Search

This study investigated the influence of fiber loading and maleated polyethylene (MAPE) coupling agent on the structural, thermal, mechanical, morphological properties, and torque rheology of high-density polyethylene (HDPE) reinforced with Posidonia oceanica fiber (POF) composites. HDPE/POF composites, both with and without MAPE, were manufactured using a two-step process: composite pellets extrusion, followed by test samples injection molding with various POF loadings (0, 20, 30, and 40 wt%). HDPE/POF composites reinforced with higher loading of POF (40 wt%) exhibit superior stiffness, better crystallinity, and higher stabilized torque and mechanical energy (Em) compared to other composite formulations. Therefore, varying the POF loading leads to extrusion and injection processing variations. Furthermore, the coupling agent significantly enhances the tensile strength, ductility, impact strength, crystallinity, stabilized torque, and Em of the HDPE/POF composite. This improvement is due to the enhanced interfacial adhesion between the POF and the HDPE matrix with the addition of the MAPE, as supported by the Scanning Electron Microscopy (SEM) micrographs. [ABSTRACT FROM AUTHOR]

In the present study, polyamide 6 reinforced with 30 wt% Glass fiber (PA6/GF30) used in automotive industry was reprocessed via injection molding. The virgin and recycled PA6/GF30 samples were characterized by chemical, rheological, mechanical, and morphological properties as a function of the number of processing cycles. After each reprocessing cycle, a decrement in mechanical properties in tensile, bending, and impact strength was revealed for different combination of cycle number (N0 [for the virgin PA6/GF30], N1 [for the first recycled PA6/GF30], N2 [for the second recycled PA6/GF30], and N3 [third recycled PA6/GF30 sample]) in the composite mixture. A simplex‐centroid mixture design (SCMD) was used to evaluate the effect of combining Ni (i=0,1,2) on the mechanical properties of composite samples for optimization. Graphical comparison of experimental results using regression models showed a high degree of correlation. Results revealed that the ternary N0N1N2 blends composite made up of 67.97 wt% N0, 23.13 wt% N1, and 8.89 wt% N2 exhibited the best mechanical properties. Furthermore, a good correlation between the scanning electron microscopy (SEM) observations and tensile test results was observed. Hence, the new reprocessed formulation presents a cost‐effective alternative of virgin PA6/GF30 for different engineering applications. [ABSTRACT FROM AUTHOR]