Search

Underwater photographing and image recording are essential for pre-excavation survey and during excavation in underwater archaeology. Unlike photographing on land, all underwater images suffer various quality degradations such as shape distortions, color shift, blur, low contrast, high noise levels and so on. Outcome is very often heavily photographing equipment and photographer dependent. Excavation schedule, weather conditions, and water conditions can put burdens on divers. Usable images are very limited compared to the efforts. In underwater archaeological study in very turbid water such as in the Yellow Sea (between mainland China and the Korean peninsula), underwater photographing is very challenging. In this study, off-site image distortion and color compensation techniques using an image processing/analysis software is investigated as an alternative image quality enhancement method. As sample images, photographs taken during the excavation of 800-year-old Taean Mado Shipwrecks in the Yellow Sea in 2008-2010 were mainly used. Significant enhancement in distortion and color compensation of archived images were obtained by simple post image processing using image processing/analysis software (PicMan) customized for given view ports, lenses and cameras with and without optical axis offsets. Post image processing is found to be very effective in distortion and color compensation of both recent and archived images from various photographing equipment models and configurations. Merits and demerit of in-situ, distortion and color compensated photographing with sophisticated equipment and conventional photographing equipment, which requires post image processing, are compared.

Underwater archaeology relies heavily on photography and video image recording during surveillances and excavations like ordinary archaeological studies on land. All underwater images suffer poor image quality and distortions due to poor visibility, low contrast and blur, caused by differences in refractive indices of water and air, properties of selected lenses and shapes of viewports. In the Yellow Sea (between mainland China and the Korean peninsula), the visibility underwater is far less than 1 m, typically in the range of 30 cm to 50 cm, on even a clear day, due to very high turbidity. For photographing 1 m x 1 m grids underwater, a very wide view angle (180o) fisheye lens with an 8 mm focal length is intentionally used despite unwanted severe barrel-shaped image distortion, even with a dome port camera housing. It is very difficult to map wide underwater archaeological excavation sites by combining severely distorted images. Development of practical compensation methods for distorted underwater images acquired through the fisheye lens is strongly desired. In this study, the source of image distortion in underwater photography is investigated. We have identified the source of image distortion as the mismatching, in optical axis and focal points, between dome port housing and fisheye lens. A practical image distortion compensation method, using customized image processing software, was explored and verified using archived underwater excavation images for effectiveness in underwater archaeological applications. To minimize unusable area due to severe distortion after distortion compensation, practical underwater photography guidelines are suggested.

It has been reported that the scattering cross-sections of resonance Raman spectra strongly depend on the resonance between the laser's excitation energy and the electronic absorption band of pigments in solution. However, the actual collection of scattered photons is affected by diffuse scattering and self-absorption when studying painted colorants in artworks. Quantitative spectroscopic measurements are required to elucidate the apparent resonance Raman cross-sections in both solution and solid. In this study, we explored the excitation-dependent Raman scattering of natural and artificial Korean pigments painted on a wood block with six visible wavelengths. Our study shows that the Raman intensity profile agrees with the emission profile rather than with the absorption. We also assessed the validity of self-absorption and the outgoing resonance mechanism in the solid state for the results.

The extensive archaeological remains at the Baekje Kingdom site of Wanggung-ri, Iksan, in the South Jeolla Province, Korea, include a seventh century workshop area that was later covered by the construction of a Buddhist temple. Remains of glass, gold, and bronze artefacts, and the ceramic crucibles used in the working of these materials, provide evidence for a multi-craft, high-temperature technology. We will report the results of both chemical compositional and lead isotope analyses for Wanggung-ri glass, which is among the earliest lead-silica glass type in East Asia, as well as review the evidence for primary glass production at Wanggung-ri.

Lightweight parts are necessary to improve fuel efficiency and reduce environmental impacts in transportation industry. As a result, there has been a shift away from using conventional metals toward using lighter materials with superior mechanical strength. These new materials typically include titanium alloys, nickel alloys, carbon fiber reinforced plastics (CFRPs), and CFRP-metal stacks, which are classified as advanced materials. However, due to the unique properties of these materials (e.g., high strength, low thermal conductivity, carbon fiber-induced hardness, etc.), the cutting process can be difficult. As a result, various manufacturing issues can occur during the cutting process, such as high tool wear, surface quality deterioration, delamination of the CFRP layer, fiber pull-out, and thermal deformation. In this paper, difficult-to-cut advanced materials were reviewed with regard to the influence of the physical properties of the materials and various defect issues that can occur during the mechanical cutting process. In addition, various approaches to improve the cutting process are introduced, including protecting tools with coatings, altering tool features, using high pressure or cryogenic cooling, extending tool life via ultrasonic vibration machining, and improving product quality and machinability.

Carbon Fiber Reinforced Polymer (CFRP) is a light-weight material with high strength and highly corrosion resistance, and hence is widely applied in aerospace industries. However, milling of CFRP usually generates machining defects (for instance, delamination and pull-out fibres), making processed surface unqualified to meet the requirement of aerospace application. Therefore, prediction for machining quality should be conducted before milling processing to avoid potential loss in massive production. Fracture behaviours of micro-scale fibres and matrix have a significant influence on the final machined surface, and such material removal mechanism can be mainly determined by micro-scale geometrical relationships between carbon fibers and milling teeth. In this paper, a micro-scale geometrical calculation software for CFRP milling is provided based on Dexel model. The software can generate geometrical parameters, for example, cutting angle, cutting length and engagement angle, for the whole milling process. Milling defects and milling forces can be conducted based on those micro-scale geometrical parameters.

Relics of amber were excavated from King Muryeong's tomb constructed in the 6th century on the Korean peninsula. To estimate the provenance, FTIR (Fourier transform infrared spectroscopy) and py/GC/MS (pyrolysis/gas chromatography/mass spectrometry) analysis were utilized. The reference Baltic amber sample was also analyzed with the same method for comparison. The relics were confirmed to be amber from the FTIR analysis where an absorption band near 1150 cm − 1 , characteristic one in Baltic amber, was also observed. In py/GC/MS analysis, pyrolyzed products like butanedioic acid and dehydroabietic acid, known constituents of amber, were observed. In addition, d -fenchyl alcohol, camphor, borneol and butanedioic acid, typical constituents of Baltic amber, were observed in some samples. From this, it appears that some of relics were made from Baltic amber and that Baltic amber was transported to the Korean peninsula in the time of tomb construction.

CFRP (Carbon Fiber Reinforced Plastic) and CFRP-metal stacks have recently been widely used in the aerospace and automobile industries. When CFRP is machined by a brittle fracture mechanism, defect generation behaviors are different from those associated with metal cutting. The machining quality is strongly dependent on the properties of CFRP materials. Therefore, process control for CFRP machining is necessary to minimize the defects of differently manufactured CFRPs. In this study, defects in drilling of CFRP substrates with a variety of fiber directions and resin types are compared with respect to thrust force. An experimental study on material interface detection is carried out to investigate its benefits in process control.

In this study, the potash glass beads of 281 samples in 30 sites analyzed until now were classified according to the chemical composition. And the color, size, manufacturing technique and distribution period were compared. Korea potash glass beads are divided into 3 types depending on the stabilizer content. I, II type is the CaO and content of less than 5%. Relatively, I type has a high CaO and II type has a high . In contrast, III type comprises more than CaO 5%. I, II type is the saltpetre, III type is estimated using plant ash as row material of flux. A review of the properties by type, I type is cobalt blue, copper blue and purple beads. The outer diameter is sized to the range 1.4~7.4mm. Also it was produced by the drawing technique. It was used continuously from BC 1C until around AD 6C. On the other hand, II type is outer diameter of 1.9~3.6mm and a copper blue beads. manufacturing technique is the same as the I type. This seems to have been in use since around AD 1C to 4C. Finally, III type is brown, colorless, amber beads and an outer diameter of about 10mm. It was formed by winding technique and appeared in the tombs of Goryeo and Joseon Dynasty. As a result, 3 types of potash glass beads distributed in Korea is likely to flowing through the various trade routes from different provenances.

A simulation approach for predicting the collection efficiency of inertial impactors was developed by calculating particle trajectories in a Lagrangian reference frame. When numerically predicted collection efficiencies of the electrical low-pressure impactor (ELPI) were compared with the experimental data found in the literature, the agreement was good and the relative difference in cut-off size was less than 12%. Then, balloon-borne impactors having nominal cut-off sizes of 1 μm, 2.5 μm, and 10 μm were designed, and their collection efficiencies were predicted using the present simulation approach. When volumetric sampling flow rate of air introduced to the single-stage round-nozzle impactors was fixed at varying altitude, the cut-off sizes were predicted to decrease from 0.98 μm, 2.47 μm, and 9.86 μm at sea level to 0.47 μm (by 52.0%), 1.70 μm (by 31.2%), and 7.62 μm (by 22.7%) at 16-km-altitude, respectively. When volumetric sampling flow rate was adjusted, the cut-off sizes of the single-stage round-nozzle impactors were estimated to remain almost unchanged with the variation of less than 5.1%, 7.3%, and 10.6%, respectively, at varying altitude in troposphere.

It is characterized and classified as the type of red brown glass beads to compare the chemical composition and manufacturing technique on the 141 samples in 12 sites of the Three Kingdom Period analyzed until now. It can be divided into three types according to the chemical composition of stabilizers(CaO & ) and soda raw materials(MgO & ) on the red brown glass beads except one sample. Type I of high alumina glass is identified as the most common types that is 78.6 % of the distribution ratio at analytical samples and is excavated the most from ruin sites. In contrast, type II, 13.6 % of distribution ratio at analytical samples, is about 5 % CaO and , MgO and at around 1.5 % is similar to the composition of plant ash glass. Type III is that the content of CaO is higher than and the content of MgO and is below 1.5 %. It is the same as the composition of natron glass and its share is the lowest as 7.9 %. Of these, type III is divided into two types according to the content of MgO and . It is identified that manufacturing technique of type I and II is drawing and type III is casting method with microscopic investigations. Type II and III is estimated that raw materials is different because is confirmed in the majority of ruins in spite of the fact that distribution ratio is very low. So, red brown glass beads distributed in Korea Peninsula are divided into three types of glass culture.

Ag-doped ZnO thin films have been fabricated by pulsed laser deposition. Thermal analysis and X-ray photoelectron spectroscopy (XPS) were systematically investigated to verify the doping mechanism of Ag doped ZnO thin film depending on deposition temperature. The fabricated p-type Ag doped ZnO films shows the hole concentration in the range from 4.9x10 16 to 6.0x10 17 cm -3 .

Focused ion beam (FIB) machining of insulators is a crucial process in the rapid prototyping of nanodevices for optical applications. A conductive material is generally coated on the insulator prior to FIB machining to achieve high fabrication accuracy. In this paper, we report on the effects on machining accuracy of four coating materials: Pt, Ni, Ag, and Co. The dimensional accuracy at channel sidewalls was improved by selecting a coating material that induces charge-carrier generation in a small range. The geometric and electrical characteristics of the FIB-machined surfaces were evaluated to elucidate the association between the fabrication accuracy and the range of charge-carrier distribution.