Search

In this study, a dysprosium-based metal–organic framework (MOF) sensor (Dy-MOF) was developed for the ratiometric detection of I− in aqueous medium. Upon excitation at 230 nm, Dy-MOF shows two dominant emission bands at 464 nm and 574 nm assigned to (4F, 4D)5/2 → 6H9/2 + 6F11/2 and 4F9/2 → 6H13/2 transition of Dy3+, respectively, which have different sensitivities toward iodide ions. The introduction of I− slightly weakened the blue emission at 464 nm and significantly quenched the yellow emission at 574 nm. Thus, ratiometric sensing for iodide was realized using the yellow-to-blue intensity ratio of Dy3+. Dy-MOF exhibits superior sensing behavior towards I− with high selectivity, sensitivity and low detection limit (24 nM). This study also provides a strategy for the construction of a ratiometric sensor with dual-emission bands originating from only one emission center. [ABSTRACT FROM AUTHOR]

Detection of Fe(III) and Cu(II) in water is highly desirable because their abnormal levels can cause serious harm to human health and environmental safety. In this work, a ratiometric luminescence sensing platform based on lanthanide-based silica nanoparticles was constructed for the detection of Fe3+ and Cu2+ ions. The terbium-silica nanoparticles (named SiO2@Tb) with dual-emission signals were successfully prepared by grafting Tb3+ ions onto trimellitic anhydride (TMA) functionalized silica nanospheres. It can serve as a ratiometric fluorescent probe for the detection of Fe3+ and Cu2+ ions in water with the green emission of Tb3+ ions as a response signal and the blue emission of silica nanospheres as the reference signal. Significantly, an easy-to-differentiate color change for visual detection was also realized. SiO2@Tb shows high sensitivity even in very low concentration regions towards the sensing of Fe3+ and Cu2+ with low detection limits of 0.75 μM and 0.91 μM, respectively. Moreover, the mechanism for the luminescence quenching of SiO2@Tb was systematically investigated, and was attributed to the synergetic effect of the absorption competition quenching (ACQ) mechanism and cation exchange. This study demonstrates that SiO2@Tb can be employed as a promising fluorescent probe for the detection of Fe3+ and Cu2+ ions, and the combination of lanthanide ions with silica nanoparticles is an effective strategy to construct a ratiometric fluorescent sensing platform for the determination of analytes in environmental detection. [ABSTRACT FROM AUTHOR]

A luminescence sensor based on an europium(III)-based lanthanide–organic framework, [Eu(BCB)(DMF)]·(DMF)1.5(H2O)2 (1), was synthesized via a solvothermal method using 4,4′,4′′-benzenetricarbonyltribenzoic acid (H3BCB) as a bridging ligand. Single-crystal X-ray diffraction indicates that Eu centers are eight-coordinated with a trigonal dodecahedron and a square antiprismatic configuration, and adjacent Eu atoms are bridged by BCB organic linkers to form a 3D rod-packing structure. Photoluminescence studies show that compound 1 emits bright red luminescence and behaves as a multi-responsive luminescent sensor toward 4-nitrophenol (4-NP) and I− and Fe3+ ions in water with high sensitivity, selectivity and low detection limits. Furthermore, the possible luminescence sensing mechanisms were also investigated by PXRD analysis, UV-vis spectroscopy and X-ray photoelectron spectroscopy (XPS). The recognition mechanism for 4-NP and I− ions can be attributed to the competition absorption and that for Fe3+ ions is considered to be a multi-quenching mechanism dominated by competition absorption. This study demonstrates that the lanthanide-based MOF might be a promising candidate for the detection of 4-NP and I− and Fe3+ ions in aqueous medium. [ABSTRACT FROM AUTHOR]

Three new flavonoids, pinocembrin-7-O-[3″-O-galloyl]-β-D-glucose (1), pinocembrin-7-O-[2″-O-galloyl-4″,6″-hexahydroxydiphenoyl]-β-D-glucose (2), 2′,6′-dihydroxydihydrochalcone-4′-O-[2″-O-galloyl-4″,6″-hexahydroxydiphenoyl]-β-D-glucopyranoside (3), and 12 known compounds (4–15) were isolated from Penthorum Chinense Pursh. The structures of all compounds were established mainly by NMR and MS experiments as well as the necessary chemical evidence. The anti-hyperlipidemic activities of the three new flavonoids were predicted by molecular docking. [ABSTRACT FROM AUTHOR]

Phosphodiesterase 10A (PDE10A) has been confirmed to be an important target for the treatment of central nervous system (CNS) disorders. The purpose of the present study was to identify PDE10A inhibitors from herbs used in traditional Chinese medicine. Pharmacophore and molecular docking techniques were used to virtually screen the chemical molecule database of Sophora flavescens, a well-known Chinese herb that has been used for improving mental health and regulating the CNS. The pharmacophore model generated recognized the common functional groups of known PDE10A inhibitors. In addition, molecular docking was used to calculate the binding affinity of ligand-PDE10A interactions and to investigate the possible binding pattern. Virtual screening based on the pharmacophore model and molecular docking was performed to identify potential PDE10A inhibitors from S. flavescens. The results demonstrated that nine hits from S. flavescens were potential PDE10A inhibitors, and their biological activity was further validated using literature mining. A total of two compounds were reported to inhibit cyclic adenosine monophosphate phosphodiesterase, and one protected against glutamate-induced oxidative stress in the CNS. The remaining six compounds require further bioactivity validation. The results of the present study demonstrated that this method was a time- and cost-saving strategy for the identification of bioactive compounds from traditional Chinese medicine. [ABSTRACT FROM AUTHOR]

A simple dispersive liquid–liquid microextraction (DLLME) method, based on retrieval of the extraction solvent by magnetic particles and followed by HPLC–UV analysis, was proposed for the determination of UV filters in environmental water samples. The new method uses vortex agitation in the DLLME process to achieve rapid equilibrium. Another feature of the proposed method is that the retrieval of the extraction solvent is accomplished by functionalized magnetic particles rather than by special designed vessels or refrigeration and thawing process associated with DLLME when low-density extraction solvent was used. The parameters that may influence the extraction, including vortex time, volume of extraction solvent, weight of the magnetic particles, volume of desorption solvent, pH, and ionic concentration of the sample solution, were investigated in detail. Under the optimized conditions, the limits of detection for the target UV filters were in range of 0.7–12.3 ng mL−1. The results also demonstrated good linearity and precision, with the regression coefficients above 0.9989 and the RSDs below 4.4%, respectively. [ABSTRACT FROM PUBLISHER]

A novel supramolecular framework, catena-poly[[[aqua(2-phenylquinoline-4-carboxylato-κ O)silver(I)]-μ-4,4′-bipyridine-κ2 N: N′] dihydrate], {[Ag(C16H10NO2)(C10H8N2)(H2O)]·2H2O} n, has been synthesized and structurally characterized. The AgI centres are four-coordinated and bridged by 4,4′-bipyridine (4,4′-bipy) ligands to form a one-dimensional Ag-bipy chain. The Ag-bipy chains are further linked together by intermolecular O-H...O and O-H...N hydrogen-bonding interactions between adjacent chains, resulting in a three-dimensional framework. [ABSTRACT FROM AUTHOR]

Detection of Fe(III) and Cu(II) in water is highly desirable because their abnormal levels can cause serious harm to human health and environmental safety. In this work, a ratiometric luminescence sensing platform based on lanthanide-based silica nanoparticles was constructed for the detection of Fe 3+ and Cu 2+ ions. The terbium-silica nanoparticles (named SiO 2 @Tb) with dual-emission signals were successfully prepared by grafting Tb 3+ ions onto trimellitic anhydride (TMA) functionalized silica nanospheres. It can serve as a ratiometric fluorescent probe for the detection of Fe 3+ and Cu 2+ ions in water with the green emission of Tb 3+ ions as a response signal and the blue emission of silica nanospheres as the reference signal. Significantly, an easy-to-differentiate color change for visual detection was also realized. SiO 2 @Tb shows high sensitivity even in very low concentration regions towards the sensing of Fe 3+ and Cu 2+ with low detection limits of 0.75 μM and 0.91 μM, respectively. Moreover, the mechanism for the luminescence quenching of SiO 2 @Tb was systematically investigated, and was attributed to the synergetic effect of the absorption competition quenching (ACQ) mechanism and cation exchange. This study demonstrates that SiO 2 @Tb can be employed as a promising fluorescent probe for the detection of Fe 3+ and Cu 2+ ions, and the combination of lanthanide ions with silica nanoparticles is an effective strategy to construct a ratiometric fluorescent sensing platform for the determination of analytes in environmental detection.

A luminescence sensor based on an europium(III)-based lanthanide-organic framework, [Eu(BCB)(DMF)]·(DMF) 1.5 (H 2 O) 2 (1), was synthesized via a solvothermal method using 4,4',4''-benzenetricarbonyltribenzoic acid (H 3 BCB) as a bridging ligand. Single-crystal X-ray diffraction indicates that Eu centers are eight-coordinated with a trigonal dodecahedron and a square antiprismatic configuration, and adjacent Eu atoms are bridged by BCB organic linkers to form a 3D rod-packing structure. Photoluminescence studies show that compound 1 emits bright red luminescence and behaves as a multi-responsive luminescent sensor toward 4-nitrophenol (4-NP) and I - and Fe 3+ ions in water with high sensitivity, selectivity and low detection limits. Furthermore, the possible luminescence sensing mechanisms were also investigated by PXRD analysis, UV-vis spectroscopy and X-ray photoelectron spectroscopy (XPS). The recognition mechanism for 4-NP and I - ions can be attributed to the competition absorption and that for Fe 3+ ions is considered to be a multi-quenching mechanism dominated by competition absorption. This study demonstrates that the lanthanide-based MOF might be a promising candidate for the detection of 4-NP and I - and Fe 3+ ions in aqueous medium.

Objective: To investigate the clinical effects of manipulative reduction and percutaneous locking compression plate internal fixation for the treatment of mid-distal tibiofibula shaft fractures., Methods: From January 2006 to October 2009,46 patients suffering from mid-distal tibiofibula shaft fractures were treated with closed manipulative reduction and LCP, involved 27 males and 19 females with an average age of 39 years old ranging from 17 to 56 years. According to AO classification, there were 12 cases of type A, 24 of type B, 10 of type C. The duration of visiting hospital were from 2 hours to 3 days after being injured for these patients. The injured limbs of the patients were swollen and painful,even with bony crepitus. The wound, function of the injured limb and union of fractures were observed after operation., Results: All the patients were followed up from 12 to 18 months (averaged 15 months). It was found that the wound of all patients had primary healing without any infection. The fracture healing time was 12 to 18 weeks (means 14 weeks). The results were excellent in 40 cases,good in 4 and fair in 2., Conclusion: Less invasive, more stable fixation, shorter healing time and better functional rehabilitation are observed in the treatment of mid-distal tibiofibula shaft fractures after manipulative reduction and percutaneous locking compression plate internal fixation.

Four cyano-bridged 1D bimetallic polymers have been prepared by using the paramagnetic building block trans-[Ru(acac)(2)(CN)(2)](-) (Hacac=acetylacetone): {[{Ni(tren)}{Ru(acac)(2)(CN)(2)}][ClO(4)].CH(3)OH}(n) (1) (tren=tris(2-aminoethyl)amine), {[{Ni(cyclen)}{Ru(acac)(2)(CN)(2)}][ClO(4)].CH(3)OH}(n) (2) (cyclen=1,4,7,10-tetraazacyclododecane), {[{Fe(salen)}{Ru(acac)(2)(CN)(2)}]}(n) (3) (salen(2-)=N,N'-bis(salicylidene)-o-ethyldiamine dianion) and [{Mn(5,5'-Me(2)salen)}(2){Ru(acac)(2)(CN)(2)}][Ru(acac)(2)(CN)(2)].2CH(3)OH (4) (5,5'-Me(2)salen=N,N'-bis(5,5'-dimethylsalicylidene)-o-ethylenediimine). Compounds 1 and 2 are 1D, zigzagged NiRu chains that exhibit ferromagnetic coupling between Ni(II) and Ru(III) ions through cyano bridges with J=+1.92 cm(-1), zJ'=-1.37 cm(-1), g=2.20 for 1 and J=+0.85 cm(-1), zJ'=-0.16 cm(-1), g=2.24 for 2. Compound 3 has a 1D linear chain structure that exhibits intrachain ferromagnetic coupling (J=+0.62 cm(-1), zJ'=-0.09 cm(-1), g=2.08), but antiferromagnetic coupling occurs between FeRu chains, leading to metamagnetic behavior with T(N)=2.6 K. In compound 4, two Mn(III) ions are coordinated to trans-[Ru(acac)(2)(CN)(2)](-) to form trinuclear Mn(2)Ru units, which are linked together by pi-pi stacking and weak Mn...O* interactions to form a 1D chain. Compound 4 shows slow magnetic relaxation below 3.0 K with phi=0.25, characteristic of superparamagnetic behavior. The Mn(III)...Ru(III) coupling constant (through cyano bridges) and the Mn(III)...Mn(III) coupling constant (between the trimers) are +0.87 and +0.24 cm(-1), respectively. Compound 4 is a novel single-chain magnet built from Mn(2)Ru trimers through noncovalent interactions. Density functional theory (DFT) combined with the broken symmetry state method was used to calculate the molecular magnetic orbitals and the magnetic exchange interactions between Ru(III) and M (M=Ni(II), Fe(III), and Mn(III)) ions. To explain the somewhat unexpected ferromagnetic coupling between low-spin Ru(III) and high-spin Fe(III) and Mn(III) ions in compounds 3 and 4, respectively, it is proposed that apart from the relative symmetries, the relative energies of the magnetic orbitals may also be important in determining the overall magnetic coupling in these bimetallic assemblies.

Objective: Patient with myocardial bridging (MB) usually has a benign prognosis, but some MB patients might experience myocardial ischemia, infarction and sudden cardiac death, especially during active physical activities. The purpose of the study was to study the stress-induced blood flow changes of the mural coronary artery in MB patients determined by intracoronary Doppler., Methods: In 8 patients with MB, the basic average peak velocity (bAPV), hyperemic average peak velocity (hAPV) of blood flow, coronary flow reverse (CFR) proximal and distal to the mural coronary artery were measured before and during intravenously dobutamine (10 microg kg-1 min-1, then add 10 microg kg-1 min-1 at 3 min interval till 40 microg kg-1 min-1) by intracoronary Doppler., Results: The baseline mural coronary diameter reduction was (51.7+/-21.4)% and significantly increased to (90.0+/-12.7)% (P<0.01) during dobutamine infusion. bAPV on the segments proximal and distal to the mural coronary artery significantly increased from (19.83+/-5.84) cm/s and (20.75+/-4.91) cm/s to (31.52+/-10.93) cm/s and (30.46+/-9.01) cm/s (all P<0.05 vs. baseline) respectively post dobutamine infusion. CFR measured at proximal and distal to myocardial bridging also significantly decreased from (2.91+/-0.62) and (2.46+/-0.82) to (2.17+/-0.66) and (1.83+/-0.51) (all P<0.01)., Conclusion: Stress can significantly increase the compression of intramural coronary artery and reduce CFR on coronary segments both proximal and distal to the MB. Thus, active exercise might induce myocardial ischemia in patients with myocardial bridging.