Search

As a typical hard but brittle material, Si tends to fracture abruptly at a stress well below its theoretical strength, even if the tested volume goes down to submicron scale, at which materials are usually nearly free of flaws or extended defects. Here, via the thermal–oxidation–mediated healing of the surface that is the preferred site for cracks or dislocations initiation, the premature fracture can be effectively inhibited and the over 50% homogeneous plastic strain with the near‐theoretical strength (twice the value of the unhealed counterpart) are united in submicron‐sized Si particles. In situ transmission electron microscope observations and atomistic simulations elucidate the confinement effect from the passivated and smoothened thermal oxide, which retards the dislocation nucleation and transforms the dominant deformation mechanism from partial dislocation to the more mobile full dislocation. This work demonstrates an effective and feasible surface engineering pathway to optimize the mechanical properties of Si at small scales. [ABSTRACT FROM AUTHOR]

All‐solid‐state battery (ASSB) is a potential future energy storage technology to power the future world. However, the solid–solid contacts among the various components in ASSB often require a high stack pressure which is unrealistic in practical applications. Here it is shown that by carbon‐coating Sb2Se3 (Sb2Se3@C) nanorods, a record low stack pressure is attained, and the Sb2Se3@C electrode exhibits outstanding performance of 862 mAh g−1 over 50 cycles at 0.1 A g−1 when it is operated at 5 MPa stack pressure in an ASSB using LiIn anode and Li10Si0.3PS6.7Cl1.8 solid‐state electrolytes. Furthermore, a record high active material loading (the mass fraction of Sb2Se3@C being 0.7 in composite cathode) is achieved, and the Sb2Se3@C based ASSB delivers a reversible capacity of 2.6 mAh cm−2 at 0.1 A g−1 after 100 cycles. This work provides a strategy to significantly increase the cathode active material loading and dramatically reduce the stack pressure of ASSBs, which brings it one step closer toward the practical implementation of ASSBs for energy storage applications. [ABSTRACT FROM AUTHOR]

Layered transition metal dichalcogenides have great potential as anodes of sodium‐ion batteries (SIBs) due to their high theoretical specific capacity. However, the restacking severely limits their accessible sites, leading to undesirable specific capacity, cycle stability, and working temperature range. Herein, a hierarchical 2D VS2/Ti3C2Tx MXene hybrid is designed via a simple liquid‐mixing method, where VS2 is confined in the conductive Ti3C2Tx matrix with chemical connections built between them. The in situ transmission electron microscopy analyses reveal that the hybrid depends on a very fast and reversible intercalation/de‐intercalation process between VS2 and NaxVS2 (where x = 1) to store sodium. Theoretical calculations disclose that the Ti3C2Tx matrix remarkably enhances the charge transfer and alleviates the volume expansion of VS2 especially after Na+ is inserted. Consequently, such a rational design exhibits an intercalation pseudocapacitance‐dominant mechanism, with excellent specific capacity (522 mAh g−1 at 0.2 A g−1), rate capability (342 mAh g−1 at 10 A g−1), cycle life (116% after 3000 cycles), and also all‐climate workability (with high specific capacity and long‐term cycle stability even at 70 and −40 °C). This study may open up a new vision to design fast‐charging, long‐cycle, and all‐climate SIBs anodes based on the intercalation pseudocapacitance. [ABSTRACT FROM AUTHOR]

Summary: To expand the cultivation area of apple (Malus×domestica Borkh.) and select resistant varieties by genetic engineering, it is necessary to clarify the mechanism of salt and osmotic stress tolerance in apple. The MdMYB46 transcription factor was identified, and the stress treatment test of MdMYB46‐overexpressing and MdMYB46‐RNAi apple lines indicated that MdMYB46 could enhance the salt and osmotic stress tolerance in apple. In transgenic Arabidopsis and apple, MdMYB46 promoted the biosynthesis of secondary cell wall and deposition of lignin by directly binding to the promoter of lignin biosynthesis‐related genes. To explore whether MdMYB46 could coordinate stress signal transduction pathways to cooperate with the formation of secondary walls to enhance the stress tolerance of plants, MdABRE1A, MdDREB2A and dehydration‐responsive genes MdRD22 and MdRD29A were screened out for their positive correlation with osmotic stress, salt stress and the transcriptional level of MdMYB46. The further verification test demonstrated that MdMYB46 could activate their transcription by directly binding to the promoters of these genes. The above results indicate that MdMYB46 could enhance the salt and osmotic stress tolerance in apple not only by activating secondary cell wall biosynthesis pathways, but also by directly activating stress‐responsive signals. [ABSTRACT FROM AUTHOR]

Metals fluorides (MFs) are potential conversion cathodes to replace commercial intercalation cathodes. However, the application of MFs is impeded by their poor electronic/ionic conductivity and severe decomposition of electrolyte. Here, a composite cathode of FeF2 and polymer‐derived carbon (FeF2@PDC) with excellent cycling performance is reported. The composite cathode is composed of nanorod‐shaped FeF2 embedded in PDC matrix with excellent mechanical strength and electronic/ionic conductivity. The FeF2@PDC enables a reversible capacity of 500 mAh g–1 with a record long cycle lifetime of 1900 cycles. Remarkably, the FeF2@PDC can be cycled at a record rate of 60 C with a reversible capacity of 107 mAh g–1 after 500 cycles. Advanced electron microscopy reveals that the in situ formation of stable Fe3O4 layers on the surface of FeF2 prevents the electrolyte decomposition and leaching of iron (Fe), thus enhancing the cyclability. The results provide a new understanding to FeF2 electrochemistry, and a strategy to radically improve the electrochemical performance of FeF2 cathode for lithium‐ion battery applications. [ABSTRACT FROM AUTHOR]