Search

The challenges in dense ultra-reliable low-latency communication networks to deliver the required service to multiple devices are addressed by three main technologies: multiple antennas at the base station (MISO), rate splitting multiple access (RSMA) with private and common message encoding, and simultaneously transmitting and reflecting reconfigurable intelligent surfaces (STAR-RIS). Careful resource allocation, encompassing beamforming and RIS optimization, is required to exploit the synergy between the three. We propose an alternating optimization-based algorithm, relying on minorization-maximization. Numerical results show that the achievable second-order max-min rates of the proposed scheme outperform the baselines significantly. MISO, RSMA, and STAR-RIS all contribute to enabling ultra-reliable low-latency communication (URLLC)., Comment: Accepted at 2025 International Conference on Mobile and Miniaturized Terahertz Systems (ICMMTS)

In this paper, we develop energy-efficient schemes for multi-user multiple-input single-output (MISO) broadcast channels (BCs), assisted by reconfigurable intelligent surfaces (RISs). To this end, we consider three architectures of RIS: locally passive diagonal (LP-D), globally passive diagonal (GP-D), and globally passive beyond diagonal (GP-BD). In a globally passive RIS, the power of the output signal of the RIS is not greater than its input power, but some RIS elements can amplify the signal. In a locally passive RIS, every element cannot amplify the incident signal. We show that these RIS architectures can substantially improve energy efficiency (EE) if the static power of the RIS elements is not too high. Moreover, GP-BD RIS, which has a higher complexity and static power than LP-D RIS and GP-D RIS, provides better spectral efficiency, but its EE performance highly depends on the static power consumption and may be worse than its diagonal counterparts., Comment: Accepted at 25th IEEE International Workshop on Signal Processing Advances in Wireless Communications (SPAWC)

This paper addresses the problem of maximizing the capacity of a multiple-input multiple-output (MIMO) link assisted by a beyond-diagonal reconfigurable intelligent surface (BD-RIS). We maximize the capacity by alternately optimizing the transmit covariance matrix, and the BD-RIS scattering matrix, which, according to network theory, should be unitary and symmetric. These constraints make the optimization of BD-RIS more challenging than that of diagonal RIS. To find a stationary point of the capacity we maximize a sequence of quadratic problems in the manifold of unitary matrices. This leads to an efficient algorithm that always improves the capacity obtained by a diagonal RIS. Through simulation examples, we study the capacity improvement provided by a passive BD-RIS architecture over the conventional RIS model in which the phase shift matrix is diagonal., Comment: 5 pages, 4 figures

Reconfigurable intelligent surface (RIS) architectures not limited to diagonal phase shift matrices have recently been considered to increase their flexibility in shaping the wireless channel. One of these beyond-diagonal RIS or BD-RIS architectures leads to a unitary and symmetric RIS matrix. In this letter, we consider the problem of maximizing the signal-to-noise ratio (SNR) in single and multiple antenna links assisted by a BD-RIS. The Max-SNR problem admits a closed-form solution based on the Takagi factorization of a certain complex and symmetric matrix. This allows us to solve the max-SNR problem for SISO, SIMO, and MISO channels., Comment: 5 pages, 2 figures

We address the problem of interference leakage (IL) minimization in the $K$-user multiple-input multiple-output (MIMO) interference channel (IC) assisted by a reconfigurable intelligent surface (RIS). We describe an iterative algorithm based on block coordinate descent to minimize the IL cost function. A reformulation of the problem provides a geometric interpretation and shows interesting connections with envelope precoding and phase-only zero-forcing beamforming problems. As a result of this analysis, we derive a set of necessary (but not sufficient) conditions for a phase-optimized RIS to be able to perfectly cancel the interference on the $K$-user MIMO IC., Comment: Accepted at ICASSP 2023 - 2023 IEEE International Conference on Acoustics, Speech and Signal Processing (ICASSP)

Quality assessment is a key element for the evaluation of hardware and software involved in image and video acquisition, processing, and visualization. In the medical field, user-based quality assessment is still considered more reliable than objective methods, which allow the implementation of automated and more efficient solutions. Regardless of increasing research in this topic in the last decade, defining quality standards for medical content remains a non-trivial task, as the focus should be on the diagnostic value assessed from expert viewers rather than the perceived quality from na\"{i}ve viewers, and objective quality metrics should aim at estimating the first rather than the latter. In this paper, we present a survey of methodologies used for the objective quality assessment of medical images and videos, dividing them into visual quality-based and task-based approaches. Visual quality based methods compute a quality index directly from visual attributes, while task-based methods, being increasingly explored, measure the impact of quality impairments on the performance of a specific task. A discussion on the limitations of state-of-the-art research on this topic is also provided, along with future challenges to be addressed., Comment: Submitted for peer review at Multimedia Tools and Applications

Several technological and scientific advances have been achieved recently in the fields of immersive systems, which are offering new possibilities to applications and services in different communication domains, such as entertainment, virtual conferencing, working meetings, social relations, healthcare, and industry. Users of these immersive technologies can explore and experience the stimuli in a more interactive and personalized way than previous technologies. Thus, considering the new technological challenges related to these systems and the new perceptual dimensions and interaction behaviors involved, a deep understanding of the users' Quality of Experience is required to satisfy their demands and expectations. In this sense, it is essential to foster the research on evaluating the QoE of immersive communication systems, since this will provide useful outcomes to optimize them and to identify the factors that can deteriorate the user experience. With this aim, subjective tests are usually performed following standard methodologies, which are designed for specific technologies and services. Although numerous user studies have been already published, there are no recommendations or standards that define common testing methodologies to be applied to evaluate immersive communication systems, such as those developed for images and video. Therefore, a revision of the QoE evaluation methods designed for previous technologies is required to develop robust and reliable methodologies for immersive communication systems. Thus, the objective of this paper is to provide an overview of existing immersive communication systems and related user studies, which can help on the definition of basic guidelines and testing methodologies to be used when performing user tests of immersive communication systems, such as 360-degree video-based telepresence, avatar-based social VR, cooperative AR, etc., Comment: Frontiers in Signal Processing

In this work, we propose a Deep neural network-assisted Particle Filter-based (DePF) approach to address the Mobile User (MU) joint synchronization and localization (sync\&loc) problem in ultra dense networks. In particular, DePF deploys an asymmetric time-stamp exchange mechanism between the MUs and the Access Points (APs), which, traditionally, provides us with information about the MUs' clock offset and skew. However, information about the distance between an AP and an MU is also intrinsic to the propagation delay experienced by exchanged time-stamps. In addition, to estimate the angle of arrival of the received synchronization packet, DePF draws on the multiple signal classification algorithm that is fed by Channel Impulse Response (CIR) experienced by the sync packets. The CIR is also leveraged on to determine the link condition, i.e. Line-of-Sight (LoS) or Non-LoS. Finally, to perform joint sync\&loc, DePF capitalizes on particle Gaussian mixtures that allow for a hybrid particle-based and parametric Bayesian Recursive Filtering (BRF) fusion of the aforementioned pieces of information and thus jointly estimate the position and clock parameters of the MUs. The simulation results verifies the superiority of the proposed algorithm over the state-of-the-art schemes, especially that of Extended Kalman filter- and linearized BRF-based joint sync\&loc. In particular, only drawing on the synchronization time-stamp exchange and CIRs, for 90$\%$of the cases, the absolute position and clock offset estimation error remain below 1 meter and 2 nanoseconds, respectively.

This paper analyzes the joint assessment of quality, spatial and social presence, empathy, attitude, and attention in three conditions: (A)visualizing and rating the quality of contents in a Head-Mounted Display (HMD), (B)visualizing the contents in an HMD,and (C)visualizing the contents in an HMD where participants can see their hands and take notes. The experiment simulates an immersive communication where participants attend conversations of different genres and from different acquisition perspectives in the context of international experiences. Video quality is evaluated with Single-Stimulus Discrete Quality Evaluation (SSDQE) methodology. Spatial and social presence are evaluated with questionnaires adapted from the literature. Initial empathy is assessed with Interpersonal Reactivity Index(IRI) and a questionnaire is designed to evaluate attitude. Attention is evaluated with 3 questions that had pass/fail answers. 54 participants were evenly distributed among A, B, and C conditions taking into account their international experience backgrounds, obtaining a diverse sample of participants. The results from the subjective test validate the proposed methodology in VR communications, showing that video quality experiments can be adapted to conditions imposed by experiments focused on the evaluation of socioemotional features in terms of contents of long-duration, actor and observer acquisition perspectives, and genre. In addition, the positive results related to the sense of presence imply that technology can be relevant in the analyzed use case. The acquisition perspective greatly influences social presence and all the contents have a positive impact on all participants on their attitude towards international experiences. The annotated dataset, Student Experiences Around the World dataset (SEAW-dataset), obtained from the experiment is made publicly available., Comment: IEEE Transactions on Affective Computing, Early Access

In this work, we study the joint synchronization and localization (sync&loc) of Mobile Nodes (MNs) in ultra dense networks. In particular, we deploy an asymmetric timestamp exchange mechanism between MNs and Access Nodes (ANs), that, traditionally, provides us with information about the MNs' clock offset and skew. However, information about the distance between an AN and a MN is also intrinsic to the propagation delay experienced by exchanged time-stamps. In addition, we utilize Angle of Arrival (AoA) estimation to determine the incoming direction of time-stamp exchange packets, which gives further information about the MNs' location. Finally, we employ Bayesian Recursive Filtering (BRF) to combine the aforementioned pieces of information and jointly estimate the position and clock parameters of MNs. The simulation results indicate that the Root Mean Square Errors (RMSEs) of position and clock offset estimation are kept below 1 meter and 1 ns, respectively., Comment: IEEE International Symposium on Networks, Computers and Communications (ISNCC 2020)

With the coming of age of virtual/augmented reality and interactive media, numerous definitions, frameworks, and models of immersion have emerged across different fields ranging from computer graphics to literary works. Immersion is oftentimes used interchangeably with presence as both concepts are closely related. However, there are noticeable interdisciplinary differences regarding definitions, scope, and constituents that are required to be addressed so that a coherent understanding of the concepts can be achieved. Such consensus is vital for paving the directionality of the future of immersive media experiences (IMEx) and all related matters. The aim of this white paper is to provide a survey of definitions of immersion and presence which leads to a definition of immersive media experience (IMEx). The Quality of Experience (QoE) for immersive media is described by establishing a relationship between the concepts of QoE and IMEx followed by application areas of immersive media experience. Influencing factors on immersive media experience are elaborated as well as the assessment of immersive media experience. Finally, standardization activities related to IMEx are highlighted and the white paper is concluded with an outlook related to future developments.

In this work, we propose a hybrid Bayesian approach towards clock offset and skew estimation, thereby synchronizing large scale networks. In particular, we demonstrate the advantage of Bayesian Recursive Filtering (BRF) in alleviating time-stamping errors for pairwise synchronization. Moreover, we indicate the benefit of Factor Graph (FG), along with Belief Propagation (BP) algorithm in achieving high precision end-to-end network synchronization. Finally, we reveal the merit of hybrid synchronization, where a large-scale network is divided into local synchronization domains, for each of which a suitable synchronization algorithm (BP- or BRF-based) is utilized. The simulation results show that, despite the simplifications in the hybrid approach, the Root Mean Square Errors (RMSEs) of clock offset and skew estimation remain below 5 ns and 0.3 ppm, respectively., Comment: arXiv admin note: text overlap with arXiv:2002.12660

Free-Viewpoint Video (FVV) systems allow the viewers to freely change the viewpoints of the scene. In such systems, view synthesis and compression are the two main sources of artifacts influencing the perceived quality. To assess this influence, quality evaluation studies are often carried out using conventional displays and generating predefined navigation trajectories mimicking the possible movement of the viewers when exploring the content. Nevertheless, as different trajectories may lead to different conclusions in terms of visual quality when benchmarking the performance of the systems, methods to identify critical trajectories are needed. This paper aims at exploring the impact of exploration trajectories (defined as Hypothetical Rendering Trajectories: HRT) on perceived quality of FVV subjectively and objectively, providing two main contributions. Firstly, a subjective assessment test including different HRTs was carried out and analyzed. The results demonstrate and quantify the influence of HRT in the perceived quality. Secondly, we propose a new objective video quality assessment measure to objectively predict the impact of HRT. This measure, based on Sketch-Token representation, models how the categories of the contours change spatially and temporally from a higher semantic level. Performance in comparison with existing quality metrics for FVV, highlight promising results for automatic detection of most critical HRTs for the benchmark of immersive systems., Comment: 11 pages, 7 figures