Search

ABSTRACT. The horizontal-to-vertical spectral ratio (HVSR) seismic method involves analyzing measurements of ambient seismic noise in three dimensions to determine the fundamental site resonance frequency. Resonance is excited by the [...]

A goal in urban water management is to reduce the volume of stormwater runoff in urban systems and the effect of combined sewer overflows into receiving waters. Effective management of stormwater runoff in urban systems requires an accounting of various components of the urban water balance. To that end, precipitation, evapotranspiration (ET), sewer flow, and groundwater in a 3.40‐hectare sewershed in Detroit, Michigan were monitored to capture the response of the sewershed to stormwater flow prior to implementation of stormwater control measures. Monitoring results indicate that stormflow in sewers was not initiated unless rain depth was 3.6 mm or greater. ET removed more than 40% of the precipitation in the sewershed, whereas pipe flow accounted for 19%–85% of the losses. Flows within the sewer that could not be associated with direct precipitation indicate an unexpected exchange of water between the leaky sewer and the groundwater system, pathways through abandoned or failing residential infrastructure, or a combination of both. Groundwater data indicate that groundwater flows into the leaky combined sewer rather than out. This research demonstrates that urban hydrologic fluxes can modulate the local water cycle in complex ways which affect the efficiency of the wastewater system, effectiveness of stormwater management, and, ultimately, public health. [ABSTRACT FROM AUTHOR]

This paper provides a literature review of methods successfully employed to characterize fine-grained and fractured or unfractured glacial deposits. Descriptions and examples are given for four major categories of characterization methods: physical, hydraulic, chemical, and indirect. Characterization methods have evolved significantly within the past ten years; however, there still exists uncertainty about the reliability of individual characterization methods applied to till deposits. Therefore, a combination of methods is best, the choice of which depends on the objectives of the work. Sampling methods, sampling scales, and reporting methods are extremely important and should be considered when interpreting and comparing results between sites. Recognition of these issues is necessary to ensure that decisions regarding the transport of fluids in fractured tills are not based on the assumption that poorly permeable tills are always an inhibitor of subsurface flow. OHIO J SCI 100 (3/4):73-87, 2000, INTRODUCTION Till-matrix materials composed of fine-grained silt and clay typically are of very low permeability; however, fractures within tills may significantly increase permeability. Transport of water and contaminants occurs in [...]

The Internet and the World Wide Web have revolutionized the way that many of us do business. Compared to the way ground water data were accessed and disseminated in 1990, [...]