Search

Alginate is a polysaccharide consisting of β-D-mannuronate (M) and α-L-guluronate (G) produced by brown algae and some bacterial species. Alginate has a wide range of industrial and pharmaceutical applications, owing mainly to its gelling and viscosifying properties. Alginates with high G content are considered more valuable since the G residues can form hydrogels with divalent cations. Alginates are modified by lyases, acetylases, and epimerases. Alginate lyases are produced by alginate-producing organisms and by organisms that use alginate as a carbon source. Acetylation protects alginate from lyases and epimerases. Following biosynthesis, alginate C-5 epimerases convert M to G residues at the polymer level. Alginate epimerases have been found in brown algae and alginate-producing bacteria, predominantly Azotobacter and Pseudomonas species. The best characterised epimerases are the extracellular family of AlgE1-7 from Azotobacter vinelandii(Av). AlgE1-7 all consist of combinations of one or two catalytic A-modules and one to seven regulatory R-modules, but even though they are sequentially and structurally similar, they create different epimerisation patterns. This makes the AlgE enzymes promising for tailoring of alginates to have the desired properties. The present review describes the current state of knowledge regarding alginate-active enzymes with focus on epimerases, characterisation of the epimerase reaction, and how alginate epimerases can be used in alginate production.

Abstract FK-506 is a potent immunosuppressive macrocyclic polyketide with growing pharmaceutical interest, produced by Streptomyces tsukubaensis. However, due to low levels synthesized by the wild-type strain, biotechnological production of FK-506 is rather limited. Optimization strategies to enhance the productivity of S. tsukubaensis by means of genetic engineering have been established. In this work primarily global regulatory aspects with respect to the FK-506 biosynthesis have been investigated with the focus on the global Crp (cAMP receptor protein) regulator. In expression analyses and protein-DNA interaction studies, the role of Crp during FK-506 biosynthesis was elucidated. Overexpression of Crp resulted in two-fold enhancement of FK-506 production in S. tsukubaensis under laboratory conditions. Further optimizations using fermentors proved that the strategy described in this study can be transferred to industrial scale, presenting a new approach for biotechnological FK-506 production. Key Points • The role of the global Crp (cAMP receptor protein) regulator for FK-506 biosynthesis in S. tsukubaensis was demonstrated • Crp overexpression in S. tsukubaensis was applied as an optimization strategy to enhance FK-506 and FK-520 production resulting in two-fold yield increase

International audience; Plant biomass is a promising substrate for biorefinery, as well as a source of bioactive compounds, platform chemicals, and precursors with multiple industrial applications. These applications depend on the hydrolysis of its recalcitrant structure. However, the effective biological degradation of plant cell walls requires several enzymatic groups acting synergistically, and novel enzymes are needed in order to achieve profitable industrial hydrolysis processes. In the present work, a feruloyl esterase (FAE) activity screening of Penicillium spp. strains revealed a promising candidate (Penicillium rubens Wisconsin 54-1255; previously Penicillium chrysogenum), where two FAE-ORFs were identified and subsequently overexpressed. Enzyme extracts were analyzed, confirming the presence of FAE activity in the respective gene products (PrFaeA and PrFaeB). PrFaeB-enriched enzyme extracts were used to determine the FAE activity optima (pH 5.0 and 50-55 °C) and perform proteome analysis by means of MALDI-TOF/TOF mass spectrometry. The studies were completed with the determination of other lignocellulolytic activities, an untargeted metabolite analysis, and upscaled FAE production in stirred tank reactors. The findings described in this work present P. rubens as a promising lignocellulolytic enzyme producer. KEY POINTS: • Two Penicillium rubens ORFs were first confirmed to have feruloyl esterase activity. • Overexpression of the ORFs produced a novel P. rubens strain with improved activity. • The first in-depth proteomic study of a P. rubens lignocellulolytic extract is shown.

For improved control of biomaterial property design, a better understanding of complex coacervation involving anionic polysaccharides and proteins is needed. Here, we address the initial steps in condensate formation of β-lactoglobulin A (β-LgA) with nine defined alginate oligosaccharides (AOSs) and describe their multivalent interactions in structural detail. Binding of AOSs containing four, five, or six uronic acid residues (UARs), either all mannuronate (M), all guluronate (G), or alternating M and G embodying the block structural components of alginates, was characterized by isothermal titration calorimetry, nuclear magnetic resonance spectroscopy (NMR), and molecular docking. β-LgA was highly multivalent exhibiting binding stoichiometries decreasing from five to two AOSs with increasing degree of polymerization (DP) and similar affinities in the mid micromolar range. The different AOS binding sites on β-LgA were identified by NMR chemical shift perturbation analyses and showed diverse compositions of charged, polar and hydrophobic residues. Distinct sites for the shorter AOSs merged to accommodate longer AOSs. The AOSs bound dynamically to β-LgA, as concluded from saturation transfer difference and 1H-ligand-targeted NMR analyses. Molecular docking using Glide within the Schrödinger suite 2016-1 revealed the orientation of AOSs to only vary slightly at the preferred β-LgA binding site resulting in similar XP glide scores. The multivalency coupled with highly dynamic AOS binding with lack of confined conformations in the β-LgA complexes may help explain the first steps toward disordered β-LgA alginate coacervate structures. For improved control of biomaterial property design, a better understanding of complex coacervation involving anionic polysaccharides and proteins is needed. Here, we address the initial steps in condensate formation of beta-lactoglobulin A (beta-LgA) with nine defined alginate oligosaccharides (AOSs) and describe their multivalent interactions in structural detail. Binding of AOSs containing four, five, or six uronic acid residues (UARs), either all mannuronate (M), all guluronate (G), or alternating M and G embodying the block structural components of alginates, was characterized by isothermal titration calorimetry, nuclear magnetic resonance spectroscopy (NMR), and molecular docking. beta-LgA was highly multivalent exhibiting binding stoichiometries decreasing from five to two AOSs with increasing degree of polymerization (DP) and similar affinities in the mid micromolar range. The different AOS binding sites on beta-LgA were identified by NMR chemical shift perturbation analyses and showed diverse compositions of charged, polar and hydrophobic residues. Distinct sites for the shorter AOSs merged to accommodate longer AOSs. The AOSs bound dynamically to beta-LgA, as concluded from saturation transfer difference and H-1-ligand-targeted NMR analyses. Molecular docking using Glide within the Schrodinger suite 2016-1 revealed the orientation of AOSs to only vary slightly at the preferred beta-LgA binding site resulting in similar XP glide scores. The multivalency coupled with highly dynamic AOS binding with lack of confined conformations in the beta-LgA complexes may help explain the first steps toward disordered beta-LgA alginate coacervate structures.

Aims The aim of this study was to develop a high-throughput robotic microtiter plate-based screening assay for Candida albicans, optimizing growth conditions to replicate the filamentous biofilm growth found in vivo, and subsequently, to demonstrate the assay by evaluating the effect of nutritional drinks alone and in combination with the antifungal amphotericin B (AmB). Methods and Results Candida albicans cultured in a defined growth medium showed filamentous growth in microcolonies, mimicking the morphology of oral mucosal disease (oral candidiasis). Addition of nutrient drinks containing fruit juices, fish oil and whey protein to the medium resulted in changed morphology and promoted growth as free yeast cells and with weak biofilm structures. Minimum inhibitory concentration of AmB on the biofilms was 0.25 μg ml−1, and this was eightfold reduced (0.0038 μg ml−1) in the presence of the nutritional drinks. Conclusions The established assay demonstrated applicability for screening of antifungal and anti-biofilm effects of bioactive substances on C. albicans biofilm with clinically relevant morphology. Significance and Impact of the Study Candida albicans is the causative agent of the majority of fungal infections globally. The filamentous morphology of C. albicans and the ability to form biofilm are traits known to increase virulence and resistance towards antifungals. This study describes the development of a plate-based in vitro screening method mimicking the filamentous morphology of C. albicans found in vivo. The assay established can thus facilitate efficient antifungal drug discovery and development.

Twelve marine peptones prepared from rest raw materials (RRM) from farmed salmon have been evaluated as nutrient sources in growth media for industrial microorganisms. The peptones were prepared from head and backbones, or from head, backbones and viscera, using different proteases and one or two-step hydrolysis. Growth was determined as optical density using a high-throughput robotic system, allowing for testing of a large number of peptones and microorganisms. For two Lactobacillus-strains tested, the peptones were the only nitrogen source, while for four aerobic bacteria and yeasts, the peptones were assessed as a source of growth factors, with inorganic nitrogen in excess in the media. The peptones containing viscera resulted in higher cell yields than those without, and high growth rates were maintained to higher cell densities. The viscera-containing peptones were better than meat-based peptones, and equally good as yeast extract. The differences between the performance of peptones with and without viscera could be explained by the mineral content and the degree of hydrolysis. Since peptones based on farmed salmon RRM can be provided in large quantities with a stable quality, they should be further explored as a nutrient source for the fermentation industry.

The structure and functional properties of alginates are dictated by the monomer composition and molecular weight distribution. Mannuronan C-5 epimerases determine the monomer composition by catalysing the epimerization of β-d-mannuronic acid residues (M) into α-l-guluronic acid residues (G). The molecular weight is affected by alginate lyases, which catalyse a β-elimination mechanism that cleaves alginate chains. The reaction mechanisms for the epimerization and lyase reactions are similar and some enzymes can perform both reactions. These dualistic enzymes share high sequence identity with mannuronan C-5 epimerases without lyase activity. The mechanism behind their activity and the amino acid residues responsible for it are still unknown. We investigate mechanistic determinants involved in the bifunctional epimerase and lyase activity of AlgE7 from Azotobacter vinelandii. Based on sequence analyses, a range of AlgE7 variants were constructed and subjected to activity assays and product characterization by NMR. Our results show that calcium promotes lyase activity whereas NaCl reduces the lyase activity of AlgE7. By using defined poly-M and poly-MG substrates, the preferred cleavage sites of AlgE7 were found to be M|XM and G|XM, where X can be either M or G. From the study of AlgE7 mutants, R148 was identified as an important residue for the lyase activity, and the point mutant R148G resulted in an enzyme with only epimerase activity. Based on the results obtained in the present study we suggest a unified catalytic reaction mechanism for both epimerase and lyase activity where H154 functions as the catalytic base and Y149 as the catalytic acid. Importance Post-harvest valorisation and upgrading of algal constituents is a promising strategy in the development of a sustainable bioeconomy based on algal biomass. In this respect, alginate epimerases and lyases are valuable enzymes for tailoring of the functional properties of alginate, a polysaccharide extracted from brown seaweed with numerous applications in food, medicine, and material industries. By providing a better understanding of the catalytic mechanism and of how the two enzyme actions can be altered by changes in reaction conditions, this study opens for further applications of bacterial epimerases and lyases in enzymatic tailoring of alginate polymers.

Alginates are linear polysaccharides produced by brown algae and some bacteria and are composed of β-D-mannuronic acid (M) and α-L-guluronic acid (G). Alginate has numerous present and potential future applications within industrial, medical and pharmaceutical areas and G rich alginates are traditionally most valuable and frequently used due to their gelling and viscosifying properties. Mannuronan C-5 epimerases are enzymes converting M to G at the polymer level during the biosynthesis of alginate. The

The functional properties of alginates are dictated by the monomer composition and molecular weight distribution. Mannuronan C-5 epimerases determine the former by epimerizing β-D-mannuronic acid residues (M) into α-L-guluronic acid residues (G). The molecular weight is affected by alginate lyases, which cleave alginate chains through β-elimination. The reaction mechanisms for the epimerization and cleavage are similar and some enzymes can perform both. These dualistic enzymes share high sequence identity with mannuronan C-5 epimerases without lyase activity, and the mechanism behind their activity as well as the amino acids responsible for it are still unknown. In this study, we investigate mechanistic determinants of the bifunctional epimerase and lyase activity of AlgE7 from Azotobacter vinelandii. Based on sequence analyses, a range of AlgE7 variants were constructed and subjected to activity assays and product characterization by NMR. Our results show that the lyase activity of AlgE7 is regulated by the type of ion present: Calcium promotes it, whereas NaCl reduces it. By using defined poly-M and poly-MG substrates, the preferred cleavage sites of AlgE7 were found to be M↓XM and G↓XM, where X can be either M or G. By studying AlgE7 mutants, R148 was identified as an important residue for the lyase activity, and the point mutant R148G resulted in an enzyme with only epimerase activity. Based on the results obtained in the present study we suggest a unified catalytic reaction mechanism for both epimerase and lyase activities where H154 functions as the catalytic base and Y149 as the catalytic acid.ImportancePost-harvest valorisation and upgrading of algal constituents is a promising strategy in the development of a sustainable bioeconomy based on algal biomass. In this respect, alginate epimerases and lyases are valuable enzymes for tailoring of the functional properties of alginate, a polysaccharide extracted from brown seaweed with numerous applications in food, medicine and material industries. By providing a better understanding of the reaction mechanism and of how the two enzyme reactions can be altered by changes in reaction conditions, this study opens for further applications of bacterial epimerases and lyases in enzymatic tailoring of alginate polymers.

Background Butanol (n-butanol) has been gaining attention as a renewable energy carrier and an alternative biofuel with superior properties to the most widely used ethanol. We performed 48 anaerobic fermentations simultaneously with glucose and xylose as representative lignocellulosic sugars by Clostridium beijerinckii NCIMB 8052 in BioLector® microbioreactors to understand the effect of different sugar mixtures on fermentation and to demonstrate the applicability of the micro-cultivation system for high-throughput anaerobic cultivation studies. We then compared the results to those of similar cultures in serum flasks to provide insight into different setups and measurement methods. Results ANOVA results showed that the glucose-to-xylose ratio affects both growth and production due to Carbon Catabolite Repression. The study demonstrated successful use of BioLector® system for the first time for screening several media and sugar compositions under anaerobic conditions by using online monitoring of cell mass and pH in real-time and at unprecedented time-resolution. Fermentation products possibly interfered with dissolved oxygen (DO) measurements, which require a careful interpretation of DO monitoring results. Conclusions The statistical approach to evaluate the microbioreactor setup, and information obtained in this study will support further research in bioreactor and bioprocess design, which are very important aspects of industrial fermentations of lignocellulosic biomass.

Enzymatic depolymerization of seaweed polysaccharides is gaining interest for the production of functional oligosaccharides and fermentable sugars. Herein, we describe a thermostable alginate lyase that belongs to polysaccharide lyase family 17 (PL17) and was derived from an Arctic Mid-Ocean Ridge (AMOR) metagenomics data set. This enzyme, AMOR_PL17A, is a thermostable exolytic oligoalginate lyase (EC 4.2.2.26), which can degrade alginate, poly-β-d-mannuronate, and poly-α-l-guluronate within a broad range of pHs, temperatures, and salinity conditions. Site-directed mutagenesis showed that tyrosine Y251, previously suggested to act as a catalytic acid, indeed is essential for catalysis, whereas mutation of tyrosine Y446, previously proposed to act as a catalytic base, did not affect enzyme activity. The observed reaction products are protonated and deprotonated forms of the 4,5-unsaturated uronic acid monomer, Δ, two hydrates of DEH (4-deoxy-l-erythro-5-hexulosuronate), which are formed after ring opening, and, finally, two epimers of a 5-member hemiketal called 4-deoxy-d-manno-hexulofuranosidonate (DHF), formed through intramolecular cyclization of hydrated DEH. The detection and nuclear magnetic resonance (NMR) assignment of these hemiketals refine our current understanding of alginate degradation. IMPORTANCE The potential markets for seaweed-derived products and seaweed processing technologies are growing, yet commercial enzyme cocktails for complete conversion of seaweed to fermentable sugars are not available. Such an enzyme cocktail would require the catalytic properties of a variety of different enzymes, where fucoidanases, laminarinases, and cellulases together with endo- and exo-acting alginate lyases would be the key enzymes. Here, we present an exo-acting alginate lyase that efficiently produces monomeric sugars from alginate. Since it is only the second characterized exo-acting alginate lyase capable of degrading alginate at a high industrially relevant temperature (≥60°C), this enzyme may be of great biotechnological and industrial interest. In addition, in-depth NMR-based structural elucidation revealed previously undescribed rearrangement products of the unsaturated monomeric sugars generated from exo-acting lyases. The insight provided by the NMR assignment of these products facilitates future assessment of product formation by alginate lyases.

Brown macroalgae constitute 40% of the global production of seaweed, corresponding to approximately 10 million tonnes annually. Traditionally, seaweeds have been the source of hydrocolloids, food, and feed products. Due to possibilities for large-scale farming, brown macroalgae are a biomass with considerable potential for increased utilization. The main constituent polysaccharides, being alginate, cellulose, laminaran, and fucoidan, are the components of greatest importance for biorefinery usage. The polysaccharides can be extracted and applied for their physical or bioactive properties or used as a carbon source for microbial conversions to biofuels and commodity chemicals. The structural complexity and heterogeneous sugar composition of the polysaccharides make them a challenging biorefinery feedstock. These challenges can be overcome by the increasingly innovative biocatalytic tools, enzymes and microbes, that are being developed and that can be expected to open new opportunities and expand the product portfolio. However, there are still knowledge gaps, and further understanding is required on the molecular level of these interesting polymers, the tools, the refining possibilities, as well as transforming this knowledge to innovations—processes and products. (Less)

Alginates are one of the major polysaccharide constituents of marine brown algae in commercial manufacturing. However, the content and composition of alginates differ according to the distinct parts of these macroalgae and have a direct impact on the concentration of guluronate and subsequent commercial value of the final product. The Azotobacter vinelandii mannuronan C-5 epimerases AlgE1 and AlgE4 were used to determine their potential value in tailoring the production of high guluronate low-molecular-weight alginates from two sources of high mannuronic acid alginates, the naturally occurring harvested brown algae (Ascophyllum nodosum, Durvillea potatorum, Laminaria hyperborea and Lessonia nigrescens) and a pure mannuronic acid alginate derived from fermented production of the mutant strain of Pseudomonas fluorescens NCIMB 10,525. The mannuronan C-5 epimerases used in this study increased the content of guluronate from 32% up to 81% in both the harvested seaweed and bacterial fermented alginate sources. The guluronate-rich alginate oligomers subsequently derived from these two different sources showed structural identity as determined by proton nuclear magnetic resonance (1H NMR), high-performance anion-exchange chromatography with pulsed amperometric detection (HPAEC-PAD) and size-exclusion chromatography with online multi-angle static laser light scattering (SEC-MALS). Functional identity was determined by minimum inhibitory concentration (MIC) assays with selected bacteria and antibiotics using the previously documented low-molecular-weight guluronate enriched alginate OligoG CF-5/20 as a comparator. The alginates produced using either source showed similar antibiotic potentiation effects to the drug candidate OligoG CF-5/20 currently in development as a mucolytic and anti-biofilm agent. These findings clearly illustrate the value of using epimerases to provide an alternative production route for novel low-molecular-weight alginates. © 2020 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (http://creativecommons.org/licenses/by/4.0/).

Alginate is a linear copolymer composed of 1→4 linked β-d-mannuronic acid (M) and its epimer α-l-guluronic acid (G). The polysaccharide is first produced as homopolymeric mannuronan and subsequently, at the polymer level, C-5 epimerases convert M residues to G residues. The bacterium Azotobacter vinelandii encodes a family of seven secreted and calcium ion-dependent mannuronan C-5 epimerases (AlgE1–AlgE7). These epimerases consist of two types of structural modules: the A-modules, which contain the catalytic site, and the R-modules, which influence activity through substrate and calcium binding. In this study, we rationally designed new hybrid mannuronan C-5 epimerases constituting the A-module from AlgE6 and the R-module from AlgE4. This led to a better understanding of the molecular mechanism determining differences in MG- and GG-block-forming properties of the enzymes. A long loop with either tyrosine or phenylalanine extruding from the β-helix of the enzyme proved essential in defining the final alginate block structure, probably by affecting substrate binding. Normal mode analysis of the A-module from AlgE6 supports the results. This is an open access article published under an ACS AuthorChoice License, which permits copying and redistribution of the article or any adaptations for non-commercial purposes.

This document is the unedited Author’s version of a Submitted Work that was subsequently accepted for publication in Biomacromolecules , copyright © American Chemical Society after peer review. To access the final edited and published work see https://doi.org/10.1021/acs.biomac.8b01796 With the present accessibility of algal raw material, microbial alginates as a source for strong gelling material are evaluated as an alternative for advanced applications. Recently, we have shown that alginate from algal sources all contain a fraction of very long G-blocks (VLG), that is, consecutive sequences of guluronic acid (G) residues of more than 100 residues. By comparing the gelling properties of these materials with in vitro epimerized polymannuronic acid (poly-M) with shorter G-blocks, but comparable with the G-content, we could demonstrate that VLG have a large influence on gelling properties. Hypothesized to function as reinforcement bars, VLG prevents the contraction of the gels during formation (syneresis) and increases the Young’s modulus (strength of the gel). Here we report that these VLG structures are also present in alginates from Azotobacter vinelandii and that these polymers consequently form stable, low syneretic gels with calcium, comparable in mechanical strength to algal alginates with the similar monomeric composition. The bacterium expresses seven different extracellular mannuronan epimerases (AlgE1-AlgE7), of which only the bifunctional epimerase AlgE1 seems to be able to generate the long G-blocks when acting on poly-M. The data implies evidence for a processive mode of action and the necessity of two catalytic sites to obtain the observed epimerization pattern. Furthermore, poly-M epimerized with AlgE1 in vitro form gels with comparable or higher rigidity and gel strength than gels made from brown seaweed alginate with matching G-content. These findings strengthen the viability of commercial alginate production from microbial sources.

Chitin deacetylases are a group of enzymes catalysing the conversion of chitin to chitosan. Obtaining chitosan with established deacetylation degree and pattern is important for biomedical and biotechnological applications. Understandings of the structural properties of chitin deacetylases and the specificity of their interactions with chitin may conduct to the control of the pattern of deacetylation of chitosan. Our study is focused on the characterization and comparison of the structural and physicochemical properties of chitin deacetylases from fungi and marine bacteria. Despite the low sequences identity for the investigated chitin deacetylases, there are amino acids belonging to their active sites that are strongly conserved. Moreover, they reveal an increased structural similarity of their catalytic domains, reflecting the common biological function of these enzymes. The studied enzymes present dissimilar local physicochemical properties of their catalytic cavities that could be responsible of their distinct deacetylation patterns. Molecular docking studies reflect that deacetylation efficiency is also distinct for the chitin and partially deacetylated chitin oligomers and that N-acetylglucosamine units and some partially deacetylated chitin oligomers could have inhibitory effect against chitin deacetylases belonging to fungi and marine bacteria.

A family of seven mannuronan C5-epimerases (AlgE1-AlgE7) produced by Azotobacter vinelandii is able to convert β- d -mannuronate (M) to its epimer α- l -guluronate (G) in alginates. Even sharing high sequence homology at the amino acid level, they produce distinctive epimerization patterns. The introduction of new G-blocks into the polymer by in vitro epimerization is a strategy to improve the mechanical properties of alginates as biomaterial. However, epimerization is hampered when the substrate is modified or in the gelled state. Here it is presented how native and engineered epimerases of varying size perform on steric hindered alginate substrates (modified or as hydrogels). Reducing the size of the epimerases enables the epimerization of otherwise inaccessible regions in the alginate polymer. Even though the reduction of the size affects the productive binding of epimerases to the substrate, and hence their activity, the smaller epimerases could more freely diffuse into calcium-alginate hydrogel and epimerize it.

Human chitotriosidase (HCHT) is one of two active glycoside hydrolase family 18 chitinases produced by humans. The enzyme is associated with several diseases and is thought to play a role in the anti-parasite responses of the innate immune system. HCHT occurs in two isoforms, one 50 kDa (HCHT50) and one 39 kDa variant (HCHT39). Common for both isoforms is a catalytic domain with the (β/α)8 TIM barrel fold. HCHT50 has an additional linker-region, followed by a C-terminal carbohydrate-binding module (CBM) classified as CBM family 14 in the CAZy database. To gain further insight into enzyme functionality and especially the effect of the CBM, we expressed both isoforms and compared their catalytic properties on chitin and high molecular weight chitosans. HCHT50 degrades chitin faster than HCHT39 and much more efficiently. Interestingly, both HCHT50 and HCHT39 show biphasic kinetics on chitosan degradation where HCHT50 is faster initially and HCHT39 is faster in the second phase. Moreover, HCHT50 produces distinctly different oligomer distributions than HCHT39. This is likely due to increased transglycosylation activity for HCHT50 due the CBM extending the positive subsites binding surface and therefore promoting transglycosylation. Finally, studies with both chitin and chitosan showed that both isoforms have a similarly low degree of processivity. Combining functional and structural features of the two isoforms, it seems that HCHT combines features of exo-processive and endo-nonprocessive chitinases with the somewhat unusual CBM14 to reach a high degree of efficiency, in line with its alleged physiological task of being a “complete” chitinolytic machinery by itself.

Alginate oligomers retain most of the chemical and physical properties of the higher molecular weight commercial alginates, retaining affinity towards monovalent and divalent ions, which is dependent on the chemical composition of the oligomer. However, due to their low molecular weight, they will normally not form gels in the presence of divalent cations. This property is exploited in biological systems to chelate multivalent ions and disrupt Ca2+-mediated cross-linking. Studies have also identified interactions between alginate oligomers and complex mucin polymer systems, bacteria and extracellular polymeric substance (EPS), which suggests that these interactions are not simply the result of cationic chelation. By virtue of their low molecular weight, alginate oligomers stay in solution at high concentration without significant increase in viscosity and can be tailor-made to precisely defined chemical composition and molecular weight. This affords the opportunity to design effective formulations with precisely defined properties and biological effects. The properties now being identified for alginate oligomers represent a promising new approach in the management of chronic lung diseases, biofilm infections and antibiotic use. This chapter outlines the research performed to date, highlighting the excellent safety profile and novel chemical characteristics of alginate oligomers that emphasize their potential in multiple therapeutic applications.

The chapter describes the bioconversion of phytosterols to androstenedione (AD) with Mycobacterium spp. in shake flasks and fermenters, as well as LC-MS based methods for analysis of phytosterols and steroid products.Phytosterols are derived as a by-product of vegetable oil refining and of manufacture of wood pulp. Phytosterols contain the same four-ring nucleus as steroids, and may be converted to high-value steroids by removing the side chain at C17 and minor changes at other sites in the ring structure.Many bacteria, including Mycobacterium spp., are able to degrade phytosterols. Mutants of Mycobacterium spp. unable of ring cleavage can, when growing on phytosterols, accumulate the steroid intermediates androstenedione (AD) and/or androstadienedione (ADD).The practical challenge with microbial conversion of phytosterols to steroids is that both the substrate and the product are virtually insoluble in water. In addition, some steroids, notably ADD, may be toxic to cells.Two main strategies have been employed to overcome this challenge: the use of two-phase systems, and the addition of chemically modified cyclodextrins. The latter method is used here.Defined cultivation and bioconversion media for both shake flask and fermenter are given, as well as suggestions to minimize the practical problems caused by the water-insoluble phytosterol. Sampling, sample extraction, and quantification of substrates and products using LC-MS analysis are described.

The chapter describes the bioconversion of phytosterols to androstenedione (AD) with Mycobacterium spp. in shake flasks and fermenters, as well as LC-MS based methods for analysis of phytosterols and steroid products.Phytosterols are derived as a by-product of vegetable oil refining and of manufacture of wood pulp. Phytosterols contain the same four-ring nucleus as steroids, and may be converted to high-value steroids by removing the side chain at C17 and minor changes at other sites in the ring structure.Many bacteria, including Mycobacterium spp., are able to degrade phytosterols. Mutants of Mycobacterium spp. unable of ring cleavage can, when growing on phytosterols, accumulate the steroid intermediates androstenedione (AD) and/or androstadienedione (ADD).The practical challenge with microbial conversion of phytosterols to steroids is that both the substrate and the product are virtually insoluble in water. In addition, some steroids, notably ADD, may be toxic to cells.Two main strategies have been employed to overcome this challenge: the use of two-phase systems, and the addition of chemically modified cyclodextrins. The latter method is used here.Defined cultivation and bioconversion media for both shake flask and fermenter are given, as well as suggestions to minimize the practical problems caused by the water-insoluble phytosterol. Sampling, sample extraction, and quantification of substrates and products using LC-MS analysis are described.

Alginate oligomers have been shown to disrupt microbial biofilms and reduce minimum inhibitory concentrations (MIC) for many clinically relevant antibiotics to a range of human pathogens. The antibiofilm and potentiating effects of alginate oligomers has previously been focussed on bacterial and fungal strains that play significant roles in chronic human infections. This study on the effects of an alginate oligomer (OligoG CF-5/20) on bacteria that cause bovine mastitis is the first report that investigates a significant disease in animal health. The effect of OligoG CF-5/20 on the inhibitory concentrations of ampicillin, erythromycin, cephalothin and lincomycin to a test panel of nine bacterial strains associated with bovine mastitis were investigated. Two different media were used for cultivation, the standard Mueller-Hinton normally used for bacterial MIC determination, and a skimmed milk medium to mimic the native growth conditions for mastitis bacteria. OligoG CF-5/20 was shown to inhibit growth of all strains tested, and demonstrated a 2 to 8 fold reduction in MICs for erythromycin, cephalothin and lincomycin. The data highlights a potential role for alginate oligomers in potentiating the efficacy of antibiotics, and thereby potentially reducing antibiotic use, in the treatment of mastitis in dairy cattle.

Although nanotoxicology has become a large research field, assessment of cytotoxicity is often reduced to analysis of one cell line only. Cytotoxicity of nanoparticles is complex and should, preferentially, be evaluated in several cell lines with different methods and on multiple nanoparticle batches. Here we report the toxicity of poly(alkyl cyanoacrylate) nanoparticles in 12 different cell lines after synthesizing and analyzing 19 different nanoparticle batches and report that large variations were obtained when using different cell lines or various toxicity assays. Surprisingly, we found that nanoparticles with intermediate degradation rates were less toxic than particles that were degraded faster or more slowly in a cell-free system. The toxicity did not vary significantly with either the three different combinations of polyethylene glycol surfactants or with particle size (range 100–200 nm). No acute pro- or anti-inflammatory activity on cells in whole blood was observed. © 2017 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (http://creativecommons.org/licenses/by/4.0/).

Fighting bacterial resistance is one of the concerns in modern days, as antibiotics remain the main resource of bacterial control. Data shows that for every antibiotic developed, there is a microorganism that becomes resistant to it. Natural polymers, as the source of antibacterial agents, offer a new way to fight bacterial infection. The advantage over conventional synthetic antibiotics is that natural antimicrobial agents are biocompatible, non-toxic, and inexpensive. Chitosan is one of the natural polymers that represent a very promising source for the development of antimicrobial agents. In addition, chitosan is biodegradable, non-toxic, and most importantly, promotes wound healing, features that makes it suitable as a starting material for wound dressings. This paper reviews the antimicrobial properties of chitosan and describes the mechanisms of action toward microbial cells as well as the interactions with mammalian cells in terms of wound healing process. Finally, the applications of chitosan as a wound-dressing material are discussed along with the current status of chitosan-based wound dressings existing on the market. © 2019 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (http://creativecommons.org/licenses/by/4.0/)

Phenazine natural products/compounds possess a range of biological activities, including anti-microbial and cytotoxic, making them valuable starting materials for drug development in several therapeutic areas. These compounds are biosynthesized almost exclusively by eubacteria of both terrestrial and marine origins from erythrose 4-phosphate and phosphoenol pyruvate via the shikimate pathway. In this paper, we report isolation of actinomycete bacteria from marine sediment collected in the Trondheimfjord, Norway. Screening of the isolates for biological activity produced several "hits", one of which was followed up by identification and purification of the active compound from the actinomycete bacterium Streptosporangium sp. The purified compound, identified as 1,6-dihydroxyphenazine-5,10-dioxide (iodinin), was subjected to extended tests for biological activity against bacteria, fungi and mammalian cells. In these tests, the iodinin demonstrated high anti-microbial and cytotoxic activity, and was particularly potent against leukaemia cell lines. This is the first report on the isolation of iodinin from a marine-derived Streptosporangium.

The Norwegian salmonid alphavirus (NSAV) infects farmed Atlantic salmon and rainbow trout, causes pancreas disease and leads to economic losses and fish health issues for the aquaculture. Vaccines ...

We previously designed the consensus signal peptide (CSP) and demonstrated that it can be used to strongly stimulate heterologous protein production in Escherichia coli . A comparative study using CSP and two bacterial signal sequences, pelB and ompA, showed that the effect of signal sequences on both expression level and translocation efficiency can be highly protein specific. We report here the generation of CSP mutant libraries by a combinatorial mutagenesis approach. Degenerated CSP oligonucleotides were cloned in frame with the 5′ end of the bla gene, encoding the mature periplasmic β-lactamase released from its native signal sequence. This novel design allows for a direct selection of improved signal sequences that positively affect the expression level and/or translocation efficiency of β-lactamase, based on the ampicillin tolerance level of the E. coli host cells. By using this strategy, 61 different CSP mutants with up to 8-fold-increased ampicillin tolerance level and up to 5.5-fold-increased β-lactamase expression level were isolated and characterized genetically. A subset of the CSP mutants was then tested with the alternative reporter gene phoA , encoding periplasmic alkaline phosphatase (AP), resulting in an up to 8-fold-increased production level of active AP protein in E. coli . Moreover, it was demonstrated that the CSP mutants can improve the production of the medically important human interferon α2b under high-cell-density cultivations. Our results show that there is a clear potential for improving bacterial signal sequences by using combinatorial mutagenesis, and bioinformatics analyses indicated that the beneficial mutations could not be rationally predicted.

Metabolic profiling of Pseudomonas fluorescens SBW25 and various mutants derived thereof was performed to explore how the bacterium adapt to changes in carbon source and upon induction of alginate synthesis. The experiments were performed at steady-state conditions in nitrogen-limited chemostats using either fructose or glycerol as carbon source. Carbon source consumption was up-regulated in the alginate producing mutant with inactivated anti-sigma factor MucA. The mucA- mutants (also non-alginate producing mucA- control strains) had a higher dry weight yield on carbon source implying a change in carbon and energy metabolism due to the inactivation of the anti-sigma factor MucA. Both LC–MS/MS and GC–MS methods were used for quantitative metabolic profiling, and major reorganization of primary metabolite pools in both an alginate producing and a carbon source dependent manner was observed. Generally, larger changes were observed among the phosphorylated glycolytic metabolites, the pentose phosphate pathway metabolites and the nucleotide pool than among amino acids and citric acid cycle compounds. The most significant observation at the metabolite level was the significantly reduced energy charge of the mucA- mutants (both alginate producing and non-producing control strains) compared to the wild type strain. This reduction was caused more by a strong increase in the AMP pool than changes in the ATP and ADP pools. The alginate-producing mucA- mutant had a slightly increased GTP pool, while the GDP and GMP pools were strongly increased compared to non-producing mucA- strains and to the wild type. Thus, whilst changes in the adenosine phosphate nucleotide pool are attributed to the mucA inactivation, adjustments in the guanosine phosphate nucleotide pool are consequences of the GTP-dependent alginate production induced by the mucA inactivation. This metabolic profiling study provides new insight into carbon and energy metabolism of the alginate producer P. fluorescens.

Alginates from seaweed are used in chronic wound management, though the molecular and cellular effects of various alginate dressings are not well documented. We have developed ultrapure sodium-alginates from Pseudomonas fluorescens with different content and distribution of single guluronic acid (G) residues (0-45% G), and tested their biological activities on human primary keratinocytes (KCs). The alginates inhibited KC migration and induced expression of differentiation markers. The potency of the alginates correlated with the increasing percentage of single G residues. These findings were explained by different binding and release of ionic calcium (Ca++) from the alginates which subsequently triggered differentiation. Ca-free alginates had no effect on KC migration and differentiation, but the chemokine receptor CXCR7 was upregulated. Q-PCR revealed that also CXCL12/SDF-1, one of two known CXCR7-ligands, was induced by the alginates. Both CXCR7 and CXCL12-induction was dependent on the alginate G-content, and highest upregulation was induced by an alginate with 19% single G residues. In the epidermis, CXCR7 expression was restricted to the basal layer. This study defines two biological effects of ultrapure alginates on KCs, both being dependent on the alginate structure, and being either dependent or independent of Ca.

Bioprospecting aims at the identification of biological compounds with novel properties. Identification of such compounds in crude complex biological extracts is a comprehensive challenge. As a large number of extracts must be screened for successful identification of one potential promising lead, rational screening strategies must be developed. Here we report on a novel two stage rational LC-MS strategy of extracts already pre-screened and proven to contain bioactive compound(s). All extracts are initially fractionated using one and the same LC condition with parallel mass spectrometric detection. Fractions containing bioactive compound(s) are then subjected to a second fractional stage using two different chromatographic conditions. Mass detection is also included at this stage, and a cross-matching algorithm for comparison of processed mass chromatograms from the two dimensions was developed. The algorithm reports only masses present in bioactive fractions in both dimensions and enable therefore an efficient identification of potential masses that causes the bioactivity. This mass list can be used to search in natural compound database(s) for a rapid evaluation if the mass belongs to an already identified compound or if it is a potentially new one. This strategy enables thorough screening of several hundred crude extracts in one week on one single instrument.

Polyene macrolides are important antibiotics used to treat fungal infections in humans. In this work, acyltransferase (AT) domain swaps, mutagenesis, and cross-complementation with heterologous polyketide synthase domain (PKS) loading modules were performed in order to facilitate production of new analogues of the polyene macrolide nystatin. Replacement of AT 0 in the nystatin PKS loading module NysA with the propionate-specific AT 1 from the nystatin PKS NysB, construction of hybrids between NysA and the loading module of rimocidin PKS RimA, and stepwise exchange of specific amino acids in the AT 0 domain by site-directed mutagenesis were accomplished. However, none of the NysA mutants constructed was able to initiate production of new nystatin analogues. Nevertheless, many NysA mutants and hybrids were functional, providing for different levels of nystatin biosynthesis. An interplay between certain residues in AT 0 and an active site residue in the ketosynthase (KS)-like domain of NysA in initiation of nystatin biosynthesis was revealed. Some hybrids between the NysA and RimA loading modules carrying the NysA AT 0 domain were able to prime rimocidin PKS with both acetate and butyrate units upon complementation of a rimA -deficient mutant of the rimocidin/CE-108 producer Streptomyces diastaticus . Expression of the PimS0 loading module from the pimaricin producer in the same host, however, resulted in production of CE-108 only. Taken together, these data indicate relaxed substrate specificity of NysA AT 0 domain, which is counteracted by a strict specificity of the first extender module KS domain in the nystatin PKS of Streptomyces noursei .

Alginates are commercially valuable and complex polysaccharides composed of varying amounts and distribution patterns of 1-4-linked β-D-mannuronic acid (M) and α-L-guluronic acid (G). This structural variability strongly affects polymer physicochemical properties and thereby both commercial applications and biological functions. One promising approach to alginate fine structure elucidation involves the use of alginate lyases, which degrade the polysaccharide by cleaving the glycosidic linkages through a β-elimination reaction. For such studies one would ideally like to have different lyases, each of which cleaves only one of the four possible linkages in alginates: G-G, G-M, M-G, and M-M. So far no lyase specific for only G-G linkages has been described, and here we report the construction of such an enzyme by mutating the gene encoding Klebsiella pneumoniae lyase AlyA (a polysaccharide lyase family 7 lyase), which cleaves both G-G and G-M linkages. After error-prone PCR mutagenesis and high throughput screening of ∼7000 lyase mutants, enzyme variants with a strongly improved G-G specificity were identified. Furthermore, in the absence of Ca(2+), one of these lyases (AlyA5) was found to display no detectable activity against G-M linkages. G-G linkages were cleaved with ∼10% of the optimal activity under the same conditions. The substitutions conferring altered specificity to the mutant enzymes are located in conserved regions in the polysaccharide lyase family 7 alginate lyases. Structure-function analyses by comparison with the known three-dimensional structure of Sphingomonas sp. A1 lyase A1-II' suggests that the improved G-G specificity might be caused by increased affinity for nonproductive binding of the alternating G-M structure.

Summary Seven polyene macrolides with alterations in the polyol region and exocyclic carboxy group were obtained via genetic engineering of the nystatin biosynthesis genes in Streptomyces noursei . In vitro analyses of the compounds for antifungal and hemolytic activities indicated that combinations of several mutations caused additive improvements in their activity-toxicity properties. The two best analogs selected on the basis of in vitro data were tested for acute toxicity and antifungal activity in a mouse model. Both analogs were shown to be effective against disseminated candidosis, while being considerably less toxic than amphotericin B. To our knowledge, this is the first report on polyene macrolides with improved in vivo pharmacological properties obtained by genetic engineering. These results indicate that the engineered nystatin analogs can be further developed into antifungal drugs for human use.