Search

Fluoride treatment of ZSM-5 zeolite can effectively adjust surface acidity and generate a secondary pore structure. In this study, a series of modified nano-HZSM-5 zeolites were prepared by NH4F-HF mixed solution treatment and applied to the selective conversion of bioethanol to propylene at 500 °C, atmospheric pressure, and a WHSV of 10 h−1. The results showed that NH4F-HF modification weakened the surface acidity of nano-HZSM-5 zeolites, thus inhibiting coke formation. Additionally, the mesopores in the nano-HZSM-5 zeolites increased after NH4F-HF treatment, thereby enhancing the mass transfer rate and improving the coke-resistance ability. The NH4F-HF mixed solution modification significantly improved the stability of nano-HZSM-5 zeolites in catalyzing bioethanol to propylene and greatly extended the working life of nano-HZSM-5 zeolites. It can be seen from the characterization of the deactivated catalysts that coke deposition and weakening of acidity may be the key factors for catalyst deactivation. [ABSTRACT FROM AUTHOR]

A series of ZnO/ZrO2 catalysts were synthesized by the precipitation method. The effect of different precipitation modes on the physicochemical properties of the ZnO/ZrO2 catalysts for CO2 hydrogenation to methanol was investigated. The catalysts were characterized by X-ray diffraction (XRD), N2 adsorption–desorption, transmission electron microscopy (TEM), temperature programmed desorption of CO2 (CO2-TPD), temperature programmed reduction of H2 (H2-TPR), and X-ray photoelectron spectroscopy (XPS). The results showed that the catalyst of ZnO/ZrO2 prepared by the concurrent precipitation method had more CO2 adsorption sites, resulting in its higher CO2 conversion. While the stepwise precipitation mode increased the surface oxygen content of ZnO/ZrO2, which enhanced the methanol selectivity. Overall, the ZnO/ZrO2 prepared by the concurrent precipitation mode exhibited a highly competitive efficacy for CO2 hydrogenation, giving a methanol selectivity of 81.4% with a CO2 conversion of 5.1% at 280 ℃ and 3 MPa, and the methanol yield reached 4.2%. The effect of different precipitation modes on the physicochemical properties of the ZnO/ZrO2 catalysts for CO2 hydrogenation to methanol was investigated, and the ZnO/ZrO2 prepared by the concurrent precipitation mode exhibited a highly competitive efficacy for CO2 hydrogenation. [ABSTRACT FROM AUTHOR]

Maintaining high conversion under the premise of high oxygenates selectivity in syngas conversion is important but a formidable challenge in Rh catalysis. Monometallic Rh catalysts provide poor oxygenate conversion efficiency, and efforts have been focused on constructing adjacent polymetallic sites; however, the one‐pass yields of C2+ oxygenates over the reported Rh‐based catalysts were mostly <20 %. In this study, we constructed a monometallic Rh catalyst encapsulated in UiO‐67 (Rh/UiO‐67) with enhanced proximity to dual‐site Rh1,2‐Rhn ensembles. Unexpectedly, this catalyst exhibited high efficacy for oxygenate synthesis from syngas, giving a high oxygenate selectivity of 72.0 % with a remarkable CO conversion of 50.4 %, and the one‐pass yield of C2+ oxygenates exceeded 25 %. The state‐of‐the‐art characterizations further revealed the spontaneous formation of an ensemble of Rh single atoms/dimers (Rh1,2) in the proximity of ultrasmall Rh clusters (Rhn) confined within the nanocavity of UiO‐67, providing adjacent Rh+‐Rh0 dual sites dynamically during the reaction that promote the relay of the undissociated CHO species to the CHx species. Thus, our results open a new route for designing highly efficient Rh catalysts for the conversion of syngas to oxygenates by precisely tuning the ensemble and proximity of the dual active sites in a confined space. [ABSTRACT FROM AUTHOR]

Photothermal coupling catalysis technology has been widely studied in recent years and may be a promising method for CO2 reduction. Photothermal coupling catalysis can improve chemical reaction rates and realize the controllability of reaction pathways and products, even in a relatively moderate reaction condition. It has inestimable value in the current energy and global environmental crisis. This review describes the application of photothermal catalysis in CO2 reduction from different aspects. Firstly, the definition and advantages of photothermal catalysis are briefly described. Then, different photothermal catalytic reductions of CO2 products and catalysts are introduced. Finally, several strategies to improve the activity of photothermal catalytic reduction of CO2 are described and we present our views on the future development and challenges of photothermal coupling. Ultimately, the purpose of this review is to bring more researchers' attention to this promising technology and promote this technology in solar fuels and chemicals production, to realize the value of the technology and provide a better path for its development. [ABSTRACT FROM AUTHOR]

UiO-66 and its modified forms (UiO-66-NH2 and UiO-66-OH) were used as supports to prepare Rh–Mn catalysts by using a co-impregnation method, and their catalytic activities were investigated for the direct synthesis of ethanol-based C2+ oxygenates from CO hydrogenation. The catalysts were comprehensively characterized using N2 sorption, XRD, XPS, DRIFT, and TPSR analyses. The structural and textural properties of the catalysts clearly show that Rh and Mn are highly dispersed in the pores of MOFs, but the order of the original structure is partially sacrificed due to the loading of metals and the synergistic effect of Rh, Mn, and Zr would be influenced by various functional groups present in UiO-66. On combining both in situ FT-IR and TPSR analyses, it is confirmed that the higher number of active sites of Rh0 on RM/UiO-66 promotes the CO dissociation ability and hydrogenation rate, which result in its best catalytic activity with the highest yield of C2+ oxygenates, 197.3 g (kg h)−1. [ABSTRACT FROM AUTHOR]