Search

Ten years of terrestrial water storage anomalies from the Gravity Recovery and Climate Experiment (GRACE) were used to estimate high latitude snowfall accumulation using a mass balance approach. The estimates were used to assess two common gauge-undercatch correction factors (CFs): Legates climatology (CF-L) utilized in the Global Precipitation Climatology Project (GPCP), and Fuchs dynamic correction model (CF-F) used in the Global Precipitation Climatology Centre (GPCC) Monitoring product. The two CFs can be different by more than 50%. CF-L tended to exceed CF-F over northern Asia and Eurasia, while the opposite was observed over North America. Estimates of snowfall from GPCP, GPCC-L (GPCC corrected by CF-L), and GPCC-F (GPCC corrected by CF-F) were 62%, 64%, and 46% more than GPCC over northern Asia and Eurasia. GRACE-based estimate (49% more than GPCC) was the closest to GPCC-F. We found that as near surface air temperature decreases, the products increasingly underestimated the GRACE-based snowfall accumulation. Overall, GRACE showed that CFs are effective in improving GPCC estimates. Furthermore, our case studies and overall statistics suggest that CF-F is likely more effective than CF-L in most of the high latitude regions studied here. GPCP showed generally better skill than GPCC-L, which might be related to the use of satellite data or additional quality controls on gauge inputs to GPCP. This study suggests that GPCP can be improved if it employs CF-L instead of CF-F to correct for gauge undercatch. However, this implementation requires further studies, region-specific analysis, and operational considerations.

The constellation approach underpinning precipitation products such as the Integrated Multi‐satellitE Retrievals for GPM (IMERG) is key to achieving high resolution, but the use of data from multiple sources can unintentionally incorporate instrumental artifacts. Here, we introduce a machine learning–based anomaly detection scheme called SPEEDe, which processes a two‐dimensional precipitation field into a re‐estimated precipitation field that can be compared with the input. Large differences identify IMERG fields with bad orbit data, separating most of the bad cases from the good cases. When modified to process the passive microwave inputs, SPEEDe can pick out orbits with bad data, enabling quality control on these IMERG inputs. SPEEDe works by producing a locally realistic‐looking precipitation field when given unphysical data, which results in a larger‐than‐normal difference between the input and the output. SPEEDe is implemented as an automated quality control for GPM precipitation products. Plain Language Summary: A machine learning–based scheme, SPEEDe, has been developed to identify bad data in satellite precipitation products. This scheme is able to pick out precipitation maps that have unrealistic patterns better than a conventional approach based on the distribution of values. It can be run as the precipitation data are being produced, thus allowing for automated quality control. Avoiding manual intervention is important in computing quality‐controlled precipitation data in near‐real time for applications such as flood monitoring that require highly reliable data with minimal delay. Key Points: A machine learning scheme called SPEEDe can detect artifacts in satellite precipitation fields based on an aggregate grid‐wide scoreSPEEDe identifies bad data by modifying anomalous inputs substantially to produce realistic‐looking outputs, leading to a large scoreSPEEDe is being applied operationally in GPM data production for quality control [ABSTRACT FROM AUTHOR]

© 2015. American Geophysical Union. All Rights Reserved. The first issue of WRR appeared eight years after the launch of Sputnik, but by WRR's 25th anniversary, only seven papers that used remote sensing had appeared. Over the journal's second 25 years, that changed remarkably, and remote sensing is now widely used in hydrology and other geophysical sciences. We attribute this evolution to production of data sets that scientists not well versed in remote sensing can use, and to educational initiatives like NASA's Earth System Science Fellowship program that has supported over a thousand scientists, many in hydrology. We review progress in remote sensing in hydrology from a water balance perspective. We argue that progress is primarily attributable to a creative use of existing and past satellite sensors to estimate such variables as evapotranspiration rates or water storage in lakes and reservoirs and to new and planned missions. Recent transforming technologies include the Gravity Recovery and Climate Experiment (GRACE), the European Soil Moisture and Ocean Salinity (SMOS) and U.S. Soil Moisture Active Passive (SMAP) missions, and the Global Precipitation Measurement (GPM) mission. Future missions include Surface Water and Ocean Topography (SWOT) to measure river discharge and lake, reservoir, and wetland storage. Measurement of some important hydrologic variables remains problematic: retrieval of snow water equivalent (SWE) from space remains elusive especially in mountain areas, even though snow cover extent is well observed, and was the topic of 4 of the first 5 remote sensing papers published in WRR. We argue that this area deserves more strategic thinking from the hydrology community.

Geostationary satellites have provided routine, high temporal resolution Earth observations since the 1970s. Despite the long period of record, use of these data in climate studies has been limited for numerous reasons, among them that no central archive of geostationary data for all international satellites exists, full temporal and spatial resolution data are voluminous, and diverse calibration and navigation formats encumber the uniform processing needed for multisatellite climate studies. The International Satellite Cloud Climatology Project (ISCCP) set the stage for overcoming these issues by archiving a subset of the full-resolution geostationary data at ~10-km resolution at 3-hourly intervals since 1983. Recent efforts at NOAA's National Climatic Data Center to provide convenient access to these data include remapping the data to a standard map projection, recalibrating the data to optimize temporal homogeneity, extending the record of observations back to 1980, and reformatting the data for broad public distribution. The Gridded Satellite (GridSat) dataset includes observations from the visible, infrared window, and infrared water vapor channels. Data are stored in Network Common Data Format (netCDF) using standards that permit a wide variety of tools and libraries to process the data quickly and easily. A novel data layering approach, together with appropriate satellite and file metadata, allows users to access GridSat data at varying levels of complexity based on their needs. The result is a climate data record already in use by the meteorological community. Examples include reanalysis of tropical cyclones, studies of global precipitation, and detection and tracking of the intertropical convergence zone.

A new multiplatform multisensor satellite rainfall estimation technique is proposed in which sequences of Geostationary Earth Orbit infrared (GEO-IR) images are used to advect microwave (MW)-derived precipitation estimates along cloud motion streamlines and to further adjust the rainfall rates using local cloud classification. The main objective of the Rain Estimation using Forward-Adjusted advection of Microwave Estimates (REFAME) is to investigate whether inclusion of GEO-IR information can help to improve the advected MW precipitation rate as it gets farther in time from the previous MW overpass. The technique comprises three steps. The first step incorporates a 2D cloud tracking algorithm to capture cloud motion streamlines through successive IR images. The second step classifies cloudy pixels to a number of predefined clusters using brightness temperature (Tb) gradients between successive IR images along the cloud motion streamlines in combination with IR cloud-top brightness temperatures and textural features. A mean precipitation rate for each cluster is calculated using available MW-derived precipitation estimates. In the third step, the mean cluster precipitation rates are used to adjust MW precipitation intensities advected between available MW overpasses along cloud motion streamlines. REFAME is a flexible technique, potentially capable of incorporating diverse precipitation-relevant information, such as multispectral data. Evaluated over a range of spatial and temporal scales over the conterminous United States, the performance of the full REFAMEalgorithm compared favorably with products incorporating either no cloud tracking or no intensity adjustment. The observed improvements in root-mean-square error and especially in correlation coefficient between REFAME outputs and ground radar observations demonstrate that the new approach is effective in reducing the uncertainties and capturing the variation of precipitation intensity along cloud advection streamlines between MW sensor overpasses. An extended REFAME algorithm combines the adjusted advected MW rainfall rates with infrared-derived precipitation rates in an attempt to capture precipitation events initiating and decaying during the interval between two consecutive MW overpasses. Evaluation statistics indicate that the extended algorithm is effective to capture the life cycle of the convective precipitation, particularly for the interval between microwave overpasses in which precipitation starts or ends. © 2010 American Meteorological Society.

Visible and infrared data obtained from instruments onboard geostationary satellites have been extensively used for monitoring clouds and their evolution. The Advanced Baseline Imager (ABI) that will be launched onboard the Geostationary Operational Environmental Satellite-R (GOES-R) series in the near future will offer a larger range of spectral bands; hence, it will provide observations of cloud and rain systems at even finer spatial, temporal, and spectral resolutions than are possible with the current GOES. In this paper, a new method called Precipitation Estimation from Remotely Sensed information using Artificial Neural Networks-Multispectral Analysis (PERSIANN-MSA) is proposed to evaluate the effect of using multispectral imagery on precipitation estimation. The proposed approach uses a self-organizing feature map (SOFM) to classify multidimensional input information, extracted from each grid box and corresponding textural features of multispectral bands. In addition, principal component analysis (PCA) is used to reduce the dimensionality to a few independent input features while preserving most of the variations of all input information. The above method is applied to estimate rainfall using multiple channels of the Spinning Enhanced Visible and Infrared Imager (SEVIRI) onboard the Meteosat Second Generation (MSG) satellite. In comparison to the use of a single thermal infrared channel, the analysis shows that using multispectral data has the potential to improve rain detection and estimation skills with an average of more than 50% gain in equitable threat score for rain/no-rain detection, and more than 20% gain in correlation coefficient associated with rain-rate estimation. © 2009 American Meteorological Society.

Satellites bring opportunities to quantify precipitation amount and distribution over the globe, critical to understanding how the Earth system works. The amount and spatial distribution of oceanic precipitation from the latest versions (V07 and the previous version) of the Global Precipitation Measurement (GPM) Core Observatory instruments and selected members of the constellation of passive microwave sensors are quantified and compared with other products such as the Global Precipitation Climatology Project (GPCP V3.2); the Merged CloudSat, TRMM, and GPM (MCTG) climatology; and ERA5. Results show that GPM V07 products have a higher precipitation rate than the previous version, except for the radar-only product. Within ∼65°S–65°N, covered by all of the instruments, this increase ranges from about 9% for the combined radar–radiometer product to about 16% for radiometer-only products. While GPM precipitation products still show lower mean precipitation rate than MCTG (except over the tropics and Arctic Ocean), the V07 products (except radar-only) are generally more consistent with MCTG and GPCP V3.2 than V05. Over the tropics (25°S–25°N), passive microwave sounders show the highest precipitation rate among all of the precipitation products studied and the highest increase (∼19%) compared to their previous version. Precipitation products are least consistent in midlatitude oceans in the Southern Hemisphere, displaying the largest spread in mean precipitation rate and location of latitudinal peak precipitation. Precipitation products tend to show larger spread over regions with low and high values of sea surface temperature and total precipitable water. The analysis highlights major discrepancies among the products and areas for future research. [ABSTRACT FROM AUTHOR]

NASA's multisatellite precipitation product from the Global Precipitation Measurement (GPM) mission, the Integrated Multi-satellitE Retrievals for GPM (IMERG) product, is validated over tropical and high-latitude oceans from June 2014 to August 2021. This oceanic study uses the GPM Validation Network's island-based radars to assess IMERG when the GPM Core Observatory's Microwave Imager (GMI) observes precipitation at these sites (i.e., IMERG-GMI). Error tracing from the Level 3 (gridded) IMERG V06B product back through to the input Level 2 (satellite footprint) Goddard Profiling Algorithm GMI V05 climate (GPROF-CLIM) product quantifies the errors separately associated with each step in the gridding and calibration of the estimates from GPROF-CLIM to IMERG-GMI. Mean relative bias results indicate that IMERG-GMI V06B overestimates Alaskan high-latitude oceanic precipitation by +147% and tropical oceanic precipitation by +12% with respect to surface radars. GPROF-CLIM V05 overestimates Alaskan oceanic precipitation by +15%, showing that the IMERG algorithm's calibration adjustments to the input GPROF-CLIM precipitation estimates increase the mean relative bias in this region. In contrast, IMERG adjustments are minimal over tropical waters with GPROF-CLIM overestimating oceanic precipitation by +14%. This study discovered that the IMERG V06B gridding process incorrectly geolocated GPROF-CLIM V05 precipitation estimates by 0.1° eastward in the latitude band 75°N–75°S, which has been rectified in the IMERG V07 algorithm. Correcting for the geolocation error in IMERG-GMI V06B improved oceanic statistics, with improvements greater in tropical waters than Alaskan waters. This error tracing approach enables a high-precision diagnosis of how different IMERG algorithm steps contribute to and mitigate errors, demonstrating the importance of collaboration between evaluation studies and algorithm developers. Significance Statement: Evaluation of IMERG's oceanic performance is very limited to date. This study uses the GPM Validation Network to conduct the first extensive assessment of IMERG V06B at its native resolution over both high-latitude and tropical oceans, and traces errors in IMERG-GMI back through to the input GPROF-CLIM GMI product. IMERG-GMI overestimates tropical oceanic precipitation (+12%) and strongly overestimates Alaskan oceanic precipitation (+147%) with respect to the island-based radars studied. IMERG's GMI estimates are assessed as these should be the optimal estimates within the multisatellite product due to the GMI's status as calibrator of the GPM passive microwave constellation. [ABSTRACT FROM AUTHOR]