Search

Plasmonic metallic nanoparticles, like Au, can be used to tune the optical properties of photonic nanoarchitectures occurring in butterfly wing scales possessing structural color. The effect of the nanoscale Au depends on the location and the amount deposited in the chitin-based photonic nanoarchitecture. The following three types of Au introduction methods were compared regarding the structural and optical properties of the resulting hybrid bio-nanocomposites: (i) growth of Au nanoparticles inside the nanopores of butterfly wing scales by a light-induced in situ chemical reduction of HAuCl4 in aqueous solution containing sodium citrate, as a new procedure we have developed, (ii) drop-drying of the aqueous Au sol formed during procedure (i) in the bulk liquid phase, and (iii) physical vapor deposition of Au thin film onto the butterfly wing. We investigated all three methods at two different Au concentrations on the wings of laboratory-bred blue-colored male Polyommatus icarus butterflies and characterized the optical properties of the resulting hybrid bio-nanocomposites. We found that the drop-drying and the in situ growth produced comparable redshift in the spectral position of the reflectance maximum associated with the chitin-based photonic nanoarchitecture in the wing scales, while the 5 nm or 15 nm thick Au layers vacuum deposited onto the butterfly wing behaved like an optical filter, without inducing spectral shift. The in situ growth in the photonic nanoarchitecture under intense illumination produced uniform Au nanoparticles located in the pores of the biological template, which is more advantageous for further applications. An additional benefit of this method is that the Au nanoparticles do not aggregate on drying, like in the case of drop-drying of preformed Au nanoparticles from the citrate-stabilized sol.

In the context of digital pedagogy, internet communication platforms, digital media interfaces, applications, and info-communication tools, best practices are stepping up in the educational process and forming a methodology. The focus areas targeted by the questionnaire presented in this study are digital transformation; the smart use of digital tools; characteristics of the learning environment; classroom activities, learning organization, and methodology; content; and curriculum sharing. During the research, the authors asked what were the online communication channels and digital platforms that teachers have effectively used in terms of learning efficiency in distance learning ordered as a result of the COVID-19 emergency in Hungary. The empirical research goal was to explore the conditions among Hungarian teachers with the help of a questionnaire and a semi-structured online interview. Seven thousand teachers were contacted through email, and a return rate of 10.7% was achieved. The questionnaire was filled in online by n = 751 primary teachers. According to the respondents, the most effective tools in the transformation of education are self-made tutorial videos and real-time written and video-based chat.

Electrodeposited Ni65Co35/Cu multilayers were prepared with Cu spacer layer thicknesses between 0.5 nm and 7 nm. Their structure and magnetic and magnetoresistance properties were investigated. An important feature was that the Cu layers were deposited at the electrochemically optimized Cu deposition potential, ensuring a reliable control of the spacer layer thickness to reveal the true evolution of the giant magnetoresistance (GMR). X-ray diffraction indicated satellite reflections, demonstrating the highly coherent growth of these multilayer stacks. All of the multilayers exhibited a GMR effect, the magnitude of which did not show an oscillatory behavior with spacer layer thickness, just a steep rise of GMR around 1.5 nm and then, after 3 nm, it remained nearly constant, with a value around 4%. The high relative remanence of the magnetization hinted at the lack of an antiferromagnetic coupling between the magnetic layers, explaining the absence of oscillatory GMR. The occurrence of GMR can be attributed to the fact that, for spacer layer thicknesses above about 1.5 nm, the adjacent magnetic layers become uncoupled and their magnetization orientation is random, giving rise to a GMR effect. The coercive field and magnetoresistance peak field data also corroborate this picture: with increasing spacer layer thickness, both parameters progressively approached values characteristic of individual magnetic layers. At the end, a critical analysis of previously reported GMR data on electrodeposited Ni-Co/Cu multilayers is provided in view of the present results. A discussion of the layer formation processes in electrodeposited multilayers is also included, together with a comparison with physically deposited multilayers.

Graphene-covered silver nanoparticles were prepared directly on highly oriented pyrolytic graphite substrates and characterized by atomic force microscopy. UV–Vis reflectance spectroscopy was used to measure the shift in the local surface plasmon resonance (LSPR) upon exposure to acetone, ethanol, 2-propanol, toluene, and water vapor. The optical responses were found to be substance-specific, as also demonstrated by principal component analysis. Point defects were introduced in the structure of the graphene overlayer by O2 plasma. The LSPR was affected by the plasma treatment, but it was completely recovered using subsequent annealing. It was found that the presence of defects increased the response for toluene and water while decreasing it for acetone.

We examine the impact of overdue debts in small villages in one of Hungary’s most disadvantaged regions. We find that a significant number of debtors with overdue debts permanently escape from debt collectors. Accordingly, in our sample, overdue debts reduce the likelihood of declared work by 14 percentage points on average. The lack of declared work alone reduces the probability of opening a bank account by 21 percentage points, and overdue debts further reduce it by 9 percentage points. The negative effect of overdue debts on health is almost as large as the positive effect of a high school diploma. In addition, the health-destroying effect extends not only to the debtor but to all members of the household. Therefore, overdue debts create a poverty trap mechanism exacerbating financial exclusion, hence resulting in significant losses for both the individual and society. We recommend paying more attention to smoothing credit cycles and resolving non-performing debt obligations.

Due to its remarkable switching effect in electrical and optical properties, VO2 is a promising material for several applications. However, the stoichiometry control of multivalent vanadium oxides, especially with a rational deposition technique, is still challenging. Here, we propose and optimize a simple fabrication method for VO2 rich layers by the oxidation of metallic vanadium in atmospheric air. It was shown that a sufficiently broad annealing time window of 3.0–3.5 h can be obtained at an optimal oxidation temperature of 400 °C. The presence of VO2 was detected by selected area diffraction in a transmission electron microscope. According to the temperature dependent electrical measurements, the resistance contrast (R30 °C/R100 °C) varied between 44 and 68, whereas the optical switching was confirmed using in situ spectroscopic ellipsometric measurement by monitoring the complex refractive indices. The obtained phase transition temperature, both for the electrical resistance and for the ellipsometric angles, was found to be 49 ± 7 °C, i.e., significantly lower than that of the bulk VO2 of 68 ± 6 °C.

The Internet of Things (IoT) is becoming a regular part of our lives. The devices can be used in many sectors, such as education and in the learning process. The article describes the possibilities of using commonly available devices such as smart wristbands (watches) and eye tracking technology, i.e., using existing technical solutions and methods that rely on the application of sensors while maintaining non-invasiveness. By comparing the data from these devices, we observed how the students’ attention affects their results. We looked for a correlation between eye tracking, heart rate, and student attention and how it all impacts their learning outcomes. We evaluate the obtained data in order to determine whether there is a degree of dependence between concentration and heart rate of students.

It is shown in this overview that modern composition depth profiling methods like secondary neutral mass spectroscopy (SNMS) and glow-discharge – time-of-flight mass spectrometry (GD-ToFMS) can be used to gain highly specific composition depth profile information on electrodeposited alloys. In some cases, cross-sectional transmission electron microscopy was also used for gaining complementary information; nevertheless, the basic component distribution derived with each method exhibited the same basic features. When applying the reverse sputtering direction to SNMS analysis, the near-substrate composition evolution can be revealed with unprecedented precision. Results are presented for several specific cases of electrodeposited alloys and mulitlayers. It is shown that upon d.c. plating from an unstirred solution, the preferentially deposited metal accumulates in the near-substrate zone, and the steady-state alloy composition sets in at about 150-200 nm deposit thickness only. If there is more than one preferentially deposited metal in the alloy, the accumulation zones of these metals occur in the order of the deposition preference. This accumulation zone can be eliminated by well-controlled hydrodynamic conditions (like the application of rotating disc electrodes) or by pulse plating where the systematic decrease in the duty cycle provides a gradual transition from a graded to a uniform composition depth profile. The application of composition depth profile measurements enabled detecting the coincidence in the occurrence of some components in the deposits down to the impurity level. This was exemplified by the GD-ToFMS measurements of Ni-Cu/Cu multilayers where all detected impurities accumulated in the Cu layer. The wealth of information obtained by these methods provides a much more detailed picture than the results normally obtained with bulk analysis through conventional integral depth profiling and help in the elucidation of the side reactions taking place during the plating processes.