Search

Heat pumps become more and more popular heat source. They can be an alternative choice for obsolete coal fired boilers which are emissive and not ecological. During heat pump installation designing process, especially for heat pumps with higher heating capacity (for example those suppling larger buildings), a simulation of heat balance of ground heat source must be provided. A 3D heat transport model and groundwater flow in the geothermal heat source for heat pump (GSHP) installation was developed in FEFLOW according to Finite Element Modelling Method. The model consists of 25 borehole heat exchangers, arranged with spacing recommended by heat pump branch guidelines. The model consists of both a homogeneous, non-layered domain and a layered domain, which reflected differences in thermal properties of the ground and hydrogeological factors. The initial temperature distribution in the ground was simulating according to conditions typical for Europe in steady state heat flow. Optimal mesh refinement for nodes around borehole heat exchangers were calculated according to Nillert method. The aim of this work is to present influence of geological, hydrogeological factors and borehole arrangement in the energy balance and long term sustainability of the ground source. The thermal changes in the subsurface have been determined for a long term operation (30 years of operation period). Some thermal energy storage applications have also been considered.

The Centre of Sustainable Development and Energy Savings of the Faculty of Geology, Geophysics and Environmental Protection of AGH University of Science and Technology in Miekinia conducts research and educational activities in the field of renewable sources of energy, geothermal heat pumps especially. Growing interest in using the renewable energy sources (RES) is reflected upon the interest in such a discipline of studies. Many people declare intention of studying RES. This is a modern discipline, opened at AGH University of Science and Technology in 2003 as the first in Poland. Since 2012, when the Centre was open ca. 8000 people (including students, pupils, local governments and communities) were educated here. Not only geothermal energy is a main focus attention field. In the Centre other renewable sources of energy are also researched. This include solar energy (both photovoltaic and thermal), solid fuel boilers and wind energy. The Centre is heated by heat pumps with ground sources which are simultaneously use by students for practice and measurements. There are didactic heat pumps with temperature and pressure sensors and electric meters to be used by students during measurements. The Centre is in disposal of self-constructed Thermal Response Test device for thermal parameters measurements. In a stand for testing ground-source brine heat pumps for central heating and hot domestic water preparation research are conducted on the COP heat pump efficiency in accordance with the PN-EN 14511 standard. The Centre works on the prototyping of new, innovative heat pumps.

The aquifer thermal energy storage (ATES) has gained attention in several countries as an installation for increasing the energy efficiency of geothermal systems and the use of waste heat. The Lower Cretaceous reservoir is known as one of the most prospective for geothermal purposes in Poland. However, in the southern part of the Mogilno-Łódź Trough (Central Poland) is considered to have a lower geothermal potential. The aim of this paper is to study whether the Lower Cretaceous reservoir in this area is suitable for aquifer thermal energy storage. Prior to dynamic simulations in Feflow© software, a regional Petrel© static parametric model which includes a multidisciplinary approach was prepared. A methodology of fitting Petrel's structural and parametrical model to Feflow requirements is provided within this paper. The performance simulation of 4 systems has been conducted for 30 years. Increasing precipitation potential is expected for aragonite and calcite along with a temperature increase, while silica precipitation carries a much smaller risk. The paper presents potential for ATES systems in the Lower Cretaceous reservoir of the study area with the best doublet location having thermal recovery ratio of 0.47 and 0.34 for 30 and 40 K temperature differential scenario. An imbalance in heat injection/production in the storage system can cause the reservoir to cool faster than in conventional geothermal heating installation. ATES can provide a successful geothermal reservoir boosting in the case of applying a balanced injection of waste heat., (© 2021. The Author(s).)