Search

A 3D wrinkled Ti3C2Tx MXene with ultrafine subunits of Fe2O3 structure provides more active sites for Na-ion storage.

Practical lithium metal batteries (LMBs) require full and reversible utilization of limited metallic Li anodes at a solid/quasi-solid electrolyte condition. This leads to a challenging issue, i.e., how to create compatible interphases to regulate interfacial ionic transport and protect the reactive metal. Herein, to address this issue, we report a robust cellulose-based composite gel electrolyte (r-CCE) capable of stabilizing ion deposition via compositing bacterial cellulose (BC) skeleton with Li6.4La3Zr1.4Ta0.6O12 (LLZTO) particles. Benefiting from the decoupled segment structure of cellulose and additional ionic channels of LLZTO, r-CCE not only achieves high ionic conductivity (1.68×10−3 S/cm) with a remarkable Li-ion transfer number (∼0.92) and a wide window of electrochemical stability (∼5.3 V), but also helps stabilize the Li anode. Utilizing ultrathin lithium metal anodes (15 μm), ultra-stable symmetric Li/Li cells that are armed with r-CCE demonstrate a highly stable plating/stripping process. Furthermore, a high areal capacity of ∼4.2 mAh/cm2, and 100 cycles with improved stability of the full Li metal batteries with n/p ratio of ∼0.74 are achieved.

Upscalable fabrication of efficient and stable perovskite solar modules is urgently needed for commercialization. Here we introduce methylammonium chloride additives in the co-solvent system of N-methyl-2-pyrrolidone/N,N-dimethylformamide to control the formation of intermediate phases during the growth of formamidinium–caesium lead triiodide perovskite films. We achieve high-quality films upon drying without the use of anti-solvent. By implementing bulk and surface passivation, champion efficiencies of 24.02% for a small-sized solar cell and 20.5% for a 5 cm × 5 cm solar mini-module on an aperture area of 22.4 cm2 (geometric fill factor ∼ 96%) are achieved by spin-coating. The fully blade-coated perovskite solar sub-module demonstrates a champion efficiency of 15.3% on an aperture area of 205 cm2. The solar mini-module exhibits impressive operational stability with a T80 lifetime of over 1,000 h at maximum power point tracking under continuous light illumination.

Highly crystalline glass-ceramics were successfully manufactured via a one-step direct cooling method using Shuangqishan (Fujian, China) gold tailings as raw materials.

A couple diagnosed as carriers for lamellar ichthyosis, an autosomal recessive rare disease, encountered two pregnancy losses. Their blood samples showed the same heterozygous c.607C>T mutation in the TGM1 gene. However, we found that about 98.4% of the sperm had mutations, suggesting possible de novo germline mutation. To explore the probability of correcting this mutation, we used two different adenine base editors (ABEs) combined with related truncated single guide RNA (sgRNA) to repair the pathogenic mutation in mutant zygotes. Our results showed that the editing efficiency was 73.8% for ABEmax-NG combined with 20-bp-length sgRNA and 78.7% for Sc-ABEmax combined with 19-bp-length sgRNA. The whole-genome sequencing (WGS) and deep sequencing analysis demonstrated precise DNA editing. This study reveals the possibility of correcting the genetic mutation in embryos with the ABE system.

BackgroundAlthough the microbiome and lifestyle factors are associated with HPV clearance, few studies have systematically explored the relevant factors. This formal follow-up prospective study aims to predict HPV clearance based on vaginal microbiota and lifestyle clinical factors.Participants and MethodsParticipants were recruited through a digital eHealth platform. Participants were unvaccinated for HPV and were assessed at baseline and a follow-up consultation between August 2021 and January 2022. Both clinical factors and cervicovaginal mucus (CVM) samples were collected from each participant. CVM samples were used to detect HPV and characterize vaginal microbiome by metagenomics. Lifestyle clinical factors were grouped into low-, middle-, and high-risk to operate the stratified analysis as well as survival analysis for HPV clearance.ResultsWe recruited 141 HPV-positive women at baseline. For the first follow-up, there were 116 HPV persistent infection and 25 HPV clearance participants. Among 28 clinical factors, six factors were identified as significantly associated: age, age of first sexual intercourse, diet balance, marital status, abortion and physical activity under the stratified analysis. Those with a middle-risk diet balance had an odds ratio (OR) (3.91, 95% CI: 1.02-28.03). Those with extremely high-risk diet balance also had a high OR (11.26, 95% CI: 1.35-122.14), but with a faster and higher proportion of HPV clearance. Conversely, clinical factors with low risk and correspondingly faster HPV clearance were physical activity, sleep quality, depression, and anxiety. Although HPV clearance was unrelated to each microbiome specie, HPV clearance was related to the lower overall diversity of species in the vaginal microbiome and the larger abundance oflactobacillus inners.ConclusionsThis study systematically depicts HPV clearance influenced by clinical factors and its relationship with the vaginal microbial ecosystem. HPV clearance can be improved by modulation of lifestyle habits and marital relationship. The findings from this prospective study have implications for the future design of guidelines to control cervical cancer or other HPV-related cancer, and therefore might be beneficial to women infected with HPV.

Transposable elements (TEs) occupy nearly 40% of mammalian genomes and, whilst most are fragmentary and no longer capable of transposition, they can nevertheless contribute to cell function. TEs within genes transcribed by RNA polymerase II can be copied as parts of primary transcripts; however, their full contribution to mature transcript sequences remains unresolved. Here, using long and short read (LR and SR) RNA sequencing data, we show that 26% of coding and 65% of noncoding transcripts in human pluripotent stem cells (hPSCs) contain TE-derived sequences. Different TE families are incorporated into RNAs in unique patterns, with consequences to transcript structure and function. The presence of TE sequences within a transcript is correlated with TE-type specific changes in its subcellular distribution, alterations in steady-state levels and half-life, and differential association with RNA Binding Proteins (RBPs). We identify hPSC-specific incorporation of endogenous retroviruses (ERVs) and LINE:L1 into protein-coding mRNAs, which generate TE sequence-derived peptides. Finally, single cell RNA-seq reveals that hPSCs express ERV-containing transcripts, whilst differentiating subpopulations lack ERVs and express SINE and LINE-containing transcripts. Overall, our comprehensive analysis demonstrates that the incorporation of TE sequences into the RNAs of hPSCs is more widespread and has a greater impact than previously appreciated.

Tin dioxide (SnO2) has been demonstrated as one of the promising electron transport layers for high-efficiency perovskite solar cells (PSCs). However, scalable fabrication of SnO2 films with uniform coverage, desirable thickness and a low defect density in perovskite solar modules (PSMs) is still challenging. Here, we report preparation of high-quality large-area SnO2 films by chemical bath deposition (CBD) with the addition of KMnO4. The strong oxidizing nature of KMnO4 promotes the conversion from Sn(II) to Sn(VI), leading to reduced trap defects and a higher carrier mobility of SnO2. In addition, K ions diffuse into the perovskite film resulting in larger grain sizes, passivated grain boundaries, and reduced hysteresis of PSCs. Furthermore, Mn ion doping improves both the crystallinity and the phase stability of the perovskite film. Such a multifunctional interface engineering strategy enabled us to achieve a power conversion efficiency (PCE) of 21.70% with less hysteresis for lab-scale PSCs. Using this method, we also fabricated 5 × 5 and 10 × 10 cm2 PSMs, which showed PCEs of 15.62% and 11.80% (active area PCEs are 17.26% and 13.72%), respectively. For the encapsulated 5 × 5 cm2 PSM, we obtained a T80 operation lifetime (the lifespan during which the solar module PCE drops to 80% of its initial value) exceeding 1000 h in ambient condition.

Suppressing nucleation over large areas Although formamidinium-based lead iodide (PbI 2 ) perovskites have a favorable bandgap and good thermal stability, the difficulty in controlling nucleation makes it difficult to grow high-quality, large-area films compared with methylammonium counterparts. Bu et al. show that adding N -methyl-2-pyrrolidone to the perovskite precursors forms an adduct with PbI 2 that promotes the formation of the desired black α-phase at room temperature. The addition of potassium hexafluorophosphate eliminated hysteresis by passivating interfacial defects and promoted long-term thermal stability at 85°C in unencapsulated devices. Large-area modules (17 square centimeters) achieved power conversion efficiencies of 20.4%. Science , abh1035, this issue p. 1327

Two-dimensional Ruddlesden–Popper (RP) and Dion–Jacobson (DJ) phase perovskites are promising alternatives to fabricate blue perovskite light-emitting diodes (PeLEDs) due to their strong quantum/dielectric confinement. While the RP phase perovskites have been widely used as emitter layers in blue PeLEDs, the DJ phase perovskites, possessing better structural stability and charge transfer property, have received little attention. Here, we report the use of DJ phase perovskites for fabricating efficient sky-blue PeLEDs. Organic diamine propane-1,3-diammonium cations were first incorporated into CsPbBr3 to prepare DJ phase perovskites. RbBr was further incorporated as a passivation agent to eliminate traps. It is found that diamine cations and RbBr are interdependent in terms of increasing the utilization of charges. Radiative recombination was enhanced, effectively benefiting from the synergetic confinement and passivation effects. The photoluminescence quantum yield approached 70%. Finally, the fabricated PeLEDs achieved an external quantum efficiency of 8.5% with an emission peak at 490 nm.

The incorporation of a certain amount of Cl ions into methylammonium lead iodide (MAPbI3) perovskite films and how these incorporated Cl ions affect the structural and electronic properties of these films have been an intensively studied topic. In this study, we comprehensively investigated Cl incorporation in MAPbI3 at the atomic scale by a combined study of scanning tunneling microscopy, X-ray photoelectron spectroscopy, ultraviolet and inverse photoemission spectroscopy, density functional theory and molecular dynamics calculations. At a Cl concentration of 14.8 ± 0.6%, scanning tunneling microscopy images confirm the incorporation of Cl ions on the MAPbI3 surface, which also corresponds to the highest surface stability of MAPbI3 found from the viewpoint of both thermodynamics and kinetics by density functional theory and molecular dynamics calculations. Our results show that the Cl concentration is crucial to the surface bandgap and stability of MAPbI3.

Herein, TiSe2-C laminated heterojunction in-situ derived from halogen ion（-Cl, -F）terminal functionalized Ti3C2Tx MXene was prepared by the solid-state reaction. Functional Precursor of Cl-enriched MXene was synthesized by chloride molten etching method, high-crystalline TiSe2-C laminated heterojunction was obtained after the selenylation process. For F-enriched MXene, abundant TiO2 nanoparticles could be acquired besides TiSe2-C lamination. Based on DFT calculation results, byproduct TiO2 and amorphous carbon can continuously inject electrons to TiSe2, owing to the discrepancy of work functions. Excellent charge-carrier transportation peculiarity gives TiSe2-C lamination heterojunction excellent electrochemical performances and can also accelerate the kinetic process. Among them, TiSe¬2-Cl can demonstrate a reversible capacity of 369.14 mAh g-1 at the current of 1 A g-1, and even keep a high rate capacity 372.26 mAh g-1 at 5 A g-1. This study provides a new idea to synthesize MXene derivatives for high performance sodium ion batteries anode materials.

Background: The molecular mechanism in the progression of ovarian clear cell carcinoma (OCCC) remains unclear. Objective: This study aimed to investigate the potential function of RAYLY in OCCC. Methods: To validate RAYLY expression, immunohistochemistry, quantitative real-time PCR and western blotting were performed in OCCC tissues and the cell lines of OCCC and epithelial ovarian carcinoma (EOC). Subsequently, the biological effects of RALYL were evaluated through colony formation, and cell proliferation, migration and invasion assays. Finally, RNA-sequencing and gene set enrichment analysis (GSEA) were conducted to explore potential mechanism of RALYL in OCCC. Results: In our study, RALYL was significantly down-regulated in a majority of OCCC tissues compared to adjacent non-tumorous tissues, and OCCC cells had a lower expression level of RALYL than that of EOC cells. OCCC patients with high RALYL expression had a better pathological stage and prognosis. In vitro, over-expression of RALYL inhibited cell proliferation, migration and invasion in OCCC. GSEA analysis and western blot indicated an enrichment of MAPK and CDH1 signaling pathways in OCCC cells without RALYL over-expression. Conclusions: RALYL played an important role in the progression of OCCC, and might serve as a potential prognostic biomarker and novel therapeutic target for OCCC.

The upscaling of perovskite solar cells to module scale and long-term stability have been recognized as the most important challenges for the commercialization of this emerging photovoltaic technology. In a perovskite solar module, each interface within the device contributes to the efficiency and stability of the module. Here, we employed a holistic interface stabilization strategy by modifying all the relevant layers and interfaces, namely the perovskite layer, charge transporting layers and device encapsulation, to improve the efficiency and stability of perovskite solar modules. The treatments were selected for their compatibility with low-temperature scalable processing and the module scribing steps. Our unencapsulated perovskite solar modules achieved a reverse-scan efficiency of 16.6% for a designated area of 22.4 cm2. The encapsulated perovskite solar modules, which show efficiencies similar to the unencapsulated one, retained approximately 86% of the initial performance after continuous operation for 2,000 h under AM1.5G light illumination, which translates into a T90 lifetime (the time over which the device efficiency reduces to 90% of its initial value) of 1,570 h and an estimated T80 lifetime (the time over which the device efficiency reduces to 80% of its initial value) of 2,680 h. The upscaling of layer treatments and processing that afford high efficiency and stability in small-area perovskite solar cells remains challenging. Liu et al. show how the efficiency and stability of perovskite modules can be improved using an integrated approach to interface and layer engineering.

Control of forward and inverse reactions between perovskites and precursor materials is key to attaining high-quality perovskite materials. Many techniques focus on synthesizing nanostructured CsPbX3 materials (e.g., nanowires) via a forward reaction (CsX + PbX2 → CsPbX3). However, low solubility of inorganic perovskites and complex phase transition make it difficult to realize the precise control of composition and length of nanowires using the conventional forward approach. Herein, we report the self-assembly inverse growth of CsPbBr3 micronanowires (MWs) (CsPb2Br5 → CsPbBr3 + PbBr2↑) by controlling phase transition from CsPb2Br5 to CsPbBr3. The two-dimensional (2D) structure of CsPb2Br5 serves as nucleation sites to induce initial CsPbBr3 MW growth. Also, phase transition allows crystal rearrangement and slows down crystal growth, which facilitates the MW growth of CsPbBr3 crystals along the 2D planes of CsPb2Br5. A CsPbBr3 MW photodetector constructed based on the inverse growth shows a high responsivity of 6.44 A W–1 and detectivity of ∼1012 Jones. Large grain size, high crystallinity, and large thickness can effectively alleviate decomposition/degradation of perovskites, which leads to storage stability for over 60 days in humid environment (relative humidity = 45%) and operational stability for over 3000 min under illumination (wavelength = 400 nm, light intensity = 20.06 mW cm–2).

Lead-free double perovskite materials have attracted much interest for optoelectronic applications due to their nontoxicity and high stability. In this work, centimetre-sized Cs2AgBiBr6 single crystals were successfully grown using methylammonium bromide (MABr) as the flux by a top-seeded solution growth (TSSG) method. The low-temperature crystal structure of Cs2AgBiBr6 single crystals was determined and refined. To investigate the interface problems between Cs2AgBiBr6 single crystals and electrodes, the optical band gap, X-ray photoelectron spectroscopy (XPS), and ultraviolet photoemission spectroscopy (UPS) measurements were performed on Cs2AgBiBr6 single crystals. More importantly, we investigated the photodetectors based on Cs2AgBiBr6 single crystals with different contact electrodes (Au, Ag, and Al). It is found that a good Ohmic contact with Ag electrodes enables excellent photo-response behaviors. Furthermore, we studied the photodetectors based on Cs2AgBiBr6 single crystals using Ag electrodes under room and low temperature conditions, which underwent phase transition. Cs2AgBiBr6 single crystal photodetectors show clear differences at room and low temperatures, which is caused by the work function changes of Cs2AgBiBr6 single crystals induced by the reversible phase transition. These attractive properties may enable opportunities to apply emerging double perovskite single-crystalline materials for high-performance optoelectronic devices.

Hybrid chemical vapor deposition (HCVD) has been employed in the fabrication of perovskite solar cells (PSCs) and modules (PSMs), and it shows strong promise for upscalable fabrication. The conventional HCVD process needs a relatively long processing time (e.g., several hours) and the fabricated PSCs often exhibit salient hysteresis, which impedes utilization of this technology for mass production. Herein, we demonstrate a rapid HCVD (RHCVD) fabrication process for PSCs using a rapid thermal process, which not only significantly reduces the deposition time to less than 10 min, but also effectively suppresses hysteresis. This markedly reduced deposition time is comparable to that of solution-coating processes. Furthermore, the shorter processing time inside the furnace reduces the exposure time of the glass/ITO/SnO2 substrates under vacuum, which helps maintain the high quality of the SnO2 electron-transport layer and results in a lower density of gap states. Finally, PSMs with a designated area of 22.4 cm2 fabricated via RHCVD achieved an efficiency of 12.3%, and maintained 90% of the initial value after operation under continuous light illumination for over 800 h.

Lead-free tin perovskite solar cells (PSCs) have undergone rapid development in recent years and are regarded as a promising eco-friendly photovoltaic technology. However, a strategy to suppress charge recombination via a built-in electric field inside a tin perovskite crystal is still lacking. In the present study, a formamidinium tin iodide (FASnI

Around 60% of in vitro fertilized (IVF) human embryos irreversibly arrest before compaction between the 3-8-cell stage, posing a significant clinical problem. The mechanisms behind this arrest are unclear. Here, we show that the arrested embryos enter a quiescent-like state, marked by cell cycle arrest, the downregulation of ribosomes and histones and downregulation of MYC and p53 activity. Mechanistically, the arrested embryos can be divided into three types. Type I embryos fail to complete the maternal-zygotic transition, and type II/III embryos have erroneously low levels of glycolysis and variable levels of oxidative phosphorylation. Treatment with resveratrol or nicotinamide riboside (NR) can partially rescue the arrested phenotype. The mechanism of reactivation involves the upregulation of SIRT1, and activation of glycolysis and fatty acid oxidation which forces the embryos out of a quiescent state. Overall, our data reveal how human embryo arrest can be overcome by modulating metabolic pathways.