progress in the on-surface synthesis of graphene nanoribbons (GNRs) has given access to atomically precise narrow GNRs with tunable electronic band gaps that makes them excellent candidates for room-temperature switching devices such as field-effect transistors (FET). However, in spite of their exceptional properties, significant challenges remain for GNR processing and characterization. This contribution addresses some of the most important challenges, including GNR fabrication scalability, substrate transfer, long-term stability under ambient conditions and ex situ characterization. We focus on 7- and 9-atom wide armchair graphene nanoribbons (i.e, 7-AGNR; and 9-AGNR) grown on 200 nm Au(111)/mica substrates using a high throughput system. Transfer of both, 7- and 9-AGNRs from their Au growth sub-strate onto various target substrates for additional characterization is accomplished utilizing a polymer-free method that avoids residual contamination. This results in a homogeneous GNR film morphology with very few tears and wrinkles, as examined by atomic force microscopy. Raman spectroscopy indicates no significant degradation of GNR quality upon substrate transfer, and reveals that GNRs have remarkable stability under ambient conditions over a 24-month period. The transferred GNRs are analyzed using multi-wavelength Raman spectroscopy, which provides detailed insight into the wavelength dependence of the width-specific vibrational modes. Finally, we characterize the optical properties of 7- and 9-AGNRs via ultra-violet-visible (UV-Vis) spectroscopy

Despite rapid progress in recent years, it has remained challenging to prepare crystalline two-dimensional polymers. Here, we report the controlled synthesis of few-layer two-dimensional polyimide crystals on the surface of water through reaction between amine and anhydride monomers, assisted by surfactant monolayers. We obtained polymers with high crystallinity, thickness of ~2 nm and an average crystal domain size of ~3.5 μm2. The molecular structure of the materials, their grain boundaries and their edge structures were characterized using X-ray scattering and transmission electron microscopy techniques. These characterizations were supported by computations. The formation of crystalline polymers is attributed to the pre-organization of monomers at the water–surfactant interface. The surfactant, depending on its polar head, promoted the arrangement of the monomers—and in turn their polymerization—either horizontally or vertically with respect to the water surface. The latter was observed with a surfactant bearing a carboxylic acid group, which anchored amine monomers vertically through a condensation reaction. In both instances, micrometre-sized, few-layer two-dimensional polyamide crystals were grown. It is difficult to prepare 2D polymers that are crystalline over large areas. Now, few-layer 2D polyimides and polyamides with good crystallinity on the micrometre scale have been synthesized on a water surface. A surfactant monolayer is used to organize amine monomers before their polymerization with anhydride moieties.

Mimicking synaptic plasticity: A free‐standing boronate ester‐linked 2D COF thin film has been achieved with record crystalline domain size as large as ≈60 μm2 via an interfacial synthesis method. This film was integrated into an organic thin film/Si nanowire‐based field effect transistor to mimic neuronal synapses capable of learning–erasing–forgetting memory process. Despite the recent progress in the synthesis of crystalline boronate ester covalent organic frameworks (BECOFs) in powder and thin‐film through solvothermal method and on‐solid‐surface synthesis, respectively, their applications in electronics, remain less explored due to the challenges in thin‐film processability and device integration associated with the control of film thickness, layer orientation, stability and crystallinity. Moreover, although the crystalline domain sizes of the powder samples can reach micrometer scale (up to ≈1.5 μm), the reported thin‐film samples have so far rather small crystalline domains up to 100 nm. Here we demonstrate a general and efficient synthesis of crystalline two‐dimensional (2D) BECOF films composed of porphyrin macrocycles and phenyl or naphthyl linkers (named as 2D BECOF‐PP or 2D BECOF‐PN) by employing a surfactant‐monolayer‐assisted interfacial synthesis (SMAIS) on the water surface. The achieved 2D BECOF‐PP is featured as free‐standing thin film with large single‐crystalline domains up to ≈60 μm2 and tunable thickness from 6 to 16 nm. A hybrid memory device composed of 2D BECOF‐PP film on silicon nanowire‐based field‐effect transistor is demonstrated as a bio‐inspired system to mimic neuronal synapses, displaying a learning–erasing–forgetting memory process., publishedVersion

A transmission electron microscopy study reveals grain boundaries and their formation mechanisms in 2D polymers., Two-dimensional (2D) polymers hold great promise in the rational materials design tailored for next-generation applications. However, little is known about the grain boundaries in 2D polymers, not to mention their formation mechanisms and potential influences on the material’s functionalities. Using aberration-corrected high-resolution transmission electron microscopy, we present a direct observation of the grain boundaries in a layer-stacked 2D polyimine with a resolution of 2.3 Å, shedding light on their formation mechanisms. We found that the polyimine growth followed a “birth-and-spread” mechanism. Antiphase boundaries implemented a self-correction to the missing-linker and missing-node defects, and tilt boundaries were formed via grain coalescence. Notably, we identified grain boundary reconstructions featuring closed rings at tilt boundaries. Quantum mechanical calculations revealed that boundary reconstruction is energetically allowed and can be generalized into different 2D polymer systems. We envisage that these results may open up the opportunity for future investigations on defect-property correlations in 2D polymers.