Search

The existing problem of photovoltaics (PV) seeks new efficient materials that can feed to the next level solar power generation under access universally. This study proposed the magnetic nanoparticles (NPs) of barium mono ferrite BaFe2O4 with transition metal Zn, nominated for its electrical properties to explore incorporation's effect on structural, physicochemical, and magnetic properties to develop the dynamics of charge carriers, stability, and possibly tackling the need of new competent materials for PV technology. ZnO nanoparticles are widely used in solar cells with wide band gap (3.1 eV to 3.37 eV), an optimized value as low as 1.35 eV was successfully achieved in the present work. BaFe2O4 NPs exposing orthorhombic system for photovoltaic application was surveyed for the first time to the best of our knowledge. The nanoparticles of Ba1−xZnxFe2O4 (x = 0.0, 0.2, 0.3, 0.5) scheme have been prepared by the sol–gel auto-combustion method. An inclusive structural examination has been executed for prepared samples by X-ray diffraction and RAMAN study. The rarely found orthorhombic crystal system with Pnma-62 was identified and a 3D visualization was drawn for the first time for BaFe2O4. The magnetic, dielectric, photovoltaic (PV), and optical properties using Vibrating sample magnetometer, Impedance Analyzer, Fluorescence spectrophotometer, and UV Visible diffuse reflectance spectroscopy correspondingly were also explored. The effectively aimed composition (Ba0.8Zn0.2Fe2O4, Ba0.7Zn0.3Fe2O4, and Ba0.5Zn0.5Fe2O4) revealing spherical NPs and the chemical bonds were verified by Energy dispersive X-ray spectroscopy, Scanning electron microscopy, and Fourier transform infrared spectrometer individually. Znx = 0.3 sample showed maximum magnetization of 15.3 emu/g with responsive polarization. The similar sample's photocurrent increased when it was illuminated, as per photovoltaic data of current–voltage curves measured by Electrochemical impedance spectroscopy. The energy band gaps for pristine sample decreased from 1.51 to 1.35 eV for Znx = 0.3, which was closer to a theoretical optimum band gap value of about 1.4 eV for PV cells. The photoluminescence emission also lied in the visible range 607 nm. A concept for the use of magnetic NPs in PV devices was offered by valuable optical, magnetic, and photovoltaic capabilities cooperating well in the improvement of the outcome and expresses the importance of barium mono ferrite nanoparticles for aimed application. [ABSTRACT FROM AUTHOR]

In high-speed microelectronic communication, efficient and reliable radome-enclosed antenna performance is highly desired, which depends on consistent dielectric, mechanical properties, and low moisture absorption. The purpose of this study is to investigate the dielectric properties of fiber-polymer matrix composite (PMC) radome over wideband frequency and the impact of environmental aging on its performance. The dielectric constant (εr) of the SF/E0.8 (80% fiber loading) composite radome material decreased to 4% from its original value (3.93), and dielectric loss (δ) was reduced by 11% from 0.035 (2-18 GHz), while SEM morphology indicated fair interface bonding. Employing the Hallberg and Peck model, equivalent aging time (5-25 years), upon accelerated environmental aging, εr was increased up to 3.69%, δ to 9.68%, and the moisture uptake in the SF/E0.8 composite was increased from 1.13% to 1.67%, while tensile strength was retained up to 90.62% of its original value (147.83 MPa), compression strength up to 93.56% of its original value (388.54 MPa), flexural strength up to 85.44% of its original value (286.77 MPa), and interlaminar shear strength up to 77.66% of its original value (22.03 MPa), respectively. SF/E0.8 radome-enclosed antenna gain was decreased to 1%, and the voltage standing wave ratio (VSWR) was increased to 1.04% from their original values. This gradual and small deviation of SF/Ex composite properties and radome electrical performance over the extended aging time is referred to as reliable and effective for radome applications. [ABSTRACT FROM AUTHOR]

This work is aimed at studying the drug delivery applications of iron oxide (Fe3O4) nanoparticles with strontium (Sr) doping with varying molar ratios prepared by the co-precipitation route. The impact of increased strontium content on the particle size and magnetic properties was investigated. The impending of these nanoparticles for drug loading, drug release, and their respective cytotoxicity was also inspected. First, iron oxide nanoparticles were doped with various amounts of strontium, from 0.25, 0.50, and 0.75, to 1 mol using co-precipitation method. These synthesized nanoparticles were characterized by XRD, SEM, EDX, VSM, and FTIR for evaluating crystal structure, phase purity, morphology, composition, magnetic properties, and functional groups, respectively. Drug loading and drug release properties were determined using UV–vis spectroscopy, whereas MTT assay evaluated cytotoxicity. Colloidal stability was assessed using zeta potential in PBS solution. The findings confirmed the successful doping of iron oxide with strontium via XRD and EDX. SEM results confirmed spherical morphology for all and needle-like structure for 1 mol strontium doped sample. For VSM results, a single domain structure was established. It was also observed that the drug encapsulation efficiency increases with increased strontium content. Cytotoxicity results by MTT assay revealed increased cytotoxicity with increasing nanoparticle concentration, and ibuprofen-loaded nanoparticles showed higher cytotoxicity than un-loaded nanoparticles at the same concentration. Zeta potential results showed colloidal stability of iron oxide nanoparticles increased by the addition of strontium. This study provided predominantly comparison of the cytotoxicity of ibuprofen-loaded and non-loaded nanoparticles on Hep-2 cancer cells at similar concentrations for the first time for both Fe3O4 particles and Sr-doped Fe3O4 nanoparticles and enclosed the impact of increasing Sr doping content on Fe3O4 nanoparticles. [ABSTRACT FROM AUTHOR]