Search

We have investigated the Raman spectrum and excitonic effects of the novel two-dimensional Ta$_2$Ni$_3$Te$_5$ structure. The monolayer is an indirect band gap semiconductor with an electronic band gap value of 0.09 eV and 0.38 eV, determined using GGA-PBE and HSE06 exchange-correlation functionals, respectively. Since this structure is energetically, dynamically, and mechanically stable, it could be synthesized as a free-standing material. We identify ten Raman and ten infrared active modes for various laser energies, including those commonly used in Raman spectroscopy experiments. It was also observed that the contribution of Ni atoms is minimal in most Raman vibrational modes. In contrast, most infrared vibrational modes do not involve the vibration of the Ta atoms. As far as the optical properties are concerned, this monolayer shows a robust linear anisotropy, an exciton binding energy of 287 meV, and also presents a high reflectivity in the ultraviolet region, which is more intense for linear light polarization along the x-direction.

Niobium chloride (Nb3Cl8) is a layered 2D semiconducting material with many exotic properties including a breathing kagome lattice, a topological flat band in its band structure, and a crystal structure that undergoes a structural and magnetic phase transition at temperatures below 90 K. Despite being a remarkable material with fascinating new physics, the understanding of its phonon properties is at its infancy. In this study, we investigate the phonon dynamics of Nb3Cl8 in bulk and few layer flakes using polarized Raman spectroscopy and density functional theory (DFT) analysis to determine the material's vibrational modes, as well as their symmetrical representations and atomic displacements. We experimentally resolved 12 phonon modes, 5 of which are A1g modes while the remaining 7 are Eg modes, which is in strong agreement with our DFT calculation. Layer-dependent results suggest that the Raman peak positions are mostly insensitive to changes in layer thickness, while peak intensity and FWHM are affected. Raman measurements as a function of excitation wavelength (473-785 nm) show a significant increase of the peak intensities when using a 473 nm excitation source, suggesting a near resonant condition. Temperature-dependent Raman experiments carried out above and below the transition temperature did not show any change in the symmetries of the phonon modes, suggesting that the structural phase transition is likely from the high temperature P3m1 phase to the low-temperature R3m phase. Magneto-Raman measurements carried out at 140 and 2 K between -2 to 2 T show that the Raman modes are not magnetically coupled. Overall, our study presented here significantly advances the fundamental understanding of layered Nb3Cl8 material which can be further exploited for future applications., Comment: 18 pages, 8 figures, 1 table

Two-dimensional lateral heterojunctions are basic components for low-power and flexible optoelectronics. In contrast to monolayers, devices based on few-layer lateral heterostructures could offer superior performance due to their lower susceptibility to environmental conditions. Here, we report the controlled synthesis of multi-junction bilayer lateral heterostructures based on MoS2-WS2 and MoSe2-WSe2, where the hetero-junctions are created via sequential lateral edge-epitaxy that happens simultaneously in both the first and the second layer. With respect to their monolayer counterparts, bilayer lateral heterostructures yield nearly one order of magnitude higher rectification currents. They also display a clear photovoltaic response, with short circuit currents ~103 times larger than those extracted from the monolayers, in addition to room-temperature electroluminescence. The superior performance of bilayer heterostructures significantly expands the functionalities of 2D crystals.

Laser-assisted chemical modification is demonstrated on ultra-thin transition-metal dichalcogenides (TMDs), locally replacing selenium by sulfur atoms. The photo-conversion process takes place in a controlled reactive gas environment and the heterogeneous reaction rates are monitored via in situ real-time Raman and photoluminescence spectroscopies. The spatially localized photo-conversion resulted in a heterogeneous TMD structure, with chemically distinct domains, where the initial high crystalline quality of the film is not affected during the process. This has been further confirmed via transmission electron microscopy as well as Raman and Photoluminescence spatial maps. Our study demonstrates the potential of laser-assisted chemical conversion for on-demand synthesis of heterogeneous two-dimensional materials with applications in nanodevices.

Near-field optical microscopy can be used as a viable route to understand the nanoscale material properties below the diffraction limit. On the other hand, atomically thin two-dimensional (2D) transition metal dichalcogenides (TMDs) are the materials of recent interest to study the spatial confinement of charge carriers, photon, and phonons. Heterostructures based on Mo or W based monolayer TMDs form type-II band alignment, and hence the optically excited carriers can be easily separated for applications pertaining to photonics and electronics. Mapping these spatially confined carriers or photons in a heterostructure with nanoscale resolution as well as their recombination behavior at the interfaces are necessary for the effective use of these materials in future high performance optoelectronics. We performed tip-enhanced photoluminescence (TEPL) imaging to increase the spatial resolution on multi-junction monolayer MoSe2-WSe2 lateral heterostructures grown by chemical vapor deposition (CVD) method. The near-field nano-PL emission map was used to distinguish the presence of distinct crystalline boundaries and the heterogeneities across the interfaces. This method significantly improves the nanoscale resolution of 2D materials, especially for understanding the PL emission properties at the vicinity of hetero-interfaces.

Two-dimensional monolayer transition metal dichalcogenides (TMDs) have unique optical and electronic properties for applications pertaining to field effect transistors, light emitting diodes, photodetectors, and solar cells. Vertical interfacing of WS2 and MoS2 layered materials in combination with other families of 2D materials were previously reported. On the other hand, lateral heterostructures are particularly promising for the spatial confinement of charged carriers, excitons and phonons within an atomically-thin layer. In the lateral geometry, the quality of the interface in terms of the crystallinity and optical properties is of paramount importance. Using plasmonic near-field tip-enhanced technology, we investigated the detailed nanoscale photoluminescence (nano-PL) characteristics of the hetero-interface in a monolayer WS2-MoS2 lateral heterostructure. Focusing the laser excitation spot at the apex of a plasmonic tip improved the PL spatial resolution by an order of magnitude compared to the conventional far-field PL. Nano-PL spatial line profiles were found to be more pronounced and enhanced at the interfaces. By analyzing the spectral signals of the heterojunctions, we obtained a better understanding of these direct band gap layered semiconductors, which may help to design next-generation smart optoelectronic devices.

Two-dimensional (2D) heterojunctions display a remarkable potential for application in high performance, low power electro-optical systems. p-n junctions based on vertically stacked heterostructures have shown very promising performance as tunneling transistors, light emitting devices and photodetectors, and as photovoltaic cells . Although complex vertical heterostructures were fabricated via van der Waals stacking of different 2D materials, atomically sharp multi-junctions in lateral heterostructures is a quite challenging task, but a viable route towards the development of commercial applications. Previously reported approaches to obtain single-junction lateral heterostructures of the type MoX2-WX2 (X= S and/or Se), involve either a single-step or a two-step growth process. However, these methods lack the flexibility to control the lateral width of the TMD domain as well as its composition. Here, we report a simple and yet scalable synthesis approach for the fabrication of lateral multi-junction heterostructures based on the combination of different TMD monolayers [MoX2-WX2 (X2 = S2, Se2 or SSe)]. Atomically sharp lateral junctions are sequentially synthesized from solid precursors by changing only the reactive gas environment in the presence of water vapor. This allows to selectively control the water-induced oxidation, volatilization and hence the relative amount of a specific metal oxide vapor, leading to the selective edge-epitaxial growth of either MoX2 or WX2. Spatially dependent photoluminescence and atomic-resolution images confirm the high crystallinity of the monolayers and the seamless lateral connectivity between the different TMD domains. These findings could be extended to other families of 2D materials, and creates the foundation towards the development of complex and atomically thin in-plane super-lattices, devices and integrated circuits.

Individual monolayers of metal dichalcogenides are atomically thin two-dimensional crystals with attractive physical properties different from their bulk layered counterpart. Here we describe the direct synthesis of WS2 monolayers with triangular morphologies and strong room-temperature photoluminescence (PL). Bulk WS2 does not present PL due to its indirect band gap nature. The edges of these monolayers exhibit PL signals with extraordinary intensity, around 25 times stronger than the platelets center. The structure and composition of the platelet edges appear to be critical for the PL enhancement effect. Electron diffraction revealed that platelets present zigzag edges, while first-principles calculations indicate that sulfur-rich zigzag WS2 edges possess metallic edge states, which might tailor the optical response reported here. These novel 2D nanoscale light sources could find diverse applications including the fabrication of flexible/transparent/low-energy optoelectronic devices.

We report the observation of the superconducting proximity effect in nanoribbons of a candidate topological insulator (Bi2Se3) which is interfaced with superconducting (tungsten) contacts. We observe a supercurrent and multiple Andreev reflections for channel lengths that are much longer than the inelastic and diffusive thermal lengths deduced from normal state transport. This suggests that the proximity effect couples preferentially to a ballistic surface transport channel, even in the presence of a coexisting diffusive bulk channel. When a magnetic field is applied perpendicular to the plane of the nanoribbon, we observe magnetoresistance oscillations that are periodic in magnetic field. Quantitative comparison with a model of vortex blockade relates the occurrence of these oscillations to the formation of Pearl vortices in the region of proximity induced superconductivity., Comment: Submitted to Physical Review B (regular article)

We synthesize and study the structural and optical properties of nanocrystalline graphene monofluoride and graphite monofluoride, which are carbon-based wide bandgap materials. Using laser excitations 2.41 - 5.08 eV, we identify six emission modes of graphite monofluoride, spanning the visible spectrum from red to violet. The energy and linewidth of the modes point to defect-induced midgap states as the source of the photoemission. We discuss possible candidates. Our findings open the window to electro-optical applications of graphene fluoride., Comment: 11 pages including supporting information, 2 figures