Search

Rationale Bulk stable isotope analysis (BSIA) of dissolved matter (e.g. dissolved organic carbon, total nitrogen bound (TNb), etc.) is of particular importance since this pool is a prime conduit in the cycling of N and C. Studying the two elemental pools is of importance, as transformation and transport processes of N and C are inextricably linked in all biologically mediated systems. No system able to analyze natural abundance stable carbon and nitrogen isotope composition in aqueous samples (without offline sample preparation) and simultaneously has been reported so far. Extension of the high-temperature combustion (HTC) system, to be capable of measuring TNb stable nitrogen isotope composition, is described in this study. Methods To extend the TOC analyzer to be capable of measuring TNb, modifications from the HTC high-performance liquid chromatography/isotope ratio mass spectrometry (HPLC/IRMS) interface were implemented and expanded. A reduction reactor for conversion of NOx into N2 was implemented into the new developed system. The extension addresses mainly the development of the focusing unit for nitrogen and a degassing device for online separation of TNb from molecular nitrogen (N2) prior to injection. Results The proof of principle of the system was demonstrated with different compound solutions. In this initial testing, the δ15NAIR-N2 values of the tested compounds were determined with precision and trueness of typically ≤0.5‰. Good results (u ≤ 0.5‰) could be achieved down to a TNb concentration of 40 mgN/L and acceptable results (u ≤ 1.0‰) down to 5 mgN/L. In addition, the development resulted in the first system reported to be suitable for simultaneous and direct δ13C and δ15N BSIA of aqueous samples. Conclusions The development resulted in the first system shown to be suitable for both δ13C and δ15N direct BSIA in aqueous samples. This system could open up new possibilities in SIA-based research fields. Copyright © 2016 John Wiley & Sons, Ltd.

RATIONALE: Traditionally, dissolved organic carbon (DOC) stable isotope analysis (SIA) is performed using either offline sample preparation followed by elemental analyzer/isotope ratiomass spectrometry (EA/IRMS) or a wet chemical oxidation (WCO)-based device coupled to an isotope ratio mass spectrometer. The first method is time-consuming and laborious. The second involves the risks of underestimation of DOC concentration and isotopic fractionation due to incomplete oxidation. The development of an analytical method for accurate and sensitive DOC SIA is described in this study. METHODS: A high-temperature combustion (HTC) system improves upon traditional methods. A novel total organic carbon (TOC) system, specially designed for SIA, was coupled to an isotope ratio mass spectrometer. An integrated purge and trap technique (peak focusing), flexible injection volume (0.05-3 mL), favorable carrier gas flow, modified ash crucible, new design of combustion tube and optimized drying system were used to achieve the necessary performance. RESULTS: The system can reliably measure concentrations up to 1000 mgC/L. Compounds resistant to oxidation, such as barbituric acid, melamine and humic acid, were analyzed with recovery rates of 100 +/- 1% proving complete oxidation. In this initial testing, the delta C-13 values of these compounds were determined with precision and trueness of CONCLUSIONS: The novel HTC system coupled to an isotope ratio mass spectrometer resulted in significantly improved sensitivity. The system is suitable for salt-containing liquids and compounds that are resistant to oxidation, and it offers a large concentration range. A second paper (which follows this one in this issue) will present a more comprehensive assessment of the analytical performance with a broad set of solutions and real samples. This highly efficient TOC stable isotopic analyzer will probably open up new possibilities in biogeochemical carbon cycle research. Copyright (C) 2014 John Wiley & Sons, Ltd.

Bulk stable isotope analysis (BSIA) of dissolved matter (e.g. dissolved organic carbon, total nitrogen bound (TNTo extend the TOC analyzer to be capable of measuring TNThe proof of principle of the system was demonstrated with different compound solutions. In this initial testing, the δThe development resulted in the first system shown to be suitable for both δ

The standard method for determining the 15N abundance of total dissolved nitrogen (TDN) in aqueous samples (e.g., soil leachate, sewage, urine) is currently Kjeldahl digestion followed by steam distillation or diffusion to isolate the ammonium, and then 15N measurement using IRMS. However, this technique is both time-consuming and laborious. One way of overcoming these disadvantages could be to couple a TOC analyser to determine the TDN with a sufficient quadrupole MS to determine the 15N abundance. The high TOC analyser (Elementar Analysensysteme Hanau, Germany), which catalytically oxidises the sample's total nitrogen with a high, constant yield to nitrogen monoxide (NO), appeared particularly suitable. The quadrupole-MS ESD 100 (InProcess Instruments Bremen, Germany) proved to be a suitable mass spectrometer for the 15N determination of NO. This combination of instruments was found to provide a workable method in numerous measurements of standard and actual samples. The detection limit concerning the N amount required per analysis is 2 microg, corresponding to an N concentration of 0.7 mg/l in a maximum sample volume of 3ml. Depending on the N concentration, 15N abundances starting from 0.5 at.% can be measured with the required precision of better than 3% (simple standard deviation). For example, measuring the abundance of 0.5 at.% requires about 50 microg N, whereas for 1 at.% or more only about 5 microg N is needed per analysis.

Traditionally, dissolved organic carbon (DOC) stable isotope analysis (SIA) is performed using either offline sample preparation followed by elemental analyzer/isotope ratio mass spectrometry (EA/IRMS) or a wet chemical oxidation (WCO)-based device coupled to an isotope ratio mass spectrometer. The first method is time-consuming and laborious. The second involves the risks of underestimation of DOC concentration and isotopic fractionation due to incomplete oxidation. The development of an analytical method for accurate and sensitive DOC SIA is described in this study.A high-temperature combustion (HTC) system improves upon traditional methods. A novel total organic carbon (TOC) system, specially designed for SIA, was coupled to an isotope ratio mass spectrometer. An integrated purge and trap technique (peak focusing), flexible injection volume (0.05-3 mL), favorable carrier gas flow, modified ash crucible, new design of combustion tube and optimized drying system were used to achieve the necessary performance.The system can reliably measure concentrations up to 1000 mgC/L. Compounds resistant to oxidation, such as barbituric acid, melamine and humic acid, were analyzed with recovery rates of 100 ± 1% proving complete oxidation. In this initial testing, the δ(13) C values of these compounds were determined with precision and trueness of ≤ 0.2‰ even with 3.5% salinity. Further tests with samples with low DOC concentrations resulted in LOQSIA method values of 0.5 mgC/L and 0.2 mgC/L for LOQSIA instr , considering an accuracy of ± 0.5‰ as acceptable.The novel HTC system coupled to an isotope ratio mass spectrometer resulted in significantly improved sensitivity. The system is suitable for salt-containing liquids and compounds that are resistant to oxidation, and it offers a large concentration range. A second paper (which follows this one in this issue) will present a more comprehensive assessment of the analytical performance with a broad set of solutions and real samples. This highly efficient TOC stable isotopic analyzer will probably open up new possibilities in biogeochemical carbon cycle research.