Search

Purpose: To evaluate, through in vitro studies, the bond strength of vitreous and hybrid ceramics with self-etching surface treatment compared to conventional treatment., Methods: This systematic review followed the preferred reporting items for systematic reviews and meta-analyses (PRISMA) and was registered on the open science framework (OSF) platform for in vitro studies. A population, intervention, control, and outcome (PICO) question was formulated: "Does the surface conditioning of glass and hybrid ceramics with self-etching silane present a bond strength similar to that of conventional bonding?". A literature search was carried out in the PubMed, Embase, Web of Science, Cochrane Library, and ProQuest databases until September 2023. The Joanna Briggs Institute (JBI) critical appraisal guidelines for quasi-experimental studies were used for risk assessment of bias. The meta-analysis was based on the inverse variance (IV) method (p < 0.05)., Results: A total of 29 in vitro studies published between 2017 and 2022 were included in this systematic review, totaling 1889 ceramic samples. The meta-analysis indicated a significant decrease in the bond strength of HF 4%-5% with silane compared to self-etching (p < 0.05; MD: 0.34; 95% CI: 0.13-0.35; I 2 = 3%, p = 0.42), while it indicated that there was no significant difference between self-etching compared to 9%-10% HF with silane (p = 0.92; MD: 0.02; 95% CI: -0.32 to 0.36; I 2 = 14%, p = 0.32)., Conclusion: Self-etching primer presents bond strength that is superior to or similar to conventional surface treatment on glass and hybrid ceramics., (© 2024 by the American College of Prosthodontists.)

This study aimed to evaluate in vitro the degree of surface smoothness provided by two different polishing techniques and the effect of acid challenge on the alteration of surface roughness (Ra), microhardness (Knoop), and color ( Δ E 00 ) of three nanoparticulate composites, simulating 1 year of exposure to hydrochloric acid (HCl). Eighty specimens for each composite were divided into four groups ( n  = 240), being control without polishing, control with wear, WPC (wear + polishing with Cosmedent Kit), and WPB (wear + BisCover LV liquid polish). Repeated measures ANOVA was applied for Ra and Knoop Microhardness. For the color ( Δ E) three-way ANOVA was applied. In cases of statistically significant the Tukey posttest was applied ( α  = 0.05). Both types of polishing tested resulted in a surface smoothness below the critical value established by the studies (Ra ≥ 0.2  μ m), even after immersion. The microhardness of all composite resins decreased after the challenges. The specimens immersed in HCl showed a lower microhardness (42.2 Kgf/mm 2 ) when compared to the specimens immersed in artificial saliva (44.7 Kgf/mm 2 ). Regarding the color change, the composites presented values compatible with clinical acceptability, with a statistically significant difference only between the control group and the other types of polishing for the Z350 XT resin ( Δ E 00  = 3.78). It was concluded that both mechanical and chemical polishing produced a satisfactory surface smoothness, even after immersions in artificial saliva and HCl. The microhardness of the composites was affected by the challenges and the composites tested were within clinical acceptability with regard to color change., Competing Interests: The authors declare that there are no conflicts of interest regarding the publication of this article., (Copyright © 2024 José Roberto Vergínio de Matos et al.)

Background: In several countries, the leaf juice of Agave sisalana (also known as sisal) is widely used topically, especially as an antiseptic, and orally for the treatment of different pathologies. However, in Brazil, which is the largest producer of Agave sisalana, its residue, which represents the majority of its weight, has been thrown away. For this reason, the determination of the pharmacological and toxicological potentials of sisal residue and its possible therapeutic use is seen as a way to contribute to the sustainable development and social promotion of the largest producer of sisal in Brazil, the interior of Bahia State, which is among the poorest areas in the country. Given the scarcity of available scientific studies on the pharmacological and toxicological properties of sisal residue juice, this study aimed to promote the acid hydrolysis of this juice to potentiate the anti-inflammatory effect already described in the literature. Furthermore, it aimed to evaluate the toxicological profile of the hydrolyzed extract (EAH) and to determine its acute toxicity, as well as its side effects on the reproductive aspects of rats., Method: The anti-inflammatory effect of EAH was evaluated in vitro using the induction of hemolysis by hypotonic solution and in vivo in rats using the carrageenan-induced paw edema test and the xylene-induced ear edema test. The acute toxicity, resulting from a single-dose administration, was investigated for some manifestation of toxic symptoms related to motor control and consciousness in rats. At a concentration of 100 mg/kg, by repeated doses, the reproductive toxicity effects of EAH in rats were assessed., Results: In vitro anti-inflammatory activity was positive using the human red blood cell membrane stabilization method. In both in vivo tests used to assess the anti-inflammatory activity, EAH (at three doses) significantly inhibited edema when compared to the control group. At a dose of 50 mg/kg, EAH exhibited a greater effect than indomethacin, a nonsteroidal anti-inflammatory drug with known activity. In vivo toxicological studies have shown that EAH does not present toxic effects when administered orally in a single dose, up to 1000 mg/kg. Finally, EAH promoted a gonadotoxic effect and increased the embryonic mortality rate after implantation., Conclusions: It is suggested that the anti-edematogenic effect of the acid hydrolysis extract from sisal juice is due to the high concentration of steroidal sapogenins. Therefore, this extract can be considered a potential new anti-inflammatory or even an important sapogenin source for the development of steroidal glucocorticoids. However, further studies are needed to elucidate the chemical composition of sisal juice. Regarding toxicology studies, EAH did not show cytotoxic and clastogenic potentials, but it presented a powerful reproductive toxic effect in rats.

Background: To verify if there is a correlation of excessive daytime sleepiness (EDS) with bruxism, depression, anxiety, stress, and sex in odontology students., Material and Methods: Four hundred dental students were selected. Students included in the study were those that were healthy, over 18 years old, and with similar weekly academic activities. Students excluded were those with temporomandibular disfunction, a high possibility of possessing obstructive sleep apnea and illnesses that cause EDS; along with smokers, users of illicit drugs, users of psychiatric medication, and those that abuse the consumption of alcohol. After the application of these criteria, 128 students were included in this study. EDS, bruxism, depression, anxiety, and stress were evaluated by the Epworth Sleepiness Scale, the Pintado et al. questionnaire, Beck Depression Inventory, Beck Anxiety Inventory, and the LIPP Adult Stress Symptom Inventory. Afterwards, the Spearman test ( p < 0.05) was applied., Results: A high probability of EDS was present in 33.6% of the students. There was a positive correlation of EDS with females (Rank Correlation= 0.209; p = 0.018) and depression (Rank Correlation= 0.174; p = 0.049); between females and stress (Rank Correlation= 0.199; p = 0.024), and between females and anxiety (Rank Correlation= 0.178; p = 0.045). There was a positive correlation of bruxism with anxiety (Rank Correlation= 0.255; p = 0.004) and stress (Rank Correlation= 0.201; p = 0.023). There was no correlation of EDS with bruxism ( p = 0.354), stress ( p = 0.277), or anxiety ( p = 0.114). There was no correlation of bruxism with females ( p = 0.082) or depression ( p = 0.362)., Conclusions: A high probability of EDS was present in 33.6% of dentistry students, and there was a positive correlation of EDS with females and depression. Key words: Bruxism, depression, anxiety, stress, disorders of excessive somnolence, dentistry., Competing Interests: Conflicts of interest The authors declare they have no conflict of interest., (Copyright: © 2022 Medicina Oral S.L.)

Purpose: To evaluate the adhesion of Streptococcus mutans (S. mutans) on lithium disilicate ceramics, submitted to different intraoral polishing protocols, and the degree of surface smoothness obtained., Materials and Methods: Fifty lithium disilicate specimens were divided into 5 groups (n=10): G1-Glaze Group (positive control); G2-Glaze Group + Wear + Glaze; G3-Wear Group (negative control); G4-Ceramisté Wear Group; G5-Optrafine Wear Group. Surface roughness (Ra - μm) was evaluated and the surface characteristics were assessed using a scanning electron microscope (SEM); to assess S. mutans biofilm, the number of cultured cells was evaluated by counting colony-forming units (CFU/mL). The data underwent one-way ANOVA followed by Tukey's test (P⟨.05)., Results: There was a significant difference in the surface roughness of all groups compared with G3. There was no significant difference between the G4 and G5 groups that received polishing. G1 group had the lowest mean roughness values. There was a difference in Log values (CFU/mL) between the G3 group and the groups that received glaze (G1 and G2). The G3 group had the highest adhesion of S. mutans (4.53 Log)., Conclusion: The most effective polishing protocol after wear is glazing, presenting the lowest roughness and CFU/mL values., (Copyright© 2022 Dennis Barber Ltd.)

Background: To determine whether there is a correlation of bruxism (sleep, daytime, or both) with oral health-related quality of life and facial pain of muscular origin in dentate individuals., Material and Methods: Seventy-four dentate patients (complete dentition) were included in this study. These individuals had pain in the facial muscles due to temporomandibular disorder (TMD). Smokers; and those with obstructive sleep apnea, TMD of joint origin associated or not with pain, malocclusion, and cancer; and users of illicit drugs, psychiatric medications, and alcohol were excluded. Obstructive sleep apnea, bruxism (of sleep and/or daytime), facial muscle pain, and oral health-related quality of life were assessed by the following questionnaires: Berlin Questionnaire, Pintado et al . questionnaire, VAS (Visual Analog Scale) facial muscle pain questionnaire, and Oral Health Impact Profile - 14. Four groups were created: 1) no bruxism; 2) sleep bruxism; 3) daytime bruxism; and 4) sleep and daytime bruxism. Spearman's correlation test was applied to verify if there was a correlation between the collected data. P values less than 0.05 were considered statistically significant., Results: There was a positive correlation of daytime bruxism with mean pain in the last 3 months ( P <0.05) and the worst pain experienced in the last 3 months ( P <0.05)., Conclusions: Bruxism (sleep, daytime, or both) showed a positive correlation with lower oral health-related quality of life ( P <0.05). Key words: Bruxism, facial pain, temporomandibular joint disorders, surveys and questionnaires, health-related quality of life., Competing Interests: Conflicts of interest The authors declare they have no conflict of interest., (Copyright: © 2022 Medicina Oral S.L.)

Statement of Problem: Biofilms can be retained on dental prostheses leading to the development of infections. The indiscriminate use of antifungal drugs can result in the development of microorganisms that are resistant to these antimicrobial agents. Whether probiotics are a suitable alternative for reducing the prevalence of oral candidiasis is unclear., Purpose: The purpose of this in vitro study was to evaluate the influence of 6 different live strains of probiotics and 2 commercially available probiotic supplements used for inhibiting the growth of Candida albicans biofilm in heat-polymerized acrylic resin denture base material and to determine whether biofilm byproducts modify the surface of specimens., Material and Methods: Biofilms of C. albicans were formed on acrylic resin specimens in the presence of probiotics and quantified by colony-forming units (CFUs), and the surface roughness (Ra) of the specimens was assessed before and after the formation of biofilms. The CFU and roughness data were analyzed by analysis of variance and the Tukey HSD test (α=.05)., Results: A significant decrease in the number (CFU/mL) of C. albicans cells was found when they were cultured with 4 probiotics: B. lactis (P=.045), B. longum (P<.001), L. casei (P<.001), and L. helveticus (P<.001) and with the commercially available probiotic Prolive (P=.05). The Ra of specimens decreased after exposure to different microbial biofilms (P≤.05) except in 3 experimental groups., Conclusions: In general, the tested probiotics had an antagonistic effect on the growth of C. albicans, and the surface of acrylic resin was altered after exposure to biofilm byproducts., (Copyright © 2020 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.)

The objective of the study was to evaluate the cytotoxicity and effect of curcumin-cinnamaldehyde hybrids (CCHs) on the biofilm of oral pathogens. Of the 18 hybrids tested, nine had an inhibitory effect on at least one of the bacterial species tested, with minimal inhibitory and bactericidal concentrations ranging from 9 to 625 μg ml -1 . CCH 7 promoted a potent inhibitory effect against all the bacterial species tested and better compatibility than chlorhexidine (CHX). CCH 7 also presented a similar or improved effect over that of CHX, causing a reduction in bacterial metabolism and viability in single and dual-species biofilms. CCH 7 reduced by 86% and 34% the viability of multispecies biofilms formed by collection and clinical strains. It can be concluded that CCH 7 was cytocompatible at the minimal inhibitory concentration, presented anti-biofilm action against oral pathogens, and could act as an antimicrobial agent for application in endodontics.

Objective: This study aimed to evaluate the dimensional stability and maintenance of details of conventional and high stability alginates up to 5-day storage., Methods: Two types of alginates were selected (n=10) for this study, conventional (Hydrogum) and high stability alginates (Hydrogum 5), which were produced with the aid of a cylindrical metal block and a ring-shaped metal mold (Specifications 18, 19, and 25, ANSI/ADA). Ten images were obtained from the molds for the dimensional stability test, which were taken immediately after their production and at each different storage periods (15 min, 24 h, 48 h, 72 h, 96 h, and 120 h) by a digital camera. The specimens were kept hermetically sealed in plastic bags (23°C) and then used to obtain 140 (n=70) dental stone models, used in the detail reproduction test, in which the angular accuracy of three grooves (20 µm, 50 µm, and 75 µm) was observed at each period. The details reproduction accuracy was classified using a predetermined score classification. Measurements of dimensional changes were made in the Corel DRAW X6 program. The data were submitted to the Student's t-test (α?#8197;= 0.05)., Results: A statistically significant difference concerning the size of the matrix was observed after 24h for both alginates, and a statistically significant negative linear dimensional change (contraction) was verified after 24 h of storage (1.52% for the high stability alginate, and 1.32% for the conventional alginate). The high stability alginate kept the full details for 72 hours, while the conventional alginate, for 24 h. Both alginates reproduced the 75 µm groove at all storage periods., Conclusion: Impressions made with both alginates presented satisfactory clinical results when the alginates were immediately poured.

Purpose: The aim was to evaluate the effect of four acidic beverages on the roughness (Ra) and color change (ΔE ab ) of two brands of artificial teeth and a heat-polymerized acrylic resin (HPAR) for use in a prosthetic base., Materials and Methods: All materials were divided into 5 groups, according to the used acidic beverage (artificial saliva - control, red wine, orange juice, coke-based, and lemon juice-based soft drink). The immersion process was divided into two stages: T1 - immersion in the acidic solutions for 10 minutes for 14 days; T2 - after T1, the samples were immersed in grape juice for 14 days. The Ra of the samples was evaluated in a rugosimeter and the ΔE ab in a spectrophotometer, before and after the immersions. The analysis of variance of one (ΔE ab ) and two factors (Ra) and Tukey were performed (α=.05)., Results: There was a statistical difference for roughness after immersion (T1) for Trilux and Tritone teeth, regardless of the acid solution. For Trilux teeth, all acid solutions increased Ra ( P <.05). For Tritone teeth, only the coke-based soft drink did not statistically change Ra. Grape juice (T2) altered Ra only of artificial teeth ( P <.05). The color was changed for all materials, after T1 and T2., Conclusion: In general, the acidic solutions changed the Ra and ΔE ab of HPAR and artificial teeth after T1. The grape juice altered the roughness only of the artificial teeth, promoting a clinically acceptable color change in the materials., (© 2020 The Korean Academy of Prosthodontics.)

Although the effectiveness of some mouthwashes has been proven, phytotherapy is still a field to be explored as an alternative to commercial products., Objective: To evaluate, in vitro, the cytotoxicity and efficacy of two solutions based on citronella oil (CN), on S. aureus and C. albicans biofilms (in formation-adhesion phase and 24 h-biofilm formation) on acrylic resin and nickel-chromium alloy samples (one trademark of each material), compared to two alcohol-free commercial mouthwashes., Material and Methods: Two solutions containing CN at concentrations of 5x and 10x the minimum bactericidal/fungicidal concentration (MBC/MFC) were prepared by microdilution. After contamination of the samples surfaces with these microorganisms, the mouthwashes (CN - 5x and 10x; CHX - 0,12% alcohol-free chlorhexidine and LT - alcohol-free essential oils) were evaluated. Mouthwash simulation was performed for 1 min at two moments, the first simulation after 4 h of microbial adhesion and 24 h-biofilm formation, and the second simulation, 6 h after the first simulation. For biofilm quantification, the number of cultured cells was evaluated by CFUs. The cytotoxicity assay was performed on HaCat epithelial cells and quantified by the MTT method., Results: Tested solutions completely inhibited the growth of both microorganisms in the adhesion phase. All solutions showed inhibitory activity against 24 h-biofilm formation. However, CN led to greater microbial reduction, regardless of the surface of the sample. All solutions demonstrated a toxic effect. However, after serial dilution, CN presented the lowest cytotoxic effect., Conclusion: Citronella had a lower cytotoxic effect and a higher action compared to commercial solutions., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

The purpose of this study was to identify and analyse the micro-organisms present in the conjunctival secretion in anophthalmic cavities of wearers of ocular prostheses, as well as on the prostheses used by them, correlating them with the microbiota of the contralateral eye. Nine patients with maxillofacial abnormalities, wearers of an acrylic resin ocular prosthesis participated in the study. Collections of conjunctival secretions and biofilm were performed on the prosthesis, anophthalmic cavity and contralateral eye for the mycological and bacterial analyses. The data were submitted to statistical analysis, performing a Kendall correlation test to identify the correlation between the collection site and the identified micro-organism (P < 0·05). It was verified that the most prevalent micro-organisms were the Staphylococcus aureus and Staphylococcus epidermidis, independent of the collection site, and that negative cultures for fungi were encountered in 85·2% of collections, independent of the region. It was not possible to establish a correlation among the types of micro-organisms and the collection sites., Significance and Impact of the Study: Some evidence suggests that the surface roughness of ocular prostheses can influence interactions with micro-organisms, with greater prejudicial consequences, such as the establishment of biofilms, which could lead to infections. Thus, it becomes extremely important to identify the micro-organisms present on the acrylic surfaces of ocular prostheses, as well as the microbiota of the anophthalmic cavity and contralateral eye of wearers of the same, so that subsequent control measures promote the homeostatic maintenance of the ocular region., (© 2017 The Society for Applied Microbiology.)

Statement of Problem: The stability of the optical characteristics of dental ceramics is essential. Degradation of these materials resulting from pH or temperature alterations in the oral cavity can lead to treatment failure., Purpose: The purpose of this in vitro study was to evaluate the color change (ΔE), the L* coordinate, the translucency parameter, and the contrast ratio of lithium disilicate ceramic exposed to commonly used and potentially colorant solutions., Material and Methods: Fifty lithium disilicate specimens were prepared and divided into 5 groups according to the immersion solution (artificial saliva, orange juice, cola, coffee, and red wine). Immersions in acidic beverages were alternated in a thermocycler with artificial saliva. The control group was immersed in artificial saliva at 37°C throughout the immersion period. After 168 hours of immersion, the color parameters were assessed with a spectrophotometer and calculated using the because system on 2 backgrounds (black and white) and in 2 time periods, before thermocycling and after thermocycling. Data were submitted to analysis of variance followed by the Tukey honest significant difference test (α=.05)., Results: Greater color change (ΔE) and lower L* coordinate values were observed after immersion in orange juice and cola. Regarding the translucency parameter and contrast ratio, the immersion in coffee resulted in greater opacity and lower translucency of the material., Conclusions: Alterations in the color stainability, the L* coordinate values, the translucency parameter, and the contrast ratio of the lithium disilicate ceramic were observed, according to the acidic solutions tested., (Copyright © 2016 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.)

Paresthesia is defined as an alteration in local sensibility, associated with numbness, tingling, or unpleasant sensations caused by nerve lesions or irritation. It can be temporary or permanent. The treatment protocol for facial paresthesia is primarily based on the use of drugs and implant removal, which may not be completely effective or may require other risk exposure when there is no spontaneous regression. However, other therapeutic modalities such as acupuncture can be used. The aim of this study is to report a case of a patient with paresthesia of the inferior alveolar nerve and pain caused by an implant surgery performed 2 years earlier. The patient received acupuncture treatment during 4 months of weekly sessions. Six points were used: Large Intestine (LI4), Large Intestine (LI11), Stomach (ST36), Liver (LR3), Extra Head and Neck (E-HN-18), and Stomach (ST5). The visual analog scale was used before and after each session for the analysis of paresthesia and pain, together with assessment of the paresthesia by delimitation of the desensitized region of the skin and presented discomfort. Pain remission and reduction in the size of the paresthesia area occurred after four sessions., (Copyright © 2017 Medical Association of Pharmacopuncture Institute. Published by Elsevier B.V. All rights reserved.)

Objective: To compare electrical activity in the anterior temporal and masseter muscles on the habitual (HMS) and non-habitual mastication side (NHMS), during mastication and in the mandibular postural position. In addition, the increase in electrical activity during mastication was assessed for the HMS and NHMS, analysing both working (WSM) and non-working side during mastication (NWSM)., Methods: A total of 28 healthy women (18-32 years) participated in the study. They were submitted to Kazazoglu's test to identify the HMS. Bioresearch 'Bio EMG' software and bipolar surface electrodes were used in the exams. The exams were conducted in the postural position and during the unilateral mastication of raisins, on both the HMS and NHMS. The working and non-working side on HMS and NHMS were assessed separately. The obtained data were then statistically analysed with SPSS 20.0, using the Paired Samples Test at a significance level of 95%., Results: The differences in the average EMG values between HMS and NHMS were not statistically significant in the postural position (Temporal p=0.2; Masseter p=0.4) or during mastication (Temporal WSM p=0.8; Temporal NWSM p=0.8; Masseter WSM p=0.6; Masseter NWSM p=0.2). Differences in the increase in electrical activity between the masseter and temporal muscles occurred on the working side, on the HMS and NHMS (p=0.0), but not on the non-working side: HMS (p=0.9) and NHMS (p=0.3). The increase in electrical activity was about 35% higher in the masseter than in the temporal muscle., Conclusions: Mastication side preference does not significantly impact electrical activity of the anterior temporal and masseter muscles during mastication or in postural position., (Copyright © 2016. Published by Elsevier Ltd.)

Statement of Problem: Dentists often note problems with infection in patients with maxillofacial prostheses. Conventional disinfection protocols are not always effective and may alter the properties of the polymer used in the prosthesis. Thus, the search for improved disinfection methods is important., Purpose: The purpose of this in vitro study was to evaluate and compare the antimicrobial activity of conventional disinfectant solutions (water and neutral soap and 4% chlorhexidine) and plant extracts (Cymbopogon nardus and Hydrastis canadensis) on specimens of maxillofacial silicone contaminated with Candida albicans and Staphylococcus aureus biofilms., Material and Methods: Seventy-two silicone (MDX4-4210) specimens were fabricated (5×2 mm) and sterilized. Thirty-six were contaminated with C albicans (10(6) cells/mL) and 36 with S aureus (10(8) cells/mL) to evaluate the antimicrobial activity of the cleaning protocols. After incubation (37°C/72 hours), the specimens were divided into 5 groups: not disinfected (positive control), soaking in saline solution for 10 minutes, soaking in 4% chlorhexidine for 10 minutes, soaking in C nardus for 10 minutes, soaking in H canadensis for 10 minutes, and washing by hand with water and neutral soap for 30 seconds. The viability of cells was evaluated by XTT (2,3-bis-(2-methoxy-4-nitro-5-sulfophenyl)-2H-tetrazolium-5-carboxanilide) assay and by scanning electron microscope analysis. The results were analyzed by ANOVA and the Tukey HSD test (α=.05)., Results: All disinfection solutions provided a statistically significant reduction in biofilm viability compared with the control group for both microorganisms (P<.05). Washing with water and neutral soap was significantly more effective in reducing biofilm viability than immersion in the disinfection solutions, with persistence of viable microorganisms between 1.05% for C albicans and 0.62% for S aureus after this cleaning protocol. Photomicrographs revealed that 4% chlorhexidine altered the surface of the polymer., Conclusions: Within the limitations of this in vitro study, it was concluded that the cleaning protocols with different disinfectant solutions produced a significant reduction in the viability of C albicans and S aureus biofilms on the silicone polymer. Washing with water and neutral soap was the most effective protocol against both microorganisms., (Copyright © 2016 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.)

Statement of Problem: Silicone elastomers undergo physical and chemical degradation with disinfecting solutions. Phytotherapy may be a suitable solution for disinfection. However, its effect on the properties of the silicone material is unknown., Purpose: The purpose of this in vitro study was to evaluate the effect of disinfection with conventional and plant-extract solutions and of artificial aging on the hardness and color stability of a facial silicone associated with pigments and an opacifier., Material and Methods: Four hundred specimens of silicone (MDX4-4210) were fabricated (5×6 mm). Two pigment shades and 1 dry opacifier were combined in the tested material, and 4 groups (n=10) were obtained: colorless (GI), colorless with opacifier (GII), medium pigment with opacifier (GIII), and black pigment with opacifier (GIV). Specimens were subjected to disinfection (30 days) using saline solution, water, and neutral soap (digital friction, 30 seconds), chlorhexidine 4%, Hydrastis canadensis, and Cymbopogon nardus extracts (immersion, 10 minutes). Shore A hardness (ASTM D2240) and color analyses were performed before and after disinfection. Specimens were then exposed to 1008 hours of artificial aging (ASTM 53) and subjected to final hardness and color readings. The results were analyzed with ANOVA and the Tukey significant difference test (α=.05)., Results: The opacifier increased the hardness (GII). For GII, the H. canadensis solution and the friction with water and soap promoted significantly reduced hardness; the friction also promoted a reduction in this property for GIV. The GIII was not affected after disinfection. A significant difference was found between the ΔE values of the specimens disinfected with H. canadensis, C. nardus, and chlorhexidine, and specimens subjected to saline solution and neutral soap., Conclusion: The hardness of MDX4-4210 after the experimental procedure was considered clinically acceptable for facial prostheses. All groups showed clinically unacceptable color alterations regardless of the disinfecting solution., (Copyright © 2016 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.)

Aim: To evaluate the effect of 37% carbamide peroxide on the bond strength of conventional or resin-modified glass-ionomer cements when used as a cervical barrier in endodontically-treated teeth., Materials and Methods: After root canal instrumentation and obturation, 40 specimens of the cement-enamel junction were obtained after transversal root canal sectioning from human extracted canines. The root canal specimens were standardized and filled with the following materials (n = 10, each group): G1: zinc phosphate (control), G2: Ketac glass-ionomer, G3: vitrebond glass-ionomer or G4: GC GL glass-ionomer. After 24 hours, the specimens were subjected to an application of 37% carbamide peroxide for 21 days, changed each 7 days and stored in an artificial pulp chamber. The specimens were then submitted to push-out bond strength testing with an electromechanical test machine (EMIC) and the failure mode in each specimen was analyzed with confocal microscopy (LEXT)., Results: G3 and G4 showed higher bond strengths values than the other groups (p < 0.05), and were similar to each other (p > 0.05). G1 showed the lowest bond strength value (p < 0.05)., Conclusion: Glass-ionomer cements showed higher bond strength values than the zinc phosphate cement, and resin-modified glass-ionomer cements presented the highest push-out values to root canal dentin (GC, GL and Vitrebond)., Clinical Significance: Glass ionomer cements are recommended to use as cervical barrier materials before the internal dental bleaching, but its efficiency is questionable.

Objective: The aim of this study was to evaluate the influence of oral contraceptive use on the silent period (SP) of anterior temporal and masseter muscles during the menstrual cycle., Materials and Methods: Totally, 28 women on reproductive age were selected including 15 nonusers of any hormone and 13 contraceptive users. All patients were dentate without muscular temporomandibular disorders. Electromyography (SP test) of the anterior temporal and masseter muscles was conducted every week during three consecutive menstrual cycles at 1(st) day of menstruation (P1), 7(th) day (P2), 14(th) day (P3) and 21(st) day (P4)., Results: The SP values in the anterior temporal and masseter muscles were measured at both sides. The SP values of the right side (13.49 ms) at P2 were significantly different compared to the left side (12.28 ms). However, there was no significant difference on the interactions among the three factors., Conclusion: It can be concluded that the SP values in healthy women in reproductive age may not be influenced by the menstrual cycle with similar results for both muscles.

This study examined the electrical activity of the superior (SO) and inferior (IO) orbicularis oculi muscles before and after installing ocular prostheses in patients who had undergone unilateral enucleation. Twelve volunteers requiring prostheses were selected. Their electrical activity was monitored at rest and during normal opening and closing of the eyelids, rapid opening and closing of the eyelids, and squeezing. Data were recorded before and 7, 30, and 60 days after the ocular prosthesis was installed. Two-way analysis of variance was performed to verify whether there were any significant differences between the muscles and periods, and means were compared by Tukey-Kramer honestly significant difference (HSD) tests (P < 0.05). Results from the initial period differed significantly from those after prosthesis installation in all clinical situations. The SO had significantly higher electrical activity levels than the IO in all clinical situations but squeezing. The authors observed the same values during the initial period for the condition of rest (SO 8.42/IO 5.93) and the highest values for the condition of squeezing after 60 days (SO 131.50/IO 117.12). Rehabilitative treatment promoted an increase in the electrical activity of the orbicularis oculi muscles, restoring part of the muscle tone and motor function to muscles of the affected area., (Copyright © 2014 International Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.)

The aim of this study was evaluate the biomechanical behaviour of prostheses screwed into conventional (0° angulation) and pre-angled experimental (8, 12 and 20°) external hexagon implants (13 × 4 mm) by photoelastic analysis. Eight casts were made in photoelastic resin. Casts were divided into groups of single crowns or three combined elements. Each unit was positioned in a circular polariscope. By using a universal testing machine, 100 N loads were applied in the axial and oblique (45°) directions to fixed points on the occlusal surfaces of the crowns. Generated stresses were recorded photographically and analysed qualitatively in a graphics program. In single-element prostheses, the number of high-stress fringes increased with increasing implant angle. However, in three-element prostheses, there was no difference in the stress distribution with implant angle, except for the 12° implant that had a higher degree of stress. For the other groups pre-angulation of the implant increases the concentration and intensity of stresses for single prosthesis and has similar stress distribution in three-element fixed prostheses.

The purpose of this literature review was to describe the main features of phantom eye syndrome in relation to their possible causes, symptoms, treatments, and influence of eye amputation on quality of life of anophthalmic patients. For this, a bibliographical research was performed in Pubmed database using the following terms: "eye amputation," "eye trauma," "phantom eye syndrome," "phantom pain," and "quality of life," associated or not. Thirteen studies were selected, besides some relevant references contained in the selected manuscripts and other studies hallowed in the literature. Thus, 56 articles were included in this review. The phantom eye syndrome is defined as any sensation reported by the patient with anophthalmia, originated anophthalmic cavity. In phantom eye syndrome, at least one of these three symptoms has to be present: phantom vision, phantom pain, and phantom sensations. This syndrome has a direct influence on the quality of life of the patients, and psychological support is recommended before and after the amputation of the eyeball as well as aid in the treatment of the syndrome. Therefore, it is suggested that, for more effective treatment of phantom eye syndrome, drug therapy should be associated with psychological approach.

The failure of facial prostheses is caused by limitations in the properties of existing materials, especially flexibility and durability. Therefore, this study evaluated the Shore A hardness of silicone used for fabrication of facial prostheses, Silastic MDX4-4210, according to the influence of storage period, daily disinfection, and 2 types of pigmentation. Thirty specimens were fabricated and divided in 3 groups: colorless, pigmented with makeup, and pigmented with iron oxide. Analysis of results was assessed on a Shore A hardness meter immediately, 6 months, and 1 year after fabrication of specimens, following the guidelines of the American Society for Testing and Materials. The hardness values were statistically analyzed by the Tukey test. The silicone exhibited an increase in hardness with time. However, the hardness was stable from 6 months to 1 year. It was concluded that the silicone is within the values of Shore A hardness reported in the literature, regardless of the storage period, pigmentation, and chemical disinfection.

The failure of facial prostheses is caused by limitations in the properties of existing materials, especially flexibility and durability. Therefore, this study evaluated the marginal deterioration of a silicone used for fabrication of facial prostheses (Silastic MDX4-4210, Dow Corning Corporation, Midland, MI, USA) according to the influence of artificial aging, daily disinfection, and 2 types of pigmentation. Thirty specimens were fabricated and subdivided in 6 groups: without pigmentation, pigmented with make-up powder and iron oxide, and evaluated with and without the action of the disinfectant. Analysis of marginal deterioration was performed on a scanning electron microscope (magnification, x5000) immediately 6 months and 1 year after fabrication of specimens, following the guidelines of ASTM International. After visual analysis of the photomicrographs, it was noticed that all groups presented marginal deterioration and alterations in surface texture with time. The use of disinfection did not contribute to the marginal deterioration of polymer (silicone), regardless of the pigmentation and artificial aging.