Search

Studies of fish growth response to changes in dietary protein and energy content are often conducted with fish fed to apparent satiation or at fixed percentages of their body mass. Such designs result in simultaneous changes in protein and non-protein energy intake, thereby failing to distinguish their separate effects on nutrient partitioning and growth. The present study was designed to address this limitation and test the existence of distinct protein- and non-protein energy-dependent growth phases in Nile tilapia (Oreochromis niloticus). All-male Nile tilapia (63 g, SD = 1.3) were subjected to an 8 × 2 factorial design consisting of eight levels of digestible protein (DP) intake (0.44-1.25 g/day) and two levels of non-protein digestible energy (NPDE) intake (16.0 and 22.4 kJ/day). Fish (n = 960) were housed in 60-litre tanks with two replicates per treatment and hand-fed twice a day for 42 days. Nutrient balances were calculated from changes in body mass, analysed body composition and digestible nutrient intake. Linear regression models were compared to linear-plateau regression models to determine whether protein gain followed distinct protein- and non-protein energy-dependent phases or not. Body mass gain increased linearly with increasing DP intake and was significantly higher (2.6 vs 2.3 g/d, P < 0.05) in fish receiving a high NPDE intake. This increase mainly reflected a higher mean fat gain (0.29 vs 0.20 g/d) rather than a higher protein gain (0.42 vs 0.39 g/d) in fish fed a high vs low level of NPDE intake. The comparison of linear and linear-plateau models did not give clear support for the presence of distinct protein and non-protein energy-dependent phases in protein gain. These results indicate that non-protein energy intake has a modest protein-sparing potential, and that protein gain is simultaneously limited by protein and energy intake in Nile tilapia., (Copyright © 2022 The Authors. Published by Elsevier B.V. All rights reserved.)

Parasitic wasps use specialized needle-like structures, ovipositors, to drill into substrates to reach hidden hosts. The external ovipositor (terebra) consists of three interconnected, sliding elements (valvulae), which are moved reciprocally during insertion. This presumably reduces the required pushing force on the terebra and limits the risk of damage whilst probing. Although this is an important mechanism, it is still not completely understood how the actuation of the valvulae is achieved, and it has only been studied with the ovipositor in rest position. Additionally, very little is known about the magnitude of the forces generated during probing. We used synchrotron X-ray microtomography to reconstruct the actuation mechanism of the parasitic wasp Diachasmimorpha longicaudata (Braconidae) in four distinct phases of the probing cycle. We show that only the paired first valvulae of the terebra move independently, while the second valvula moves with the metasoma ('abdomen'). The first valvula movements are initiated by rotation of one chitin plate (first valvifer) with respect to another such plate (second valvifer). This is achieved indirectly by muscles connecting the non-rotating second valvifer and the abdominal ninth tergite. Contrary to previous reports, we found muscle fibres running inside the terebra, although their function remains unclear. The estimated maximal forces that can be exerted by the first valvulae are small (protraction 1.19 mN and retraction 0.874 mN), which reduces the risk of buckling, but are sufficient for successful probing. The small net forces of the valvulae on the substrate may still lead to buckling of the terebra; we show that the sheaths surrounding the valvulae prevent this by effectively increasing the diameter and second moment of area of the terebra. Our findings improve the comprehension of hymenopteran probing mechanisms, the function of the associated muscles, and the forces and damage-limiting mechanism that are involved in drilling a slender terebra into a substrate., (© 2020 The Authors. Journal of Anatomy published by John Wiley & Sons Ltd on behalf of Anatomical Society.)

Despite the importance of intraoral food transport and swallowing, relatively few studies have examined the biomechanics of these behaviors in non-tetrapods, which lack a muscular tongue. Studies show that elasmobranch and teleost fishes generate water currents as a 'hydrodynamic tongue' that presumably transports food towards and into the esophagus. However, it remains largely unknown how specific musculoskeletal motions during transport correspond to food motion. Previous studies of white-spotted bamboo sharks ( Chiloscyllium plagiosum ) hypothesized that motions of the hyoid, branchial arches and pectoral girdle, generate caudal motion of the food through the long oropharynx of modern sharks. To test these hypotheses, we measured food and cartilage motion with XROMM during intra-oropharyngeal transport and swallowing ( N =3 individuals, 2-3 trials per individual). After entering the mouth, food does not move smoothly toward the esophagus, but rather moves in distinct steps with relatively little retrograde motion. Caudal food motion coincides with hyoid elevation and a closed mouth, supporting earlier studies showing that hyoid motion contributes to intra-oropharyngeal food transport by creating caudally directed water currents. Little correspondence between pectoral girdle and food motion was found, indicating minimal contribution of pectoral girdle motion. Transport speed was fast as food entered the mouth, slower and step-wise through the pharyngeal region and then fast again as it entered the esophagus. The food's static periods in the step-wise motion and its high velocity during swallowing could not be explained by hyoid or girdle motion, suggesting these sharks may also use the branchial arches for intra-oropharyngeal transport and swallowing., Competing Interests: Competing interestsThe authors declare no competing or financial interests., (© 2019. Published by The Company of Biologists Ltd.)

Providing a broiler chicken embryo with a lighting schedule during incubation may stimulate leg bone development. Bone development may be stimulated through melatonin, a hormone released in darkness that stimulates bone development, or increased activity in embryos exposed to a light-dark rhythm. Aim was to investigate lighting conditions during incubation and leg bone development in broiler embryos, and to reveal the involved mechanisms. Embryos were incubated under continuous cool white 500 lux LED light (24L), continuous darkness (24D), or 16h of light, followed by 8h of darkness (16L:8D) from the start of incubation until hatching. Embryonic bone development largely takes place through cartilage formation (of which collagen is an important component) and ossification. Expression of genes involved in cartilage formation (col1α2, col2α1, and col10α1) and ossification (spp1, sparc, bglap, and alpl) in the tibia on embryonic day (ED)13, ED17, and at hatching were measured through qPCR. Femur and tibia dimensions were determined at hatch. Plasma growth hormone and corticosterone and pineal melatonin concentrations were determined every 4h between ED18.75 and ED19.5. Embryonic heart rate was measured twice daily from ED12 till ED19 as a reflection of activity. No difference between lighting treatments on gene expression was found. 24D resulted in higher femur length and higher femur and tibia weight, width, and depth at hatch than 16L:8D. 24D furthermore resulted in higher femur length and width and tibia depth than 24L. Embryonic heart rate was higher for 24D and 16L:8D in both its light and dark period than for 24L, suggesting that 24L embryos may have been less active. Melatonin and growth hormone showed different release patterns between treatments, but the biological significance was hard to interpret. To conclude, 24D resulted in larger leg bones at hatch than light during incubation, but the underlying pathways were not clear from present data., Competing Interests: Authors Carla W. van der Pol, Inge A. M. van Roovert-Reijrink, and Margaretha H. van Eijk-Priester are employed by HatchTech B.V. This does not alter the authors' adherence to PLOS ONE policies on sharing data and materials. No consultancy, marketed products, patents, or products in development related to the materials discussed in this manuscript exist at the time of writing.

Background: Mucus and mucus glands are important features of the amphibian cutis. In tree frogs, the mucus glands and their secretions are crucial components of the adhesive digital pads of these animals. Despite a variety of hypothesised functions of these components in tree frog attachment, the functional morphology of the digital mucus glands and the chemistry of the digital mucus are barely known. Here, we use an interdisciplinary comparative approach to analyse these components, and discuss their roles in tree frog attachment., Results: Using synchrotron micro-computer-tomography, we discovered in the arboreal frog Hyla cinerea that the ventral digital mucus glands differ in their morphology from regular anuran mucus glands and form a subdermal gland cluster. We show the presence of this gland cluster also in several other-not exclusively arboreal-anuran families. Using cryo-histochemistry as well as infrared and sum frequency generation spectroscopy on the mucus of two arboreal ( H. cinerea and Osteopilus septentrionalis ) and of two terrestrial, non-climbing frog species ( Pyxicephalus adspersus and Ceratophrys cranwelli ), we find neutral and acidic polysaccharides, and indications for proteinaceous and lipid-like mucus components. The mucus chemistry varies only little between dorsal and ventral digital mucus in H. cinerea , ventral digital and abdominal mucus in H. cinerea and O. septentrionalis , and between the ventral abdominal mucus of all four studied species., Conclusions: The presence of a digital mucus gland cluster in various anuran families, as well as the absence of differences in the mucus chemistry between arboreal and non-arboreal frog species indicate an adaptation towards generic functional requirements as well as to attachment-related requirements. Overall, this study contributes to the understanding of the role of glands and their secretions in tree frog attachment and in bioadhesion in general, as well as the evolution of anurans., Competing Interests: Competing interestsThe authors declare that they have no competing interests.

Claw disorders in dairy cattle have negative effects on both animal welfare and farm profits. One possible cause of claw disorders is the high mechanical load that cattle encounter when walking and standing on hard concrete floors. It is currently unclear how high mechanical loading leads to claw disorders and lameness. It is hypothesized that mechanical loading leads to compression of the soft tissue in the claws, which may directly or indirectly lead to tissue damage. Roentgen stereophotogrammetry in combination with CT-reconstruction was used to detect deformations in the distal hind limbs of dissected specimens of dairy cows under a range of loading regimens. The load was recorded in 3D using a force plate. Even at moderate load levels, such as during standing, the soft tissue layer was considerably compressed (>10% of the initial thickness), especially where the sole rests on the floor. Compression increases with increased and/or prolonged load. Most importantly, the location of areas of highest compression coincides with the locations where sole ulcers are most often found. These findings provide insight into the etiology of bovine claw disorders, and may contribute to solutions to reduce them., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

Many parasitic wasps use slender and steerable ovipositors to lay eggs in hosts hidden in substrates, but it is currently unknown how steering is achieved. The ovipositors generally consist of three longitudinally connected elements, one dorsal and two ventral valves that can slide along each other. For the parasitic wasp Diachasmimorpha longicaudata , it has been shown that protraction of the ventral valves causes incurving of the ventral valves towards the dorsal one, which results in a change in probing direction. We hypothesize that this shape change is due to differences in bending stiffness along the ovipositor. Alignment of the stiff tip of the dorsal valve with a more flexible ventral S-shaped region situated just behind the tip straightens this S-bend and results in upwards rotation of the ventral tip. We show that the S-shaped region of the ventral valves has a low bending stiffness because it contains soft materials such as resilin. In contrast, the large cross-sectional area of the dorsal valve tip area probably results in a high bending stiffness. Elsewhere, the dorsal valve is less stiff than the ventral valves. Our results support the hypothesis that the interaction between the stiff dorsal valve portion and the more flexible S-shaped region co-determines the configurational tip changes required for steering the ovipositor in any desired direction along curved paths in the substrate. This provides novel insights in the understanding of steering mechanisms of the hymenopteran ovipositor, and for application in man-made probes., Competing Interests: Competing interestsThe authors declare no competing or financial interests., (© 2019. Published by The Company of Biologists Ltd.)

Hemipterans, mosquitoes, and parasitic wasps probe in a variety of substrates to find hosts for their larvae or food sources. Probes capable of sensing and precise steering enable insects to navigate through solid substrates without visual information and to reach targets that are hidden deep inside the substrate. The probes belong to non-related taxa and originate from abdominal structures (wasps) or mouthparts (hemipterans and mosquitoes), but nevertheless share several morphological characteristics. Although the transport function clearly differs (egg laying and acquisition of liquid food), the functional demands on the mechanical behaviour of the probe within the substrate tend to be similar. The probe needs to be thin to limit substrate deformation, and long, in order to attain substantial path lengths or depths. We linked the morphology across taxa to the different functional requirements, to provide insights into the biology of probing insects and the evolution of their probes. Current knowledge of insect probes is spread over many taxa, which offers the possibility to derive general characteristics of insect probing. Buckling during initial puncturing is limited by external support mechanisms. The probe itself consist of multiple (3-6) parts capable of sliding along one another. This multi-part construction presumably enables advancement and precise three-dimensional steering of the probe through the substrate with very low net external pushing forces, preventing buckling during substrate penetration. From a mechanical viewpoint, a minimum of three elements is required for 3D steering and volumetric exploration, as realised in the ovipositors of wasps. More elements, such as in six-element probes of mosquitoes, may enhance friction in soft substrates. Alternatively, additional elements can have functions other than 'drilling', such as saliva injection in mosquitoes. Despite the gross similarities, probes show differences in their cross sections, tip morphologies, relative lengths of their elements, and the shape of their interconnections. The hypothesis is that the probe morphology is influenced by the substrate properties, which are mostly unknown. Correlating the observed diversity to substrate-specific functional demands is therefore currently impossible. We conclude that a multipart probe with sliding elements is highly effective for volumetric substrate probing. Shared functional demands have led to an evolutionary convergence of slender multi-element probes in disparate insect taxa. To fully understand 3D probing, it is necessary to study the sensory and material properties, as well as the detailed kinematics and dynamics of the various probes in relation to the nature of the selective pressure originating from the species-specific substrates. Such knowledge will deepen our understanding of probing mechanisms and may support the development of slender, bio-inspired probes., (© 2018 The Authors. Biological Reviews published by John Wiley & Sons Ltd on behalf of Cambridge Philosophical Society.)

There are indications that lighting schedules applied during incubation can affect leg health at hatching and during rearing. The current experiment studied effects of lighting schedule: continuous light (24L), 12 hours of light, followed by 12 hours of darkness (12L:12D), or continuous darkness (24D) throughout incubation of broiler chicken eggs on the development and strength of leg bones, and the role of selected hormones in bone development. In the tibiatarsus and femur, growth and ossification during incubation and size and microstructure at day (D)0, D21, and D35 post hatching were measured. Plasma melatonin, growth hormone, and IGF-I were determined perinatally. Incidence of tibial dyschondroplasia, a leg pathology resulting from poor ossification at the bone's epiphyseal plates, was determined at slaughter on D35. 24L resulted in lower embryonic ossification at embryonic day (E)13 and E14, and lower femur length, and lower tibiatarsus weight, length, cortical area, second moment of area around the minor axis, and mean cortical thickness at hatching on D0 compared to 12L:12D especially. Results were long term, with lower femur weight and tibiatarsus length, cortical and medullary area of the tibiatarsus, and second moment of area around the minor axis, and a higher incidence of tibial dyschondroplasia for 24L. Growth hormone at D0 was higher for 24D than for 12L:12D, with 24L intermediate, but plasma melatonin and IGF-I did not differ between treatments, and the role of plasma melatonin, IGF-I, and growth hormone in this process was therefore not clear. To conclude, in the current experiment, 24L during incubation of chicken eggs had a detrimental effect on embryonic leg bone development and later life leg bone strength compared to 24D and 12L:12D, while the light-dark rhythm of 12L:12D may have a stimulating effect on leg health., Competing Interests: Authors Carla W. van der Pol, Inge A. M. van Roovert-Reijrink, Conny M. Maatjens, and Jan Wijnen are employed by HatchTech B.V. This does not alter our adherence to PLOS ONE policies on sharing data and materials. No consultancy, marketed products, patents, or products in development related to the materials discussed in this manuscript exist at the time of writing.

The morphology of the digital pads of tree frogs is adapted towards attachment, allowing these animals to attach to various substrates and to explore their arboreal habitat. Previous descriptions and functional interpretations of the pad morphology mostly focussed on the surface of the ventral epidermis, and little is known about the internal pad morphology and its functional relevance in attachment. In this study, we combine histology and synchrotron micro-computer-tomography to obtain a comprehensive 3-D morphological characterisation of the digital pads (in particular of the internal structures involved in the transmission of attachment forces from the ventral pad surface towards the phalanges) of the tree frog Hyla cinerea. A collagenous septum runs from the distal tip of the distal phalanx to the ventral cutis and compartmentalises the subcutaneous pad volume into a distal lymph space and a proximal space, which contains mucus glands opening via long ducts to the ventral pad surface. A collagen layer connects the ventral basement membrane via interphalangeal ligaments with the middle phalanx. The collagen fibres forming this layer curve around the transverse pad-axis and form laterally separated ridges below the gland space. The topological optimisation of a shear-loaded pad model using finite element analysis (FEA) shows that the curved collagen fibres are oriented along the trajectories of the maximum principal stresses, and the optimisation also results in ridge-formation, suggesting that the collagen layer is adapted towards a high stiffness during shear loading. We also show that the collagen layer is strong, with an estimated tensile strength of 2.0-6.5 N. Together with longitudinally skewed tonofibrils in the superficial epidermis, these features support our hypothesis that the digital pads of tree frogs are primarily adapted towards the generation and transmission of friction rather than adhesion forces. Moreover, we generate (based on a simplified FEA model and predictions from analytical models) the hypothesis that dorsodistal pulling on the collagen septum facilitates proximal peeling of the pad and that the septum is an adaptation towards detachment rather than attachment. Lastly, by using immunohistochemistry, we (re-)discovered bundles of smooth muscle fibres in the digital pads of tree frogs. We hypothesise that these fibres allow the control of (i) contact stresses at the pad-substrate interface and peeling, (ii) mucus secretion, (iii) shock-absorbing properties of the pad, and (iv) the macroscopic contact geometry of the ventral pad surface. Further work is needed to conclude on the role of the muscular structures in tree frog attachment. Overall, our study contributes to the functional understanding of tree frog attachment, hence offering novel perspectives on the ecology, phylogeny and evolution of anurans, as well as the design of tree-frog-inspired adhesives for technological applications., (© 2018 The Authors. Journal of Anatomy published by John Wiley & Sons Ltd on behalf of Anatomical Society.)

Drilling into solid substrates with slender beam-like structures is a mechanical challenge, but is regularly done by female parasitic wasps. The wasp inserts her ovipositor into solid substrates to deposit eggs in hosts, and even seems capable of steering the ovipositor while drilling. The ovipositor generally consists of three longitudinally connected valves that can slide along each other. Alternative valve movements have been hypothesized to be involved in ovipositor damage avoidance and steering during drilling. However, none of the hypotheses have been tested in vivo. We used 3D and 2D motion analysis to quantify the probing behavior of the fruit-fly parasitoid Diachasmimorpha longicaudata (Braconidae) at the levels of the ovipositor and its individual valves. We show that the wasps can steer and curve their ovipositors in any direction relative to their body axis. In a soft substrate, the ovipositors can be inserted without reciprocal motion of the valves. In a stiff substrate, such motions were always observed. This is in agreement with the damage avoidance hypothesis of insertion, as they presumably limit the overall net pushing force. Steering can be achieved by varying the asymmetry of the distal part of the ovipositor by protracting one valve set with respect to the other. Tip asymmetry is enhanced by curving of ventral elements in the absence of an opposing force, possibly due to pretension. Our findings deepen the knowledge of the functioning and evolution of the ovipositor in hymenopterans and may help to improve man-made steerable probes., Competing Interests: The authors declare no conflict of interest.

Ostrich-like birds (Palaeognathae) show very little taxonomic diversity while their sister taxon (Neognathae) contains roughly 10,000 species. The main anatomical differences between the two taxa are in the crania. Palaeognaths lack an element in the bill called the lateral bar that is present in both ancestral theropods and modern neognaths, and have thin zones in the bones of the bill, and robust bony elements on the ventral surface of their crania. Here we use a combination of modeling and developmental experiments to investigate the processes that might have led to these differences. Engineering-based finite element analyses indicate that removing the lateral bars from a neognath increases mechanical stress in the upper bill and the ventral elements of the skull, regions that are either more robust or more flexible in palaeognaths. Surgically removing the lateral bar from neognath hatchlings led to similar changes. These results indicate that the lateral bar is load-bearing and suggest that this function was transferred to other bony elements when it was lost in palaeognaths. It is possible that the loss of the load-bearing lateral bar might have constrained diversification of skull morphology in palaeognaths and thus limited taxonomic diversity within the group., (© 2017 The Author(s). Evolution © 2017 The Society for the Study of Evolution.)