Search

Solar‐driven upgrading of biomass‐derived 5‐hydroxylmethylfurfural (HMF) to 2,5‐furandicarboxylic acid (FDCA) holds great promise for sustainable production of bio‐plastics and resins. However, the process is limited by poor selectivity and sluggish kinetics due to the vertical coordination of HMF at relatively strong metal sites. Here, we purposely developed a Cu(II) porphyrin framework featuring side‐chain incorporated urea linkages, denoted as TBUPP−Cu MOF, to render HMF a weak hydrogen bond at the urea site and flat adsorption via π–π stacking with the benzene moiety. The unique configuration promotes the approaching of −CHO of HMF to the photoexcited porphyrin ring towards kinetically and thermodynamically favourable intermediate formation and subsequent desorption. The charge localisation and orbital energy alignment enable the selective activation of O2 over the porphyrin to generate ⋅O2− and 1O2 instead of highly oxidative H2O2 and ⋅OH via spin‐flip electron transfer, which drive the ambient oxidation of proximal −CHO. The effective utilisation of redox species and circumvented over‐oxidation facilitate a FDCA selectivity of >90 % with a high turnover number of 193 molHMF molCu−1. The facile purification of high‐purity FDCA and zero‐waste recycling of intermediates and durable catalyst feature TBUPP−Cu MOF a promising photo‐oxidation platform towards net‐zero biorefining and organic transformations. [ABSTRACT FROM AUTHOR]

Artificial photosynthesis is a promising approach to produce clean fuels via renewable solar energy. However, it is practically constrained by two issues of slow photogenerated carrier migration and rapid electron/hole recombination. It is also a challenge to achieve a 2:1 ratio of H2 and O2 for overall water splitting. Here we report a rational design of spatially differentiated two-dimensional Bi4Ti3O12 nanosheets to enhance overall water splitting. Such a spatially differentiated structure overcomes the limitation of charge transfer across different crystal planes in a single crystal semiconductor. The experimental results show a redistribution of charge within a crystal plane. The resulting photocatalyst produces 40.3 μmol h–1 of hydrogen and 20.1 μmol h–1 of oxygen at a near stoichiometric ratio of 2:1 and a solar-to-hydrogen efficiency of 0.1% under simulated solar light. Via specific acid etching, the authors report the production of spatially differentiated Bi4Ti3O12 nanosheets to accelerate photogenerated charge transfer and separation for effective water splitting in a one-step excitation system with a solar-to-hydrogen efficiency of 0.1%. [ABSTRACT FROM AUTHOR]

Adipic acid (AA) is a crucial feedstock for nylon polymers, and is industrially produced by thermal oxidation of cyclohexanone/cyclohexanol mixture (KA oil). However, this process consumes large quantities of corrosive nitric acid as oxidants, while emits ozone‐depleting greenhouse gas N2O. Here, an electrocatalytic strategy for selective oxidation of KA oil to AA coupled with H2 evolution over a Co3O4/graphdiyne cooperative catalyst (Co3O4/GDY) is reported. The Co3O4/GDY displays high electrooxidation activity of KA oil to AA (100 mA cm−2 at ≈1.5 V vs RHE), outperforming all the reported findings. Detailed ex situ and in situ experimental studies, theoretical calculations, and molecular dynamic simulations reveal that GDY not only facilitates the enrichment of cyclohexanone on the catalyst surface in aqueous medium, but also upshifts the d‐band center of Co sites, strengthening the adsorption/activation of cyclohexanone. This study offers a green route for AA synthesis and proposes a GDY interface engineering strategy for efficient electrooxidation. [ABSTRACT FROM AUTHOR]

Hierarchically porous silicon nanoflakes were synthesized from natural talc via a mechanochemical reduction method, which showed great potential in the scalable production of silicon nanoflakes due to the abundant precursor and facile strategy. The unique layered structure and chemical composition of talc enabled the formation of two-dimensional nanostructured silicon without any additional templates. As lithium-ion battery anodes, the silicon nanoflakes showed excellent electrochemical properties. [ABSTRACT FROM AUTHOR]

Direct solar-driven methane (CH4) reforming is highly desirable but challenging, particularly to achieve a value-added product with high selectivity. Here, we identify a synergistic ensemble effect of atomically dispersed copper (Cu) species and partially reduced tungsten (Wδ+), stabilised over an oxygen-vacancy-rich WO3, which enables exceptional photocatalytic CH4 conversion to formaldehyde (HCHO) under visible light, leading to nearly 100% selectivity, a very high yield of 4979.0 μmol·g−1 within 2 h, and the normalised mass activity of 8.5 × 106 μmol·g-1Cu·h−1 of HCHO at ambient temperature. In-situ EPR and XPS analyses indicate that the Cu species serve as the electron acceptor, promoting the photo-induced electron transfer from the conduction band to O2, generating reactive •OOH radicals. In parallel, the adjacent Wδ+ species act as the hole acceptor and the preferred adsorption and activation site of H2O to produce hydroxyl radicals (•OH), and thus activate CH4 to methyl radicals (•CH3). The synergy of the adjacent dual active sites boosts the overall efficiency and selectivity of the conversion process. Direct solar-driven methane (CH4) reforming is highly desirable but challenging. Here, the synergy of atomic Cu species and partially reduced tungsten (Wδ+), stabilized over an oxygen-vacancy-rich WO3, enables exceptional CH4 conversion to formaldehyde (HCHO) under visible light. [ABSTRACT FROM AUTHOR]

Electro‐reforming of Polyethylene‐terephthalate‐derived (PET‐derived) ethylene glycol (EG) into fine chemicals and H2 is an ideal solution to address severe plastic pollution. Here, we report the electrooxidation of EG to glycolic acid (GA) with a high Faraday efficiency and selectivity (>85 %) even at an industry‐level current density (600 mA cm−2 at 1.15 V vs. RHE) over a Pd−Ni(OH)2 catalyst. Notably, stable electrolysis over 200 h can be achieved, outperforming all available Pd‐based catalysts. Combined experimental and theoretical results reveal that 1) the OH* generation promoted by Ni(OH)2 plays a critical role in facilitating EG‐to‐GA oxidation and removing poisonous carbonyl species, thereby achieving high activity and stability; 2) Pd with a downshifted d‐band center and the oxophilic Ni can synergistically facilitate the rapid desorption and transfer of GA from the active Pd sites to the inactive Ni sites, avoiding over‐oxidation and thus achieving high selectivity. [ABSTRACT FROM AUTHOR]