Search

Urinary excretion of uranium of 40 uranium miners was determined by the high-resolution inductively coupled mass spectrometry method. The concentration of uranium in the urine of the miners was converted to daily excretion of 238U either under the assumption that the daily urinary excretion is 1.6 l or daily urinary excretion of creatinine is 1.7 g and compared with the excretion of 238U calculated with a biokinetic model. Input data to the excretion model were derived from personal three- component ALGADE dosemeters, using the component for the estimation of inhalation of long-lived alpha radionuclides. Experimentally found contents of uranium in the urine of uranium miners are generally lower than the modelled ones, which means that the dosimetric approach is conservative. The uncertainty of inhalation intakes, derived from the measurements of filters from personal dosemeters, and the uncertainty of the concentration of uranium in the urine are discussed. [ABSTRACT FROM AUTHOR]

Uranium in the urine of 10 uranium miners (hewers), 27 members of general population and 11 family members of miners was determined by the High-Resolution ICP-MS method. Concentration of uranium in urine of the miners was converted to daily excretion of 238U under the assumption that the daily excretion of urine is 2 l and compared with the modelled excretion of 238U. Daily excretion of 238U was modelled using input data from personal dosemeters from a component for measurement of intake of long-lived alpha radionuclides. A reasonable agreement between evaluated and measured values was found. The uncertainty of inhalation intakes, derived from measurements of filters from personal dosemeters, and uncertainty of concentration of uranium in urine are discussed. [ABSTRACT FROM PUBLISHER]

Indoor radon concentrations are subject to diurnal and seasonal variations. In order to obtain an unbiased estimate of the annual mean radon concentration, measurements made over periods less than 12 months have to be adjusted accordingly. In this paper, hourly radon measurements from one uninhabited rural house in Telecí in the Czech Republic have been analysed. The data were collected over a period of 1 y. The behaviour of the radon concentration with time and its relationship with the outdoor temperature, wind speed and atmospheric pressure have been studied. Different estimates of the annual mean radon concentration based on short-term continuous measurements have been assessed. [ABSTRACT FROM PUBLISHER]

An overview of radon programme experience is presented. The paper summarises broad topics concerning radon issue: philosophy of radon policy, radon measurements strategies with respect to indoor radon variation, progress in radon measurement of an individual house (radon diagnosis), national programmes, the role of preventive measures and interventions with respect to existing and future exposure and knowledge of radon risk, problems of remediation strategies, radon mapping process and sense of delineation of radon prone areas, public awareness on radon issue and publicity campaign. Some research activities are proposed aiming at effective solutions for radon issues in the future. [ABSTRACT FROM AUTHOR]

Radon issue should be seen in the context of other human exposures and harms. The range of doses from the internal (inhalation and ingestion) and external exposure pathways is presented. Indoor radon regulation is compared with regulation of other natural exposures. [ABSTRACT FROM AUTHOR]

Abstract: The 137Cs specific activities (mean 32Bqkg−1) were determined in spruce bark samples that had been collected at 192 sampling plots throughout the Czech Republic in 1995, and were related to the sampling year. The 137Cs specific activities in spruce bark correlated significantly with the 137Cs depositions in areas affected by different precipitation sums operating at the time of the Chernobyl fallout in 1986. The ratio of the 137Cs specific activities in bark and of the 137Cs deposition levels yielded bark aggregated transfer factor Tag about 10.5×10−3 m−2 kg−1. Taking into account the residual specific activities of 137Cs in bark 20Bqkg−1 and the available pre-Chernobyl data on the 137Cs deposition loads on the soil surface in the Czech Republic, the real aggregated transfer factor after and before the Chernobyl fallout proved to be T*ag =3.3×10−3 m−2 kg−1 and T**ag =4.0×10−3 m−2 kg−1, respectively. The aggregated transfer factors T*ag for 137Cs and spruce bark did not differ significantly in areas unequally affected by the 137Cs fallout in the Czech Republic in 1986, and the figures for these aggregated transfer factors were very similar to the mean bark Tag values published from the extensively affected areas near Chernobyl. The magnitude of the 137Cs aggregated transfer factors for spruce bark for the pre-Chernobyl and post-Chernobyl period in the Czech Republic was also very similar. The variability in spruce bark acidity caused by the operation of local anthropogenic air pollution sources did not significantly influence the accumulation and retention of 137Cs in spruce bark. Increasing elevation of the bark sampling plots had a significant effect on raising the remaining 137Cs specific activities in bark in areas affected by precipitation at the time when the plumes crossed, because the sums of this precipitation increased with elevation (covariable). [Copyright &y& Elsevier]

Agricultural lands with farm animals (e.g. cattle) can be significantly affected by radioactive contamination following nuclear or radiation accidents. In order to optimise the techniques for measuring 137Cs in contaminated cattle, selected radiation detectors have been tested and calibrated using volumetric radiation sources. In addition, a mathematical phantom of a cow was created within Monte Carlo simulations. The main aim of the research was to propose a method for making rapid measurements of 137Cs in cattle in vivo/in situ and to select the most suitable measurement set-up. Measurements of contaminated cattle in vivo were carried out in Belarus with one selected detector, and were then compared with measurements of meat in a laboratory and with measurements of a control group of cows. The proposed measurement method was also tested on measurements of 137Cs in wild boars in Czechia with higher levels of the 137Cs activity., (© The Author(s) 2023. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.)

A series of modelling exercises, based on field tests conducted in the Czech Republic, were carried out by the 'Urban' Working Groups as part of the International Atomic Energy Agency's Environmental Modelling for Radiation Safety II, Modelling and Data for Radiological Impact Assessment (MODARIA) I and MODARIA II international data compilation and model validation programmes. In the first two of these programmes, data from a series of field tests involving dispersion of a radiotracer, 99m Tc, from small-scale, controlled detonations were used in a comparison of model predictions with field measurements of deposition. In the third programme, data from a similar field test, involving dispersion of 140 La instead of 99m Tc, were used. Use of longer-lived 140 La as a radiotracer allowed a greater number of measurements to be made over a greater distance from the dispersion point and in more directions than was possible for the earlier tests involving shorter-lived 99m Tc. The modelling exercises included both intercomparison of model predictions from several participants and comparison of model predictions with the measured data. Several models (HotSpot, LASAIR, ADDAM/CSA-ERM, plus some research models) were used in the comparisons, which demonstrated the challenges of modelling dispersion of radionuclides from detonations and the need for appropriate meteorological measurements., (© 2022 Society for Radiological Protection. Published on behalf of SRP by IOP Publishing Limited. All rights reserved.)

The IAEA's model testing programmes have included a series of Working Groups concerned with modelling radioactive contamination in urban environments. These have included the Urban Working Group of Validation of Environmental Model Predictions (1988-1994), the Urban Remediation Working Group of Environmental Modelling for Radiation Safety (EMRAS) (2003-2007), the Urban Areas Working Group of EMRAS II (2009-2011), the Urban Environments Working Group of (Modelling and Data for Radiological Impact Assessments) MODARIA I (2013-2015), and most recently, the Urban Exposures Working Group of MODARIA II (2016-2019). The overarching objective of these Working Groups has been to test and improve the capabilities of computer models used to assess radioactive contamination in urban environments, including dispersion and deposition processes, short-term and long-term redistribution of contaminants following deposition events, and the effectiveness of various countermeasures and other protective actions, including remedial actions, in reducing contamination levels, human exposures, and doses to humans. This paper describes the exercises conducted during the MODARIA I and MODARIA II programmes. These exercises have included short-range and mid-range atmospheric dispersion exercises based on data from field tests or tracer studies, hypothetical urban dispersion exercises, and an exercise based on data collected after the Fukushima Daiichi accident. Improvement of model capabilities will lead to improvements in assessing various contamination scenarios (real or hypothetical), and in turn, to improved decision-making and communication with the public following a nuclear or radiological emergency., (© 2022 Society for Radiological Protection. Published on behalf of SRP by IOP Publishing Limited. All rights reserved.)

Aim of a low radon cleanroom technology is to minimize at the same time radon, radon decay products concentration and aerosol concentration and to minimize deposition of radon decay products on the surfaces. The technology placed in a deep underground laboratory such as LSM Modane with suppressed muon flux and shielded against external gamma radiation and neutrons provides "Zero dose" space for basic research in radiobiology (validity of the LNT hypothesis for very low doses) and for the fabrication of nanoelectronic circuits to avoid undesirable "single event effects." Two prototypes of a low radon cleanroom were built with the aim to achieve radon concentration lower than 100 mBq·m 3 in an interior space where only radon-free air is delivered into the cleanroom technology from a radon trapping facility. The first prototype, built in the laboratory of SÚRO Prague, is equipped with a standard filter-ventilation system on the top of the cleanroom with improved leakproofness. In an experiment, radon concentration of some 50 mBq·m -3 was achieved with the filter-ventilation system switched out. However, it was not possible to seal the system of pipes and fans against negative-pressure air leakage into the cleanroom during a high volume ventilation with the rate of 3,500 m 3 ·h -1 . From that reason more sophisticated second prototype of the cleanroom designed in the LSM Modane uses the filter-ventilation system which is completely covered in a further improved leakproof sealed metal box placed on the top of the cleanroom. Preliminary experiments carried out in the SÚRO cleanroom with a high radon activity injection and intensive filter-ventilation (corresponding to room filtration rate every 13 s) showed extremely low radon decay products equilibrium factor of 0.002, the majority of activity being in the form of an "unattached fraction" (nanoparticles) of 218 Po and a surface deposition rate of some 0.05 mBq·m -2 ·s -1 per Bq·m -3 . Radon exhalation from persons may affect the radon concentration in a low radon interior space. Balance and time course of the radon exhalation from the human body is therefore discussed for persons that are about to enter the cleanroom., Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2021 Štekl, Hůlka, Mamedov, Fojtík, Čermáková, Jílek, Havelka, Hodák and Hýža.)

This work is focused on the use of a CZT detector for a radiation mapping with an industrial robotic arm. Measurements were carried out within the RadioRoSo experiment (Radioactive Waste Robotic Sorter), under the umbrella of EU FP7 project ECHORD++. In tests with a dual-arm robot and standard point sources of 137 Cs and 60 Co, a Magnox waste was mimicked. Thereafter, for relevant measurement geometries and selected shielding materials, full energy peak efficiencies were calculated using the MCNP transport code. Simulated FEP efficiency values were used for minimum detectable activity assessments for expected measurement conditions. Obtained results would be also applicable for cases of shielded lost/orphan point-like sources., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

The results of the three years European Metrology Research Programme's (EMRP) joint research project 'Metrology for processing materials with high natural radioactivity' (MetroNORM) are presented. In this project, metrologically sound novel instruments and procedures for laboratory and in-situ NORM activity measurements have been developed. Additionally, standard reference materials and sources for traceable calibration and improved decay data of natural radionuclides have been established., (Copyright © 2017 Elsevier Ltd. All rights reserved.)

The effectiveness of various insulating materials for limiting radon entry into houses has been investigated under laboratory conditions. Results for the radon diffusion coefficient measurements in more than 80 insulating materials are summarized. We have discovered that great differences exist in diffusion properties, because the diffusion coefficient varies within four orders from 10(-13) m2/s to 10(-10) m2/s. A methodological approach is proposed in order to identify the minimal thickness of radon-proof membranes, depending on building and soil characteristics. General guidelines for the selection of radon-proof insulation are presented.

The elimination of the sources of invasion, i. e. hay and forage coming from the infested biotopes, combined with the administration of bithionol sulphoxide, resulted in a reduction of the invasion of cattle by Fascioloides magna from 21.1 to 3.2% within two years. The Czechoslovak-produced bithionol sulphoxide, administered at a rate of 40 to 50 mg per kg body weight as medicated feed, showed 100% effectiveness. At doses higher than 30 mg per kg body weight, the protective period should be prolonged to three or four weeks.